How to Trick Your Washer into Filling with MORE Water

Поделиться
HTML-код
  • Опубликовано: 11 дек 2024

Комментарии • 1 тыс.

  • @blkjakk
    @blkjakk 3 года назад +570

    Nothing efficient about having to wash your clothes 2 times. BRING BACK THE OLD WASHERS

    • @iamadaughtroftheKing
      @iamadaughtroftheKing Год назад +18

      I'm right there with you!!!!

    • @rocknjames
      @rocknjames Год назад +2

      No thank you

    • @infotoknow9486
      @infotoknow9486 Год назад +1

      So true! For the past few years I've had a old agitator washer which didn't hell of a job but then it died. The washer that the apartment complex just gave me the water never gets hot and the water in the rinse is never clear and the clothes are in there for over an hour.

    • @blkjakk
      @blkjakk Год назад +21

      @@infotoknow9486 put your clothes in the washer and then dump a few pitchers of water evenly all over them to trick the washing machine into thinking that it has a bigger load so it needs more water. That's what I have to do every time.

    • @JDoe-hb7pc
      @JDoe-hb7pc Год назад +12

      The hack is to open the top part that gives you access to all the wires, The cover snaps off. Inside on a samsung you will find a blue Cap the diameter of a Tide laundry detergent, these totalitarians put the cap there so you do not have access to a plastic screw it uses a Phillips "X" cross. I took the cap off with a drill and drilled a hole in it for easier access. This screw is the one that you turn to give you more water. It's one of those things that you're going to have to play with it to determine how much water you want but these totalitarian companies decide they don't want the peasants using water. My machine now washes dirt out of jeans perfectly. You can't wash without water. I recommend everyone does this real hack.

  • @violetaoropeza7941
    @violetaoropeza7941 4 года назад +561

    They should change the name to inefficient!!!! I ABSOLUTELY HATE the newer models!

    • @nynphose
      @nynphose 3 года назад +37

      they are absolute garbage and hardly agitate the clothes at all, it's all about them trying to force people into using less water and thinking we are getting the same cleaning.

    • @languagelearningdabbler
      @languagelearningdabbler 3 года назад +42

      I’m convinced that whoever designed these doesn’t do their own laundry 😑

    • @aaa7189
      @aaa7189 3 года назад +5

      @@languagelearningdabbler Our washer won't spin to empty. My wife went to watch her mother at her sisters house. She asked if she could do some wash. My wife came home and said it took 50 minutes to do a load and you need to add a lot of water.

    • @languagelearningdabbler
      @languagelearningdabbler 3 года назад +25

      @@aaa7189 Unreal. 🤦🏾‍♀️ My new washer has more capacity than my old one but it’s not even beneficial because of the water level 😩

    • @stoner2439
      @stoner2439 3 года назад +29

      Well as long as people want to vote for Dems who want more green/smart devises, we are going to keep getting these crappy washers and other devises.

  • @BeckySue89
    @BeckySue89 2 года назад +121

    I had my husband attach a hose and I add as much water as I like. Also the clothes are FINALLY getting clean! Hate those new "eco friendly" machines. You can't clean clothes with a gallon of water.🤦‍♀️

    • @flynneart1111
      @flynneart1111 6 месяцев назад +3

      Me too I'm a Hoser now

    • @danieljames129
      @danieljames129 5 месяцев назад +1

      Thanks I'm calling the plumber now to install an accessory hose

    • @Zonniezonnie_A
      @Zonniezonnie_A 24 дня назад +1

      @@danieljames129if you didn’t do it already, save your money and go pick up an attachment at the hardware store to attach a hose to a sink. Take the picture of your sink beside the washers spout (I think that’s the name of it) where the water comes out of and show the person working and get a quick release one so you don’t have to screw it in and unscrew it all the time.

  • @BKDDY
    @BKDDY 2 года назад +349

    I miss when washers just let you select how much water to put in

    • @erossinema8797
      @erossinema8797 Год назад +5

      Not only that, they would let you select how much time to wash the clothes

    • @Fraederichs
      @Fraederichs Год назад +13

      Thanks government

    • @sara-mc3rk
      @sara-mc3rk Год назад

      what do you mean? no one is forcing anyone to buy high efficiency. you can still buy the washers you all are saying you miss.@@Fraederichs

    • @mamag3531
      @mamag3531 Год назад +12

      I miss when they actually CLEANED the clothes. My husband works construction. My Maytag Bravos MCT is a joke.

    • @sweetshelby68
      @sweetshelby68 Год назад +6

      I am so glad it’s not just me! When they first came out I got one and I know the sales people thought I was nuts but I came back in few days and said I want a new “old style” washer! My husband also does construction. Even HE can tell the difference! It also takes such a long time with cycles compared to the older ones. I didn’t want another inefficient (ie) but staying with mother in law while looking for another house. She has one and also a dishwasher that takes HOURS!
      I just don’t see any efficiency, it’s ridiculous!
      Does anyone else have problem with the washer being off balance at rinse cycle? I have to stand here and watch because it will start filling back up with water and adding more time 😭.

  • @stevee4257
    @stevee4257 4 года назад +391

    How to trick your washer into filling with more water:
    1. Toss your HE washer into the trash
    2. Get an old style washing machine like Speed Queen

    • @dharma__3
      @dharma__3 4 года назад +5

      Great tip (but what about the low flush toilets)?

    • @dorothyfoster6050
      @dorothyfoster6050 4 года назад +13

      I absolutely hate the LG Direct Drive top loader machine... does not clean the clothes at all and NO WATER

    • @deecee7157
      @deecee7157 4 года назад +28

      I 100% agree with you
      I wish i would have never gotten rid of my fashion maytag washer (no bells and whistles). And ohhhhh, did it work perfectly. It only had three water cycles and four laundry type selection.
      But nooooo, I had to have the latest and greatest. And look where it got me, a washing machine that will only fill with with 2 cups of water (unless i trick it). Give me a break! 1100.00 totally wasted.

    • @joanturri5500
      @joanturri5500 3 года назад +2

      Exactly

    • @corin164
      @corin164 3 года назад +4

      I agree whole heartedly, I bought a stacking GE washing machine from Loews not knowing about the "efficiency" BS with the washer. It wasn't 'til I had my first load that I realized that there was a problem. I went back to the store and the Sales Rep acknowledged that many buyers also complained about the lack of water. He recommended that I place my load setting to "Heavy" regardless of the amount of clothing. This works to a certain extent but now I us more water than necessary. Now I place harmless (foam balls) in the tub with each load to minimize some water waste which occurs. My only drawback to this solution is that I have to minimize the use of warm and/or hot water since this would contribute to higher energy bills.

  • @Pipsterz
    @Pipsterz 2 года назад +111

    _#1 - Try dunking your items in water (first) before adding to machine. #2 - Once soaked items are placed inside take 1 gallon of water (an empty milk jug) and slowly pour over the arranged items. If you pour too fast apparently the sensor somehow knows it's water and starts the spin cycle, but slowly doesn't. _*_It's absurd we're have to try all this! Give me an older machine any day!!_** *** UPDATE: After following the tips I'd reposted, I honestly can't tell the difference :(

    • @audreymuzingo933
      @audreymuzingo933 Год назад +8

      Could just put the lid on the milk jug and sit it in the clothes, then take it out when the machine is done filling.

    • @TT-gz2mj
      @TT-gz2mj Год назад +24

      What a waste of time..which is the point of technology is to save time? Ugh...

