You guys are the bomb. Great product and great instruction video. The car looks amazing now. (Of course, it looked pretty good beforehand, too.) As a noobie, I thought 1-2 hours top. 7 hours later... Problems included: Thought I had to remove fog lights to remove bumper, LED lights didn't work, Halo lights didn't work, brights didn't work, not knowing how to unplug plugs/bulbs, putting side bulb back in was a bear, etc. etc. But it looks great!!! Well worth it!
EXCELLENT VIDEO. PROFESSIONAL ! I had a loose clip, passenger side, holding the upper light on a 2001 GT. I DID NOT need to remove the bumper. Just loosen and lower about 2 inches, then loosen 3rd bolt.
@malikahsan1990 Sorry, we did not get a chance to show it, but the gray driving light socket and turn signal sockets are from your original headlights. Thank you
No you would have to use the bulb size on the headlights you would like the HIDs to go in. so if you want to use HIDs for your stock headlights then get that size but if you want it for the headlights in the video those would be a different size.
@santoyo801 Make sure you get the correct light bulb application for the headlights. The application should be same as the projectors. Sorry, we do not sell HIDs, so we do not have a video out for installation. However, the way the HIDs are made now are pretty much plug and play.
@ToonFanCarl Not too sure about that, generally its possible to do it without having to remove the entire bumper and light, but its harder to do so. if you can reach your hands behind the housing then it would be possible.
@angelv89 be sure to check on your wirings and how you connected them. not quite understanding how it keeps blowing your fuse, which it shouldnt unless you really did something wrong
@santoyo801 If you have the same brand which is TM headlights, then you should be able to change any of the light bulbs, there will be no problems, however, if they are sealed, please check with your seller for more info. Thank you.
@angelv89 did you also go through with how to wire your halos? both halo's and LED's act as your parking lights or they can also act as your DRL's. they dont have any association with your low beams unless you made some changes and wired them to do so.
@robbiebomber1 Additional Wiring is Required for Halo's and LED, and those are to be wired along with your parking lights, you COULD however wire them to your low beams. did you purchase this product from us? maybe our customer service reps can help you with your issue.
Thank you for the comments, however, the car was a customers car that was used to have the item installed. That was the only way that we could get so many different models of cars. Sorry, we do not know what type of rims they are.
Hi have had these lights for nearly 2 years no problems, used this video to intall Thanks. But how do you adjust the beams, my mechanic and I can't see any adjusters, any help would be appreciated.
Hey it is 2018 and i know this video was made in 2010. Do the newer models of these come with 5500k or 6000k led chips and the halos? I really dont want to buy these if they have that blue tinted leds and halos.
@malikahsan1990 The 5 LEDs should have come on when all the loose wires are tapped. 90% of the lights should come with up to (6) wires, (3) black, (3) red, for halos and LEDs. As long there are no wires hanging around, then your tried them all. If you checked to see if you spliced them correctly; then it might be the headlights that are defective. I hoped this helped.
Hello Spec D Tuning, your video has saved me BIG time...!! Can you please make a video on how to remove the Front and Rears Seats for Toyota Celica 1.8 VVTI 2002 model?
@mrslatezb There will be no custom wiring other than about 4 wires for power and ground. We have a video for that. How to hook up the Halo and LEDs. Watch the video, and you will find that it will not be that difficult. Good luck
@robbiebomber1 Do you have DRL's on your car? and did you follow instruction on wiring halo's and LED's? you probably wired those to your low beams.. your halo's and LEDs are to be wired as parking lights. hope this helped
@UntilNextYear1 the HID's are 8k's as far as the high beams it should be 6k. but i wouldnt see a point in installing HID's to your high beams since they do take a little time to brighten up, so the highs werent HID
You can find them at either Electronic Stores ( AutoZone, Pepboys, O'Rilley Autoparts) The size that would match the wires in your car around 16-18 GAUGE sound be fine.
What is the driving light connector that I have to plug into the leds I can’t find anything about it online or at my local auto parts store everything else works besides the halos and led lights
We have a video on how to connect the LED lights and if you are missing parts please give our customer support team a call and they will be happy to help you out.
I just these lights for my 2004 celica, followed your install instructions in the box, and watched the videos. I was able to remove the bumper, lights, etc. and add the connectors and wires as you instructed as well. The low beam headlights work, the high beam headlights work, the blinker works, and the Halo ring lights work, but the LED lights do not and these are suppose to be brand new. Can someone from SPECDTuning respond on what could be wrong? Keep in mind ive watched your install videos and wiring installation video. i look forward to your response.
