For those watching this video and not understanding why your other eye might not be blinking, remember to go back to Modeling drop down > Parameters > Blink and add your new eye variant (open and smile!). I was about ready to pull my hair out until I remembered LMAO. Hope this saves someone some stress.
Finally somebody who's doing tutorials and are not purposely being vague on rigging advice. I'll give you a sub just because and it looks like you have some good content overall. Thank you for this.
Thank you for going over Live2D in such detail. It's been really hard for me to learn and so many riggers are purposefully vague, seemingly to keep commission demand high LOL. I can't afford to pay for a model/rig so I've had to do everything myself, and your videos are amazing for learning! You've earned my sub. :)
Thank you so much for your guides! I'm starting off with the free trial version right now, so I had to skip the physics as I am limited on my Deformers and parameters. BUT I was able to follow along with everything else and I'm so happy! Slowly will be going over your other videos to keep going! Thanks again!
THANK YOU SO SO MUCH! THE RESULTS ARE IMMACULATE1 This is one of the best tutorials you are very very patient and made sure to show all the footage not many people do that so thank you very much!
Thankyou!!! I tried to follow some other guides before coming to yours but would always get lost and found people moved to fast, you go at the perfect pace and make sure we dont miss where your clicking etc. Thanks to you i've just finished my first set of eyes and im in love
I am writing from Turkey, your videos are very helpful, it started without knowing anything and it is very easy thanks to you, you teach very well yoshino-senseii :3
my model is uneven so the copy-pasting of movements isn't exactly helpful, but this series is way more helpful than the other videos I've seen that only tackle basics! Much platonic love! 💜💛
i can not express how thankful I am for your tutorials. you've made this program so easy to understand and showed how to do some really cool effects. ty so much
Thank you for such a detailed explanation and useful advice! If I may ask, your art’s edges are looking really realllly smooth, I was wondering how big do you setup your canvas? Thank you again!
Finally a tutorial where the explanations make sense to me!! Most vtuber artists who make these are good at Live2D but not the best at teaching and explaining Your explanations make so much more sense thank you (T^T) working on these with me and my friend
thank you so much, it was very easy to follow along and now my eyes are all nice and bouncy :) also made the ears go slightly down when the eyes are close
ur videos are honestly amazing and ive been binging them all, but i do have one question, when i copy and paste the eye and reflect it, it doesnt go right on the other eye, its like to the side, and when i try to fix it, it messes things up. how would i be able to fix this
Thanks so much! I have followed the first part of your tutorial and I'm so happy finally someone covered this topic and showed us how to do this. Your tutorials are very easy to follow and understand, I've subscribed to your channel, cause I love your content as well. May I ask would you do more tutorials in the future? :o
Okay, so, I know I'm late here, but I hope you can help. No matter what I do, the eye shines won't wiggle in the physics preview! I even used your exact numbers.
thank you for your amazing videos, they've helped me so much!!! though sometimes live2d makes me sad, a lot of my reflects havent worked during the rigging process and now the eye copy paste and flip didnt work, so I am having to try and do everything all over again for the other one ;-;
Hi, I have a small problem. The right eye is duplicated from the left eye and it works perfectly in the physics but in the cubism viewer the right eye doesn't blink and i dont know the cause of it or what went wrong. :( I also checked off the eye blinking settings for it and seperated all of the parameters.
I have no idea what I did wrong when it came to the fliping but it didn't work I followed the steps correctly, are you suposed to do the steps from the first vid (making meshes for the right eye) on the left and then transfer it. when I copy and pasted my work on the right to the left reflecting it and everything the eye on the the left just basically had a second eye behind it. (I hope this makes sense)
hi :D the tutorial really helps me a lot ive been finding videos about live 2d steps for forever. However, i’m at the part about reflecting the eyes and i’m having a problem because my model has different eyes colour, do you have a way to keep the deformers but change the eyeball by any chance D:?
Hello I enjoy your tutorial but as the preset in 6:39 can we leave the physic model preset blank? A tutorial would be great to understand cuz as a visual learner it's confusing not knowing where to make one. It would help thank you!
I am so thankful for this video, you can'T imagine! so great explained and really beautiful blink! THANK YOU! I want to ask maybe someone knows, why my model at the end is suddenly not blinking till the end? It is blinking onliy till 0.2, so means it doesn't close completely.. I can do it manually, but when it auto run, it doesn'T work..
this tutorial was super helpful! one thing tho is that when i flipped the eye, the EyeOpenR/L glitched and and the iris disappears when wide open and half open. anything i can do to fix it?
