HOW TO SUBLIMATE ON CANVAS WITH A LAMINATING SHEET
HTML-код
- Опубликовано: 27 авг 2024
- HOW TO SUBLIMATE ON CANVAS WITH A LAMINATING SHEET
Hello Cricuters!
I have to admit that no matter which printer I use, I will keep my current SUBLIMATION PRESET. I had to change the SUBLIMATION setting that I thought would work, and go back to my original setting in order to SUBLIMATE ON CANVAS WITH A LAMINATING SHEET.
I still didn't love the final result and I would definitely prefer to use the process of covering the canvas with POLYESTER fabric; however, this is another option. If you haven't seen my tutorial on how to SUBLIMATE ON CANVAS WITHOUT A LAMINATING SHEET, click here: • 💖How to Use Sublimatio...
Please follow along with me as I share my process for creating a SUBLIMATION PRESET for my new EPSON WF-7820 and share how to SUBLIMATE ON CANVAS WITH A LAMINATING SHEET.
⭐⭐⭐In order to complete this project, I used the following materials:⭐⭐⭐
✅Hiipoo Sublimation Ink - amzn.to/3FIhsn5 with syringes: amzn.to/3oRYSBl
✅A-SUB SUBLIMATION PAPER - amzn.to/3ylMXPj
✅Epson Workforce WF-7820 Printer - amzn.to/3s2mCoc
✅Cricut Heat Resistant Tape: amzn.to/30t6GzX
✅Pen + Gear Laminating Sheets - purchased locally
✅Cricut 9 x 9 Easy Press - amzn.to/3DYacQG
✅Cricut Heat Press Mat - amzn.to/3oUpod3
✅HTVRONT Small Heat Press -amzn.to/3ILMqLc
⭐⭐CRICUT ACCESS PREMIUM: cricut.pxf.io/...
👉Feel free to shop my Amazon Storefront for all my Favorite Things!
👉www.amazon.com...
💳💳Shop from the Cricut Website:💳💳
cricut.pxf.io/...
⭐⭐I will earn a small commission from eligible purchases, at no additional cost to you.⭐⭐
💖💖💖Thank you so much for supporting me and this channel!💖💖💖
⭐Come and get social with me.⭐
Links to all of my socials: linktr.ee/craf...
My Website - craftingwithdelonda.com
Instagram - / craftingwithdelonda
Facebook - / 272801197679910
Thanks for watching,
Bye 😊
#sublimationoncanvas #epsonwf7820 #sublimationprinting
![Oasis - Oasis Live '25 [Official Trailer]](http://i.ytimg.com/vi/gol_JnuEtKM/mqdefault.jpg)
Delonda. I agree with you. I did this just last night after seeing a video of someone posting it. I ordered the laminate, and it turned out the same as yours. I didn't care for my photo results either. I also used a smaller heat press too. I had the wrinkles, and i couldn't get them out. I might try again with my big press.
Thank you for sharing.
I followed these steps using the flat canvases, my htv ront auto press at 385 and mine came out absolutely beautiful - SO- I think the problem was the heat press, because you didn't have the same pressure all over all at once (I hope that makes sense). I absolutely LOVE how mine turned out, and I wouldn't have tried it if I had not seen your video first! Thank you so much for all of your tutorials! They definitely help me put my cricut to use.
That is fantastic!
By now you have probably figured it out but options: 1) Remove the canvas from the boards since you do not have an even solid object in the hole. The fabric, when pressure is applied is going to seek the low point and pull towards the center, causing the side wrinkles because of the pull and then you can place it on the large heat press for even heat distribution and weight. 2) Cut a board that fits exactly in the hole, however you then may get lines at the point of placement all around as the heat is still not distributed evenly - you can just build one board to fit but that would still take you to "1)".
Thank you
“I don’t like it at all!” 🎶🎶🎶 😂 omg love your personality
Gotta be honest 😫😫😫🥴💀🤣🤣
A friend of my wife just became an American citizen last week, legally sworn in after the 5 year waiting period or whatever the time is now. We sublimated on canvas the picture she sent of her holding an American flag on that day and even screen printed a t-shirt with a message on it. The canvas came out really nice. A proud moment for her, I am sure. Thanx for the videos and the ideas.
Wow! Congratulations ❤️
That is phenomenal.