    • @audreymuzingo933
      @audreymuzingo933 Год назад +7

      @@TT-gz2mj What they described would only be an extra few minutes. You must not have ever gone without a washing machine and had to hand-wash you clothes. I didn't have one for several months, nor a car to go to the laundromat, so it I had to wash in the bathtub. Once you have done that for a while and experienced the back ache, raisin fingers and clothes not even getting very clean, getting back the technology of a washing machine feels miraculous, even if you have to do a little tweaking at the start of each load.

    • @Pipsterz
      @Pipsterz Год назад +3

      It hasn't helped us one bit. Can't lie. Tried many times. Nada.

    • @audreymuzingo933
      @audreymuzingo933 Год назад +3

      @@Pipsterz But ...wait .... you're the OP! You're who made these recommendations, saying "easy fix" etc. !

  • @Mattjki
    @Mattjki 5 лет назад +252

    For best results thoroughly wash clothes before putting in stupid new machine.

    • @tryingtobarefruitinoldage9878
      @tryingtobarefruitinoldage9878 5 лет назад +7

      Like a dishwasher?

    • @xsarah791x
      @xsarah791x 4 года назад +4

      @@tryingtobarefruitinoldage9878 If it's a newer one, no. Same problem with lack of water lol

    • @moneyprepnow8410
      @moneyprepnow8410 4 года назад +11

      IKR! I hate the new style. My old 18 year old washer could run rings around this piece of junk machine.

    • @marrileemiles3974
      @marrileemiles3974 4 года назад +8

      I know. Don't they do test marketing any more? Don't they ask actually users what they want and what sucks about their machines.

    • @melissanicole4357
      @melissanicole4357 4 года назад +5

      Fr I’m gonna wet them before I put them in

  • @deem3204
    @deem3204 2 года назад +92

    Thanks for the tip. It was driving me crazy that my sheets weren’t getting completely wet and getting clean. 🙏🏽

  • @sirjohndoeofpa3292
    @sirjohndoeofpa3292 4 года назад +113

    I will notify my butler and house staff immediately. Thank You

  • @gracieperkins1182
    @gracieperkins1182 4 года назад +93

    My washer is installed right next to the deep sink. The deep sink faucet has a expandable hose, I put the clothes in the machine, take the hose and soak the clothes with water and then I turned the machine on.

    • @YagwitOG
      @YagwitOG 3 года назад +3

      I wish I had one of those

    • @justsayin7314
      @justsayin7314 3 года назад

      Nice!

    • @catherineadams3113
      @catherineadams3113 2 года назад +5

      Hate hate Maytag HE washer.

    • @twilatrejo
      @twilatrejo Год назад +4

      I use my sprayer as well, but u can only add so much, a couple of two liters of water 🤔 i might try that, i hateeeee!
      These stupid things

    • @flynneart1111
      @flynneart1111 6 месяцев назад +2

      Hosing now too hate these guys for giving us this crap

  • @oksills
    @oksills 5 лет назад +66

    There is a little problem for me, using this suggestion.. The machine only tinkles a tiny stream of water to fill in the first place. If I stand there waiting for the fill that I must then empty, and then restart the machine =---- 'Ill be there all day. I simple run a hose to the tube from the laundry sink or tote pitchers of water from the kitchen. Either way I feel like Laura Ingles Wilder toting water to do laundry!! The garden hose in the brand new machine looks crazy and makes me angry! What has the government EVER improved?? NOTHING!

    • @ccdenice
      @ccdenice 3 года назад +3

      Don't feel bad. My 80 year old mother had me buy a new washer & I made the mistake of getting one with a see-thru lid. She has bought a dual water hose adapter so she can run a 6ft water hose from the water faucet to the washer and STILL gripes they're not clean enough.
      I will put bricks in there if I knew it would make more water come out 🥴

    • @dreamweaver219
      @dreamweaver219 2 года назад +5

      Mine just drains any extra water.
      I tried adding a bucket full and it drained it all out.🤦‍♀️🤣😡🤬

    • @lornahuddleston1453
      @lornahuddleston1453 Год назад +3

      Laura Ingalls style rules! Tote that water!

    • @jerryspann8713
      @jerryspann8713 Год назад

      Oooooh but you sheeple love the government. You people will probably vote again for Trump because he says he'll give drug dealers the death penalty. As long as the government fucks with people you hate they're your best friend.

  • @sbrecke1507
    @sbrecke1507 3 года назад +85

    I just want to wash the clothes without a hassle 🤬

  • @ImDaBadGuy
    @ImDaBadGuy 4 года назад +172

    Shopping for a new washer in 2020 is freakin torture. I mean really. We now have to "trick" the machine so it uses enough water. I wish I had called that repair guy instead of buying a new one. I am going to buy a used one thats 10 years old before they got ruined. Why do we need a computer for a washing machine? They worked great for like 50 years. Do people really want a damn smartphone app for laundry? It's ridiculous. Rant over

    • @hisfirstlady79
      @hisfirstlady79 4 года назад +12

      Exactly!! I hate I just purchased this LG.... I’m so used to just loading, and not having to babysit each freakin load🤦🏾‍♀️

    • @ImDaBadGuy
      @ImDaBadGuy 4 года назад +4

      @@hisfirstlady79 I feel your pain. I was thinking of getting a lawnchair or something for babysitting the damn thing!

    • @pgc476
      @pgc476 4 года назад

      May I ask you what kind of machine you purchased? I am struggling with washing machine now. They are all stupid HE machine.m

    • @ImDaBadGuy
      @ImDaBadGuy 4 года назад

      @@pgc476 ge gtw335asn1. It is HE tho they all are. It sucks and the only redeeming factor is it uses a half decent amount of water but still sucks

    • @moneyprepnow8410
      @moneyprepnow8410 4 года назад +2

      I have a brand new washer, but washing my cloths by hand to get them clean. Ugh!

  • @powelldiesel7422
    @powelldiesel7422 5 лет назад +392

    I add my bowling ball to every wash and the results are breathtaking.

    • @vipercab
      @vipercab 5 лет назад +17

      Lol... good one

    • @padah2k386
      @padah2k386 5 лет назад +7

      😂😂

    • @whybutwhy4137
      @whybutwhy4137 5 лет назад +8

      Lmao....

    • @whybutwhy4137
      @whybutwhy4137 5 лет назад +65

      I took your joke and actually made is work for me with some slight changes. I placed my full Softener bottles on opposite sides and it filled the washer all the way up. Once it was full i paused the cycle and took the bottles out.. it's working just fine now

    • @MrBassin05
      @MrBassin05 4 года назад +3

      Good idea!!

  • @flubyux2
    @flubyux2 2 года назад +39

    I’ve been using the Bedding cycle. It’s meant to fill up to a higher level in spite of the fluffiness vs light weight of comforters and such. All the other settings on my new lg top load don’t have enough water for the fabrics to freely agitate

    • @hpolpolsixe3670
      @hpolpolsixe3670 2 года назад +2

      That’s what I figured too. Upvote.

    • @gingerhysell9505
      @gingerhysell9505 Год назад +2

      I was doing the same thing w/ my LG. Now I just come back and pause it twice during the wash, and click *Water Plus* to get a bit more when the clothing isn't agitating correctly.

    • @infotoknow9486
      @infotoknow9486 Год назад +3

      I don't even think this Whirlpool washer that the apartment complex comes with even agitates It seems like it just turns it around in teeny little increments. The rinse water is very cloudy it never gets clear and my water never gets hot. These suck!

    • @erossinema8797
      @erossinema8797 Год назад +1

      The problem is these high efficiency washers don't rinse well. Many have no option for a second rinse, which is needed.

    • @apoloniadiego4190
      @apoloniadiego4190 Год назад

      I was thinking that too, on bedding it’s more water then power wash, is it okay to wash clothes on the bedding cycle?