29:43 This tutorial is Lovely! But as I was following it at this part I don't have the option to replicate parameters. Is this only a pro Live2D option?
27:37 I was so confused but it turns out when you copy paste like this now days it creates a deformer thing at the top you need to delete. Otherwise it does not move to the other eye when you refelct.
hii, i have a lil problem! after completing everything i realised in the left eye, one highlight doesnt move the same as the other in terms of looking x and y. im not sure how to fix this as ive tried to delete the new parameter and redo it (30:47 this step!) and it wont change the parameter?
Is there a way to copy the attributes over to the second eye? I have a character with two different eye styles - the left one is robotic whilst the right one is organic.
When I copy and paste my eye, it doesnt go to where my other eye is originally placed. It's reflects to the middle of the face and I'm not sure if Live2d will allow me to move it. Any advice?
question like for the pandelum part the pendelum keep going to ward the normal eye so i cant see it close, all i see is its trying to open its eyes for a quick second. can someone tell me y?
This was super helpful, thank you so much! I followed ur instructions on the third model i ever made and it looks so much more bouncy and i have a better feel for the physics now
The red dot in the physics? Have you set up the input effectiveness to 100? also make sure that your Mini Lash wiggle parameter is ranged from -1 to 1, if it's for example from -30 to 30, change the physics scale to 30 ^_^
@@YoshinoArt Thanks for the quick response, everything is set exactly like t hat, effectiveness 100, range is -1 to 1 and physics set to 1. Edit: I overlooked the fact that the output was set to the Lash Wiggle and not the Mini Lash Wiggle, i'm so sorry
You need to go on the parameters setting (click on the three dashes on top of the parameters, like this "=" but with 3 lines And click "settings for lip sync and eye blink" from there checkmark your eyes parameters ^_^
I have iphone tracking ; _ ; it's the best option existing for tracking right now basically, since the newest apple devices have the TrueDepth technology
For this to work in vtube studio, would you need to change the parameter ID ? I know my mouth wasnt moving since the parameter was not named according to L2Ds ID naming list.
Hi, For some reason, even though ive done parameters and everything correct, when i go into ''Physics/Scene Blending Settings'', copy everything you have, it doesn't show the Lash wiggle. It only shows the eye blinking. How do i fix it? I've already tried messing with settings but to no avail. :(
I have a question, Im working on a model that has a slightly different iris design then their right eye. Will i have to re-rig the left eye or does copying and pasting still work?
Hello Yoshino, I am currently rigging a Live2D model and your tutorials have been very helpful. I followed the video however, I think I did something wrong. In VTubeStudio, when I wink with my right eye my left eye winks instead and vice versa. What should I do?
How do you make the jiggly eye physics show up in Vtube Studio? I make them in Live2D and they work in model/physics tab in Live2D but when I open the model in Vtube studio there’s no jiggly physics. The eyes still open and close and everything but no jiggly 😢. Please help me!
Hello! I followed your tutorial since part #1, however I have a problem. When I went to start the Lights Wiggle, the mesh is active on the Eyes XY parameters and I don't know what to do. Same goes for the Iris. When I made a deformer, I was able to put the keyframes, but you said to work on the mesh. Did I do something wrong? ;3;
Hello, your tutorials are amazing but right now I’m having a little bit of difficulty when I clicked reflect it did not go to the other side of the face. It stayed on the other side it just turned could you tell me what I did wrong please anybody?
So I have followed all your tutorials and just imported my model into VtubeStudio. But for some reason, the Right eye (the copied eye) moves over to the left side of the head when I turn on the webcam tracking. It is supper strange, Please help me not be a cyclops, Yoshino-sempai!!
Thank you so much, I could make alive eyes with these tutorials. But I rigged eyes first, so Idk how to linking the riggle eyes with the face (that I didn't rig), heeh. Anyway, your videos so useful.
Hello! Can you help me on this? After copying and pasting the other eye, I had the rename everything from “R” to “L”. I continue on creating new parameters for the mouth and for the head angles. However for some reason, the physics windows glitches. I checked my texture atlas and my “new” eye does have an art mesh, so it’s not a complete image on my texture atlas. Do you have an idea to fix this? Thank you so much for this tutorial already!
Hello! Usually when you copy paste elements, they still share the same mesh in the texture file, but it should work anyways after you export it ^_^ this also makes the model lighter
@@YoshinoArt hello thank you so much! For your help. I see it. One last question that occurred to me. When doing the head angles. I made the mistake of not making a “Eye position L” after my eye warp. And now my eye position is apart of the angles for the head and for the eyeballs. Do you have any way of fixing it?