Delonda.. Girl you are amazing! I love the feeling that I get as though you are the gal next door. It is rare that people film their mess ups, and it was really nice that you are keeping it real. Thank you for posting what you did, the fact that you did not like it, and then changing things, showing us, and then liking your project. Stay amazing.
I tried it your way, but the photo did not adhere to the middle of the canvas, only to the outsides. I took off the canvas and am trying to do it flat.
I am so sorry for just responding. I am trying to get myself on track and one thing I said I was going to do is respond to every comment I missed. Thank you very much!
Try it this way: ruclips.net/video/T9EwtIDFHTg/видео.html
So I bought some canvas watched your video then saw one you might wanna know about. They sprayed the canvas with Mod Podge clear acrylic (go outside for this 😷)
It worked Awesome!!
Just wanted to share…
you are so helpful and amazing you probably already know this.
Thanks for the tip!
OMgosh, not a fan of the subbing on canvas with laminating sheets for sure! Love love love the family photo though! But not when you were green! LOL I do like how the one on the wall turned out better too. Thank you for sharing the not so great, I don't think hiding the oopsies help anyone, but seeing not so greats do help! We can go back and say oh yeah that happened to Delonda, how'd she fix it...or not. :D Keep up the good work!
I totally agree! Thank you Shari!
You're the best!!
Thank you!
Oh my goodness this is awesome...this will be perfect Christmas gifts...too bad I have no family I'd do this for right now 😥
Oh no! I hope things get better soon! Thank you for joining me during the premiere. I sincerely appreciate it.
WOW those are so nice! I had no idea you could sub on metal!!
Yes you can! This is an old video and I wanted to relive this moment!😂
Such excellent guidance 💯 thank you Delonda
You are so welcome 💖
Sorry I dont speak English very well but I thought It was the heat press... With the sublimation process is a fundamental that control the pressure time and temperature and with cricut type heat press is difficult to control the pressure. Maybe that's why the blank spot. Try to use the another heat press that have the pressure control knob. Excellent video... 👍
Greetings from Panama...
Thank you ❤️
I can’t wait to try this
Do it, do it!
Just a tip put a towel tuck under well, so you have even pressure
Thank you 😊
Maybe your heat press was too high when you pressed the laminating sheet to the canvas and that is what caused the wrinkles or maybe there was something wrong with that laminating sheet 🤷🏽♀️ . On a positive note, the color settings on the second picture was definitely more vibrant. I love that you decided to post this video even though the results were not what you wanted them to be. It is all a learning experience. I call it research and development 😊
Ooooooh, that is going to be my new phrase...this is "research and development " 🤣😭🤣😭🤣. I love that! Thank you 😊
OMG I wrote my question before you started 😦
Another YT video uses 1.5m which is half the typical thermal laminate. It embeds into the canvas better. Make sure to pre-press the canvas before applying laminate to release moisture. Leave enough laminate oversize to pull tightly around sides and laminate onto back surface over the staples. This seems to help eliminate the wrinkles. Even so, none of the results are particularly appealing in my opinion.
Thank you for sharing.
Good video thanks ❤
Thanks for watching ❤️
Oh no! That wasn’t really great, but you’re the best with showing this. I never tried it like this.. not sure I will try it 😟 the photo looks fantastic on his own ❤️ next time it will work, I’m sure it will!
Thank you Hennie 😊. I am sure I won't try it like this again 🤣😭🤣😭
I can't wait to sub on metal again! I did a couple tags and loved it! I'd say the heat/pressure was a factor in the wrinkles in one for of another.. Have you tried the 9 - 7 - 15 -4 adobe 2.2 setting?
I haven't tried that setting. Did you get good results with it?
Yes the 2.2 works perfect and the flat canvas at dollar tree work amazing …
Going to try it! Thank you 😊
what made you change the colors???
Best process for glossy canvas photos? Poly or laminating sheets? Any other process? Thx
I prefer poly.
Did you use rapid tac under the thermal.paper?
Nope. Polyester fabric
Thank you
You're welcome
What a shame…. It is a beautiful photo. I prefer the one on the wall as well. Maybe try that again but with your bigger press? I dont know what happen there. I watched this two times but i still dont get were it went wrong. I do love the way you teached and explain the steps. It is easy to follow!
It’s the first time you didnt like or LOVEEEE your work. But i know you will make up for it and make a nother one and it will turn out perfect
I agree Angel! It's the first time I didn't love it. I didn't want to hide it though because we can learn from good and not so good.
