I’m just thinking how your kid’s gonna grow to be a heck of an aviator and an engineer with all that awesome experience and such great time with his dad! That’s mighty cool to watch. Not sure if you can do that but would be great to see more of the actual mechanical work being done, in details. Thanks Jimmy!
For a (quite) detailed view of airplane mechanics have a look at what these guys are doing. They are restoring a plane almost from scratch, it's a small channel but I have been following it from the beginning: ruclips.net/video/9EfijY9PEsA/видео.html
I fix up and sell old vehicles and I’ve been on countless sketchy first test drives, but I can’t even imagine the butterflys in a guys gut when you’re test flying an old plane that’s been sitting in pieces and then put back together. You got big brass balls Jimmy 👍
@@michaelb.8953 .... if ya doubt get the hek out no room for doubt when on the right route hope he always gets lucky and flys like a dukkie!!! :) i could go on, but for now I be gone....
Dude your sense of humor towards yourself is hilarious. I first watched you a few months ago and watch your content alot now. I admire you for living your dreams out and not worrying about the outcome. I wish I had the same resources. I make 90k year so it would take about 1 airplane to put me in ruins. Kudos to you and the same goes to your family for supporting you .
Yeah it seems like it takes not just 6 figures but deep into 6 figures to fly GA airplanes these days. Just the fuel alone is enough to put you in the poor house. $6 a gallon at my local FBO and you're going to be using 10 gallons an hour minimum if you're going to be flying something big enough to take the family. Times two on a twin.
I'm glad you made it safely home. I really enjoyed watching and hearing you go through your checklist. You got down-right serious. I would like to hear about your scariest moment in flying as well as your funniest moment. Even though I'm not a pilot, I love being your virtual fly on the wall and watching & hearing what you do. Your skills and wisdom are awesome!
Love your channel and admire what you do. I’m a former skydiver and after a very bad accident a few years ago, hung up my gear for good. I crave the air still and started taking flight classes. Only 10hrs in but loving it, thanks for the videos
Thankfully, your tenacity is off the charts. Lessor men would have thrown in the towel long before. Your videos are perfect for someone like me and I wanted to express my gratitude to you for sharing. I'm getting back in the year after 13 year hiatus. GOD BLESS AND PROTECT YOU!
Happy New Year! What an AMAZING helper you have. Mini Me can do it all. He does a great job of filming and also crawls under the dash. I look forward to more videos of both of you!! Oh and some planes too.
36:03 “trim is set” after you are already rolling for take off. I take it you are at about the 200-300 hour mark? That a pretty dangerous place in your experience, always using a consistent check list is important. Especially when you are flying such a large variety of planes that you do.
@@seinfeld11123 I should lose weight not take drinks look both ways lots of things I should but sometimes they do not get done. I live imperfectly hopefully no one shots me for it...
@@karlstruhs3530 yeah thats fine but you are not flying a plane above houses and populated areas. what you do in your own time is fine. this guy has a responsibility to be safe. and he isnt doing that. big difference my man between you and him
@@seinfeld11123 You aren’t a pilot, let alone an aircraft owner. You have probably never even flown in a light aircraft. If you would like to know more about what qualifies Jimmy to fly, repair, and maintain aircraft, I recommend you call your local FBO and tell them you would like to do a full hour in a 172, warrior, or like aircraft. Then, purchase the 2022 FAR/AIM and read the relevant Parts (91, etc).
My dad had my brother and myself at the airport as young teens. Dad and bro are pilots and I was too blind to get a medical but all 3 of us have had awesome aviation careers !!! It’s a living… with great stories and memories !!!
So true... years ago my husband had an engine out.. The A&P that had performed the annual failed to safety wire the oil drain plug after the change... naturally, some hours in, that plug worked itself out, and the engine seized. Thank goodness there was appropriate time and terrain for a smooth landing in a corn field.
@@michaelcordero5588 On safety critical bolts/nuts/etc there are these things called "safety wires". Basically you have a wire that ties the nut and bolt together in such a way that they cannot turn. Similar to a castle nut with a cotter pin, but even more secure. Obviously a drain plug isn't exactly a bolt+nut, but a similar idea applies. I have never worked on an airplane, but the same thing is used in all kinds of industries where you really don't want things falling apart in operation.
A licensed A&P can perform either 100 hr inspection or an annual inspection. Annual inspections must have the appropriate log book entries approving the aircraft for return to service. This requires the mechanic to have an IA rating attached to his certification this stands for inspector authorization. A mechanic with just an a&p certification can only make log book entries on 100 hour inspections. Most aircraft engines have a quick drain these are spring loaded closed and you press them up in a detent to open the valve. Some engines will have a finger screen and an oil screen or a finger screen and a spin on filter. All finger screens or oil screens utilize a copper crush washer the smooth side of the washer goes towards the turning surface in order to seal the plug or the cap. I'm a licensed aircraft mechanic and have been for 30 years and not one aircraft that I've turned to wrench on or my fellow mechanics that I work with had one fail due to a maintenance related activity. You can generally take a mechanic and make a pilot but you can't take a pilot and make a mechanic. A lot of pilots get their a&p certification after the fact so throughout the year they can save themselves on maintenance cost. They only seek a mechanic with an inspector's authorization to get that sign off on an annual inspection. So sometimes what happens after an annual is anyone's guess
Great videos, only just discovered them a few days ago. I used be an engineer with Dan Air in the UK back in the day and it's a real pleasure to see someone showing both the flying and the fixing. Thanks!