@@godessbyhearts I'd suggest first of all reset to default parameters, then select your eye and remove the movement from the head XY and redo it on the new paramenter :/ When you make those kind of mistakes it's better to restart it, instead of spending a lot of time trying to fix but you end up messing up even more
Hello Yoshino. love ur tutorials! one question tho. i dont have the option "Replicate parameters" on mine. is that normal? ive tried many ways but nothing worked
Yoshino, great tutorial so far with the two tutorials I'm in!! Quick question: I'm having troubles regarding the eye light bounce. You said that having a parameter active might affect the lights from moving around and it does. How can I disable them since they also move when the model blinks and smiles?
The presets are just old model settings i saved ^_^ you can copy manually numbers like you see me do in the video, then save the preset to use in future models!
So first of all, amazing tutorial, thank you so much! I tried to follow it as closely as I could, and I was happy with the result, but after importing everything to VTube Studio, the eye physics became weird - there is a short delay. The avatar blinks, but the physics start only after the eyes open again, so it looks strange. I wonder what may be the cause? Because it works perfectly in Live 2D.
@@YoshinoArt Thank you for the tip! Unfortunately, changing the fps didn't help, but I managed to solve it by a workaround - I have realized the delay appears only if the strength of the physics is set to more than 50%, but that meant the other physics were nearly non existent. So in Live2D, I doubled the scale of everything except the eye physics and voilà, it worked!
I really love your turorial and Im also almost done with my character but im stuck with "replicate parameter:" as i do not have that option.. im using live2d ver 4.0 please help :
I've got a weird issue with my eyes. All the physics and blinking perfectly fine in live2d, but when I export it to vtube studio, the normal eye (the one that I didn't copy, paste and flip) works weirdly. The eyelashes, all the physics and blinking on that eye work but the pupil doesn't move. It's so weird. I've tried alot of things to fix it but nothing works? Does anyone have a solution to this?
I am in love with this part of the tutorial right along with the recent one, the movements are kawaii-tastic and the details are absolutely incredible and you definitely deserve a lot of respect for that-Kyu🤩🤩🤩🤩🤩🤩😊😊😊😊😊😊😊👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻…However there is one question that I would like to ask you, at around 18:49 could you please remind me of what you clicked on there?
hi yoshino !! i am grateful for your tutorials. im sorry to ask but can you help me with this one issue? i added the 1.0 keyform to the "eyeR open" parameter so that my vtuber can have wide shocked eyes and set default to 0.8, but in the physics/modelling window, everytime my model blinks it opens its eyes really wide and doesnt blink normally (-1 to 0.8) Would you happen to know why? If not, that's okay! I am really thankful for your content. Have a good day!
Hello Yoshino! I followed your tutorial and the eyes are moving fantastically, now the only issue I currently have is that my model has odd colored eyes and when I try to drag-drop the other color and erase the copied one the new color does not show at all, can you explain in detail how to do this I'm kind of confused. Thanks so much for this life saving tutorial!
hello, teacher! Thank so mush! First of all, I am not good at English, so please understand that I borrow the power of a translator. How does scale affect in thin blend mode? I can't listen to Englishㅠㅠ
this tutorial was wonderful, thank you so much for sharing this information! one question though. when i have it show random animations (specifically random poses), the eyes (when open) always stay at 1.0 even though i have the default as 0.8 :((( is this just the case for animations and will it be fine when i export???
First, thank you so much for the tutorial - it's been super helpful! However, after I copied the eye to the other side, when I went to check the physics the other eye doesn't blink at all after I moved the parameters from right to left. Do you know what could be causing this?
Make sure to repeat all the settings for the other eye, so you will be able to use them separately ;) this means diving the L eye parameters from the R eye parameters and then dividing the physics too ♥
My model have different colors eyes does that mean I have to re do everything again with the eye. Or is there a way to just copy the old eye skill to the other eye
Hello! You can copy-paste the eye just as I do in the video, but then grab the old iris (the different color) and drag drop it in the deformer of the rigged copy pasted eye. (Basically switch it with the copy pasted iris, which has the wrong color) Now you only have to remake the mesh and rig the iris and pupil for the parallax effect. But the squish and everything else will be working without everything to remake them!