@@CraftingwithDelonda thats the spirit! Trail and fail is part of the process, part of the journey 😉
ÿØÿáêVExif II* Help, this is what shows up on my screen when I upload a picture. Does anyone know how to switch it over to photos. Thank you in adance.
You can't upload a picture here. My contact information is on the about tab.
Uneven pressure.
Remove canvas
Use a clamp heatpress
Thank you
It’s for us at 1 o clock AM 😅
If i am awake i will be there…. I cant promise but i hope to be here
Come on Angel! Take a nap and set a timer ❤
@@CraftingwithDelonda i was soo tired. But i saw your live first thing this morning. I saw i have a second chance today right? Same time?
@@CraftingwithDelonda 😂 I didn’t make it, to tired 😴
❤❤❤
Yes, I am going to post this morning ❤
I’m curious what it is about canvas that we can’t sublimate on it. I attempted what you just did with laminate but it wrinkled (same as yours) except I pulled the laminate back off the canvas because I hated it. But it appeared to have left some laminating residue behind. I thought what the heck I’ll try to sublimate on the canvas with the residue and I was able to make it work. It’s not vibrant but it worked for me. Wish I could show a picture here.
That’s a great question. I sure wish I had the answer. I have a Facebook group and I’m on IG.
I’m a beginner what is the best printer for a beginner I have a circuit explore2 never use it so I been follow you had it for week
Hello, If you are interested in sublimation printers, I can only refer you to the one that I have, which is the Epson 2760.
Delonda at what temperature and how long would I use it using the Cricut heat press 9x9???
400 for 60 seconds but with ALOT of pressure.
I'm looking at buying a epson sublimation printer off Facebook Marketplace . Is there a particular model that I should be buying ?
An Epson Ecotank...look for 2720, 2760, 2803, or something similar. Do not buy an Epson Workforce.
@CraftingwithDelonda thank you so much for your advice. I found a barely used epson et 2760 on Facebook marketplace for $80. Now we just have to clean out the old ink and I'm with the Hippo. You are an amazing teacher.
Thank you ❤️
That is a fantastic deal!!! Try using syringes to get the old ink out and then print some purge pages.
could it be easier to sublimate on polyester fabric and then apply to canvas and add vinyl lamination adhesive roll over it?
I’m not sure.
Just got some canvases. Is it necessary to change the printer settings. Right now I have it set for tymbkwrs
Not necessary to change the settings if you like the way your colors are working.
How do you know what setting to put the printer on for the colors?
Never again, Janet 😂
Mines (laminating sheet) keep bubbling up.
Lower the heat.
Can you use this process on fabric and shirts too?
Hi there, I am actually going to be LIVE at 6:30pm CST this evening. I am doing a sublimation tutorial. ruclips.net/user/livebCecGwgDJKA?feature=share
Where did you get your big blue heat press from ?
I purchased it from 143vinyl. Here is my link: StarCraft 15 x 15 Clamshell Heat Press - www.143vinyl.com/starcraft-heat-press-15x15-clam-shell-mint.html?partner=494693
What heat press do u used?
Epson WF-7820
Where did you get your canvas
I bought them from Joann's.
not enough pressure maybe on right side
That's probably right!
cardboard to place in back to give it a solid base.
Thank you 😊
definitely not a good idea to use a heat presser smaller than your canvas. thanks for the video
Idk how to do ANYTHING ON MY LAP TOP Sry for yelling I use caps to say idks lol 😆 sry but I gotta go on my Google and find out how to do all these on my laptop cuz im lk a newborn baby idk ANYTHING ik im in a VERY bad way trying to start a business but since covid I spent all my savings on all these machines and I've submitted mugs and made some $ but shirts I suck at I got a new press lk urs I got critcut big hand press too but the big one is better I got Minnie press and I got 2 mug presses alway I bought a brother cutting machine ive not even tried to use and I feel bad for cuz ive had it for a yr and not used yet cuz I was kinda Familiar So I'm afraid to use my brother because I feel like I already kinda know cricket even though I don't know but maybe 10% it scares me to start a new machine but that's why I spent $400 on that machine so if anybody has any advice please let me know cause I'm really scared is brother easy to start do you have any videos that you can recommend for me please I need help and I need to start Doing stuff I put all my savings into this after I lost my job and I need to be able to make money consistently
I totally understand. In my opinion, you should focus on using one machine. If you have already used your Cricut, maybe try to sell the Brother machine.