Go Kart Live Axle Kit: Homemade Go Kart Axle
HTML-код
- Опубликовано: 23 июл 2024
- Go Kart Live Axle Plans. Get them here: kartfab.com/live-axle-go-kart-...
Live Axle Go Kart Kit. Get it Here: goo.gl/720SYb
Homemade Go Kart Axle Article: kartfab.com/go-kart-plans/home...
This video shows how to build a homemade go kart axle, also known as a dead axle go kart. It also shows plans to build a live axle go kart and compares the pros and cons of live axle vs dead axle.
The instructions I have on my website for free plans include the dead axle, one wheel drive go kart. I also have $20 go kart plans that are for a live axle go kart kit on the plans page.
There are two main types of go kart live axle kits:
1) converting a go kart to live axle
2) building a live axle go kart from scratch, which includes all the live axle go kart parts as well as the tires, wheels, steering, brakes, throttle, seat etc.
Get the Free Go Kart Plans
kartfab.com/go-kart-plans
How to Build a Go Kart Playlist: • Go Kart Plans: Go Kart...
PREVIOUS VIDEO: How to Make a Go Kart Frame • How To Make a Go Kart ...
NEXT VIDEO: Go Kart Floor Pan • Go Kart Build: Floor Pan
kartfab.com Visit my website for go kart plans, restorations, and maintenance walk throughs
Visit my channel for more go kart videos / kartfab
Get more KartFab:
Follow KartFab: / kartfab
Like KartFab: / kartfab
KartFab Google+: plus.google.com/+KartFab
Instagram: / kartfab
Read about how to make a homemade go kart, using steel tubing and bolts to make a go kart axle: kartfab.com/go-kart-plans/home... 
Авто/Мото
2:33 “beat it with a hammer until it’s straight”. Great parenting advise!
Best comment😂
just wanted to say great video, been looking to make my own axle for a while now, your video explained it in seconds. thank you
no prob
Another great video.
Wow, this was the guide I needed!
cool vid , im trying to upgrade to live axle on yard cart from dead axle
love these man keep it up!!
I love your videos. Thank you
Our partner will get an incredible project after it's ready ... Taking advantage of writing there together we are stronger ... Big hug partner!
I had a question i have a classic go kart you can see it on my channel but i dont know where to buy a new drive wheel hub its a 1 wheel peel and the hub is destroyed
I have a leaner shaft and a go kart tyre.how should I assemble /pair them?I mean ,should the shaft be changed or can I do something else? please help
Are bearings necessary in the wheels or can I just slid the rim on and call it a day?
What software did you use to make the 3d model?
How is that a live axle
I think the title is wrong. He talks about the live axle briefly, but showed how to make the one wheel drive dead axle.. Maybe he planned on showing how to make both.
bigdogbigben I’ve waited almost a year for a response
@@steelernation9320 OMG I love u
DIY With Reza hahaha
Lol😭🤣🤣
Hello, nice videos.
What clutch is the best to off road and climb some hill´s.
The torque converter or reduction wet clutch.
thanks
+Paulo Cardoso torque converter is best for off road.
Good vid! Concise. Exactly what i was looking for. I’m subscribed.
Awesome, thank you!
i want to make a go kart from scooter engine.i need to use the scooter tyres.can anyone suggest a proper way to make axle for that?
Thanks for the vids, what would be a estiment of profit selling one of these after build with HF motor ?
no idea
Thanks for this video mate ! I am planning to do the same except that I am using 10mm bolt cause my bearings are smaller. Do you think it is strong enough?
Try it and find out.😀
I'm working on a dune buggy right now and ur like very helpful
Hi just what I'm looking for I have a smoker that I need to build a cart for because I very heavy and I'm living it to a concrete only I need something with bigger wheels so I would like to make a wagon style cart to set my smoker on so I can pull it around the yard can you help me out with the axles
vamos por ahí excelente
marco prado como estas asiendo tu prollecto men???
thx man this helped a lot
Can you do a video on the axle bearings
"free go kart plans" I have go say the video is very helpful though
i know ur comment is 4 yrs old but the plans themselves are free, not the go kart
what will be better engine or ganrator
How much did you spend in all on the go kart
I have purchased the live axle plans and am working on the deluxe-upgrade version. However in the plans it is not clear how it is assembled, what is welded and where, and where it is even attached to the frame. This video said it would cover the live axle but it did not. Do you have a video that covers this or anything that would go into more depth on how this is assembled?