@Specdtuninginfo that other video is not showing it done on a Celica its like a honda accord or something. i just got these light and i was trying to install them my self and i used the mail-female and a quick connect to connect the halo part. but the Led has a whole different hook that u have to plug it in something. so how do i connect the 5 leds to the car so they turn on when the halo comes on.
ok the turn signal bulb and that gray other thing at 3:09...does that come with the headlights when ordering them or does pieces come from the old headlights which u just transfer to the new ones?
I have 02 gt have had spec d rear led lights and bought headlights from spec d today (both smoked) hooked everything up and it looks great however after i turned on the car and drove it a couple times I noticed that my tail lights didn't illuminate when the headlights are on and also the led rings and line of leds didn't work, never had any problems with tail lights until now any suggestions?
Had these lights installed for a couple months now, and I was wondering if I installed the LED rings around the main high/low beam bulbs wrong cause seeing as there was no where to connect them I bridged the connection to the main LED strip connection. Unfortunately about 2-3 months in now and 3/4 LED rings are completely blown out. I just wondering if its the tiny LED bulbs or the connection that is bad. Wanted to know cause changing the ring bulbs is a pain since it requires bumper going off
Do you have to take the whole bumper off if i wanna remove the small grill piece with the toyota emblem on it. Or can i pop it out somehow or is it screwed on
have these lights for my celica followed the instructions for fitting and when i wire the halo/led to the connecter for sidelights they trip my rear tail light fuse any help would be great
I apologize but I translated with google and google translate what I write. I try to tell you that I find at all those LEDs which are found inside the angel eyes. and I searched even on k2motor where you said. fail to find that light from the lighthouse.
is there any way I can get these headlamps installed somewhere in Plano!! or how much would it cost to ship the headlamps here + have them installed in a shop in Plano TX
I got these installed today it`s the same headlight but the bulb is regular ? i mean it`s yellow ? is it supposed to be like that . why your middle bulb is white ? pls help
Thank you for the comments, we look forward to bringing you more videos in the future. By the way, they are some nice looking lights. Let us know if we can help in any ways during installation. Good luck!
I just got these lights in and they look amazing!! Only thing is, my LED aren't working. I don't know where to connect the wire from 3:32. I don't have a driving light socket. Also, I didn't receive the female and male parts. Please help!!
You guys are the bomb. Great product and great instruction video. The car looks amazing now. (Of course, it looked pretty good beforehand, too.) As a noobie, I thought 1-2 hours top. 7 hours later... Problems included: Thought I had to remove fog lights to remove bumper, LED lights didn't work, Halo lights didn't work, brights didn't work, not knowing how to unplug plugs/bulbs, putting side bulb back in was a bear, etc. etc. But it looks great!!! Well worth it!
EXCELLENT VIDEO. PROFESSIONAL ! I had a loose clip, passenger side, holding the upper light on a 2001 GT. I DID NOT need to remove the bumper. Just loosen and lower about 2 inches, then loosen 3rd bolt.
Excellent video. Especially like the all the "please" :-) Recommend you link your halo video in the description.
the best demonstration ive ever seen, good video and thanks!
@malikahsan1990 Sorry, we did not get a chance to show it, but the gray driving light socket and turn signal sockets are from your original headlights. Thank you
No you would have to use the bulb size on the headlights you would like the HIDs to go in. so if you want to use HIDs for your stock headlights then get that size but if you want it for the headlights in the video those would be a different size.
@jobedd Thank you for the comment! Always a pleasure to get good feedback!
@santoyo801 Make sure you get the correct light bulb application for the headlights. The application should be same as the projectors. Sorry, we do not sell HIDs, so we do not have a video out for installation. However, the way the HIDs are made now are pretty much plug and play.
@ToonFanCarl Not too sure about that, generally its possible to do it without having to remove the entire bumper and light, but its harder to do so. if you can reach your hands behind the housing then it would be possible.
@Onkelz91Best You will have to check with your local laws. Because the standard of DOT (department of transportation) in the US is different
@angelv89 be sure to check on your wirings and how you connected them. not quite understanding how it keeps blowing your fuse, which it shouldnt unless you really did something wrong
@santoyo801 If you have the same brand which is TM headlights, then you should be able to change any of the light bulbs, there will be no problems, however, if they are sealed, please check with your seller for more info. Thank you.
@angelv89 did you also go through with how to wire your halos? both halo's and LED's act as your parking lights or they can also act as your DRL's. they dont have any association with your low beams unless you made some changes and wired them to do so.
@robbiebomber1 Additional Wiring is Required for Halo's and LED, and those are to be wired along with your parking lights, you COULD however wire them to your low beams. did you purchase this product from us? maybe our customer service reps can help you with your issue.
