6010 Root Pass | 3g Plate | SMAW
HTML-код
- Опубликовано: 28 мар 2021
- Rosendo is about to show you how to put in a root pass on a 1/2" plate in the 3g position using the SMAW welding process.
We also just launched our online store. Check it out at www.weldlife.com/ use discount code flyduck16 for 10% off total purchase.
Get yourself a custom trimmed pipeliner with aluminum fasteners and the super light weight front-flip adaptor from WeldTube.
WeldTube Online Store: www.weldlife.com/
#WeldTube #southcoastweldingacademy #Welding
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en Хобби
👇WeldTube Store👇
www.weldlife.com
2:26 You meant don't pull out a lot, only a few militer before touching the puddle, am I right?
Man this is amazing , I've been fighting this for days trying to get it right. I watched this 10 minutes later laying beads. Thank you . Great video
Thanks for this, I've been battling with the same setup on 3/8" plate in class, for the past few days. Good info that I'll try out when I go back tomorrow!
Well did you pass🤔
@@terrybrewer1622 I did! 3G and 4G
I had months
I’m on 3g right now. I need this like a pig needs slop
Keep at it bro . 3g roots were like kryptonite to me when i was in school.
Keep trying, don’t be bummed out if it isn’t going to well, remember every fail and learn from your mistakes and try again.
@@jeffgreer198613 Same here. Took months for me to figure it out, but once I had it, the test test where way more simple.
SAME
Same..I’m in the booth watching this rn
Just started open root in class. Thank you for showing the set up and the prep process. Much help
The bead on the backside says it all. Probably the easiest method to learn open root with and consistent too 😊
I've been having trouble with this in my welding class and I think this video gave me a better understanding.
Repetition.
Settings.
Gap.
Comfort.
They make it look easy.
Continue trying the harder positions to get better at the others.
Angle your plate to forty-five an lean away or towards you to simulate 6g.
This will make the regular four positions easier in relatively.
Another one for the books guys. Awesome video. Practical application.
Got a weld test Tuesday next week for a boiler company this video came in handy
Thank you i mised some days due to an inury and was goven this as a test and u helped save me
Nice video, I got a 6010 3g on a 3/8 plate today and a bend test for midterms too. I can’t wait to get it done.
Same I have mine today😅
Great demo !
Really great video. The film quality is amazing and the info is straight to the point. Thank you a lot for the uploads. I'm in Houston as well going to weld school and this channel has helped me alot.
Thanks for that side view. It really helps.
Very clear and nice technique 🙏👏👏
Definitely took some getting used to running 6010 roots, after spending years rooting with 7016 lowHy rods.
Beautiful work ❤
Don't pull out, got it ✅️
Thanks Rosendo 💪🏻
Awesome job brother! 😎👏🏻
Muy educativo sus videos saludos cordiales desde panamá City 🇵🇦
Great job man👍🏻👍🏻👍🏻
Hello,
Excellent, thank you so much for your terrific technique, have a good one
Love your videos man. So much stuff you say I think I understand then later on I really get it and I'm like Dawm.
Niiiiiccccceeeeeeee, well explained short n simple. Keep burnin rods mate, yewwwwwwwww
www.weldlife.com
WeldTube Online Store
Use discount code flyduck16 for 10% off
could we get one with a smaller plate?
Spanish!!
Can shipments be made to Spain?
I would like to buy a pipeline mask
@@diegoolivos5656 has podido comprar estas caretas para tubería, desde aquí en España es bastante difícil..
I use a nickel for my landing and a quarter for my gap and it seems to work good
That is really nice.
Excelente, saludos desde Chiapas México
Great stuff
Great video
Completa todo el.procedimiento,el pase de raiz te salio perfecto 💪😎
holy shit man this is perfect, thank you!
Thanks you good working ❤❤❤
Ordered the shirt and a couple stickers! Can't wait
The new helmet looks bad ass, imma but one and cut it myself for cheap 😂
Excelente video y trabajo estoy soldando cañería y me ayuda mucho ,gracias
Its due on the 15th and its the 13th, this is gonna be fun and not stressful
Great welds.
That is beautiful
BRAVO !!!!!!!!!!!!!!!!!!!!!1
Awesome bro
Nice work. More videos
Nice 👍
Thanks you via very good 👍👍
Thanks for the video! I definitely needed this. I’ve been blowing holes in my plates in class haha. I’ll try this next time and see if i can control the heat more by not pulling out as much. I have to take my test soon.
You in school Peyden?
@@downhilldaddy9346 yup. Been in trade school for a few months now
@@Peyden what kind of welding you looking to get into?
@@downhilldaddy9346 Well I have my mig and flux certifications, but I’m working on stick now and I’ll do tig next. As far as a career goes I’m hoping I can make it on a pipeline or do some other structural work. Might try to join the local union.
@@Peyden TIG is the future. Good luck and I hope to see you in a plant sometime 🤙🏾
Love the tips from your videos. It's great to hear and see other people weld everybody weld differently. Side note, who makes the stinger you are using? Thanks again!
very good
Still helping out fools like me. Thanks Rosendo.