  • @colleenshea2293
    @colleenshea2293 4 года назад +64

    I just discovered these comments - thankfully - because I was about to report the new washers in my rental as "broken". I washed a load of sheets and towels, noticing that there was hardly any water and no suds frothing occurring. The wash cycle was ridiculous as no washing really happened. The sheets did not look or smell clean and seemed just damp at the end of the spin. After reading these helpful comments I am in the loop with the new machine models which are reported as lousy. I will look for the bulk cycle next time to see if I can get more water in the machine. But really!!!!!!!!!! Life is not hard enough - now we can't clean our clothes ! New Technology is driving me crazy! Mandated by government legislation!

    • @rylans.5365
      @rylans.5365 2 года назад

      @fred murray are you using a high efficiency detergent?? Sounds like you and the other person aren’t.

  • @snowbunz
    @snowbunz Год назад +24

    I finally found a quick fix. Set your washer to "bulky" items. I am amazed this works! No more adding buckets of water to cover the clothes.

    • @josiekeys7669
      @josiekeys7669 Год назад +7

      Thanks..bulky cycle works
      Also also after tub fills, you can press and hold deep....under the rinse option and machine will add another gallon of water to the wash cycle

    • @Andrea-yq9oi
      @Andrea-yq9oi 7 месяцев назад +3

      Tried that. I had a quilt in the tub with one inch of water

    • @sandy7543
      @sandy7543 5 месяцев назад +1

      Ty. I'm going to try the bulky setting

    • @aowales3316
      @aowales3316 3 месяца назад +3

      Not true I set mine to DEEP & heavy & double roncé & still NOT EVEN SOAKING THE LOAD WHIRPOOL BRAND NEW IS A PIECE OF 💩💩💩

  • @LydiaCyan
    @LydiaCyan 5 лет назад +46

    I made the mistake of purchasing an expensive LG top loader. I have to make sure the clothes are wet when I put them in or add water to the clothes. I also have to use vinegar in the fabric softener compartment and select "fabric Softener" after washing I must make sure they smell clean before putting them in the dryer. I sometimes have to wash the clothes more than once even after doing all the hacks. As an added bonus the washer ties the clothes in knots. So basically it uses MORE water and electricity, takes more time, than my old low efficiency model.

    • @PinnacleSignworksInc
      @PinnacleSignworksInc 5 лет назад +8

      I started using vinegar too! It's ridiculous to have to stand there and babysit your washer...and mine come out all knotted up too!

    • @oksills
      @oksills 5 лет назад +2

      PRECISELY!!!!!!

    • @sandyc9379
      @sandyc9379 4 года назад +4

      The knots are unreal! Hate this thing

    • @anthonymartin2412
      @anthonymartin2412 4 года назад

      vinegar kill's the soap. Vinegar used in tub clean to remove soap resin.

    • @lexijones8019
      @lexijones8019 2 года назад +1

      1000000%

  • @boyerm23
    @boyerm23 3 года назад +13

    So I accidentally bought a Whirlpool HE machine about 5 years ago thru Home Depot, and decided that the heck, I'll give it a try. After having it about 3 months I contacted Whirlpool and told them it was a total piece of ____t, and I wanted to somehow exchange it for a 'real' washing machine. They said no. "No no no." I had also bought a 4-year warranty and it's now expired. Yay! Can't wait til this thing needs a repair. I won't put $1 into this crappy washer. So, a year ago I needed to buy my daughter a washer. I found her a new GE with an agitator that you could still set the water level on. She gets clean clothes, I get semi-clean clothes. Sick of it. Whirlpool should have helped me. Still could.

    • @languagelearningdabbler
      @languagelearningdabbler 3 года назад +2

      What GE did you get her? I’m ready to buy an old used one at this point 🤦🏾‍♀️

  • @oksills
    @oksills 5 лет назад +73

    If you want to take clean clothes out of your new top loading Maytag washer, just be sure you ONLY put clean clothe in !

  • @jonweis6751
    @jonweis6751 2 года назад +42

    If you use the bulky bedding option with stain booster it will fill up with water. I was frustrated with the machine because some of the clothes were dry after it completed the wash cycle until i discovered this tip. Hope it helps you all.

    • @joeselzer850
      @joeselzer850 2 года назад

      do not have a bulky setting i have only bedding i have a front wash it berly put any watter and i not sure if after it washes the clothing if i have to then set the machine to rinse and spin or if the machine will do it on it own huhuhu Samsung wacher i like the older wash for sure

    • @birgip.m.1236
      @birgip.m.1236 Год назад +5

      Bedding option on our bogus $3000 Samsung machines is a 90 minute cycle. I have other things to do besides babysit a machine. I bet Sam has sung his way to the bank! 🤪

    • @lornahuddleston1453
      @lornahuddleston1453 Год назад

      What's this? My machine has no option for Bulky Bedding. So it's adding water and soaking things..🤨

    • @mannm4215
      @mannm4215 Год назад +1

      Google how to recalibrate a GE washer. Or how to reset a GE washer.

  • @newkkl
    @newkkl 2 года назад +16

    Thank you for these tips! I started using the garden hose the soak everything in the laundry basket before adding it to the machine, and that absolutely helped with the water levels. I have both pre-soak and 2 rinses on, so the whole thing ends up using more water than if it was just a regular machine that worked normally. I also ordered "agitator balls" online -- with no agitator in the machine they are relying on the clothes tumbling around to get them clean and it isn't enough. I hope these help!

  • @loleezrodriguez659
    @loleezrodriguez659 3 года назад +24

    When I first bought my HE top load washing machine, I used to hate it. Got mad at it all the time. 🤣😂🤭
    My sister then told me her husband had added another hose to the wall, so she could fill it more.
    So ever since then, I add like a gallon and a half once the clothes are in. Making sure that all the clothes soak up the extra water. Problem solved. 👏🏼😁🤭

  • @susanvermeza1
    @susanvermeza1 Год назад +2

    Yesterday, I had to double wash my load. Again. It's frustrating watching the machine agitate the load, when 50% of the load was ABOVE the water level. Nothing like wearing dirty fresh washed clothing. I was going to stick a brick in there during the fill process. . .then take it out after the clothing was wet. Reconsidered and thought I'd Google my question, instead. Glad I did. Don't know why I didn't think of putting the clothing in WET to begin with. So, from now on, that's what I'm going to do. Put them in, pour water on them to wet them down, then turn the machine on. That way, I can make sure they are ALL completely wet and heavier. Thanks for posting this!

  • @MrSmellGud
    @MrSmellGud 5 лет назад +73

    Who gives a s*** about Energy Efficiency if your clothes aren't getting clean. If I want more water then damnit I want more water. Simple as that! Just my 2 cents!!!

    • @JohnJohnCrusher
      @JohnJohnCrusher 3 месяца назад +1

      Typical political "we know more about what's good for you that you do" bs.

  • @lynnhayes6706
    @lynnhayes6706 4 года назад +53

    Thank you. I agree on wasting water by draining but you just made me think that I can simply drench the clothes, before washing to add weight.

    • @ccdenice
      @ccdenice 3 года назад +3

      That's what I'm thinking

    • @cindyb8766
      @cindyb8766 3 года назад +4

      @@ccdenice me too! I have a fluffy dog bed that weighs nothing, so I will put it in wet.

    • @myamya1782
      @myamya1782 2 года назад +1

      Good idea

    • @darlenebrown105
      @darlenebrown105 2 года назад +3

      Thanks! I am going to try wetting my clothes first.

    • @audreymuzingo933
      @audreymuzingo933 Год назад +6

      Exactly! I can't believe he's recommending this fill/drain thing that would just be a waste of water and time -heck I've got too much other stuff to do than listen for the moment the water is done filling in the laundry room! Just holding the basket of clothes under the shower head a few seconds would accomplish the same thing!