The FAA may have other things to say on the matter, but if the chrome job on the spinner was Sputtered on instead of electroplated, then there was no metallurgical changes to the base metal. Even if it was electroplated, then there shouldn't have been any changes to the base metal. if chroming is banned due to dissimilar metals causing a corrosion cell. then the chrome could simply be ground off and the base metal repolished.
Hi Jimmy as a Blackman I have my kids watching your show its awesome. You are truly a good father my kids love your show we learn more intelligent info from you..your awesome....and very smart....we give you so much respect when we watch your it's always good...may the Lord be with you and family...
My dad was in WW2 and Korea. When I was young, I used to kind of fantasize about flying in a P51d. I'd get some altitude, the come dow out of the clouds at 400 mph, all 6 50 cal guns blazing at German aces. What the hell was I thinking?
Hey Jimmy. I am new to your channel, I have noticed a lot of your old planes have a problem with over heating. I recommend that you use slick 50 in your engines. All of them it is a metal treatment coats all of your metal with teflon..u can run your engine with out oil and not sease up. I sold it in the 80s. U will never overheat. Even while taxing. Auto zone sells it for 29dollar. Thank u for your time
I had a similar problem on my cardinal with the RPM. I fly out of a short strip, so power is kind of important. All of the "experts" kept telling that not reaching max rpm was normal until I reached a higher airspeed. Long story short, they were wrong, the prop governor adjustment screw threaded boss had cracked. I sent it off for overhaul and now I reach 2700 RPM on static. Max RPM on the first part of the takeoff roll makes a huge difference when operating from a short (1730) airstrip. My engine is an O-360, 180 HP. I'm confident that yours should reach max RPM on static runup.
Jimmy my man... I don't know what your bride would say but there are two characteristics you have in abundance. Patience and determination. Oh, make that 3 characteristics... add in unfailing good humor. Your mechanical skills, knowledge and understanding are to be envied. You tackle projects that lesser men would run away from. If you decide an airplane can't be rehabbed it surely is time for the final trip to the junkyard. In my almost 50 years of flying I've never seen anything like it. To say I'm impressed would be an understatement. Happy New Year to you and yours!
That looks like FA40 in Port Richey. Just missed you. We just bought our Twin Comanche from there and flew it all the way home to Montana. Keep up the good videos and safe landings.
When you was installing the engine and then the governor, I noticed that there is a ring of weld nuts around the governor location of the firewall. It looks like the cover can be removed or installed from INside the plane. This may be done to allow governor adjustment after installation. I can't visualize burying such a critical adjustment so it cannot be accessed after the engine installation.
@@stevehicks8944 I reported said "services", it will be removed. If you would like to join me in cleaning up our/your favorite channels, just hit the . . . next to the post and hit "Report". Have a good day and a great New Year!
Hi Jimmy. I’m not sure if the Siera has a shoulder harness but with the nature of your restoration flights I would suggest trying to fit / wear one, especially as a few recent reported accidents have proved greater survivability when wearing one. Keep up the great work.
This channel is gaining subscribers at jet speed, and it's very well deserved. When I subscribed it was around 45k subscribers, and that was well under 12 months ago. Love this content. Definitely my fastest click for new videos!
When I first started watching your videos I thought you were a naive and crazy airplane nut. You haven’t lost the crazy descriptor, but I’ve joined the thousands of others who envy your way of life; and the adventure that lies ahead. Stay safe.
Love your channel. You got me hooked. Got myPPL years ago and stopped after a few years cause life got in the way. Now retired, gonna get back in the game. Thanks for your knowledge and humor.
Sorry Steveo1...as much as I love your videos, you have now moved to the number 2 position :). Great stuff Jimmy! Your channel is better than Netflix...
Watching your son under the dash reminds me of me many decades ago. One time in particular was helping my father and his friends doing an annual on a Cessna 180. They had the “kid” crawl through the luggage compartment to feel around for cracks around the rear controls. The mechanic told me yell if if found one. He was surprised when I did. I guess it became a service action (sorry forget the aviation term). To this day pretty much every time I see him he brings it up and tells me that I probably saved the owners life when I found that.
I love this show, you are crazy funny, feeding that money to the side window was a classic, that engine sounds like you need a new kanooten valve and the cap sapparator might need adjusted. If you ever take off from Craig JAX. Southbound you flew right over my place, I'm 5 blocks from the sw end. Cheers from Jacksonville Florida 🌞
Are you sure it's the governor limiting the RPM? Did you check the mechanical low pitch stops on the prop? Did you get 2700 with it unloaded in flight?
Hello Jimmy, great vid. Quick comment: when in a fully static runup, you shouldn't reach redline rpm, even with a constant speed prop, but 20-40prm lower (but not 150-180 as you are experiencing). Reason is the prop reaches full forward stop. So when the governor fails, less prop angle does not make sense (so it makes thrust when it fails). I sure hope your governor overhaul (or rather new one) wasn't in vain I am not an A&P. Please correct me if you know better or the maintenance manual says esle. I fly a 210. Same same but different
Ahh, but do you talk as much as Jimmy. Idk but is that a nervous thing for all pilot's or is Jimmy just a jaw breaker? Either way, I hate flying and I take my hat off to ANY pilot, quiet or a rambler.
