Ich habe es nachgebaut sieht ja ganz einfach aus aber manchmal hat es einfach nicht funktioniert. Doch jetzt habe ich den Impeller sogar mit dem 3D Drucker ausgedruckt :)
Bcus with that second revolution he removed a piece of material on the "side" and on the "bottom" of the blade. Although I would first make a circular pattern and then the revolution to remove that material.
Theodyzee: he did the first time to check if the models are correct which are LoftSrf1, thickness, and revolution2. After he knew these layers need to rotate, we can applied for 18 copies.
what is the exact purpose of these type of videos? It goes so fast that it almost seems as if the designs are just used for sampling for actual projects rather than learning.
Those who can’t catch up on the speed, you can always change the playback speed in RUclips. The slowest is .25x. Otherwise you can always search tutorial on how to operate RUclips video then
If you don't like the music... FEEL FREE TO TURN IT OFF The idea that this is a legitimate complaint when you can CONTROL THE VOLUME OF YOUR SPEAKERS is beyond idiotic. FIRST WORLD PROBLEMS
Tell me something - where the hell does it say that this is a tutorial? Where the hell does it say that this is meant for beginners? Where the hell does it say that this is for people that have literally never used professional CAD software before? For some idiotic reason, every commenter on RUclips believes that :EVERY:SINGLE:CAD:VIDEO: should HOLD YOUR HAND through every single step of the process. If that's what you want, then you need to get a clue - these videos aren't meant for you, they're meant for people that actually know the basics of this program. If you have Inventor and don't know how to use it, you NEED to follow the BUILT IN TUTORIALS. If you've followed the built in tutorials, then there is NO REASON that you can't replicate this, pausing the video between each step as needed. This isn't some terribly advanced model; quite the contrary, basic tools - you know, the ones that the built in tutorials demonstrate how to use - are being used here. Again, if you don't know how to use the tools used in this video, then you need to follow or revisit the tutorials that come with Inventor. This idea that every single CAD video should be made for the lowest denominator of "users", or they shouldn't be uploaded at all is the epitome of utter ignorance. Especially when OTHER videos already exist that demonstrate how to use these basic tools. So, instead of crying because these videos are too difficult for you to follow, maybe you should consider looking up videos that are EXPLICITLY MEANT for someone of your knowledge/skill level instead of demanding that EVERY CAD video be dumbed down to the abilities of a toddler. Like you said above - USE YOUR BRAIN
![NLE Choppa - Or What ft. 41 (Orchestra Mix) [Official Music Video]](http://i.ytimg.com/vi/biOFASEgSOM/mqdefault.jpg)
Thank you for making this video. It is very educational for learning how to handle complex geometries.
And I thought I was good at inventor.. Well shit 😂
Muito incrível
Masterpiece of Impeller tutorial! Thank you for your video.
under 9 minutes? i bet it takes me an hour hahaha
Great video, will really help with my project.
Nice Job! You could really save a ton of time with the marking menu. (Right Click)
Very nice tutorial!!
Really good video. It was easy to follow along
Great design, good luck machining it...
It is also possible to 3D print (if he makes the fins thicker) and use the lost wax casting process.
Thank you for sharing! Learned a lot
Tech News #1321
Dosto kya aapne kabhi Smartphone ke sath aaye Box me User Guide Padha hai??
Baaki Comment me bata sakte hai..✌️
Good video. Yes its fast, but that's what 0.25x playback speed is for.
Nice video,thanks :)
very good tutorial! thanks!
Ich habe es nachgebaut sieht ja ganz einfach aus aber manchmal hat es einfach nicht funktioniert.
Doch jetzt habe ich den Impeller sogar mit dem 3D Drucker ausgedruckt :)
Nice
Good
I like it!
I made it. Thanks for your video.
very nice- thank you
SOMEBODY COULD TELL ME THE NAME OF THIS MUSIC AND WHERE DO I GET IT? THANKFUL.
dude use siri or google to recognise the song
Good work Start and I like the music to!! (look also to my technical animations made with Cinema 4D)
Good
like a boss
ruclips.net/video/_81dOSeNbuY/видео.html impeller design
It's hard for me. (Newbie on inventor) :(
good tutorial! [especialy the Music ;) ]
but could you explain why you've used the rotationtool twice and not in one single step?
thx!