  • @jillgreider7922
    @jillgreider7922 4 года назад +16

    I have an LG Smart Drum. I turn it on the the bulky bedding cycle without clothing to fill it 1/3 with water, then pause and add clothes. Then continue on bulky bedding option to get more water. I am finally seeing clothes that float and move up and down. There is no need to feed outside water or wet clothes prior to starting.

  • @jdwspe
    @jdwspe 4 года назад +60

    Funny how consumers now have to trick their HE washer into being a Low Efficiency washer in order to get cloths clean. Dryers are the same: an HE dryer that need 3 cycles to get cloths completely dry.

  • @MarieAmicalola
    @MarieAmicalola 2 года назад +13

    It’s crazy we have to do all that but thanks for much for the tip. I just got my new washer and was very irritated.

  • @divineoracle4809
    @divineoracle4809 Год назад +10

    This is a great tip, whenever I do my sheets/blankets I put my GE on Bulky items with deep rinse. The deep fill is a sham, it adds maybe half a gallon extra. Whenever I have to do a load of big items I add 4-6 gallons of water from jugs after the unit finishes filling the little amount it does, that's the only way I've found to get everything wet. Time consuming and reminds me of how great we had it with old machines.

  • @lisab3134
    @lisab3134 Год назад +4

    Fantastic tip. I hated my brand new washer because even deep water setting filled less than half way! Clothes on top didnt even get wet, ugh! Thank you!!!

    • @dsoule4902
      @dsoule4902 10 месяцев назад

      Uh oh. Deep Water setting was supposed to appease guv but please consumers

  • @jbar_85
    @jbar_85 2 года назад +17

    I just tried my regular clothes on “Towel” mode on my front loader and it adds more water. I noticed that it puts more water in it. It definitely seems to be washer better.

  • @cherybrainerd4869
    @cherybrainerd4869 5 лет назад +26

    I like the conservation of water, but my HE top-loader does not even reach the top of my dog's bed when I put it in the water. It comes out as dirty as it went it. Thanks to the community for suggesting the fix to this one special load.

    • @oksills
      @oksills 5 лет назад +9

      My TOP level, deep water, bulky load, blanket setting allows only 1 1/2 inches of water! Imagine the great job that does. I have a 2 month old $900 machine that i have to fill with a hose from my laundry sink. It is infuriating.

  • @danlogan4149
    @danlogan4149 2 года назад +18

    Maybe somebody can come up with a way to add "permanent" weight to the thing by mounting a weight on it. Somebody should design something like that and sell it online. They would make a killing!

    • @amusedBYfools
      @amusedBYfools 6 месяцев назад +1

      Add rocks to your load. Wash them over and over. 😮

    • @stevesantiago9660
      @stevesantiago9660 5 месяцев назад

      Go to your local tire shop and buy about a pound or two of the wheel weights that glue on the rim. Stick them on the top of the basket equidistant so that it will spin evenly. Hopefully this will help you.

  • @matakaw4287
    @matakaw4287 5 лет назад +99

    I'd take a wringer washer over these pieces of junk any day.

    • @matakaw4287
      @matakaw4287 5 лет назад +6

      On mine I figured out that amongst the myriad of useless settings there is one that is labelled bulk items and it actually fills the thing full of water.

    • @b.gailcooper7530
      @b.gailcooper7530 2 года назад

      @@matakaw4287 Or xerself.

    • @bellaangel8373
      @bellaangel8373 2 года назад +1

      On same page, just saw your post after I finished a post, I mentioned going back to my grandmother's old ringer washer. I was 8 and now I'm 71. How time flys, but now it seems we're going backwards

    • @bellaangel8373
      @bellaangel8373 2 года назад

      @@matakaw4287 I used bulk on jeans but same outcome

  • @123Pazu
    @123Pazu 4 года назад +8

    I am using LG top loader and use bulky mode with full loads all the time and it works pretty well... water level almost goes up to the clothing level, and that's better than normal mode...

    • @jimmidan59
      @jimmidan59 2 года назад +2

      I tried the bulky cycle, but the spin cycle in bulky is slow, and the laundry comes out too wet.

  • @andrewd5135
    @andrewd5135 4 года назад +39

    I've been using the garden hose to fill the washing machine with water feel dumb but it works.

    • @truthhunter5195
      @truthhunter5195 4 года назад +1

      😂😪😂😪😂

    • @sunvolt333
      @sunvolt333 4 года назад +10

      Me too but i feel angry at whoever thought less water was a good idea. I waste much more water now!!

    • @garywilliams7734
      @garywilliams7734 3 года назад +5

      @@sunvolt333 that was an Obama era idea but in all fairness no one has changed it.

    • @jesussaves2246
      @jesussaves2246 3 года назад +2

      Can You Please explain how You do it?
      Is it while the machine is filling up with water?

    • @tomstaples7374
      @tomstaples7374 3 года назад +1

      Isn't technology great! (not)

  • @lbaldwin51
    @lbaldwin51 4 года назад +14

    I’ll try to add weight during the sensing and then remove it before washing starts. What I see is that clothes on the bottom get over rubbed and the ones on the top barely get wet. The spray rinse is a joke so I use the fabric softener option. If you care about clean clothes, babysitting the washer is required.

    • @cocoe4967
      @cocoe4967 4 года назад +6

      Yessss BABYSITTING IS WHAT I FEEL LIKE I'M DOING!!!!!!!

    • @AbigailAbi-Yah
      @AbigailAbi-Yah 4 года назад +4

      It IS BABY SITTING the washer , because I have to wait for the water to fill , then pause it , and add more water!!! I cant just relax , and let it go!

    • @marrileemiles3974
      @marrileemiles3974 4 года назад +2

      I'm not sure what you mean by "The spray rinse is a joke so I use the fabric softener option." Are you using it to add more water?

    • @lemurcat
      @lemurcat 2 года назад +1

      @@marrileemiles3974 I am also curious if that somehow helps?!

  • @marlenelapierre8207
    @marlenelapierre8207 2 года назад +46

    I put a 2 liter bottle of soda in the washer, and when it fills with water, I remove the liter. It works every time. It's a pain, but I got tired of having clothes come out of the washer not even wet.

  • @james4wd236
    @james4wd236 3 года назад +61

    I've resorted to filling a 5 gallon bucket and pouring it in the machine after it fills.

    • @zaino_zaggin8287
      @zaino_zaggin8287 3 года назад +15

      I fill up three 5 gallon buckets to do a full size laundry basket of laundry. Otherwise it fills it up with 1 inch of water and does the cycle with dry clothes on top.

    • @rebeccadockrey3663
      @rebeccadockrey3663 3 года назад +3

      That’s what I do too

    • @brightblonde3508
      @brightblonde3508 2 года назад +4

      Good idea for washing. But will the water level be too low for rinsing?

    • @brightblonde3508
      @brightblonde3508 Год назад +1

      @@frederick5652 adding buckets of water each time would become a nuisance

  • @KatrinaDancer
    @KatrinaDancer 2 года назад +15

    It's so ridiculous that we have to resort to this. I don't have children and I'm a vegetarian so I'm already using way less water than the average person. Damnit I should be able to use enough water to clean my clothes without having to resort to tricks.

    • @PsyTheDuck
      @PsyTheDuck 11 месяцев назад

      I know, right? They’re trying to convince us properly washing our clothes is really damaging the environment, meanwhile companies like GE or Samsung do 1000x more environmental damage in half a day than we will in our entire lives. I have solar power instead of traditional, I do rainwater collection to offset my water usage, I should be able to properly wash my damn clothes.