@@YoshinoArt thank you so much. I don't know how but I also copy the mesh and just flipped it as well!. Everything is working great. Thank you so much for the help
I have a question, when i open physics/blending settings, the model is really pixelated and low resolution. Is there any way to make it clear and detailed?😭😭😭
I had another time that someone presented me this problem and apparently it happens for GPU-less PCs :/ but if that is not your case, maybe try to change the fps or save the file with another name
Hi! I followed everything step by step, however the flipping part is going wrong :(( When I flip I am unable to move the elements (even with the red box there) + when i try to manually move them piece by piece it just slides back using the parameters, could you please help?
You cant move them piece by piece, you need to put everything in a new temporary deformer and use that to move everything Once youre done do modeling >deformer >delete and pass to child components
Hey, I've been following the tutorial but I have a question. If the character you're working with has odd colored eye's, how would you go about doing this, can you use the reflect option or do you need to use a different method of the eyes?
You can follow all completely, but after you flipped the eye, drag and drop the color2 iris in the deformer and delete the color1 you dont need anymore ^_^
![How I Made My VTuber Move! 🌸💚 [Part 2: Rigging the Eyes, Mouth, and Head]](/img/1.gif)
For those watching this video and not understanding why your other eye might not be blinking, remember to go back to Modeling drop down > Parameters > Blink and add your new eye variant (open and smile!). I was about ready to pull my hair out until I remembered LMAO. Hope this saves someone some stress.
THANK YOU SO MUCH OMGGG i couldnt figure out wtf was wrong ur a blessing 😭😭
Thank you for this comment!!!! I'm a complete nub and was completely lost when it didn't work >.
Thank you!!!
DUUUUUUDE LOL I was about to cry for real, Thank you! But now my eye is kindof blinking, but half way type of thing lol.
omg thank you so much
Finally somebody who's doing tutorials and are not purposely being vague on rigging advice. I'll give you a sub just because and it looks like you have some good content overall. Thank you for this.
Thank you so much!
Yeah I can see that many are jealous of their technique 😅
As soon as my PC is fixed I'll make more tutorials 💕
Thank you for going over Live2D in such detail. It's been really hard for me to learn and so many riggers are purposefully vague, seemingly to keep commission demand high LOL. I can't afford to pay for a model/rig so I've had to do everything myself, and your videos are amazing for learning! You've earned my sub. :)
omg... you make evertyhing easy...
I just did it
I give up with live2d... but now i feel inspired
You are seriously an angel 😭 your model is beautiful, your voice is calming, and your tutorials are probs the best I’ve seen so far :O tysm!!
And you are too sweet 😭 ❤️
nah this comment is straight facts frfr 😭😭
Thank you so much for your guides! I'm starting off with the free trial version right now, so I had to skip the physics as I am limited on my Deformers and parameters. BUT I was able to follow along with everything else and I'm so happy! Slowly will be going over your other videos to keep going! Thanks again!
THANK YOU SO SO MUCH! THE RESULTS ARE IMMACULATE1 This is one of the best tutorials you are very very patient and made sure to show all the footage not many people do that so thank you very much!
Thankyou!!! I tried to follow some other guides before coming to yours but would always get lost and found people moved to fast, you go at the perfect pace and make sure we dont miss where your clicking etc. Thanks to you i've just finished my first set of eyes and im in love
Thank you so much. ♥ After 3 nights I got my eyes completely rigged with your tutorials!
I am writing from Turkey, your videos are very helpful, it started without knowing anything and it is very easy thanks to you, you teach very well yoshino-senseii :3
my model is uneven so the copy-pasting of movements isn't exactly helpful, but this series is way more helpful than the other videos I've seen that only tackle basics! Much platonic love! 💜💛
You have been of great help as I make my own model! I'll be sure to bring you up anytime someone asks me how I learned to rig! Thank you so much!
Good job Snekie! Remember that after Christmas I'll be back at streaming at twitch.tv/yoshinoart so you can watch the live2d process!
These tutorials are life savers. THANK YOU! You're wonderful 💜
i can not express how thankful I am for your tutorials. you've made this program so easy to understand and showed how to do some really cool effects. ty so much
I'm so happy you've posted this one now 🤣 cause I just finished doing the eyes today ready for the physics
Uwa I had a good timing for one time 😂😂 GL on your work!
@@YoshinoArt yes you did hahah
32: Thank you for sharing the wiggle parameters. Great video!
Thank you so much! You’re helping me so much, it’s my first time rigging and you make it look already semi-professional
I LOVE YOUU, TYSM! I've been doing rigging for a long time, but I never went to the advanced part.. You helped me a lot!
This deserves so much more love, this tutorials are amazingggg. Thank you yoshinooo 🥰🥰
28:26, if you put the meshes inside a warp deformer and move said deformer, you can re position the meshes without having to mess with each keyframe.