@Garyhernandez These lights are great quality! How are you liking em?
Great video ... will help for sure when I install these awsome headlights.
Thank you for the comments, however, the car was a customers car that was used to have the item installed. That was the only way that we could get so many different models of cars. Sorry, we do not know what type of rims they are.
excellent video. it was very helpful
Check to see if the bulb is fully seeded in.
@DxBOY617 yes, they require extra wiring for the halo's and LED's
Where do you wire the halos to?
Hi have had these lights for nearly 2 years no problems, used this video to intall Thanks. But how do you adjust the beams, my mechanic and I can't see any adjusters, any help would be appreciated.
wow i was looking to buy those headlights for my celica and i might now that i see how nice they really look on a celica
The halos that will just depend on where you wire them to like head lights or side lights or with the LED's.
Hey it is 2018 and i know this video was made in 2010. Do the newer models of these come with 5500k or 6000k led chips and the halos? I really dont want to buy these if they have that blue tinted leds and halos.
@malikahsan1990 The 5 LEDs should have come on when all the loose wires are tapped. 90% of the lights should come with up to (6) wires, (3) black, (3) red, for halos and LEDs. As long there are no wires hanging around, then your tried them all. If you checked to see if you spliced them correctly; then it might be the headlights that are defective. I hoped this helped.
@azngitano Agreed. They do look nice for the Celica with the way they added the additional lights. Thanks
thanks. and when "plugging everything in" will the LED's and halos light up as daytime running lights would? or when would they turn on?
Fantastic video! We need these for everything lol
How long have you had these lights for? If within out warranty period you are able to get a new set. Please give our customer service team a call
Hello Spec D Tuning, your video has saved me BIG time...!! Can you please make a video on how to remove the Front and Rears Seats for Toyota Celica 1.8 VVTI 2002 model?
@mrslatezb There will be no custom wiring other than about 4 wires for power and ground. We have a video for that. How to hook up the Halo and LEDs. Watch the video, and you will find that it will not be that difficult. Good luck
@robbiebomber1 Do you have DRL's on your car? and did you follow instruction on wiring halo's and LED's? you probably wired those to your low beams.. your halo's and LEDs are to be wired as parking lights. hope this helped
@UntilNextYear1 the HID's are 8k's as far as the high beams it should be 6k. but i wouldnt see a point in installing HID's to your high beams since they do take a little time to brighten up, so the highs werent HID
You can find them at either Electronic Stores ( AutoZone, Pepboys, O'Rilley Autoparts) The size that would match the wires in your car around 16-18 GAUGE sound be fine.
What is the driving light connector that I have to plug into the leds I can’t find anything about it online or at my local auto parts store everything else works besides the halos and led lights
Where do you connect the ground and power wires that are connected to the led little bulbs that go across headlight?
We have a video on how to connect the LED lights and if you are missing parts please give our customer support team a call and they will be happy to help you out.
just bought these head lights a look great only problem is that i cant figure out why the leds wont turn on it keeps blowing a fuze
@robbiebomber1 daytime running lights, they do also function as parking lights but run during the day..
Thank you so much for your comments, we look forward to bringing you more of installation videos to come.
@celicafan100 we're glad we made things simple for you =]
Is it good to use hids on these after market lights? i installed leds but cant even see in the dark..
Nice video. Plan on ordering some of these for my Celica =)
I just these lights for my 2004 celica, followed your install instructions in the box, and watched the videos. I was able to remove the bumper, lights, etc. and add the connectors and wires as you instructed as well. The low beam headlights work, the high beam headlights work, the blinker works, and the Halo ring lights work, but the LED lights do not and these are suppose to be brand new. Can someone from SPECDTuning respond on what could be wrong?
Keep in mind ive watched your install videos and wiring installation video.
i look forward to your response.
@Specdtuninginfo that other video is not showing it done on a Celica its like a honda accord or something. i just got these light and i was trying to install them my self and i used the mail-female and a quick connect to connect the halo part. but the Led has a whole different hook that u have to plug it in something. so how do i connect the 5 leds to the car so they turn on when the halo comes on.
ok the turn signal bulb and that gray other thing at 3:09...does that come with the headlights when ordering them or does pieces come from the old headlights which u just transfer to the new ones?
@fentoozler89 This is done in house.. and its to change out the entire headlight housing.