  • @kathypatrick7041
    @kathypatrick7041 3 года назад +7

    I have a GE with an agitator. I put it on super load, then let it fill the washer. It will add 8 inches of water (I measured). Then I pour a bucket of water on top. Problem is, if you want the clothes to rinse properly, you have to be there after the machine fills for the rinse cycle in order to add another bucket of water.

    • @kingdiamondgod5824
      @kingdiamondgod5824 Год назад

      I turn mine to 2 rinses and spins so I don't have to worry about that..

    • @kathypatrick7041
      @kathypatrick7041 Год назад

      @@kingdiamondgod5824, my washer doesn't have an option to set for 2 rinses, so I add one bucket of water to the wash cycle after it finishes filling, (leaving the lid open until the extra water is added), then I select speed wash after the first wash cycle is finished. I add another bucket of water, but no detergent, of course to the speed wash, which rinses all the detergent out of the clothes. Major hassle! I will replace this lame washing machine with a Speed Queen at some point because it will allow you to select the water level you want.

    • @kingdiamondgod5824
      @kingdiamondgod5824 Год назад +1

      @@kathypatrick7041 These new washes are horrible.. Sometimes it has 4 inches of water in it when I go to do laundry and sometimes it will just run speed wash.. Its crazy.. I was starting to wonder if my house was haunted.. 😂

  • @barryinn1778
    @barryinn1778 5 лет назад +25

    We bought the maytag bravo xl which will never buy again, I tried what you suggested and it worked. Machines without the agitator still does not clean the clothes. We are going to buy an old style washer with the agitator so our clothes get cleaned. That maytag bravos xl does not have the tall agitator so clothes do not move or rotate to wash they just sit there, in turn does not clean. Let me determine how much water I want to use, I pay the water bill.

    • @margaretsailsbury7861
      @margaretsailsbury7861 4 года назад +2

      I bought a new washer 4 years ago with an agitator. I am old school. Like the ones with the agitator. However, it doesn't put in enough water to suit me.

  • @0blivioniox864
    @0blivioniox864 2 года назад +6

    After much consideration, I've concluded that top-load HE washing machines SUCK for just this reason alone. Rather than listening to my input to "Deep fill" the f'ing basin with water, it instead thinks it is smarter than me by measuring the weight of my clothes in the method the guy in the video describes. In the mean time, I can HEAR the agitator BREAKING as it tries to agitate damp clothes with insufficient water.
    Another example of water saving products screwing things up.

  • @HobbyOrganist
    @HobbyOrganist 4 года назад +15

    This doesnt work with the newer Whirlpool topload, Ive tried wetting the clothes, putting it on "deep cycle" and everything else and if it senses water when it starts it turns on the drain pump. Ive even tried putting in a 5 gallon pail full of water on top of the load to add a lot more weight and it still doesnt change.
    In the end I wound up filling 4-5 five gallon buckets with water, one of them gets the detergent, start the machine and as soon as it starts filling with water I put it on "pause" and I dump in the buckets of water with the detergent one last and away it goes.
    Seems once it starts filling with water it no longer has a sensing cycle.
    I keep trying to think of a way to just gut the controls on the damn thing and replace them with the mechanical timer etc I took out of an older washer.

    • @b.gailcooper7530
      @b.gailcooper7530 2 года назад +1

      Yeah but now the lids lock so you can't open them. More and more controls....

    • @patriciatwohig8325
      @patriciatwohig8325 2 года назад

      I tried the same thing. and my results were the same.

  • @MichaelPYRoeder
    @MichaelPYRoeder 4 года назад +50

    Great tip. Or you can just run some of your clothes your going to wash under a faucet before tossing into the wash. That will make them heavier to start off with and you don't have to do the whole start/stop/start thing.

    • @NicoleShew
      @NicoleShew 2 года назад +4

      Great idea!!

    • @deb9806
      @deb9806 2 года назад +6

      I add a gallon of water from a water bottle every time

    • @deb9806
      @deb9806 2 года назад +2

      @Nad Sav I can’t find a regular washer. I wish you luck So many are the same complaints. Even the GE I just got

    • @b.gailcooper7530
      @b.gailcooper7530 2 года назад +6

      @@deb9806 Speed Queen Classic is an old school option. That, or Maytag Commercial model. They both use water to wash your clothes (I know, crazy idea....)

    • @deb9806
      @deb9806 2 года назад

      @@b.gailcooper7530 Thanks, but the SQ I saw said "Deep fill" for full tub but so many say that I didn't think it was any different.

  • @BigSplenda1885
    @BigSplenda1885 3 года назад +28

    Jesus there's gotta be a better way than this

  • @BrandonsHealthJourney
    @BrandonsHealthJourney 3 года назад +7

    My dad got a front load LG washer that nearly uses less water than a spray bottle and they won't let us return it. My clothes don't get clean and I have to run the washer at least 4 times. The machine doesn't even get rid of the detergent and I really don't want chemical detergents in our clothes leaching into our skin. I use ecos detergent but my parents don't.

  • @David-ml9nw
    @David-ml9nw 3 года назад +4

    I tend save water by wearing the same non-under garment clothing for at least two days. I don't really need to then have a shirt or pants that I've worn for several days to then not get fully washed/submerged.
    I'm afraid some models are susceptible to issues if you add water via a bucket. Having problems with washing machine now.

  • @406MontanaChad
    @406MontanaChad 4 года назад +33

    So we have to use even more water to wash our clothes then if we just filled it up in the first place.

    • @dhruvpatel6884
      @dhruvpatel6884 4 года назад

      Exactly! High efficiency bs nowadays smh 🤦

    • @dianavp9054
      @dianavp9054 4 года назад +2

      That's about right. Plus, what good is a HE machine if the clothes aren't cleaned and you need to run it through again? Not so efficient. I miss my not-smart 2006 Amana.

    • @ignaciofuentes2642
      @ignaciofuentes2642 3 года назад +2

      @@dianavp9054 Exactly. You end up washing clothes twice and using the second rinse cycle. Use to be able to wash all my bedding in two loads. Now it takes three loads because there is not enough water to wash it all. Makes no sense. It's not saving water or energy.

    • @dianavp9054
      @dianavp9054 3 года назад

      @@ignaciofuentes2642 It makes me think of "dry cleaning" -- How is it possible to add chemicals to dirty clothes and call them "clean"?
      Defies logic.

  • @AuLily1
    @AuLily1 4 года назад +7

    I select the bulky setting on my front loader. It's a higher water level. It just doesn't extract the water well in spin cycle but I remedy that by turning machine back on and selecting spin mode for added water extraction time.

    • @jesussaves2246
      @jesussaves2246 3 года назад +1

      Please explain Spin mode for added water? It's Spinning so how does it add more water.

    • @brightblonde3508
      @brightblonde3508 2 года назад +1

      I use bulky bedding and get more water but it tangles my clothes.

    • @irenelawson3636
      @irenelawson3636 Год назад

      @@jesussaves2246 It doesn't add water on the spin cycle. She means it extracts more water by doing a second spin. Hope this helps.

  • @PinnacleSignworksInc
    @PinnacleSignworksInc 5 лет назад +23

    I have an LG Wave Force washer. It not only doesn't add enough water and ties my clothes into knots, it goes into unbalance mode every time I wash sheets or a light blanket. I'm tired of babysitting this stupid washer!

  • @frankdunn1813
    @frankdunn1813 4 года назад +4

    Just soak a few articles of clothing prior to turning on the machine. You don't want to waste time and the water you've already used. Works for me.