JEZUS GOT SAND IN VAGINA?
simeon austin its actually a good question. I checked the comments just to see if this was answered.
Why is there still not an answer to this?
Bcus with that second revolution he removed a piece of material on the "side" and on the "bottom" of the blade. Although I would first make a circular pattern and then the revolution to remove that material.
Theodyzee: he did the first time to check if the models are correct which are LoftSrf1, thickness, and revolution2. After he knew these layers need to rotate, we can applied for 18 copies.
what is the exact purpose of these type of videos? It goes so fast that it almost seems as if the designs are just used for sampling for actual projects rather than learning.
i agreeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Exactly agrree ! Subject is good but content is not educative, many shortcuts, no explanation, very fast and result is zero :(
Those who can’t catch up on the speed, you can always change the playback speed in RUclips. The slowest is .25x. Otherwise you can always search tutorial on how to operate RUclips video then
It's not for beginners! The only shortcuts are the plane offset and the view half! :p
As for the speed you can always pause the video!
Music please
Like
Your tutorial worked up until the first fillet on the fan blades. Inventor says it's too complicated of a process to work.
James Mitchell Worked fine for me
Hay
Cool !陈独秀啊 666
Very fast, i was like saw moto GP championship
Just use Gear in bottom right coner of RUclips Player, set speed to 0.25
P.S. Switch off Sound :D
Michael Biri thanks bro
I am unable to do lofting although i followed the same steps as shown in video. Instead it is showing arrow marks. Anyone help me to work this out.
you have to make certain that the part is properly constraint in order to use the loft tool.
When you use loft yun need to pick 2 sections and 2 rails to make it work
yes offset
i think if you are going to post a video you should slow down some...thanks.
Alex Honeyghan : you can pause. I did it successfully.
1:20 lol steam
can I get this file fit a 3d print please. Thank you
drive.google.com/drive/u/1/folders/1wHo0tzg-qMG9LfE_sv3JTv6a9K6JiKLc
Can I scale this model down?
NO FUCKED UP BACKGROUND MUSIC ON A TUTORIAL ! do you know how disturbing this is ?
He is not talking. Use your brain and click on the mute button...
What do you think what I do ? turn the music Lauder , or turn the music of , or click the whole clip away , Now use your brain , what could it be ?
If you don't like the music...
FEEL FREE TO TURN IT OFF
The idea that this is a legitimate complaint when you can CONTROL THE VOLUME OF YOUR SPEAKERS is beyond idiotic.
FIRST
WORLD
PROBLEMS
Its not just to control the volume ! a Tutorial without talk and explain is worthless , the music is just Aggravating , of course I can turn off !
Tell me something - where the hell does it say that this is a tutorial?
Where the hell does it say that this is meant for beginners?
Where the hell does it say that this is for people that have literally never used professional CAD software before?
For some idiotic reason, every commenter on RUclips believes that :EVERY:SINGLE:CAD:VIDEO: should HOLD YOUR HAND through every single step of the process. If that's what you want, then you need to get a clue - these videos aren't meant for you, they're meant for people that actually know the basics of this program.
If you have Inventor and don't know how to use it, you NEED to follow the BUILT IN TUTORIALS.
If you've followed the built in tutorials, then there is NO REASON that you can't replicate this, pausing the video between each step as needed. This isn't some terribly advanced model; quite the contrary, basic tools - you know, the ones that the built in tutorials demonstrate how to use - are being used here. Again, if you don't know how to use the tools used in this video, then you need to follow or revisit the tutorials that come with Inventor.
This idea that every single CAD video should be made for the lowest denominator of "users", or they shouldn't be uploaded at all is the epitome of utter ignorance. Especially when OTHER videos already exist that demonstrate how to use these basic tools. So, instead of crying because these videos are too difficult for you to follow, maybe you should consider looking up videos that are EXPLICITLY MEANT for someone of your knowledge/skill level instead of demanding that EVERY CAD video be dumbed down to the abilities of a toddler.
Like you said above - USE YOUR BRAIN
you chose the most difficult path for this design
you lack a lot of pedagogy and technique
JEFF STONE: can you show the easier way?
Thank you for sharing! Learned a lot