The reason he had a perfect Landing his because he already landed once before you got there. LOL. He better watch out for the speed cop that's sitting up behind the cloud running radar
Thanks for the video! Be careful with that airplane. (PIlot and Mooney owner here.) If the prop fine-pitch stops are adjusted correctly for the airframe/engine, and the engine is making full power, then you should get like 50 rpm less than redline statically. If not, then either 1) the governor is kicking in too soon (but it looks like you adjusted the governor), 2) the engine isn't making anywhere near full power, or 3) the propeller's fine pitch stops aren't adjusted right. You can probably have the prop preliminarily checked for the right pitch, since you can do that with the prop on the plane. Another thing to check will be how much lift the camshaft is making. Sometimes with neglect the camshaft gets rusty and ground down, and the symptom is insufficient rpm. I had a friend who had a Mooney that had that problem. It would only ever do 130 knots. He finally had it torn down and the camshaft was toast. Good luck!
Hey Jimmy. Love the Channel! Just food for thought. Chocking both rear gear instead of the front gear can prevent a nose collapse in the unlikely event that the front gear lock fails. Unlikely but man those whirly things are expensive.
There is a difference between max static and dynamic RPM, even with a constant speed propeller. Typically the max static RPM is set 50 to 100 lower then the red line. On a single engine installation, the prop at the hub, is set for that lower max RPM (via mechanical low pitch stops). This is done so if you have a prop gov failure with the prop "going flat" (loss of oil pressure at the hub), the prop still produces "acceptable" thrust. During my aerobatic days, a friend of my had a prop pitch set too low, lost the gov and could not make it back to the airport. So even if you set the prop gov for lets say 2800 RPM, you will never get it during a static run, since the prop is as flat as it can be. You will however get that 2800 RPM during dynamic or take off run! Now if the prop gov RPM is set lower then that desired static RPM of minus 50-100, cranking up the prop gov RPM will make a difference during static run up. Cycling the prop at 2000 RPM really does not test the "governing" part of the governor, since it is still sitting in a large under-speed condition. Yes the prop drops RPM, oil moves around but that is it. To test the gov you should bring the RPM with the throttle in the middle or lower part of RPM. So lets say 2300 RPM, now slowly back out the prop to 2250 RPM. The prop governor is now in control, you are in the constant speed range. Now you can adjust the throttle by few inches MP, up and down. The RPM should remain constant. Last thing in mind is to make sure you do not increase the MP beyond the recommended RPM/MP as stated in the POH. You can go over-square at these lower power settings, its actually desirable but that is another discussion. So that's the technical part. Your "will it run" videos are fun and since the planes stay on the ground, no harm is done. This flying vid however increases the stakes, it places certain "responsibility" on you to do things "right". Lots of people are watching, mostly not pilots. As a 16,000 hr pilot, instructor and all that, this vid is not sending the right massage. You are too casual about it all.....
The engine baffle seal looks very short. It probably needs to be taller so that it doesn’t flop over towards the back. You don’t want to be short on cooling in Florida. Any air leaking past the seal has a significant effect on CHT’s.
I’m digging this channel… it’s like Hoovie’s Garage but with some seriously real consequences, but actually with much more mechanical skills to display. Keep it up man and stay safe(ish)
Another successful rescue! You're doing a great thing by saving these old planes. If you haven't already, get rid of the plastic wrap on the SCAT hoses on the engine!
Request: When you run into a problem which needs solving (e.g., the hose sticking out, and others) - if it's worth filming the problem it's definitely worth filming the solution...don't leave us hanging!
Good chance the spinner was simply highly polished and then clear coated, clear coat is paint in the eyes of the FAA and is legal. If polished properly it will look like chrome and the clear coating will chip near edges as it ages.
WHAT COULD GO WRONG ??? SAFETY HARNESSES = Please, please do install proper safety harnesses for you and your passengers. I recall a video of a winter time engine out crash in the mountains. The right seat passenger and wife of pilot smashed against the instrument panel. The daughter in the back seat walked to get help. Just like your Sierra -- Seat belts only as the plane was old. FAA -- Shoulder Harness Kits A shoulder harness is your ticket to a long career in flying. Without use of a shoulder harness, even a minor accident can cause a serious injury or death. Why take a chance? Flying is rewarding and fun. Keep flying as long as you can. If you follow two recommendations you can greatly improve your chances for a long flying career. These are: If your airplane has shoulder harnesses, use them. If your airplane is not equipped with shoulder harnesses, have them installed as soon as possible
Had the exact same issue with a Commander 112A that I ferried from PA to Tampa. Had to move the governor up by a tooth and adjusted the prop stops. It was two weeks of high speed taxi and static run-up’s. All new in our case, but never properly set. Damn airplane almost killed me on takeoff from Smoketown PA. Lessons learned. Always do a full power static check when unsure.
I guess the cylinder compression's checked out so valves needing longer for better seating shouldn't be too much of a problem. Exercising the prop even when not needing to isn't a bad idea to make sure it's always fresh oil and not stagnant able to hold moisture in the hub. You made it that's the most important thing :)
I used to take the controls when flying a friend's 172 down in AZ. Sadly, he is passing away these days, but you've got me thinking i need to get my license and start flying. I really enjoyed it.
I owned a Sundowner (Sierra with fixed gear) once, 1971 model, with Lycoming )-360. I installed the JPI system and was always seeing an initial rise in the oil temps at takeoff and climb, and they would come down as I decreased the climb rate or leveled off. It turned out the baffling had some bad areas and was causing the majority of the issues. The baffling on the Sierra is particularly susceptible evidently to cause some overheating. You might want to look at it and make sure they are all in good shape. It is a fine airplane, with heavy undercarriage. It can take a lot of abuse.