  • @jennyperea3268
    @jennyperea3268 4 года назад +7

    Thank you so much!!!! This helped me understand my new washing machine! I was feeling disappointed but now it fills better!!! (Mine is a Frigidaire max fill)

  • @barbaraborg-jenkins3674
    @barbaraborg-jenkins3674 Год назад +3

    I load the washer and pour in a couple of pitchers of water to fool the washer into thinking it’s heavier. Works like a charm. That saying that, I will never buy one of these type washers again.

    • @DesertRat-ee9kt
      @DesertRat-ee9kt 11 месяцев назад

      I do the same thing. Good luck with not buying an HE machine. Water usage is set by DoE requirements. Biden and the Democrats as we speak are increasing the efficiency even more, i.e. use even less water. So get a bigger pitcher.

  • @michaelmace3893
    @michaelmace3893 2 года назад +3

    I'm giving this a shot now but I just went the clothes in my tub trying to save some water. This is insane. I'm about to buy a nice old used washer.

  • @KingRatt
    @KingRatt 5 лет назад +55

    So you are saying they are junk.

    • @vickig5012
      @vickig5012 5 лет назад +11

      KingRatt I have one and yes they are.

    • @pce-sz1gi
      @pce-sz1gi 5 лет назад

      KingRatt Well, my husband and I really like ours. I cannot understand why these folks seem to have such problems. It is very important to read the instruction book though. That is probably the problem. People can’t read anymore.

    • @gwoodle8398
      @gwoodle8398 4 года назад +8

      pce1148 that’s pretty condescending of you. Obviously you don’t care that your clothes are not clean, unless your washer is 20 years old, because ALL washers made today have water level sensors a requirement from the government.

    • @pce-sz1gi
      @pce-sz1gi 4 года назад

      gwoodle We bought our washer in August, 2019 and we still love it. Some folks don’t read instructions, my hubby is one of them.

    • @pce-sz1gi
      @pce-sz1gi 4 года назад

      James Muecke My husband and I still love ours and it works just great for us.

  • @eileenthomas856
    @eileenthomas856 4 года назад +15

    I've had for or five washing machines in my lifetime, I'm 68. I've had this Kenmore Top-Loading High Efficiency Low-Water Washer for three years. I can't wait to get rid of it. Not having the ability to control how my laundry is cleaned is a horrible design. I like to soak things. Not available on this model. Unbelievable!

    • @justlookin61
      @justlookin61 2 года назад

      I hate not being able to soak! My work around isn't exactly convenient, but the best we can do I guess.🤷‍♀️
      💚 1. Once the machine has filled and I give it a few few minutes to run normally.
      💚 2. I pause it and set my kitchen timer (or phone) to a minute or two before the machine's limit to being idle (for my machine that's 10 min)
      💚 3. When the timer goes off, I unpause for a little more swishing around (30 sec? 3min? whatever!)
      💚 4. Repeat as needed!!
      Of course, I have to be home/available to babysit my laundry! And either I plan my work around being in the kitchen to (next to the laundry room) to minimize the inconvenience of constant interruptions, or I chalk it up getting more steps on my pedometer running back and forth!😎🙄😝

    • @eileenthomas856
      @eileenthomas856 2 года назад

      @@justlookin61 Thank you!

  • @shirleyross6700
    @shirleyross6700 2 года назад +9

    I'm pretty sure you could fill a bucket with water and dump it in!
    Also for front load washers, you can pour more water into the detergent cup after the cycle has started- it drains right into the washer!

    • @sleepmore8587
      @sleepmore8587 Год назад +5

      Nope, I have tried this dumping a bucket in so many times in vain. My model drains it immediately.

    • @darwinatgc
      @darwinatgc Год назад

      No because they also lock the lid! Madening!

  • @marrileemiles3974
    @marrileemiles3974 4 года назад +6

    I've got one of those HE Maytag washers w/out the level selection knob. How can I get the water to fill with the lid open. I never know how much detergent to add until I get the clothes in there, I don't want to add detergent on top of dry clothes, therefore, I want to start the water running as I load the clothes. And sometimes I need to rinse my hands or the detergent cup or some other reason I need a little water -- like when the machine is filling up.

  • @southernberean8166
    @southernberean8166 4 года назад +34

    Don’t give the government any ideas, they will discontinue top loaders

  • @Lyndeejo88
    @Lyndeejo88 5 лет назад +65

    Once. you turn the washer off the stupid washer drains all the water .... People that do laundry need to create washers, not these scientists that think they know better ...ugh

    • @caseyoliver18
      @caseyoliver18 5 лет назад +6

      Lyndee Day oh hell I might as well wash my clothes in my dryer because you can't wash clothes in that piece of crap washer so why not wash your clothes in your dryer makes sense

    • @user-sr8mf2vg9p
      @user-sr8mf2vg9p 5 лет назад +3

      Lyndee Day not if you let the clothes absorb the water before turning back on.

    • @sharkhark
      @sharkhark 4 года назад +3

      @Michael Wayne my Maytag says deep water on one of its settings but barely adds more water than usual. Still at least 60 percent empty.

    • @genesmay6589
      @genesmay6589 4 года назад +2

      We get alot of power surges and outages...this is so annoying as a feature..

    • @Lyndeejo88
      @Lyndeejo88 4 года назад +2

      @Michael Wayne I use bedding, and deep fill only!

  • @user-sr8mf2vg9p
    @user-sr8mf2vg9p 5 лет назад +73

    I find this kinda funny and sad. Government wants to conserve water, but we all hate the new washers and are forcing more water 💦 into these crappy washing machines.

    • @chrisnonplussed423
      @chrisnonplussed423 4 года назад +3

      The government mandates so much water in your toilet tank and through your showerhead... with climate change we will have more water than ever... save us from our fastidious ways oh mighty poombas of government!

    • @cherylv6882
      @cherylv6882 4 года назад +10

      Kinda like flushing the toilet 2 or even 3 times

    • @southernberean8166
      @southernberean8166 4 года назад

      Wait they can tell you what you canning can’t say… Oops I forgot I’ve done that for the last two months

  • @reeneebeany7706
    @reeneebeany7706 6 лет назад +46

    I have 2 lb weights that I exercise with. I am considering using them to get the tub filled with water and then removing them.

    • @charleysturbos7320
      @charleysturbos7320 4 года назад +4

      You will most definitely forget one time and throw the thing out of balance or worse. Just put a tee splitter in the hot water and run it into fabric softener hole or through top.

    • @spiet7380
      @spiet7380 4 года назад +4

      Simply pour water on the clothes before you start the machine. Expirement with how much water weight you add for the amount of clothes being washed. Too much added water/weight can make the machine fill right up and then that wastes water and also wastes time waiting for it to fill itself to its maximum water level. Good luck!

    • @darcyo131
      @darcyo131 10 дней назад

      That's what I do! I put a 5lb weight on each side of tub on top of clothes before I start it. You just have to remember to stand there until it's done sensing to pause the machine and remove the weights. I've gotten distracted and walked away so many times lol

  • @Lv0nightmare
    @Lv0nightmare Год назад +2

    Got it, buy a Speed Queen old school washing machine with manual height selection, I will now shop for one

  • @Jason-uk4jf
    @Jason-uk4jf 4 года назад +10

    I’m glad I don’t have this problem. I am an appliance tech and I have a Maytag washer and dryer from the 1970s. Good old fashion simple machines that wash clothes and nothing else. I have collected a stock pile of parts for them over the years so I should be set for the rest of my life if I want to keep them that long.! Although I’m sure I will never own the crap they make these days. I see firsthand every day how poorly they perform. Super nice to know that I have a good old fashion set at home and do not have to put up with this nonsense. But I feel sorry for the ones that do!