Thanks for the tip!
Now that you say it... It sounds so obvious! 😖💖
@@YoshinoArt np :3
This tip saved my butt, thank you!
Thank you for such a detailed explanation and useful advice! If I may ask, your art’s edges are looking really realllly smooth, I was wondering how big do you setup your canvas? Thank you again!
Hewo! I usually use 4000x8000 canvas
But in general I advice you never go below 2000 px because that is more or less the screen size!
Finally a tutorial where the explanations make sense to me!!
Most vtuber artists who make these are good at Live2D but not the best at teaching and explaining
Your explanations make so much more sense thank you (T^T)
working on these with me and my friend
Can we have a head turn/had angles tutorial? One that shows how to make everything move with the head?
thank you so much, it was very easy to follow along and now my eyes are all nice and bouncy :) also made the ears go slightly down when the eyes are close
ur videos are honestly amazing and ive been binging them all, but i do have one question, when i copy and paste the eye and reflect it, it doesnt go right on the other eye, its like to the side, and when i try to fix it, it messes things up. how would i be able to fix this
Thank you so much for your tutorials! They're really detailed without being information overlaod! Your instructions are really easy to follow as well~
You're welcome!
These are so in depth, helpful, and gorgeous! Thank you for sharing!
You're welcome!
I like ur glasses, I dont think I will ever become a vtuber but its interesting to watch :))
Stay safe
You make it look so easy when just the most little tiny thing can make everything go wrong lol
It’s the best tutorial I’ve ever seen, thank you so much!!!!!!!! You explain like a god
You're welcome! Head XY in the making ❤️
Thanks so much! I have followed the first part of your tutorial and I'm so happy finally someone covered this topic and showed us how to do this. Your tutorials are very easy to follow and understand, I've subscribed to your channel, cause I love your content as well. May I ask would you do more tutorials in the future? :o
Heyo
@@YoshinoArt Yeah I really did! I'm looking forward following your other tutorials for my upcoming model :) I'll give credit of course ^^
thank you so much !! my models are eyes are so shiny and animated
Good day Yoshine, I want to thank you so much for this video. I helped me start rigging my own model
Okay, so, I know I'm late here, but I hope you can help. No matter what I do, the eye shines won't wiggle in the physics preview! I even used your exact numbers.
I'm saving this playlist for when I can start making a model
Thanks for your support!!
Thank you!
thank you for your amazing videos, they've helped me so much!!!
though sometimes live2d makes me sad, a lot of my reflects havent worked during the rigging process and now the eye copy paste and flip didnt work, so I am having to try and do everything all over again for the other one ;-;
Hi, I have a small problem. The right eye is duplicated from the left eye and it works perfectly in the physics but in the cubism viewer the right eye doesn't blink and i dont know the cause of it or what went wrong. :( I also checked off the eye blinking settings for it and seperated all of the parameters.
100% life saver! Thank you so much!
Thank you for making these awesome videos! your tutorials help me so much!
You're welcome ♥
I have no idea what I did wrong when it came to the fliping but it didn't work I followed the steps correctly, are you suposed to do the steps from the first vid (making meshes for the right eye) on the left and then transfer it. when I copy and pasted my work on the right to the left reflecting it and everything the eye on the the left just basically had a second eye behind it. (I hope this makes sense)
hi :D the tutorial really helps me a lot ive been finding videos about live 2d steps for forever. However, i’m at the part about reflecting the eyes and i’m having a problem because my model has different eyes colour, do you have a way to keep the deformers but change the eyeball by any chance D:?
yea sure! just drag drop the 2nd iris inside of your reflected eye and delete the 1st copy pasted one
Hello I enjoy your tutorial but as the preset in 6:39 can we leave the physic model preset blank? A tutorial would be great to understand cuz as a visual learner it's confusing not knowing where to make one. It would help thank you!
Quick question. Would it make a huge difference if I do not have any Physics model presets like you do?
I am so thankful for this video, you can'T imagine! so great explained and really beautiful blink! THANK YOU!
I want to ask maybe someone knows, why my model at the end is suddenly not blinking till the end? It is blinking onliy till 0.2, so means it doesn't close completely.. I can do it manually, but when it auto run, it doesn'T work..
26:52 this is what i'm looking for
this tutorial was super helpful! one thing tho is that when i flipped the eye, the EyeOpenR/L glitched and and the iris disappears when wide open and half open. anything i can do to fix it?