I have 02 gt have had spec d rear led lights and bought headlights from spec d today (both smoked) hooked everything up and it looks great however after i turned on the car and drove it a couple times I noticed that my tail lights didn't illuminate when the headlights are on and also the led rings and line of leds didn't work, never had any problems with tail lights until now any suggestions?
that is a nice celica like how it set
SPECD: *What kind of SOCKET WRENCH are you using and where can I get one?*
Take out the bulb you have in it right now and check what size is it. It should either be H1 or H3
What's the body kit on the celica it looks nice
What LED color did you use to match halos?
what is the song starting at 0:51? it's been stuck in my head all day :O
Had these lights installed for a couple months now, and I was wondering if I installed the LED rings around the main high/low beam bulbs wrong cause seeing as there was no where to connect them I bridged the connection to the main LED strip connection. Unfortunately about 2-3 months in now and 3/4 LED rings are completely blown out. I just wondering if its the tiny LED bulbs or the connection that is bad. Wanted to know cause changing the ring bulbs is a pain since it requires bumper going off
but see that you have a message with a picture of the light .. forgotten to post and say if you know what I mean... thanks
depends on your local auto shop
all the LED's we sell if it requires resistors we will include them.
Is there a super bright led u can use for hi and low beam please let me no thanks
@Specdtuninginfo its blowing my parking light fuze and i have the halos connected to my low beams
Do you have to take the whole bumper off if i wanna remove the small grill piece with the toyota emblem on it. Or can i pop it out somehow or is it screwed on
Yousef Ishaq The Toyota emblem is attached to the complete bumper. You might need to remove the complete bumper if you want to remove that part.
In America they are sold by Carid.com in other countries im not sure where they are sold.
do the LEDs need resistors to be installed or do you include them?
have these lights for my celica followed the instructions for fitting and when i wire the halo/led to the connecter for sidelights they trip my rear tail light fuse any help would be great
I apologize but I translated with google and google translate what I write.
I try to tell you that I find at all those LEDs which are found inside the angel eyes. and I searched even on k2motor where you said. fail to find that light from the lighthouse.
is there any way I can get these headlamps installed somewhere in Plano!!
or how much would it cost to ship the headlamps here + have them installed in a shop in Plano TX
What body kit do you have on the car ?
I got these installed today it`s the same headlight but the bulb is regular ? i mean it`s yellow ? is it supposed to be like that . why your middle bulb is white ? pls help
The lights are type H3 right?
you do not any other wiring components? different bulbs, conversion kit etc.
How do i change them fron left hand drive to right hand drive?
What do I do with the black and white wires?
Do you guys have any projector headlights or LED taillights for a 2010 Honda Pilot?
Any ideas how I can get my halos brighter? Mine are no where near as bright as these here \=
that first plastic cover he removed at 1:05 i need for my celica, does anyone know where i can buy it?
What did you actually do besides lengthen the wires ??
what size does it use on HIDs? I bought h1 but they were a totally different size.
How long does it take a professional to fully fit.
@toyotacelica2zzge
looked it up and it looks like it's a GT Widebody Front Bumper
just got my headlight just want to know where u connect the led light
um...don't you have to reaim them after disturbing everything?
Thank you for the comments, we look forward to bringing you more videos in the future. By the way, they are some nice looking lights. Let us know if we can help in any ways during installation. Good luck!
Please watch our video showing how to connect the LED's and Halos. How to wire LED's and Halos.
this headlight model doesn't have to be extra wired right?
@ToonFanCarl H1 for high beams, H3 for low beams =]
what type of bulb does it use for (Low Beam H?) and (High Beam H?)
Hi, quick question, the headlight been fitted in to the celica in the video, is it black smoked or chrome? Thanks
TMLproductionz smoked
Does anybody know where can I get the small LED lights they are starting to go out. It hasn't been a year since I purchased them .
what size of h.i.d bulb will it fit in this i just order soe and want to put soe h.i.ds on it
Does these lights have e-marking for use in EU countries ?
Can HID's be used with these headlights?
I just got these lights in and they look amazing!! Only thing is, my LED aren't working. I don't know where to connect the wire from 3:32. I don't have a driving light socket. Also, I didn't receive the female and male parts.
Please help!!
I have the same problem, the 5 LED lights are not working.
Really confused why you took the whole bumper off
What's the size of the screw that's connected on the fender & the bumper?(1:46)
What size are the replacement bulbs for your HID Projector Headlights for the Celica? I bought replacement low beam bulbs but it didn't fit...
please take out the ones they came with and check what size they are. They should be H1 or H3
How much would that cost to have it installed ?
I watched 1 minute and decided to go to Midas.
Anytime!
:52 what is the size of those clips? and where to buy those?
Why would you replace oem projectors with crappy aftermarket I dont get it lol