    • @marrileemiles3974
      @marrileemiles3974 4 года назад +2

      .Jason: I've got the new top-load HE Maytag. It won't let me fill the machine with water while the lid is up. How do I hack it?

    • @Jason-uk4jf
      @Jason-uk4jf 4 года назад

      Hi Jackie is it the kind with the built-in water faucet?

    • @marrileemiles3974
      @marrileemiles3974 4 года назад

      @@Jason-uk4jf: No. No built-in water faucet. Model MVWC565FW2

    • @Jason-uk4jf
      @Jason-uk4jf 4 года назад +2

      Jackie Byrd The way I always make them run with the lid open is to take the lid latch off of the lid and just put it in the locking mechanism. There’s two torque screws that you take out and it comes right off.

    • @marrileemiles3974
      @marrileemiles3974 4 года назад

      @@Jason-uk4jf I understand and even have a torque wrench that might work. But, to make sure.... When I start a cycle/load the lid does not lock. Once I push the start button and water starts to flow I can lift the lid. It just stops the water flow. The lid doesn't actually lock until later in the cycle. You are sure that the water cut-off isn't in the hinge of the lid, right? That it is, in fact, sthe locking mechanism (on the front lip on this model). I did try to see if a plastic fork would fit into the opening on the lip but your idea sounds like a good, permanent solution.

  • @California_Nation_Laurent
    @California_Nation_Laurent 6 лет назад +19

    Great info. My only suggestion is that instead of filling the washer then draining it, which is a huge waste of water, fill the machine with the dry load, lets say towels, and I pour about 4 gallons of water over the dry clothes. A gallon of water weights about 8.3 pounds, so adding four gallons that's an additional 33 pounds of weight the machine will sense in the machine.

    • @catalina8677
      @catalina8677 4 года назад +4

      That's what I do too. Add extra water before it agitates. Cleans my clothes a LOT better. What a waste of time. I want my old washer back.

    • @catalina8677
      @catalina8677 4 года назад +1

      Laurent Jacquemin Someone told me to use the bulky sheets option. It works! Gills the washer all the way up! WTH? Did the screw up the switch? Why does it fill deep on the bulky sheets option but not on deep wash?

    • @marrileemiles3974
      @marrileemiles3974 4 года назад +1

      What about the "Deep Water Wash" doesn't that do the trick?

  • @optiman36
    @optiman36 4 года назад +22

    The sad thing is they still don't wash the clothes worth a crap even with the new water and under just won't grab a hold of do enough work to get dirty clothes clean. The new washers are absolutely terrible and I wish I had my old one back and would have spent $300 fixing my Maytag

    • @lexijones8019
      @lexijones8019 2 года назад +3

      So many of us agree

    • @dsoule4902
      @dsoule4902 10 месяцев назад

      You can find smaller portable (hook up to slop sink) washers that work the old fashioned way.

  • @HyperionKing
    @HyperionKing 3 года назад +10

    I just did my first wash for 2 bags of laundry and it put like 3 tablespoons of water

  • @jiggidyjam
    @jiggidyjam 4 года назад +7

    I add my laundry detergent,fab softener and sanitizer bottles to the clothes then remove after it fills then remove and I don’t waste water.

  • @KimberleyB
    @KimberleyB 2 года назад +3

    Thanks for posting the great details. Just got the Maytag MVW7232HW with its gigantic drum and built-in water faucet. That is so handy! I can wet down the fabrics with that in a short amount of time. The washer does have an extra high water level available with certain cycles, too. I'm still learning this new machine and am open to anyone's tips for the best performance. Before this, we had a Whirlpool Cabrio, forget which model.

  • @cherrytop9616
    @cherrytop9616 5 лет назад +27

    I just set mine for a bulky load and it'll fill up almost full.... I hate these things! I don't want the washer to tell me how much water I need!

    • @Mr252tone
      @Mr252tone 3 года назад

      Thanks this actually added a lot more water

    • @brightblonde3508
      @brightblonde3508 2 года назад

      Same here. I use bulky. It adds more water but tangles my clothes.

  • @meerkatsrock
    @meerkatsrock 3 года назад +4

    So frustrating. After spending $600+, my choices are either tote water across the house or buy a washboard and use the bathtub? I miss my old unit with the adjustable water level & agitator. When I wash ONE set of sheets, they come out with dry spots & fabric softener patches. Same with towels, etc. Thinking about having a repairman come out to see if they can somehow adjust/bypass the water level sensor or more of a one-time fix?

  • @anthonym7133
    @anthonym7133 4 года назад +2

    If your front loader has a clean washer cycle like the Kenmore I have, you can select that option and use a hose or a old detergent bottle to fill the machine to your liking. If won't throw a code like the other cycles have to dump excess water.

    • @jesussaves2246
      @jesussaves2246 3 года назад

      How do You use a detergent bottle to fill up machine can You Please explain

    • @anthonym7133
      @anthonym7133 3 года назад +1

      @@jesussaves2246 take a big empty detergent bottle, and fill it with water. Then pour it into the part where water fill the machine. Nowadays I just soak the clothes before I put them in the machine. Works great.

  • @AGirlNamedWinnie
    @AGirlNamedWinnie 2 года назад +9

    Just got a Maytag. I intentionally stayed away from the fancy models because I wanted to avoid expensive future repairs. This whole low water thing is so annoying!

    • @AGirlNamedWinnie
      @AGirlNamedWinnie 2 года назад

      Oh! And I can never get the timing right as to when to add fabric softener. There’s only a small window and the lid locks.

  • @y.rivera2828
    @y.rivera2828 4 года назад +3

    This video got the idea partially.
    Less waste: buy a hose splitter and install it in you laundry so you have your washer connected and then you connect a short hose. Put the clothes in the washer but DON'T hit any button. Then with the house, wet the clothes so now they have more weight. Then continue as usual.

  • @HiFlyer371
    @HiFlyer371 4 года назад +24

    Pour a gallon of water on top of your cloths before you start the maching.

    • @Indy2-hr2ct
      @Indy2-hr2ct 3 года назад +1

      Or. OR! Just add it yourself!!! ??? Why do all that??

    • @sadvntg
      @sadvntg 3 года назад +4

      @@Indy2-hr2ct isn't that what he jus said

    • @Noneyasauce
      @Noneyasauce 3 года назад

      @@sadvntg no he is saying to waste time by starting and draining the machine. Just dump water on. About 10/15 minutes faster and you're not wasting electricity on the machine just to drain..

  • @silvermist1216
    @silvermist1216 3 года назад +6

    I really hate the new and improved washers. A tablespoon of water is nothing ;and bring back the agitators.

  • @hittz8331
    @hittz8331 2 года назад +3

    Thanks Much Frank for your very informative video. I appreciate you much taking the time to share with us.

  • @toddh6234
    @toddh6234 Год назад +4

    I don't understand why manufacturers just don't put a button that you can hold down to add more water or add presets so that you can customize your own levels. I have one of these HE machines and it always under fills.

  • @genesmay6589
    @genesmay6589 4 года назад +12

    Just wet them before you load them ...why start it then drain it then restart??

    • @MaryR7256
      @MaryR7256 4 года назад

      waste of water and defeats purpose of HE

  • @Pusanliving
    @Pusanliving 4 года назад +8

    Try using the 'Presoak' cycle (along with the Bulky/Sheet cycle, Deep Water for Whirlpool Cabrio), this may be a way of tricking the washer into adding more weight to the load and subsequently adding more water during the wash cycle. (Note: I haven't tried 'Presoak' to see if more water is added to other wash cycles-yet.)