+Sean Mauck Sean. Feel free to message me on here or Facebook with questions. I am still making video of the deluxe build. The front end is the same as the free plans. Rear of kart for live axle is completely different. Plans do explain it well as many people have messaged me with their completed builds. You can check out my Facebook page that has pictures of the completed builds of the deluxe live axle plans as well facebook.com/KartFab
Where can i find a tire and hub set up like you show in the video for a dead axle?
links in description
Would be able to add a 6 inch bolt other side can put second sprocket and brake to add a second motor more power would it fit on this frame?
Yes but it would be hard to steer and requires jackshaft.
how do I jump start a live axle kart I buyer a kart 2 days a go and it won't start on ground coz when I pull the pull start both the wheels move on floor and carnt pull it proper and when I lift bk end up and start it when I put it on floor it cuts out strate away any idea
no idea, its called "bump starting" and you can see on wiki how.
if i have a 500CC Snowmobile motor im gonna use will i still need a torque converter
snowmobiles usually have their own style of torque converters.
Typically, you would see a comet 94C or 'duster' drive unit with a
similiarly named driven unit. These were meant for the high rpms of a 2
stroke engine.
hi, I have a question. I have a dead axle go kart. right now I'm looking to replace the drive wheel but am stuck. my cart uses 3/4 bore sprocket. I can't find a wheel online with a sprocket attached with a 3/4 bore. this may be noob question... but is there a way to attach a sprocket to a rim. my current wheel being replaced has the sprocket welded. so I can't replace the sprocket that's attached to it. so I have to get another rim that will fit the 3/4 axle and have a sprocket.
+Austin Geary yeah, there are 1 3/8" OD bearings that have a 3/4" ID sprocket is attached to drive wheel via flange/bolts, usually with a brake drum too.
What type of metal (stainless, zinc plated, galvanized, grade 8 steel, etc) is used for the bolts that make the axle? If it's being welded to plain steel, does it also have to be just plain steel?
Bolts can be grade 5 or grade 8
what program do you design your go-kart with I seen you're on the computer or phone what's it called
cad
can you make it a 2 wheel drive or not
Awsome video thank u...
very helpful
Thanks A MILLION
where did u get the bolt from. can't find them eny where. is the axle u use there 1 inch??
Its in the plans in the description. I got it from a hardware store (tractor supply). Any place that sells hardware should sell bolts like this (in the US at least).
I'd be going mental doing all that work and then not doing a live axle! One wheel peels are definitely simple and have a place in the Karting world but once you drive a live axle kart its all over. Its more money but makes more sense. Then again, so does centering the motor over the rear end 🤔.
Could I just buy a piece of 1"X1" and use that for the axle
+InTense Snpr1 yes, 11 ga, 1"x1"
Does the dead axle option cause one side to slightly steering in one direction or is it negligible?
negligible.
I want to do this similar for home made trailer for yard sprayer
can you help me with my rear axle do hickey?
+Robbie-rob Garcia what's up?
can you provided 3D degine of it
Anyone else have trouble finding dead axle kits? I want dead axle, but with 2 motors (independent of each other).
I seriously can not find a dead axle kit. I'm not seeing one linked in this video either...
Also what size bolts (other than 4 and 6 inches) did you use for your custom axle? Like what's the thickness? Head size? And metal type? :D
Edit: Nvm I went to your kartfab site and saw you're using 5/8s inch (and 1" square tubing). Thanks!
can you use a galvanized bolt to use as an axle?
yes but very harmful to weld
What is the hub for the sprocket called on a dead axle
+Jonathan Torres the hub is part of the drive wheel, it is the rim. So the drive wheel assembly contains the rim/hub, brake, tire and sprocket.
What engine did you use and how fast does your kart go
+Nick Forrest predator 212cc and 25-30 mph
Is there a way to contact you privately?
Dose a live axle allows the wheels to turn independently while the go kart is turning?
no, a live axle is the exact opposite. What you are wanting is a differential.
@@KartFab thank you
How long is the axle
.i want to buy a engine please give link to me
I can't weld but I need an axle like this but I'm putting an engine on a skateboard and will only need one wheel, the other problem is even if I could weld the base of it all is made of wood, basically, how do I attach a very short dead axle to a wooden board
yeah, you will need to weld some gussets to a plate and bolt the plate through the wood.