Thank you And your Son for an excellent video again. I usually watch then several times each, the way you put it over is exactly how it happens. James from Scotland.
Hey Jim! Don’t throw the spinner away! There’s a hugh market out there where people turn these items into furniture. Id love to do that. They could use it to make a desklight or whatever. Saves you a few bucks for your plane! As always, great vid and thank you!! Happy flights!!
Engine Oil Usage - I had a 79 Piper Archer 180 HP, cross country round trip Pennsylvania to California that did not use any oil, it had been a Corp owned plane, I had talked to the owner, they used straight aviation mineral oil in the engine for the 1st 50 hours before switching to an AD oil, the piston rings must have been nicely broken in…
How magnificent that must be to have such confidence and skill and be able to cope with all the complexities that have to be watched while at the same time enjoying the experience. As a non pilot I'm full of admiration for this as I know I couldn't do it. You've got to have the right brain-wiring to cope with it all. My father's skills as a Pilot in WWII were not handed down to me :-(
New sub here (fmr Pvt Pilot & A&P) and I must say you sir are channeling Ed O'Neill's Al Bundy as an aviator persona from another timeline. Props.. er, kudos 2U and your conscripted progeny! Looking forward to PLENTY more from this channel.
Oh nice, did one of these flights after an airplane was in maintenance for 5 months couple of weeks ago... nothing like saying "what the heck was that thump" while flying a few times!!!
I love seeing, "Mini Me" helping dad. Airplanes, cars etc come and go; these memories and the relationship building last forever.
True. So of my best memories as a child his age were attempting to help my father fix cars and the lawn mower.
I’m just thinking how your kid’s gonna grow to be a heck of an aviator and an engineer with all that awesome experience and such great time with his dad! That’s mighty cool to watch. Not sure if you can do that but would be great to see more of the actual mechanical work being done, in details. Thanks Jimmy!
That or a cameraman. He does good work on his videos.
For a (quite) detailed view of airplane mechanics have a look at what these guys are doing. They are restoring a plane almost from scratch, it's a small channel but I have been following it from the beginning: ruclips.net/video/9EfijY9PEsA/видео.html
@@glennwatson Easily as good as Jolene
That’s a good point!
I hope they will become creators of new iconal airplanes !
The best thing I love about your videos is your Father and Son relationship. I RESPECT you just for that!! Stay Blessed!!!
Me, too...
I fix up and sell old vehicles and I’ve been on countless sketchy first test drives, but I can’t even imagine the butterflys in a guys gut when you’re test flying an old plane that’s been sitting in pieces and then put back together. You got big brass balls Jimmy 👍
Yup, you can't pull over to tighten a loose fan belt or investigate a "Check Engine Light" at 7000 ft.
Jimmy got big brass balls capped off with a chrome plated spinner.
@@michaelb.8953 ....
if ya doubt
get the hek out
no room for doubt
when on the right route
hope he always gets lucky
and flys like a dukkie!!! :)
i could go on,
but for now I be gone....
@@michaelb.8953
That's funny.
I was worried about that plane taking flight with that extra ball weight there. haha.
Dude your sense of humor towards yourself is hilarious. I first watched you a few months ago and watch your content alot now. I admire you for living your dreams out and not worrying about the outcome. I wish I had the same resources. I make 90k year so it would take about 1 airplane to put me in ruins. Kudos to you and the same goes to your family for supporting you .
Yeah it seems like it takes not just 6 figures but deep into 6 figures to fly GA airplanes these days. Just the fuel alone is enough to put you in the poor house. $6 a gallon at my local FBO and you're going to be using 10 gallons an hour minimum if you're going to be flying something big enough to take the family. Times two on a twin.
@@JimBronsono😊
I'm glad you made it safely home. I really enjoyed watching and hearing you go through your checklist. You got down-right serious. I would like to hear about your scariest moment in flying as well as your funniest moment. Even though I'm not a pilot, I love being your virtual fly on the wall and watching & hearing what you do. Your skills and wisdom are awesome!
Yes! Thank you! I like to joke around... but sometimes, just gotta get it done. :)
I absolutely love this channel. Jimmys enthusiasm is sooo contagious. Please keep up the good work
Love your channel and admire what you do. I’m a former skydiver and after a very bad accident a few years ago, hung up my gear for good. I crave the air still and started taking flight classes. Only 10hrs in but loving it, thanks for the videos
Not a pilot, and never flown in a plane of any size. I just can't stop watching your channel.
Thanks so much!
You can be…. Never too late.
@@taggartlawfirm Nah
The cheapest ppl is at least 10 times the average salary here lol
Thankfully, your tenacity is off the charts. Lessor men would have thrown in the towel long before. Your videos are perfect for someone like me and I wanted to express my gratitude to you for sharing. I'm getting back in the year after 13 year hiatus. GOD BLESS AND PROTECT YOU!
As a young aviation enthusiast this is by far my new favorite channel
@GABRIELLA no
Happy New Year! What an AMAZING helper you have. Mini Me can do it all. He does a great job of filming and also crawls under the dash. I look forward to more videos of both of you!! Oh and some planes too.
Wanted to say it but don't know how to spell it
36:03 “trim is set” after you are already rolling for take off. I take it you are at about the 200-300 hour mark? That a pretty dangerous place in your experience, always using a consistent check list is important. Especially when you are flying such a large variety of planes that you do.
the guy shouldnt be allowed to fly, oil leaks, untested plane, the whole deal is really bad
@@seinfeld11123 I should lose weight not take drinks look both ways lots of things I should but sometimes they do not get done. I live imperfectly hopefully no one shots me for it...