29:43
This tutorial is Lovely! But as I was following it at this part I don't have the option to replicate parameters. Is this only a pro Live2D option?
Is your Live2d updated? Older versions didnt have that feature
@@YoshinoArt
Ahh! I just checked and it isn't updated. Tysm for replying so fast! This tutorial was very useful!
27:37 I was so confused but it turns out when you copy paste like this now days it creates a deformer thing at the top you need to delete. Otherwise it does not move to the other eye when you refelct.
hii, i have a lil problem! after completing everything i realised in the left eye, one highlight doesnt move the same as the other in terms of looking x and y. im not sure how to fix this as ive tried to delete the new parameter and redo it (30:47 this step!) and it wont change the parameter?
Hi! How do I add presets into physics like you? I'm currently working with the default ones, and they aren't enough. :')
Is there a way to copy the attributes over to the second eye? I have a character with two different eye styles - the left one is robotic whilst the right one is organic.
When I copy and paste my eye, it doesnt go to where my other eye is originally placed. It's reflects to the middle of the face and I'm not sure if Live2d will allow me to move it. Any advice?
Just create a temporary Deformer, place it where it should go and then go at modeling > deformer > delete deformer and pass to child component
question like for the pandelum part the pendelum keep going to ward the normal eye so i cant see it close, all i see is its trying to open its eyes for a quick second. can someone tell me y?
This was super helpful, thank you so much! I followed ur instructions on the third model i ever made and it looks so much more bouncy and i have a better feel for the physics now
The red dot in the physics? Have you set up the input effectiveness to 100?
also make sure that your Mini Lash wiggle parameter is ranged from -1 to 1, if it's for example from -30 to 30, change the physics scale to 30 ^_^
@@YoshinoArt Thanks for the quick response, everything is set exactly like t hat, effectiveness 100, range is -1 to 1 and physics set to 1. Edit: I overlooked the fact that the output was set to the Lash Wiggle and not the Mini Lash Wiggle, i'm so sorry
My model dosent do automatic blinking in the psychics editor what do I do ?
You need to go on the parameters setting (click on the three dashes on top of the parameters, like this "=" but with 3 lines
And click "settings for lip sync and eye blink" from there checkmark your eyes parameters ^_^
I have an issue.. When I go into the Model Physic section the Eye doesn't blink itself.. How do I fix this?
I love your tutorials! They help so much!
I have iphone tracking ; _ ; it's the best option existing for tracking right now basically, since the newest apple devices have the TrueDepth technology
For this to work in vtube studio, would you need to change the parameter ID ? I know my mouth wasnt moving since the parameter was not named according to L2Ds ID naming list.
Make sure that your left Eye open ID isnt EyeROpen2
It must be EyeLOpen
Same for smile! 🫶
Hi,
For some reason, even though ive done parameters and everything correct, when i go into ''Physics/Scene Blending Settings'', copy everything you have, it doesn't show the Lash wiggle. It only shows the eye blinking. How do i fix it? I've already tried messing with settings but to no avail. :(
Did you change to the left corresponding parameters both input and output?
@@YoshinoArt Oh my goodness i messed up the input, thank you so much for the quick response !!
Omg sooo many helpful things!! Thank you so much!
You're welcome! Next week imma post eyebrows too!
I have a question, Im working on a model that has a slightly different iris design then their right eye. Will i have to re-rig the left eye or does copying and pasting still work?
Hello Yoshino, I am currently rigging a Live2D model and your tutorials have been very helpful. I followed the video however, I think I did something wrong. In VTubeStudio, when I wink with my right eye my left eye winks instead and vice versa. What should I do?
Go in VTS parameters, find EyeROpen and click on the input and change it to EyeL, then do the same for the other eye ^_^
@@YoshinoArt THANK YOU😭🙏I did what you said and now its completely normal now. Thank you!
How do you make the jiggly eye physics show up in Vtube Studio? I make them in Live2D and they work in model/physics tab in Live2D but when I open the model in Vtube studio there’s no jiggly physics. The eyes still open and close and everything but no jiggly 😢. Please help me!
Hello! I followed your tutorial since part #1, however I have a problem.
When I went to start the Lights Wiggle, the mesh is active on the Eyes XY parameters and I don't know what to do.
Same goes for the Iris. When I made a deformer, I was able to put the keyframes, but you said to work on the mesh. Did I do something wrong? ;3;
For the lights wiggle you have to create a deformer called Lights wiggle ^_^ that way It won't interfere with the mesh and the eyeball xy
@@YoshinoArt tysm !!! 🥺
your video is really helping me!! thankyou sooo much !!!