Como puedo comprarlo. Soy de Perú
what gear ratio would you use with a 6.5hp and 19" wheels.
+i2aspire clutch or torque converter? off road or on road? racing, or for fun? weight?
ok so I just got a live axle go kart but I have no tires except for the ones off of my other go kart which is dead axle. I was wondering if the wheels would still function. basically my question is could you take the wheels off of a dead axle and put them on a live axle?
+Alec Key did the live axle go kart come with rims on the rear axle?
+KartFab yes but they aren't the same size as the tires I need to put on the go kart
+Alec Key you need to put tires that fit the rims on the kart.
can u give in reply mazerment of each part I.e lanth.width outer n sub lanth n width inner.how much cost of of part without engine as I have engine.please please reply urgently.
video description
What is a cheap welder
i am going to build a go cart but i dont know how wide and long can you help me wiht that
its in the plans, just have to open them and look at the numbers.
How do you know what size axle to get? I see some kits have different lengths of axles ?
Between 36 and 44” is about where I have seen them. 36 for narrow 1 seat go karts and 44” for two seaters.
@@KartFab ok thanks I'm using a frame from a manco dominator pretty big so I guess I'm going with the 44in
what the programmes name your use to desgin it ??
cad
thank you
love your videos. can you make a video of a live axle being installed?
yeah, by the end of the year.
@@KartFabdid you ever get the chance to post that live axle assembly video? Can't figure out how to stabilize the axle from sliding laterally.
After buying the plans, about how much money would the parts for it cost?
+Steveg101 it's on the plans page FAQ
Ok, thank you :D
bro i need a help i want to know how to paint a fibreglass sample plz tell this in ur next video its urgent
what program do you use to make your plans?
Cad
yes but they aren't the same size as the tires I need to put on the go kart
what program do you use for your plans?
Cad
+KartFab thanks and really fast response :)
do u have any blue prints for a dingo style go cart at all?
Unfortunately, no. Have you tried looking on Craigslist and eBay for a used one? That's probably your best bet.
+KartFab yeah I have an they r still really expensive and hard to find.
Just have to be patient. I was able to buy a dingo for $100, $250, $80, and $80 (keep in mind that this is searching frequently for go kart and they were in bad bad shape, had to spend a lot of $ and effort to get them running and driving)
+KartFab gotcha where did u find them for that low of price and where do u find most of ur toys at?
Craigslist
what size bolts did you use for this
+Evan Morris 5/8"
I would have ground the head of that bolt enough to slide in the tube. Plug weld inside and bead outside, much stronger.
What the software you use to make thus stuff called
+Kevin Espinal CAD
Is it not bad to weld a bolt? They have coatings on them that vaporize when you weld and I'm not sure grinding it really removes it all.
No it’s not bad. The coating is zinc and even if you didn’t remove it there isn’t enough of it there to have a measurable response to the exposure. You don’t get metal fume fever from welding two bolts.
@@KartFab Ah, ok! Thanks for the help - I subscribed BTW! I'm new to the go-kart scene, and I'm not one to use other people's plans and call it my creation, but these videos really help me with my design as all go-karts have similar components. Another question - I'm planning on using an 1800w motor for mine, and it has a T8F sprocket. For the drive sprocket, how hard would it be to attach this: tncscooters.com/index.php?route=product/product&product_id=135 to this wheel: www.harborfreight.com/10-in-pneumatic-tire-with-white-hub-62409.html
@@texemplarstudios5481 please, for the love of god, do not use MOVING DOLLY wheels for a go kart.
@@KartFab I've seen a lot of people use them, or at least similar wheels... do you have any recommendations for wheels that would fit onto a 5/8" bolt?
@@texemplarstudios5481 go kart wheels of course.
can you install 'parking'revers'Drive'and nutral
You mean a transmission?
Are pillow blocks or axel hangers more strong
Axle hangars are because pillow blocks are usually bolted through tubing, compromising its integrity.
I am looking for a axle that moves both wheels but on a small budget can you tell me how please
kartfab.com/live-axle-go-kart-plans
Thanks
Sir please tel me how can i made reverse gear in go kart please
You buy a FNR gearbox and run the clutch to the gearbox and figure out shift linkages.
or just add two engines and rig it up to where to throttle is equal on both wheels so you'd technically have more power
Won't there be a steering differential with a one wheel drive?