@@karlstruhs3530 yeah thats fine but you are not flying a plane above houses and populated areas. what you do in your own time is fine. this guy has a responsibility to be safe. and he isnt doing that. big difference my man between you and him
@@seinfeld11123 You aren’t a pilot, let alone an aircraft owner. You have probably never even flown in a light aircraft.
If you would like to know more about what qualifies Jimmy to fly, repair, and maintain aircraft, I recommend you call your local FBO and tell them you would like to do a full hour in a 172, warrior, or like aircraft.
Then, purchase the 2022 FAR/AIM and read the relevant Parts (91, etc).
@@LostAnFound lots of assumptions here mate. you know nothing about me
This is Jimmy's world... let's just hope Jimmy STAYS in this world! LOL
Let’s hope so 🙏🏻. Jimmy for governor!!
Ow he just bought one lol.
I don’t think Jimmy is from this planet.
SAAAAAAAAWEEEEEEET
Hahaha I hope so to
for real!
HOW WONDERFUL IT IS TO SEE THE SON HELPING DAD IN THE REPAIRS BEATS DOING VIDEO GAMES EVERYTIME
Well thats why you have kids, to get into the little spaces you cant :)
@@roadsweeper1 and to bring you tools when you're stuck somewhere:)
My dad had
my brother and myself at the airport as young teens. Dad and bro are pilots and I was too blind to get a medical but all 3 of us have had awesome aviation careers !!! It’s a living… with great stories and memories !!!
Jimmy, have to admit you got me caught up in the process and the conclusion of this project. Nice to see you home safe and sound. Thanks for Sharing!
As an old airplane ('56 Cessna 172) owner l always enjoy your resurrection videos Jimmy! Thanks for making them
AMAZING HOW THE GLASS COKPIT REPLACED ANALOG GAUGES ON ANY FUNCTIONS
@@rsprockets7846 Too bad he didn't keep the analog dials. Perhaps they were broken.
So true... years ago my husband had an engine out.. The A&P that had performed the annual failed to safety wire the oil drain plug after the change... naturally, some hours in, that plug worked itself out, and the engine seized. Thank goodness there was appropriate time and terrain for a smooth landing in a corn field.
"Wire the oil drain plug" ??
@@michaelcordero5588 On safety critical bolts/nuts/etc there are these things called "safety wires". Basically you have a wire that ties the nut and bolt together in such a way that they cannot turn. Similar to a castle nut with a cotter pin, but even more secure.
Obviously a drain plug isn't exactly a bolt+nut, but a similar idea applies.
I have never worked on an airplane, but the same thing is used in all kinds of industries where you really don't want things falling apart in operation.
A licensed A&P can perform either 100 hr inspection or an annual inspection.
Annual inspections must have the appropriate log book entries approving the aircraft for return to service. This requires the mechanic to have an IA rating attached to his certification this stands for inspector authorization.
A mechanic with just an a&p certification can only make log book entries on 100 hour inspections.
Most aircraft engines have a quick drain these are spring loaded closed and you press them up in a detent to open the valve.
Some engines will have a finger screen and an oil screen or a finger screen and a spin on filter.
All finger screens or oil screens utilize a copper crush washer the smooth side of the washer goes towards the turning surface in order to seal the plug or the cap.
I'm a licensed aircraft mechanic and have been for 30 years and not one aircraft that I've turned to wrench on or my fellow mechanics that I work with had one fail due to a maintenance related activity.
You can generally take a mechanic and make a pilot but you can't take a pilot and make a mechanic.
A lot of pilots get their a&p certification after the fact so throughout the year they can save themselves on maintenance cost. They only seek a mechanic with an inspector's authorization to get that sign off on an annual inspection.
So sometimes what happens after an annual is anyone's guess
What I like about this Jimmy is that he not up his own arse like that flight chops geezer who takes himself way too seriously.
Perfect comment
Great videos, only just discovered them a few days ago. I used be an engineer with Dan Air in the UK back in the day and it's a real pleasure to see someone showing both the flying and the fixing. Thanks!
The FAA may have other things to say on the matter, but if the chrome job on the spinner was Sputtered on instead of electroplated, then there was no metallurgical changes to the base metal. Even if it was electroplated, then there shouldn't have been any changes to the base metal. if chroming is banned due to dissimilar metals causing a corrosion cell. then the chrome could simply be ground off and the base metal repolished.
I agree. Honestly, the whole thing is kinda silly. Not one crash has ever been caused by a chrome spinner breaking in operation.
When Jimmy says "we just made a preflight check" - I somehow have a hunch that this preflight check is like "yep, it's there, we are good to go" :D
Hi Jimmy as a Blackman I have my kids watching your show its awesome. You are truly a good father my kids love your show we learn more intelligent info from you..your awesome....and very smart....we give you so much respect when we watch your it's always good...may the Lord be with you and family...
My dad was in WW2 and Korea. When I was young, I used to kind of fantasize about flying in a P51d. I'd get some altitude, the come dow out of the clouds at 400 mph, all 6 50 cal guns blazing at German aces. What the hell was I thinking?
Hey Jimmy. I am new to your channel, I have noticed a lot of your old planes have a problem with over heating. I recommend that you use slick 50 in your engines. All of them it is a metal treatment coats all of your metal with teflon..u can run your engine with out oil and not sease up. I sold it in the 80s. U will never overheat. Even while taxing. Auto zone sells it for 29dollar.