    • @myamya1782
      @myamya1782 2 года назад

      I will try this

    • @dreamweaver219
      @dreamweaver219 2 года назад +1

      No it won't, it'll know to account for the added weight

  • @nfn16076
    @nfn16076 Год назад +1

    Thank you. . I hate my new "commercial" washer, it was expensive, and it's stupidly complicated. Garbage! Maybe this hack will help deceive my new Big Brother Washer into really cleaning and rinsing my clothes.

  • @gamer8300
    @gamer8300 4 года назад +38

    That makes total sense but the fact that you have to do this to begin with makes them completely inefficient.

  • @karenkeller8341
    @karenkeller8341 3 года назад +24

    I refilled my empty water bottles and placed them in the bottom of my washing machine! Bingo!!

  • @conqwiztadore2213
    @conqwiztadore2213 Год назад +4

    Omg it thought I was the only one not being able to have my dirty laundry submerged in soapy water

  • @shersloan150
    @shersloan150 4 года назад +6

    How is it water efficient to have to wash the clothes three times just to get them wet...we have a brand new whirlpool top loader.

  • @emgeemka
    @emgeemka 2 года назад +2

    First of all: why don’t WE All complain to the manufacturers and whom ever is responsible for settings in those machines?!
    We all know this is ridiculous so why not demand to change it?!
    2. In Europe-
    front loaders get more water with every cycle,
    -the cycles are more efficient by having shortest times
    -and temperature settings are much better hot is actually hot!! 100C!!
    Which all of the above makes doing laundry really well money spent.
    Here in USA doing loundry is just f…ing waste of time and money.
    Let’s do something people!!!!
    People demand better solutions!!!! Samsung, LG, Maytag and more…

  • @charlesbarker2181
    @charlesbarker2181 5 лет назад +7

    My washer has a faucet on it I just take a cup and wet the load down before I turn it on. If you make the load to heavy it will fill all the way up and sometimes it's to much

    • @MaryR7256
      @MaryR7256 4 года назад +1

      what kind of washer do you have and do you still like it? I need a washing machine and need suggestions. Does your fill up to correct water level? thanks

  • @bernardjoseph5066
    @bernardjoseph5066 3 года назад +1

    Thanks man. I have a front load and thought the levels could be adjusted.

  • @abdelkaderelbachir3059
    @abdelkaderelbachir3059 5 лет назад +3

    Instead of wasting water you maybe can put something heavy inside and remove it before the cycle begins and for front door washers adjusting the water level on those is very easy you just need to remove the top cover and twist the weather level switch with a phillips screwdriver few turns I promised this won't do any harm to your washer I did that 4 years ago to my LG and it still works perfectly fine

    • @america1403
      @america1403 4 года назад +2

      weather level switch? Are u sure thats what its called? Can u provide more details, like which way do u turn it? and what top cover do u remove?

  • @gototcm
    @gototcm 2 года назад

    Good tip - thanks. And whatever you do, don't buy a front load washer due to numerous problems. And I agree with the previous comment from Stevee -buy a 15 year old top load washing machine with no rust with an agitator or a Speed Queen.

  • @Deklectic
    @Deklectic 3 года назад +7

    You could always just push the water plus button until you reach your desired amount of water... Atleast for an LG top load.. My LG uses more than enough water by its self but if I want an extra extra deep soak I just simply push the water plus like once or twice. On my particular model they were atleast smart enough to give me a water plus option and let me control the amount of water use one of the reasons I purchased that particular one because I know most HE machines now a days are extremely stingy on the water use..

    • @nortonralph
      @nortonralph 3 года назад +1

      My water plus button does not light up when I press it. Sigh..

    • @Deklectic
      @Deklectic 3 года назад +1

      @@nortonralph What cycle are you trying to use with the water plus? For me the bedding cycle doesn't let me do water plus because it usually fills the tub up like the old school washers most of us old enough are accustomed too. Maybe its the particular cycle your trying to use...
      Another thing with HE washers is 90% of new users including myself at one point use waaay to much soap.. Like the more excessive soap you use in an HE washer the dirtier your clothes WILL come out it has to do with the science of how laundry soap works and most people at first struggle to let that old school heavy handed habit go when doing laundry then they blame the washer when majority of the time its actually user error.. Like I've had to show half my family how to properly use an HE washer so their clothes get cleaned like they are supposed too.. In general most people use waaay to much soap but especially in an HE washer it doesn't get your clothes cleaner.
      Like if it says line 1 for a regular HE soiled load then fill it to line 1 not line 4 because you think its not enough that causes problems with the clothes and machine in the long term.

    • @nortonralph
      @nortonralph 3 года назад +1

      @@Deklectic I try it with all cycles to see which one it will light up with to no avail. I tried resetting with circuit breaker. Nada

    • @nortonralph
      @nortonralph 3 года назад +2

      @@Deklectic Fixed it. I reset it

  • @StageHammer
    @StageHammer Год назад

    The sensor cycle for Maytag top load washers start the sensor cycle every time the unit is paused. Think as if you've added clothes and it needs to re-sensor the weight, but it does the same 3 cycle fill, test, continuously filling as it does this. As it tops out, it will do two cycles and stop. I then moves into an agitation cycle prior to wash. If you continually stop the sensor cycle, pause until lid lock opens, then continue, you can fill the unit to the top if you wish. The subsequent rinse cycle fills to the same amount at least on my older unit. It take about 8-12 minute to fill my unit to 3/4 full with my water pressure.

  • @jamesflickinger1363
    @jamesflickinger1363 4 года назад +30

    I wish i could sue Maytag.

    • @sonnywolf383
      @sonnywolf383 4 года назад +5

      I'm in

    • @jewellloding3728
      @jewellloding3728 3 года назад +1

      I'm with you, I HATE my maytag washer. It malfunctions all the time.
      I'm always unplugging it and waiting 5 minutes for the computer to reset. It's a piece of crap.

    • @b.gailcooper7530
      @b.gailcooper7530 2 года назад

      Blame California's Goobermint. We all have to bow down to their regs.

  • @mdland9414
    @mdland9414 2 года назад +1

    Yes I figured out the water level issue by wetting the clothes first,, what drives me nuts is the Bravos XL will shut the fill portion and start agitating the clothes and for 10 min 1/ 2 the clothes are practically dry and just have the initial wetting while the machine is filling. So it will agitate the partially wet clothes, then decides that upp, there's not enough water in here so it starts adding more water 10 or 15 minutes into the wash cycle,. Then washes for another 5- 10 minutes and drains to start the rinse cycle,,
    Now besides for pre wetting the clothes I also use the extra rinse cycle cause I found the.soap isn't fully removed during it's "dry cleaning" wash cycle,, and the 1st rinse cycle is just a phase 2 of he wash cycle,, so the second rinse is the real rinse cycle,,

  • @catitude4
    @catitude4 3 года назад +8

    Or you can add water to the clothes to make them more heavy before you start the machine.

  • @marknye51.thefixitguy
    @marknye51.thefixitguy Год назад

    Awesome GREAT advice...thank you.
    Our new Samsung has a soil level dial but it doesn't put in enough water for loads of rugs

  • @tcar02d
    @tcar02d 5 лет назад +5

    Bull you can easily add a couple extra gallons into a front loader thru the soap drawer. Happy washing in the government washers.

  • @elitebowman5386
    @elitebowman5386 3 года назад +2

    Hi, I have a friend who has a GE model GTW335ASN1WW, the water won't fill on large load, past the low load. What could cause this machine to not fill to the large load? It has the agitator in this model. I told her to try the hot water cycle to see if that made a difference and it didn't. It is a new machine she bought in April. They wouldn't replace it at Lowe's where she bought it. Their Repair man came out and tried fixing it but couldn't figure it out. And he had owned his own Appliance Store for many years before joining Lowe's Repair team. Thank you for any suggestions.