You're welcome ♥ Thanks to you for supporting my content!
Hello, your tutorials are amazing but right now I’m having a little bit of difficulty when I clicked reflect it did not go to the other side of the face. It stayed on the other side it just turned could you tell me what I did wrong please anybody?
So I have followed all your tutorials and just imported my model into VtubeStudio. But for some reason, the Right eye (the copied eye) moves over to the left side of the head when I turn on the webcam tracking. It is supper strange, Please help me not be a cyclops, Yoshino-sempai!!
I'm guessing this won't work in the free version because of limited parameters?
Thank you so much, I could make alive eyes with these tutorials. But I rigged eyes first, so Idk how to linking the riggle eyes with the face (that I didn't rig), heeh. Anyway, your videos so useful.
What if My model has heterochromia? How do i make or copy the same parameters for the other eye?
Just follow the tutorial but then drag and drop the different iris where the copy-pasted one is ^_^
Hello! Can you help me on this? After copying and pasting the other eye, I had the rename everything from “R” to “L”. I continue on creating new parameters for the mouth and for the head angles. However for some reason, the physics windows glitches. I checked my texture atlas and my “new” eye does have an art mesh, so it’s not a complete image on my texture atlas. Do you have an idea to fix this? Thank you so much for this tutorial already!
*doesn’t have an art mesh*
Hello! Usually when you copy paste elements, they still share the same mesh in the texture file, but it should work anyways after you export it ^_^ this also makes the model lighter
@@YoshinoArt hello thank you so much! For your help. I see it. One last question that occurred to me. When doing the head angles. I made the mistake of not making a “Eye position L” after my eye warp. And now my eye position is apart of the angles for the head and for the eyeballs. Do you have any way of fixing it?
@@godessbyhearts I'd suggest first of all reset to default parameters, then select your eye and remove the movement from the head XY and redo it on the new paramenter :/
When you make those kind of mistakes it's better to restart it, instead of spending a lot of time trying to fix but you end up messing up even more
@@YoshinoArt Okay! Will do. Thank you again for the help!
Hello Yoshino. love ur tutorials!
one question tho. i dont have the option "Replicate parameters" on mine. is that normal? ive tried many ways but nothing worked
i have the same problem :(
hello yoshino when i reflected, my eyes are moving towards each other in eyeball xy
Yoshino, great tutorial so far with the two tutorials I'm in!! Quick question: I'm having troubles regarding the eye light bounce. You said that having a parameter active might affect the lights from moving around and it does. How can I disable them since they also move when the model blinks and smiles?
Just make different deformers for different parameters ^_^ this way the movements don't conflict
@@YoshinoArt Thank you so much, that actually worked!
I have a question. Why my reflection is not symmetrical? When I reflected my left eye it appeared like a few santimeters left from main right eye.
Idk
I dont have the eyelashes preset So I dont know what to do now... Is there anything I can do for it to show up?
The presets are just old model settings i saved ^_^ you can copy manually numbers like you see me do in the video, then save the preset to use in future models!
Спасибо
So first of all, amazing tutorial, thank you so much! I tried to follow it as closely as I could, and I was happy with the result, but after importing everything to VTube Studio, the eye physics became weird - there is a short delay. The avatar blinks, but the physics start only after the eyes open again, so it looks strange. I wonder what may be the cause? Because it works perfectly in Live 2D.
Sometimes the physics do change when imported in VTS :( try to change VTS physics to 30 fps
@@YoshinoArt Thank you for the tip! Unfortunately, changing the fps didn't help, but I managed to solve it by a workaround - I have realized the delay appears only if the strength of the physics is set to more than 50%, but that meant the other physics were nearly non existent. So in Live2D, I doubled the scale of everything except the eye physics and voilà, it worked!
Thanks for the video. Now I actually understand that I can't do it XD
I really love your turorial and Im also almost done with my character but im stuck with "replicate parameter:" as i do not have that option.. im using live2d ver 4.0 please help :
Updating to the most recent version should.make it work
I've got a weird issue with my eyes. All the physics and blinking perfectly fine in live2d, but when I export it to vtube studio, the normal eye (the one that I didn't copy, paste and flip) works weirdly. The eyelashes, all the physics and blinking on that eye work but the pupil doesn't move. It's so weird. I've tried alot of things to fix it but nothing works? Does anyone have a solution to this?
nice tutorial and your model but honestly hard it is especially when I try to make my model :) (Greetings from Poland) (Pozdro z Polski)
you are the messiah
Hey thank u for this 😭😭❤️
You're welcome ❗🤗
Thanks
I am in love with this part of the tutorial right along with the recent one, the movements are kawaii-tastic and the details are absolutely incredible and you definitely deserve a lot of respect for that-Kyu🤩🤩🤩🤩🤩🤩😊😊😊😊😊😊😊👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻…However there is one question that I would like to ask you, at around 18:49 could you please remind me of what you clicked on there?
