I bought a new Gen3/6spd for my project. I was thinking the 2yr warranty was a benefit, but from what I hear... it’s only if it’s installed by a Ford Tech.
I just budget build my 68 f100 short bed for under 20k. 2000 bucks for an f150 coyote, conteol pack, 400 bucks for a tr3650 with clutch and flywheel, champ radiator, crown Vic front end, explorer 31 spline traclock rear ended, and a $600 4 link from Ridetech with Coilovers all around. I pulled it all apart, powdercoated from the frame up. I’m building a 68 Mustang fastback which will be all new stuff. I will tow the mustang with the truck 👍
A gen 2 with low miles is only around $5K though. Although it’s not quite as good as a gen 3 it’s still arguably the best bang for your buck if you’re on a budget.
i got a f150 gen 1 from facebook for 1000$, swapped a few parts out to make it comparable with the mustang coyote and had it in the car for half the price of just your motor lol
I never buy used... but... the one time I did thought I was getting a good thing turned out to be extremely frustrating. Bought an engine and transmission only to find out the package was not even close to the mileage the guy told me. Did every bit of homework I could think of and that whole mess has cost me about 8000.00 and my project delayed by years because now I dont have the money to get what I need. I know several ppl that have great luck, but I didnt. So from now on, only new for me.
Imagine if you can take 2 clapped out Coyotes, do some cutting and welding on both the blocks and heads as well as porting and polishing the modified factory heads and you have you're self a 6.2L Coyote V10.
I paid $3500 for gen 1 with 44k on it, and that included a the 4x4 6R80. it's not running yet ;) so I can't comment on if it was a mistake, but it seemed more logical for a used motor for me.. building it in my garage for myself - not a show truck. time will tell. also, If I had a $80k roadster frame (as shown in the video) it really wouldn't make sense to skimp on the used motor.
…ALL KIDDING ASIDE, if I had the money to do this conversion from FatFender just the way you Guys do em up and money left for nothing else, I’d do it in a flat second. Y’all make em look as if Ford was making these old F100s themselves today. Probably better actually.
Yawn on the 5.0 coyote bore is 3.63 by 3.63 stroke Really and a big 600 hp I'll stick with my 351 Windsor pushed out to 427 with a DoaE block with a Supercharger from a lighting as well in a Nice Cam from comp cams and all down in a 95 GT Wise people that have that Coyote don't want No part of it and Dynos out at 875 hp and want more 351 windsors is the Only way to go And a Hole lot less plastic Coyote motors is Fords joke Totally in a 3900 pound Mustang Lmao
I bought a new Gen3/6spd for my project. I was thinking the 2yr warranty was a benefit, but from what I hear... it’s only if it’s installed by a Ford Tech.
I just budget build my 68 f100 short bed for under 20k. 2000 bucks for an f150 coyote, conteol pack, 400 bucks for a tr3650 with clutch and flywheel, champ radiator, crown Vic front end, explorer 31 spline traclock rear ended, and a $600 4 link from Ridetech with Coilovers all around. I pulled it all apart, powdercoated from the frame up.
I’m building a 68 Mustang fastback which will be all new stuff. I will tow the mustang with the truck 👍
A gen 2 with low miles is only around $5K though. Although it’s not quite as good as a gen 3 it’s still arguably the best bang for your buck if you’re on a budget.
Ill take a gen 1 if it save me cash
Sounds good to me. I'll take two.
Amen. Go new. Used = Someone else’s problems!!
If I had the money I would definitely put the 5.0L Coyote V8 in my 1996 Ford F150.
You got all teary eyed thinking about a wrecked Mustang with a Gen 3. It’s okay Bruh. Happens to me too
Makes sense, since you know the used 1 has 90% probability rate of being beat on. 👍
New Gen 2 crate package worked perfect for my 53 and it was priced just right at $12,500 with a warranty!
Transmission included?
i got a f150 gen 1 from facebook for 1000$, swapped a few parts out to make it comparable with the mustang coyote and had it in the car for half the price of just your motor lol
I never buy used... but... the one time I did thought I was getting a good thing turned out to be extremely frustrating. Bought an engine and transmission only to find out the package was not even close to the mileage the guy told me. Did every bit of homework I could think of and that whole mess has cost me about 8000.00 and my project delayed by years because now I dont have the money to get what I need. I know several ppl that have great luck, but I didnt. So from now on, only new for me.
I agree New Motors all the way nothing used going in my truck
Imagine if you can take 2 clapped out Coyotes, do some cutting and welding on both the blocks and heads as well as porting and polishing the modified factory heads and you have you're self a 6.2L Coyote V10.
Smart decision.👍
Now if only if they had a 7.3 crate kit. I been leaning towards newer powertrain into my 90 bronco
Hey I gotta 90 bronco too and I’m thinking about swapping it… you got any suggestions or tips or anything you could give me?
I paid $3500 for gen 1 with 44k on it, and that included a the 4x4 6R80. it's not running yet ;) so I can't comment on if it was a mistake, but it seemed more logical for a used motor for me.. building it in my garage for myself - not a show truck. time will tell. also, If I had a $80k roadster frame (as shown in the video) it really wouldn't make sense to skimp on the used motor.
Would love one in my '95!
Thanks
For a couple grand extra seems like the way to go
Coyote vs Godzilla
Which one would you suggest?
My friend Mike's 07 V6 Mustang could you a 5.0L Coyote V8 to replace his 4.0L V6.
Do you have a Coyote engine for sale?
I'm tryna throw one of these in my 95 tbird
Hell with a control pack ID get a holley ecu
And you can make mtr and transmission and everything work?
What chassis is that in the video or what is it for?
…ALL KIDDING ASIDE, if I had the money to do this conversion from FatFender just the way you Guys do em up and money left for nothing else, I’d do it in a flat second. Y’all make em look as if Ford was making these old F100s themselves today. Probably better actually.
Is that 18k for motor and transmission
Motor, trans and control pack
Can you mate a 10speed to the voodoo 5.2
First
Y'all don't care cause it sound like y'all just drop engine them go
Yawn on the 5.0 coyote bore is 3.63 by 3.63 stroke Really and a big 600 hp I'll stick with my 351 Windsor pushed out to 427 with a DoaE block with a Supercharger from a lighting as well in a Nice Cam from comp cams and all down in a 95 GT Wise people that have that Coyote don't want No part of it and Dynos out at 875 hp and want more 351 windsors is the Only way to go And a Hole lot less plastic Coyote motors is Fords joke Totally in a 3900 pound Mustang Lmao
I think people want them for different reasons. I think we can agree on that.
LMFAO who cares if its new or used when you building the motor soo lilies wouldn't matter folks selling cars rite with over 200 thousand miles
None... Buy a L.S. engine...