Thank u for your time
I had a similar problem on my cardinal with the RPM. I fly out of a short strip, so power is kind of important. All of the "experts" kept telling that not reaching max rpm was normal until I reached a higher airspeed. Long story short, they were wrong, the prop governor adjustment screw threaded boss had cracked. I sent it off for overhaul and now I reach 2700 RPM on static. Max RPM on the first part of the takeoff roll makes a huge difference when operating from a short (1730) airstrip. My engine is an O-360, 180 HP. I'm confident that yours should reach max RPM on static runup.
Yeah, he should confer with a few more experts and try to solve that. Maybe it's the model of propeller that is limiting the rpm?
Very cool Jimmy! Love your story telling. Can’t wait to see the Sierra finished.
Your videos are always entertaining and educational. Keep ‘em coming!
@GABRIELLA no
Jimmy my man... I don't know what your bride would say but there are two characteristics you have in abundance. Patience and determination. Oh, make that 3 characteristics... add in unfailing good humor. Your mechanical skills, knowledge and understanding are to be envied. You tackle projects that lesser men would run away from. If you decide an airplane can't be rehabbed it surely is time for the final trip to the junkyard. In my almost 50 years of flying I've never seen anything like it. To say I'm impressed would be an understatement. Happy New Year to you and yours!
I just don't get it why this channel didn't exceed the one million subs yet.. There's no other channel like this. 💥
Silas is definitely headed for an A&P certificate. He is already getting a taste of the joys of aircraft maintenance!
That looks like FA40 in Port Richey. Just missed you. We just bought our Twin Comanche from there and flew it all the way home to Montana.
Keep up the good videos and safe landings.
Your son is an A&P in the making! He makes this A&P proud 👏
When you was installing the engine and then the governor, I noticed that there is a ring of weld nuts around the governor location of the firewall. It looks like the cover can be removed or installed from INside the plane. This may be done to allow governor adjustment after installation. I can't visualize burying such a critical adjustment so it cannot be accessed after the engine installation.
@GABRIELLA Wrong place to advertise your “services”.
@@stevehicks8944 I reported said "services", it will be removed. If you would like to join me in cleaning up our/your favorite channels, just hit the . . . next to the post and hit "Report". Have a good day and a great New Year!
@@eugeneweaver3199 I did too
I did too...
How'd you make room to get the governor off, will removing the 2 top engine mounts solve my dilemma 🤔
Thank you for bringing these birds back to life.
Love this era. That interior is gorgeous.
Hi Jimmy. I’m not sure if the Siera has a shoulder harness but with the nature of your restoration flights I would suggest trying to fit / wear one, especially as a few recent reported accidents have proved greater survivability when wearing one. Keep up the great work.
This channel is gaining subscribers at jet speed, and it's very well deserved. When I subscribed it was around 45k subscribers, and that was well under 12 months ago. Love this content. Definitely my fastest click for new videos!
Thanks so much.
@@therealjimmysworld another 5000 subscribers in the last 2 days since I commented! That's crazy good! 😀
This is quickly becoming a favourite channel.
Thanks for your comment, glad you enjoyed the video!
When I first started watching your videos I thought you were a naive and crazy airplane nut. You haven’t lost the crazy descriptor, but I’ve joined the thousands of others who envy your way of life; and the adventure that lies ahead. Stay safe.
Perfect end of my day, new episode out from my favourite pilot personality 😊
Thanks for your comment, glad you enjoyed the video!
Love watching you Jimmy, cheers mate. You bring a lot of pleasure to us that watch you.
I love watching these videos… When your life is on the line it keeps us all watching to see how it ends😂 You’re doing great! Keep it up!
Love your channel. You got me hooked. Got myPPL years ago and stopped after a few years cause life got in the way. Now retired, gonna get back in the game. Thanks for your knowledge and humor.
If you keep the channel kid friendly like Vicegrip Garage, this channel will really grow. Just found you and love it, and I don't fly.
Sorry Steveo1...as much as I love your videos, you have now moved to the number 2 position :). Great stuff Jimmy! Your channel is better than Netflix...
Jimmy! you've helped me decide there is NO economy perspective on light aircraft.
Ultralight or paramotor is not too bad. Still not cheap but a lot cheaper.
AWESOME YOU MADE IT.... Yes More Videos to come. I enjoy you vids Jimmy, Thank You. Clear Prop!
Watching your son under the dash reminds me of me many decades ago. One time in particular was helping my father and his friends doing an annual on a Cessna 180. They had the “kid” crawl through the luggage compartment to feel around for cracks around the rear controls. The mechanic told me yell if if found one. He was surprised when I did. I guess it became a service action (sorry forget the aviation term). To this day pretty much every time I see him he brings it up and tells me that I probably saved the owners life when I found that.
My new favorite RUclips channel! Love the enthusiasm with planes, energy and overall goofiness!
I love this show, you are crazy funny, feeding that money to the side window was a classic, that engine sounds like you need a new kanooten valve and the cap sapparator might need adjusted. If you ever take off from Craig JAX. Southbound you flew right over my place, I'm 5 blocks from the sw end. Cheers from Jacksonville Florida 🌞
very cool! Thanks so much!
Well done Jim,great Job.. Pleasure to watch you do your thing and make it work..Made up for you Jim.
Are you sure it's the governor limiting the RPM? Did you check the mechanical low pitch stops on the prop? Did you get 2700 with it unloaded in flight?
