That power saw looks and sounds amazing I would love a beauty like that whoever wins that thing will be happy I’m happy just seeing that thing in action
I've had a 365xt for over a decade, I finally got around to doing the transfer/ 372 conversion and cut a couple gill slits the muffler. That sure added some snap!
Another great video with some good points Buckin! Love this saw for what it is. These saws work off of rpm not torque. These are still my favorite! Sounds great.
I do most of my firewood cutting at night. With all the crime in the area, it keeps the creeps out of the area. I go out for a bike ride during the day and most people avoid me!
Just bought one of these saws this morning from a seller up in BC. My first chainsaw and hoping to get a lot of good work out of it once it gets down to me in Arkansas.
Did you change the shut off switch? Common problem with this model is flooding because it is easy to have the switch off and keep cranking on it until it is flooded and then you realize that you need to put the switch onto the start mode. You can change the switch to one that when you release it, it will automatically return to the start position.
@@donnywalker4691 Buckin says it's got a pipe and a tickle job< well guys like me want to know exacting details. Where do I get one of thos pipes? What exactly did you do to tickle it? Ported?
BBR, as an occasional firewood cutter (might be clearing land for a cabin in the future) which would recommend between the 572 and 372? I had a 181 for years and it was a great saw especially after opening up the muffler and porting, but just too heavy for me these days
Buckin, how many tanks of fuel do you go through before you either touch up your chain or swap it all together? I normally will swap it when I notice it’s not pulling through the wood anymore or if I hit 5 tanks of fuel. Whichever comes first
Yes Donny should be able to sort a saw for you check out walkerssawshop.com you can contact the shop from there or you can try ask Donny himself on his most recent video here on RUclips channel name is Donny Walker ✌️❤️🌲🪵🪓🐝
Buckin be careful what you say about just going over and connecting with people you like because if I'm not mistaken you have had some issues with people just showing up to your home trying to connect. Some people just don't know that there is a difference between connecting on RUclips and connecting in reality.
I’ve seen and learned a lot from your file videos my only question is do you fallow the factory angle or do you change it some I keep trying to move it around but I’m only out one day a week so it’s hard to really say what’s better with a week in between
Hey Dr! It's a great saw. I just got a used 372xp for such a good deal from a guy who enjoys working on saws. I have a 28" bar and ironhorse exhaust. What bar do you run?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I can't be cutting firewood everyday!But I can watch Buckin everyday!
Awesome
True about injuries. You baby them, they like it and never leave. As I am getting older living with pain becomes a real thing.
Now knowing the intro songs backstory makes it so much better! Who would have thought a random organ tune could be so good!
Right🕺
Just laid down some overtime money on a brand new Husky 372 XP . I sure enjoy learning from you!
You take care of yourself, ok? Good seeing you out there, no matter what. You never lie down as long as you can walk and talk.
I can't ride dirt bikes anymore, so my new love is the power saw. Keep doing what you're doing Buckin, don't be good be great.
done ,,, good man
We're working our way through 120 cord of hardwood using just a stock 372XP X-Torq, blocking 12, 14 and16" lengths. Works flawlessly.
Dang, that 372 goes through logs like a hot knife through butter... 🙂 Kindness is Everything. From NC.
NC here as well
NC x three fellas east coast man can run saws just fine
Great video as always. Sound of that saw is sweet music too me ❤
That power saw looks and sounds amazing I would love a beauty like that whoever wins that thing will be happy
I’m happy just seeing that thing in action
I was just felling some walnut with my 372xp this evening. Stock saw with 32" bar and full chisel, skip tooth chain. Its a solid saw!
It just keeps getting better 😊
Big smile on my face, as usual 😊❤
Thank you for keeping the light shining ✨
G'day Helga, how's it going over there?
@@ishure8849 doing good, Ish, hope you are too 😊❤️
Waiting for the sun to come back... 🌞😎
My absolute favorite saw. Love the sound of sheer power. You are gonna need some dip with those chips . That chain cuts flawlessly as usual.
I've had a 365xt for over a decade, I finally got around to doing the transfer/ 372 conversion and cut a couple gill slits the muffler. That sure added some snap!
Another great video with some good points Buckin! Love this saw for what it is. These saws work off of rpm not torque. These are still my favorite! Sounds great.
I do most of my firewood cutting at night. With all the crime in the area, it keeps the creeps out of the area. I go out for a bike ride during the day and most people avoid me!
I like it!! I don’t have much crime in my neighbourhood, but maybe a little preventative measure wouldn’t hurt. 😂
Great Saw, good Job Donny.
Thanks for sharing!
Saw sounds good. Nice pop in the idle. Donny always seems to put a nice touch on a cylinder.
It does! . Their recipe is world renowned. And nothing crazy actually
I have 3 372. My favorite saws
The gentlemans saw.perfect way to describe it
Just bought one of these saws this morning from a seller up in BC. My first chainsaw and hoping to get a lot of good work out of it once it gets down to me in Arkansas.
good stuff
Saw is very impressive to watch an seemed to be very well balanced in your hands as well . Donny does a great job to boost them up a bit !
Absolutely
Glad to see you pullin' em' over with "Leftie, the Farmhand!"
Love you all...❤❤❤
Dr/Lt. Bradley
CUTS LIKE BUTTER MAN!!!
Much love Buckin!!🪵❤️
Another soldier of kindness going to be well equipped ❤
Holly molly macarony...this Machine is glorious😍🤘 great job Mr. Walker
She sounds like a ripper now ! Great work Donny Walker 💪🏿
Did you change the shut off switch? Common problem with this model is flooding because it is easy to have the switch off and keep cranking on it until it is flooded and then you realize that you need to put the switch onto the start mode. You can change the switch to one that when you release it, it will automatically return to the start position.