With 6010 we never scare about tight gap anymore
Nice
Buitiful brother
Thanks sir
I will also become a Great Welder someday,. For now, I will train hard first. Don't stop until you get to the top.
Very well
Worked on my first try. I did it at 85 Amps and worked like a charm.
85 for the root? In class they told me to do it 65-75?
I’m in spot practicing where 80 amps is a bit too hot, and 75 seems too cold my keyhole keeps closing and snuffing the arc. Drives me nuts
I’m in spot practicing where 80 amps is a bit too hot, and 75 seems too cold my keyhole keeps closing and snuffing the arc. Drives me nuts
I’m in spot practicing where 80 amps is a bit too hot, and 75 seems too cold my keyhole keeps closing and snuffing the arc. Drives me nuts
What kind of disc is used to clean de root pass? Any amazon links to buy them?
I really love your videos i really learned a lot. Im from Mexico i have a question. Is there a way to go to united states to take some courses or work there.?
My work gave me an esab 180i but I don’t weld. Is that a good beginner welder?
Does the same technique apply when doing it in the overhead position??
Assalamulaikum..
Guy's I'm always watching from pangasinan, Philippines
We using E6011... Me make crazy..
By the way I'm just a student beginner
He'll yeah rosendo get that shit!
Cuanto amperaje usaste en el pase de raíz vertical?????
The 3g or has gotten me depressed af Thankyou so much
Boa noite seus vídeos muito bom
For the root must electrodes thinner?
How much mm did grind down from the corners?
“Do NOT pull out”. “You gotta make sure you touch your puddle”. Words to live by.
First, I was just about to comment so when are the weld tube welding gloves and products coming?? Commented too soon 🤣🤣🤣💪
Unfortunately no gloves yet it seems
Quiero comprar esa mascara para España donde la puedo encontrar por favor diganme!! Gracias un saludo
Can this technique be used on pipe?
I started 3g Friday and I showed me instructor and he looked me in the eye and asked me “what the fuck is that”
When stitching only touch the puddle after it solidifies so go up and wait till the puddle cools down then touch it again and repeat that method, thats how i learned
how about a "monster" coupon , 6010 root?. Please.
جيد عمل رائع
Nice weld.... Can I borrow your welding mask.. 😁
Super Azerbaycandan severek izledim
I’m looking for a video on 6010 root pass on a rollout. Any help guys?
Saludos
Maybe next video show us tig on pipe but free hand every thing
Less gap between plates
Очень красиво
You made that look waaaayyy too easy bro
I pull out 😄
Just for you brother🇮🇩
I see that your rod angle is almost perpendicular; I see, in other videos, welders using slight upward (20˙?) rod angle... Does that make a difference? Thanks!
My boss does almost a 80° angle and his come out amazing everytime I think it’s more preference than anything
Tienes k poner una plaquita para entrar y otra para salir saludos bro
Deberían hacer del mismo video dos versiones en inglés y en español latino
I think my v groove is too narrow, not getting enough penetration because i can’t push my stick in enough
I have no problem running it but I can’t get one side to tie in and it’s annoying
How can i git the mask
Just went to your store, wildlife.com, and it says its under construction, opening soon. What's up with that?
Online store just went live👍
I always see the wide gaps low heat. Alot harder then people think. But a tighter gap requires more heat snd you gotta move faster so end of the day. Its preference.
Hola buen video , saludos desde Colombia 🇨🇴, por favor crar un vídeo en español o por lo menos los subtítulos en español, gracias 👍🏻
Cómo puedo conseguir esa careta
Dude if ok for you i want to aply to your shop
Hi bro I'm Indian 15 years ago welder
I've always known this technique as "whipping" great video!
Seems like it, but when you're going horizontal, I don't think you touch your puddle
Or "jacking"
I asked around yesterday: it's basically the upwards whip and pause technique. I believe the teacher in this video repeats "touch your puddle" not because you actually do it, but to stick in your mind that your arc length should stay minimal
@@Solaniin basically it's suppose to be the same diameter as the rod your using.
Do you mess with arc force/dig at all or no? I find running anything lower then 75 has me sticking like crazy. I understand all machines are different but I’m just curious
I run my roots at 60-65. You have to make sure you long arc it before you get going though or else you’ll just glob up and stick. Anything higher than 65 for me and my keyhole just gets out of control
Are you using a transformer based machine or an inverter?
@@kf8575 inverter, Miller dynasty
@2:27. I think I would want to pullout 👶🏻👶🏼👶🏽👶🏾👶🏿😹😹😹
What polarity is used when welding plate up hill 6010
Thanks guys for the best video on welding
Reverse
DC + is reverse polarity and Welding pipe is Down hill is DC- straight polarity
Which mean welding 6010 plate root pass is DC+ right?
Thanks for reply to my questions
DC+ is reverse polarity.
Welding pipe with a downhill progression using SMAW/Stick process will be DC+/reverse polarity. Typically you will use DC-/straight polarity with FCAW/flux core or with GTAW/Tig processes