How to: Remove the Bed on 1980 Toyota Pickup
HTML-код
- Опубликовано: 24 авг 2024
- Today I remove the bed from the 1980 Toyota Long Bed parts truck, as well as the transmission, and fuel lines. Next time I'll be cleaning the frame and getting it ready for paint. I'm using a homemade hoist with a harbor freight winch mounted at the top. It was a little sketchy, but I lived.
More videos of this 1980 project:
Rusty 1980 Toyota Pickup Truck Long Bed(s) Build Intro: • My Rusty 1980 Toyota P...
1980 Toyota Long Bed Rusty Cab Floors: • 1980 Toyota Long Bed R...
More rusty floor repair (shorter version) • How to Fix a Rusty Car...
Cutting & replacing rusty rocker panel: • How to Replace/Fix Roc...
Removing the Cab: • Disassemble & Remove C...
Removing the engine from bare frame: • Toyota 20R Engine Remo...
Toyota 20R Engine Teardown: • Toyota 20R Engine Tear...
Removing the Bed: • How to: Remove the Bed...
Prepare and Paint a Rusty Frame: • How to: Prepare and Pa...
Update Suspension to install Drop Spindles on 1979-83 Toyota Pickup: • How to: Update Suspens...
Installing Steering Components on Toyota Pickup 2WD/RWD: • How to Install All New...
Install Street Edge 3" Lowering Leaf Springs: • How to Install Street ...
How to install Mini C Notch: • How to Install Mini No...
Remove 20R from truck: • How To Remove 20R Engi...
My used OEM Toyota Parts for sale: yota.6thgeargar...
I don't have Patreon or ask for donations, but you can support the channel with some rad 'Yota gear from my store: 6thgeargarage.c...
Instagram: 6th_gear
6thGearGarage
Some other Toyota videos you may find helpful:
Remove 1980's Toyota Pickup/4Runner Dash Pad Cover: • How to: Remove 1980's ...
Rebuild Front Knuckles: • How to: Toyota 4x4 Sol...
Restore/Fix/Repair a Cracked Vinyl Dash: • Part 2: How to Restore...
Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
How to clean/Restore Toyota Pickup/4Runner Door Panels: • How to: Clean/Restore ...
Toyota Door Disassemble: • How To: Disassemble a ...
Rebuild front knuckle & replace birfield joint 80 Series: • Toyota Solid Front Axl...
Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
Toyota Pickup Fiberglass Bed Review/Comparison: • Toyota Pickup Truck Fi...
How to Properly Repair Rusty Frame: • How to Properly Repair...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
22r Compression Test: • How to: Compression Te...
Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
Remove Door Panel: • How to: Remove Toyota ...
LED Headlight Conversion: • How to: Install Toyota...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
B-Pillar Trim Removal & Install: • Toyota Pickup/4Runner ...
How to disassemble Vent Window: • How to: Disassemble Ve...
You sound like Chris Fix. Im enjoying your videos.
Your white bed maybe this lastest model 80. I owned an 81 SR5 4x4. It was white w/two toned stripes drk brown/light brown. That blue on yours was another option. Already sub'd/gave u a 👍. This is near & dear to me so looking forward to more videos!
Thanks! While the truck wasn't an SR5, it was highly optioned with AC and a 5 speed, so that night explain the modern style logo on the tailgate.
the reason for the different fonts on the tailgate is because Toyota used to ship trucks without beds to the US and they had the beds made in the US. The old style font is a Japanese made bed and the modern font is a USA made bed.
Thanks, that's exactly what I needed to know, and why I don't see many with the old style font. I'll try to save the blue tailgate then. I really like the Japanese style.
Today, I found out the R151F is a pretty old gearbox, not that I thought it was new by any means.
My Dad's 2010 70 series Land Cruiser has a R151F gearbox, definitely an old school gearbox and not very refined.
Also, the revs are a bit high in 5th gear on the highway.
The gearbox is not that desirable for Cruiser fans; we don't have a lot of these pickups still kicking around.
I think the one people want for Turbo diesel applications is the H151F or something like that.
I really enjoy this series. When a new video comes out, I watch it as soon as possible.
thumbnail : "DON'T TRY AT HOME" ... title : "How to: Remove the Bed on 1980 Toyota Pickup" ... lol !
Let me do the sketchy stuff while you guys watch :) I lived another day lol
Thanks for the update!
Your Logo on the 2 tailgates, if I had to guess, the white one is a more modern truck (newer), the blue one is the older style.
Both pick up trucks are CBU's (complete built units from JAPAN), the lip and the 2 latch tailgate is a easy give away! All Toyota pickup beds which do NOT have the outer lip were built here in the USA. And thus the cab and the frame were shipped to America and then the bed was installed at the Long Beach Port of entry.
Complety stoked on this build mate best of luck
how much does this body weigh?
Not understanding some of your procedure here. I'm 75, and last year tore two 2500 Rams completely down to the frames in order to convert my 01 Cummins 5 speed to 4WD, which requires a diesel or V10 4x4 frame. WHY DID YOU waste a lot of time and energy pulling the rear shaft when you could have don that AFTER you pulled the box?
I disconnected & pulled the 2-piece driveshaft first so it wouldn't be flopping around and dragging on the concrete as I'm rolling the frame around the garage.
another great vid from you my friend
I really need one of those 4x4 transfer case 4x4 light switch!!! By the way I have a R151F cost me $3000...kept blowing up G54s with 160hp from a LCE stage 2 22R stroker...Love the vids...If you didnt live in Ohio with all the salt...Id will you my 87'...really would like it to go to a good loving home....
Could just the door latch be from an earlier model I currently have to 78 Toyo Po up’s sitting in the driveway and they have that old logo font style with dual latch never seen single latch
Maybe it is, although I thought I read that the earlier models had the hinges closer together.
Just looked at the back of mine and looks just like the blue one both are long bed one is sr5 but the door looks identical. Since it’s an 80 I can see a late 80s door fitting it since the transition was done is 78
Get the bed upside down lay across saw horses
The tailgate logo was the difference between the long bed standard and the long bed deluxe models. Various other trim differences. Did the blue truck have round headlights or rectangular like the white truck?
I believe there are 3 tailgate variants, old logo with 2 latches, new logo with 2 latches and new logo with single latch.
I had a 79 long bed 5 speed with a 20r and it had the new logo with side latches and I currently have an 81 sr5 with a single latch and new logo. I believe the beds and tailgates are different depending on the latch styles.
That makes sense, since this was a higher trim level with AC and the optional 5 speed, although it was not an SR5. Both trucks have the round headlights. To my knowledge, the square ones were not used until 1982.
Yeah now that you mention it, I have never seen the old logo with the single handle on the tailgate.
🤘🏼
Cool project.
I took your advice and called the Stealership for bushings and bolts to put the cab on my chassis...only $188.65 for the 6 sets of bits....lol
Kinda gotta roll that around a lil. Are 4x4 bushings the same ya think?
I can do aftermarket poly for about $90...for a 4x4.
I can’t say for sure but I would think 4x4 cab and bed bushings would be the same as 2wd, since the cabs and beds were identical.
@@6thGearGarage I'm hoping so. I kinda wanted regular old rubber mounts, but I can get black poly ones, and its WAY cheaper.
I'll probably go that route.
@@danielkingery2894 I would too... what brand are you looking at buying?
@@6thGearGarage I haven't had time to pick anything out just yet.
I think they were off brand on Amazon that were the cheaper version.
Holy wow...I just reread the quote for the cab bolts and bushings...the $188 was JUST for the two bolts in the core support....😬