Well I’d like to do that. Is it a replacement switch from husqy or an aftermarket bit?
Nice work. Keep up the great content 🤙🏼
I wish my 044 cut like that haha! Good job Donny Walker!!
Oh my oh my that would be a glorious saw to own!! She cuts eh!!! Love it!!!❤❤
That pipe looks amazing!
When Donny Walker puts his name on a saw you know it is the best it can be. Great job Donny 👍👍👍
Thank you🪵👍
@@donnywalker4691the channel wouldn't be the same without you, Donny 😊❤
@@donnywalker4691 Buckin says it's got a pipe and a tickle job< well guys like me want to know exacting details. Where do I get one of thos pipes? What exactly did you do to tickle it? Ported?
Wow that baby woke up and is alive and ripping and sounds oh so good!
Running good Buckin sweet saw
Not bad hey ☝️
I’m a stihl man due to always having to repair my buddies husqy, but billy Id definitely run that saw 👊🏻.
It is a rip snorting cracking ported fire breathing husky machine 🔥
That’s a gentleman saw right there, boy
That 372 is wicked buckin, you running round file or square ground
Love Husqvarna.
BBR, as an occasional firewood cutter (might be clearing land for a cabin in the future) which would recommend between the 572 and 372? I had a 181 for years and it was a great saw especially after opening up the muffler and porting, but just too heavy for me these days
I really enjoy your vids!
Stand up and buck
Ahwoooo 👍
Great video bud see ya soon love ya
Glad to see you’re getting healthier. When able…Rehab, Rehab, Rehab. Stay safe and enjoy Nova Scotia.
Nice saw. Great video
Thanks 👍
That's damn gone saw. I'd sure love to have it
Sounds awesome
Hey Buckin been a fan for years and thinking of becoming a tree surgeon in the UK. Any advice would be greatly appreciated. Big love for your channel
Love the pipe
Look really cool
Sounds amazing. It seems like the idle rpm is lower it sounds almost like an old 070. Is that because of what was done to the saw?
I would love to own that saw
Nice powersaw !
Wow! You’re coming to Nova Scotia?? That’s where I’m from would be a honour to let you run my 372 with a custom muffler or one of my mcculloch saws!!
be my honor
@@BuckinBillyRaySmith what part of Nova Scotia and when I’d love to meet you
Is there a link to this muffler and anything else that was added? The saw sounds and looks great.
No sir .
Buckin, how many tanks of fuel do you go through before you either touch up your chain or swap it all together? I normally will swap it when I notice it’s not pulling through the wood anymore or if I hit 5 tanks of fuel. Whichever comes first
That saw would look real nice in my hands
Perfect size saw for me!
Hihihihi
Hello from Finland, hey what was the trick with shutdown? Your chain was sharp!
Question Billy Ray.... Would Donny Walker send me a 572 like that to Kentucky? Does he do that?
Yes Donny should be able to sort a saw for you check out walkerssawshop.com you can contact the shop from there or you can try ask Donny himself on his most recent video here on RUclips channel name is
Donny Walker
✌️❤️🌲🪵🪓🐝
BE KIND
Hey Buckin, can we see some cutting with a McCullough 610? If you have one.
we don't want to see a McCulloch
@@Mike-x9h5f I was talking about me and my friends.
I was talking about my friends
It's a ripper!
Yee haa that thing cuts nice
Clip. Clip, down comes that Acer.
Buckin be careful what you say about just going over and connecting with people you like because if I'm not mistaken you have had some issues with people just showing up to your home trying to connect. Some people just don't know that there is a difference between connecting on RUclips and connecting in reality.
Hey buckin..... does it seam alil lazy off idle or does it seam to have the crack?.... she seams like an amazing saw. Sounds good.
She definitely cuts ay
It was be for the mods
The saw came alive during the video. It had no crack at the start but plenty of pull. By the last cuts the crack had appeared
how can that be a cold start at the beginning? I can't see any smoke at all.
Buckin did some splitting after morning body assessment
Good man
@@BuckinBillyRaySmith I’m moving forward as much as i can
I’ve seen and learned a lot from your file videos my only question is do you fallow the factory angle or do you change it some I keep trying to move it around but I’m only out one day a week so it’s hard to really say what’s better with a week in between
Within the limits brother
32 or 36in bar please ? I'm 5; 10in. tall. not sure what length I need ... after 3 hours of bent over cutting... back pain really sinks in
I'm 5'7" use a 28" bar predominantly. 32" should do you very well, if you stand up and buck!😊 I hope I helped you decide.
@@EricChmelarsky cool thanks very much I'll order a 32in
I like a 36”
I'm 5'9" and a 32" works well for me.
@@derek1843 awesome thanks very much I'm definitely going to invest in a 32 👍
I am from N.S. , I am a p.c.t. 👍
How much would 2 mufflers cost 435,450
What pipe? I want one as I also have the same saw!!
Hey Dr! It's a great saw. I just got a used 372xp for such a good deal from a guy who enjoys working on saws. I have a 28" bar and ironhorse exhaust. What bar do you run?
I have a husky 440 i would like to make it a little better
Billy I like you'r Way
I want it soo bad. I need a saw that goes with my 550XP.
Good morning, I would like if you could put a translation in Greek as well... thank you..
ALL I CAN SAY IT SINGS
looks better than 500i
Please i need it neighborhood hears loud saws iv got tree's at my house qout booked
playing corn hole
it's unbelievable loud with this muffler. So clearly not a worke saw for whole days.
she cuts
Bill Block Head .
Always wanted a 372, with this pipe, it's a skookum saw. Where can I get that pipe, is it commercially available?