I wasn't sure I was going to like the channel but I gave it a try and I was definitely pleased. I felt very entertained. Thank you.
Hello Jimmy, great vid. Quick comment: when in a fully static runup, you shouldn't reach redline rpm, even with a constant speed prop, but 20-40prm lower (but not 150-180 as you are experiencing). Reason is the prop reaches full forward stop. So when the governor fails, less prop angle does not make sense (so it makes thrust when it fails). I sure hope your governor overhaul (or rather new one) wasn't in vain
I am not an A&P. Please correct me if you know better or the maintenance manual says esle. I fly a 210. Same same but different
Ahh, but do you talk as much as Jimmy. Idk but is that a nervous thing for all pilot's or is Jimmy just a jaw breaker? Either way, I hate flying and I take my hat off to ANY pilot, quiet or a rambler.
I thought rpm would increase when engine unloaded in flight?
An aero modeller?
@@jaydee7614 not with constant speed propeller. When unloaded, the blade angle increases to maintain rpm, hence "constant speed prop."
should absolutely reach the redline RPM during a static runup, verified with a strobe tach. Otherwise, you don't achieve full power.
I'd much have a new governor if there is any doubt and the age of that one scared me. Money well spent to be sure it won't cause issues.
Enjoy your dedication for serious humor and airplanes. Keep up the good work !
The reason he had a perfect Landing his because he already landed once before you got there. LOL. He better watch out for the speed cop that's sitting up behind the cloud running radar
Thanks for the video!
Be careful with that airplane. (PIlot and Mooney owner here.) If the prop fine-pitch stops are adjusted correctly for the airframe/engine, and the engine is making full power, then you should get like 50 rpm less than redline statically. If not, then either 1) the governor is kicking in too soon (but it looks like you adjusted the governor), 2) the engine isn't making anywhere near full power, or 3) the propeller's fine pitch stops aren't adjusted right.
You can probably have the prop preliminarily checked for the right pitch, since you can do that with the prop on the plane.
Another thing to check will be how much lift the camshaft is making. Sometimes with neglect the camshaft gets rusty and ground down, and the symptom is insufficient rpm. I had a friend who had a Mooney that had that problem. It would only ever do 130 knots. He finally had it torn down and the camshaft was toast.
Good luck!
Hey Jimmy. Love the Channel! Just food for thought. Chocking both rear gear instead of the front gear can prevent a nose collapse in the unlikely event that the front gear lock fails. Unlikely but man those whirly things are expensive.
Did I hear correctly - $55,000 for the engine?
Mom and Dad were both small engine pilots...I miss those days... good stuff my man.
One thing I learned watching this channel is how expensive it is to own a private plane.
Jimmy, it's a very new motor. You should expect high oil temps until the engine loosens up a bit. It's tight. Calm down.
That kid is going to be a tech before turning 18
"we get to take the engine off again". Dude, you are hilarious! Jim Carrey brother. Thx for the smiles!!!
There is a difference between max static and dynamic RPM, even with a constant speed propeller. Typically the max static RPM is set 50 to 100 lower then the red line. On a single engine installation, the prop at the hub, is set for that lower max RPM (via mechanical low pitch stops). This is done so if you have a prop gov failure with the prop "going flat" (loss of oil pressure at the hub), the prop still produces "acceptable" thrust. During my aerobatic days, a friend of my had a prop pitch set too low, lost the gov and could not make it back to the airport. So even if you set the prop gov for lets say 2800 RPM, you will never get it during a static run, since the prop is as flat as it can be. You will however get that 2800 RPM during dynamic or take off run!
Now if the prop gov RPM is set lower then that desired static RPM of minus 50-100, cranking up the prop gov RPM will make a difference during static run up.
Cycling the prop at 2000 RPM really does not test the "governing" part of the governor, since it is still sitting in a large under-speed condition. Yes the prop drops RPM, oil moves around but that is it. To test the gov you should bring the RPM with the throttle in the middle or lower part of RPM. So lets say 2300 RPM, now slowly back out the prop to 2250 RPM. The prop governor is now in control, you are in the constant speed range. Now you can adjust the throttle by few inches MP, up and down. The RPM should remain constant. Last thing in mind is to make sure you do not increase the MP beyond the recommended RPM/MP as stated in the POH. You can go over-square at these lower power settings, its actually desirable but that is another discussion.
So that's the technical part. Your "will it run" videos are fun and since the planes stay on the ground, no harm is done. This flying vid however increases the stakes, it places certain "responsibility" on you to do things "right". Lots of people are watching, mostly not pilots. As a 16,000 hr pilot, instructor and all that, this vid is not sending the right massage. You are too casual about it all.....
omg what is the right "message" i dont kno how many hours hes got ......but hes "qualified" just like you(and me).
The engine baffle seal looks very short. It probably needs to be taller so that it doesn’t flop over towards the back. You don’t want to be short on cooling in Florida. Any air leaking past the seal has a significant effect on CHT’s.
I’m digging this channel… it’s like Hoovie’s Garage but with some seriously real consequences, but actually with much more mechanical skills to display.
Keep it up man and stay safe(ish)
Hoovie.....mentioned in the same breath here??? SACRILEGE!!!! Hoovie is a hack.
Another successful rescue! You're doing a great thing by saving these old planes. If you haven't already, get rid of the plastic wrap on the SCAT hoses on the engine!
Thanks so much, and yes, we still have lots of punch list items on this one :)
YES, a second video this week. I don't mind if you make a 5 min video everyday
Thanks so much!