A tiny bit of torque steer, but you are dealing with a little go kart engine here, not a car engine so its barely noticeable.
What do you do with the extra 2 inches of threads sticking out past the wheel?
You can cut it off.
I just bought a live axle kit from GPS and the extra flustered me a bit. Have you played around with they're predator 212 engine mounts?
The “extra” is for different types of hub mounts so it’s compatible with mounting more things to the axle. I’ve used the predator mount on the mini bike you see in this video. I’ve also used their bigger motor mount for Honda gx390/predator 420 engines. Good mounts to weld onto frames because they have that lip on them so they don’t flex like a flat plate.
Mantap bang..😊🙏👍
how can i make both wheels drivers?
kartfab.com/live-axle-go-kart-plans
Ok thank you
Lol just use a straight rod with two bearings and a welded sprocket on the rod any how how much is Steel at steel places is it cheaper than buying at lowes?
+LOLitzDanny if you use a "straight rod" it will likely bend. You should never weld an axle. Steel at a metal distributed is many times cheaper than lowes.
+KartFab ok thank you very much I appreciate your response
where to buy the bolts?
Tractor supply
can we use a genrateor to make this go kart
+creative channel yes but generators usually have a tapered shaft. You may need to double check and other an adapter for the shaft.
can we use Electric welding to join the iron roda
sorry rad
Curious why you dont just tack it with your welding squares in place
The welding squares are magnetic and it actually messes with the arc when you weld. You often times get really weird things happening when you expose the welding arc to a magnetic field.
What size tubing was that
1”x1” 11ga
what kind of welder is that?
A fancy schmancy one
how much would u charge for that dead axle
I dont sell things I make to people.
I’m going to add to mine, an electric motor for the opposite wheel, to act as a kind of boost.
Does it matter if the metal is 2" by 2" rather than 1"by 1"
+InTense Snpr1 the axle material needs to be 1"x 1" in order for the bolt to be welded to it safely. If you were to use 2"x 2" material for the go kart axle, you would probably need to add a section of steel plate to to the ends and weld the bolt to that steel plate. If you have enough fabrication know how, you can make most things work.
Think of it this way, buy a piece of 1"x1" steel for at most $2/foot and you are going to spend about $6 max with no headaches, or you can try the 2"x2" and see how it works.
Will the kart be able to go over a hill on the road?
Yes depends on how steep
@@KartFab Do you sell live axle frames and kits for sale and ready to assemble?
Can I use a live axle with the free plans?
+Jordan Avendano they have the standard live axle kit instead of the free plans kit, which is almost identical to the free plans (brakes are set up differently, brake rod, and live axle weldment is set up differently, engine mounting is centered with a special piece of steel bar) So........other than that, they are virtually identical. If you got the deluxe live axle kit, you would be in hot water and need to buy my live axle plans to follow it. the standard live axle plans come with my deluxe live axle plans. Its up to you if you want to go without the plans, I just offer support for those that bought plans, not those that did not.
+KartFab oh well I'm just a high school kid with a budget so I had to choose the free plans, but I appreciate the input, oh and your videos are really helpful I've been working with my teacher in my welding class to make this go kart I just hope it turns out well. Once again thanks for the info
No problem, just dont cut corners with the braking system, and never run it without a kill switch close by.
send me free gokart plant book which show all mezerment two seater in gokart which engine used please reply for engine name
+Bhupendra Desai ok, just read the description.
how does the tier move then?????!#?
+brandonfix engine turns clutch, clutch turns chain, chain turns drive wheel sprocket, drive wheel sprocket turns drive wheel assembly. Drive wheel assembly has two bearings on it that ride on the longer bolt.
+KartFab ok thanks
The Bering is on the wheel
how to do a 2 wheel drive?
Did you read the description/
Which material it's chassis made of
steel
@@KartFab please reply proper size and quantity
@@KartFab can a steel pipe carry weight of 500 kg
what welder do you have
would this MIG-130 Flux Core Auto Wire Welder work
any welder will work that is 90 amps or higher.
alright just bought it looked up a revew on it and they sed it was good my dads old welder gave out
any way to make a dead axle without welding? :)
+lazerduck not safely
alright, thanks for the answer :)
good luck!!!
Fucking duct tape
Its_Comett Ps4 😂😂😂😂😂