I just finished the eyes and the results are beautiful thanks to you (◍•ᴗ•◍)❤
hi yoshino !! i am grateful for your tutorials.
im sorry to ask but can you help me with this one issue? i added the 1.0 keyform to the "eyeR open" parameter so that my vtuber can have wide shocked eyes and set default to 0.8, but in the physics/modelling window, everytime my model blinks it opens its eyes really wide and doesnt blink normally (-1 to 0.8)
Would you happen to know why? If not, that's okay! I am really thankful for your content. Have a good day!
Hello! This was a bug in older versions, updating Live 2d should work ^_^
@@YoshinoArt thank you so much queen!! have a marvelous day
my eye isnt flipping to the other side and is only flipping on top of the eye i already rigged, what do i do?
How can i tweaking the phisics model present?
Hello Yoshino! I followed your tutorial and the eyes are moving fantastically, now the only issue I currently have is that my model has odd colored eyes and when I try to drag-drop the other color and erase the copied one the new color does not show at all, can you explain in detail how to do this I'm kind of confused. Thanks so much for this life saving tutorial!
Make sure your eye didn't drop into a hidden folder!
hello, teacher! Thank so mush!
First of all, I am not good at English, so please understand that I borrow the power of a translator.
How does scale affect in thin blend mode?
I can't listen to Englishㅠㅠ
You talk about "Iris Scale" ?
I give the eye a wiggle movement when opening and closing the eye
this tutorial was wonderful, thank you so much for sharing this information! one question though. when i have it show random animations (specifically random poses), the eyes (when open) always stay at 1.0 even though i have the default as 0.8 :((( is this just the case for animations and will it be fine when i export???
It will be fine! Its just a bug ^_^ if you update to version 4.2 you shouldnt even have the problem anymore
@@YoshinoArt thank you so much!!!
First, thank you so much for the tutorial - it's been super helpful! However, after I copied the eye to the other side, when I went to check the physics the other eye doesn't blink at all after I moved the parameters from right to left. Do you know what could be causing this?
Wehhh I figured it out! I hadn't check boxed the other eye open parameter to be included in the settings for eye-blinking and lip-sync.
Make sure to repeat all the settings for the other eye, so you will be able to use them separately ;) this means diving the L eye parameters from the R eye parameters and then dividing the physics too ♥
Love your tutorial. How can I adjust the blinking speed of my eye btw?
That can't be done ^_^ but it's not really a problem since when exported the model will simply follow your eye movement
My model have different colors eyes does that mean I have to re do everything again with the eye. Or is there a way to just copy the old eye skill to the other eye
Hello! You can copy-paste the eye just as I do in the video, but then grab the old iris (the different color) and drag drop it in the deformer of the rigged copy pasted eye. (Basically switch it with the copy pasted iris, which has the wrong color)
Now you only have to remake the mesh and rig the iris and pupil for the parallax effect.
But the squish and everything else will be working without everything to remake them!
@@YoshinoArt thank you so much. I don't know how but I also copy the mesh and just flipped it as well!. Everything is working great. Thank you so much for the help
I have a question, when i open physics/blending settings, the model is really pixelated and low resolution. Is there any way to make it clear and detailed?😭😭😭
I had another time that someone presented me this problem and apparently it happens for GPU-less PCs :/ but if that is not your case, maybe try to change the fps or save the file with another name
@@YoshinoArt alright! thank you so much!!
Hi! I followed everything step by step, however the flipping part is going wrong :((
When I flip I am unable to move the elements (even with the red box there) + when i try to manually move them piece by piece it just slides back using the parameters, could you please help?
You cant move them piece by piece, you need to put everything in a new temporary deformer and use that to move everything
Once youre done do modeling >deformer >delete and pass to child components
@@YoshinoArt ooh alright! thank you so much!
Hey, I've been following the tutorial but I have a question. If the character you're working with has odd colored eye's, how would you go about doing this, can you use the reflect option or do you need to use a different method of the eyes?
You can follow all completely, but after you flipped the eye, drag and drop the color2 iris in the deformer and delete the color1 you dont need anymore ^_^
@@YoshinoArt Thank you very much!