I loved the 'feeding the plane' segment. Hilarious, and true! And tell your son he did a great job grabbin those Franklins!
What have I learned from this channel, and every airplane owner I have ever met?
I want to open an airplane parts store. 😆 🤣 😂
Genius!
I stumbled upon your videos when searching for plane restorations, and have loved watching almost ever newer video. Such good content man keep it up
Request: When you run into a problem which needs solving (e.g., the hose sticking out, and others) - if it's worth filming the problem it's definitely worth filming the solution...don't leave us hanging!
Roger that
Tuck it in - embarrassingly
Good chance the spinner was simply highly polished and then clear coated, clear coat is paint in the eyes of the FAA and is legal. If polished properly it will look like chrome and the clear coating will chip near edges as it ages.
WHAT COULD GO WRONG ??? SAFETY HARNESSES = Please, please do install proper safety harnesses for you and your passengers. I recall a video of a winter time engine out crash in the mountains. The right seat passenger and wife of pilot smashed against the instrument panel. The daughter in the back seat walked to get help. Just like your Sierra -- Seat belts only as the plane was old.
FAA -- Shoulder Harness Kits
A shoulder harness is your ticket to a long career in flying.
Without use of a shoulder harness, even a minor accident can cause a serious injury or death. Why take a chance? Flying is rewarding and fun. Keep flying as long as you can. If you follow two recommendations you can greatly improve your chances for a long flying career. These are:
If your airplane has shoulder harnesses, use them. If your airplane is not equipped with shoulder harnesses, have them installed as soon as possible
Love that You never give up and always getting it done whit the most entusiasm possible, keep on good work Buddy! Greetings from Sweden!
Had the exact same issue with a Commander 112A that I ferried from PA to Tampa. Had to move the governor up by a tooth and adjusted the prop stops. It was two weeks of high speed taxi and static run-up’s. All new in our case, but never properly set. Damn airplane almost killed me on takeoff from Smoketown PA. Lessons learned. Always do a full power static check when unsure.
I guess the cylinder compression's checked out so valves needing longer for better seating shouldn't be too much of a problem. Exercising the prop even when not needing to isn't a bad idea to make sure it's always fresh oil and not stagnant able to hold moisture in the hub. You made it that's the most important thing :)
I used to take the controls when flying a friend's 172 down in AZ. Sadly, he is passing away these days, but you've got me thinking i need to get my license and start flying. I really enjoyed it.
I owned a Sundowner (Sierra with fixed gear) once, 1971 model, with Lycoming )-360. I installed the JPI system and was always seeing an initial rise in the oil temps at takeoff and climb, and they would come down as I decreased the climb rate or leveled off. It turned out the baffling had some bad areas and was causing the majority of the issues. The baffling on the Sierra is particularly susceptible evidently to cause some overheating. You might want to look at it and make sure they are all in good shape. It is a fine airplane, with heavy undercarriage. It can take a lot of abuse.
Welcome to 2022 and Jimmy getting back in the sky! He even had himself a sweet landing! At the intended destination!!
good to see your mini me learning. He will have a great start
Great video, thanks for uploading more, keep up the great work!!!
Thank you And your Son for an excellent video again.
I usually watch then several times each, the way you put it over is exactly how it happens.
James from Scotland.
Great to see your son helping you. These will be great memories for both of you.
Video in the middle of the week. Nice. 🇧🇷
Thank you for all your funny videos just brilliant ... I wish you and your family a happy new year, stay healthy and happy ! 😀
Thanks so much!
Hey Jim! Don’t throw the spinner away! There’s a hugh market out there where people turn these items into furniture. Id love to do that. They could use it to make a desklight or whatever. Saves you a few bucks for your plane!
As always, great vid and thank you!! Happy flights!!
You're doing a thing.
It's a thing in progress.
We shall all respect the thing.
Engine Oil Usage - I had a 79 Piper Archer 180 HP, cross country round trip Pennsylvania to California that did not use any oil, it had been a Corp owned plane, I had talked to the owner, they used straight aviation mineral oil in the engine for the 1st 50 hours before switching to an AD oil, the piston rings must have been nicely broken in…
Is that not normal practice anymore was when I first learnt to fly and had a summer job in FBO in 1980s
How magnificent that must be to have such confidence and skill and be able to cope with all the complexities that have to be watched while at the same time enjoying the experience. As a non pilot I'm full of admiration for this as I know I couldn't do it. You've got to have the right brain-wiring to cope with it all. My father's skills as a Pilot in WWII were not handed down to me :-(
Silas already sounds like a mechanic! "You having fun yet?....No!" Same answer in 30 years from now.😆
New sub here (fmr Pvt Pilot & A&P) and I must say you sir are channeling Ed O'Neill's Al Bundy as an aviator persona from another timeline. Props.. er, kudos 2U and your conscripted progeny! Looking forward to PLENTY more from this channel.
The effort that goes in to these videos is incredible
Another great job Jimmy. Keep up the good work buddy.
Yet another GREAT video...thanks Jimmy, and Minime. Please keep these vids coming.
Hi Jimmy! Nice lancair. Can wait to see how is going to looks when you finish with yours.
Oh nice, did one of these flights after an airplane was in maintenance for 5 months couple of weeks ago... nothing like saying "what the heck was that thump" while flying a few times!!!
The highlite of my day . I giggled ,I felt nervous for you .The whole gambit.
I love watching this channel it makes me feel really good about restoring cars and bikes😂