Built my first PC last week, upgrading from a prebuilt. Massive thanks to you and all your videos. Made it an absolute breeze! 4090 with a ryzen 7800x3d….its an absolute beast!
PC Centric! I finally built my first PC after YEARS of watching your channel. Thanks for all the advice and information. I would not have been as prepared without it. Lian Li Lancool 216, 32G GSkill Trident 6000, 7800X3D, Asus TUF 4070ti Super, 850w BeQuiet Dark Power 13 PSU, Asus ROG B650e-f Board, Deepcool Assassin IV, LG-C1 as display.
I did an all white build last July with a snow white Hyte Y60 and while I am biased, it is honestly fantastic. Intel 13900k with a Powercolor Spectral White 7900 XTX and MSI Z790 Edge WiFi. RGB makes a white build even more versatile for themes. Enjoy your new rig!
I am so Happy for you 😁 and thank you, I assemble my new rig according to your suggestions in last gaming system for Mar/Apr 24 mid range and I love it. Not all parts, since was unavailable for my country but most I got. ♥️♥️♥️
Why would that be crazy? Just pop out the 4090 and pop in the 5090 and build updated. It's not like he's gonna need a new mobo or anything else. At most he can update his CPU which is fine because he's on an AM5 board already and those are going to be the standard for a while to come.
I have this exact same case but in black! I love this build. I don’t need a white PC, but I think I want one anyway! Love this build except the GPU barely works as an accent piece. What would have been nice is sending it out for painting, if only just for the shroud/outer part. Maybe even giving the “metal” finish some copper and white accents even white digital camo vinyl would have worked nicely. Other than that it’s 100% really neat!
The side intake fans can be replaced with the same fans but reversed verion ones. Defenatly swap the GPU with the GIgabyte Aero. I'd add an extra reversed intake fan at the bottom just for looks. Finally, you should check out the Phanteks 5.5 inch IPS 1440p screen which does a good job at looking good inside the case as well as showing all your temps.
11:00: It would have been nice to see how you installed the two eight-pin CPU power cables on the MB. I then plug into the MB sockets before installing the MB in case. They are difficult to install after the MB has been installed because the MB heat sinks interfere with the insertion of the power cables. My Montech 95 King Pro makes cable management easy. Just above the PSU is a metal two-bay cage for SSDs. This cage is easy to remove and provides plenty of extra cable space.
Nice build Marcus! I want to build in that case too but the placement of the I/O and power button turned me off. I have the PC in my room corner with the side facing me so I went with the Y70 instead. Hope you enjoy it until the 15th gen and 5090 comes out 😂
My NZXT Motherboard had plastic on it too. I took the plastic off, saw there was a place for the thermal tape. right there, where they didn't put it, where they should have put it, because it's an insulator instead of cooling. I just removed it. Didn't get thermal tape because I don't use that much storage rewrite and deleting. But kind of aggravated because it's literally a spot for the thermal tape.
I picked up a cyberpowerpc from Costco because the display model instantly caught eye and it was this case (in black) which looked beautiful. Plus it was a i5 14400f, 4060 GPU, 32 GB DDR5, 2TB NVMe for $899.
You'll have to let us know how stability is long-term since that memory kit is technically XMP and pretty far above the support speeds for AM5. It's a great shame Corsair doesn't make a native EXPO kit in the white, I don't understand why we're still not making identical products for both Intel and AMD across the board. I would also suggest adjusting the angle on that 12VHPWR cable, perhaps in the final build, to ensure the bend isn't too aggressive that close to the connector. Love a white-themed build though.
if you go with cablemod cable kit, it might be cool to lean in a little bit to the black and white motif of the nzxt mobo by going with alternating black and white cable kit. Also, gotta swap the GPU for something white, or at minimum something mostly blacked out. the nvidia FE gunmetal really destroys the theme you have going.
Damn that's a beaut- And an interesting choice on the lighting! I'm used to either blackout or themed RGB builds, but cool white light is a new one.. Not a bad choice, though! I'll be excited to see the next bit!
As someone whos reached upgrade stage (once a decade ish, xbox) and looking at an xbox x if i was to go all out and buy this instead would it survive the same time frame,no additional spend? Would i be able to play 4k games at max 60fps for same time scale.if not how can i justify it if i have to spend 1500 on a gpu now if ill have to spend 2grand on one in 2 years time?i Created a giant game in unreal tried to import it to a "enviroment" i made n got 2 fps. Blender 1 dohnut with sprinkles 3 hour render per click or movement. On a 1k worth pc? Is this thing just for whales or what? Nice pc tho
i personally would love to have nv7, but its just too expensive. nv5 is a great choice, good looking case with some quality fans. Phanteks is crushing it.
I have a few questions I hope you could answer! 1) did you just need to plug the Lian li fans on the cooler straight into the hub or did it need to do anything different considering it’s on the cpu cooler. 2) did you plug in the cpu cooler is the CPU fan or AIO pump on motherboard because I have the same aio and cpu so I’m curious. 3) how are your temps so low, my cpu idles at 53°-63° then play rocket league at 64° but on apex and cod it shoots up to like 72°-85° then my pc gets quite loud. Sorry for so much but I’ve been stuck not being able to figure anything out
Great video! I think you should have used Phanteks D30 fans. They are absolutely gorgeous! Did the ram work? I have the exact same ram, and have been thinking about going from stable 14900K w/4090 FE to AMD w/5090.
I hate how much I love this case after building my son a beautiful new pc with it. I wanted it for myself but my heart belongs to a future build with the Thermaltake 300. This NV5 is a clean, easy, almost perfect build I can't recommend enough. This was probably the most satisfying build I've ever done.
Not the best choice for a case, but as long as you like it. The air flow will be turbulent and not as efficient as it could be. A simple smoke test will prove that.
QUICK Question... Which motherboard would be best paired with Ryzen 9 7950xd. That's the processor I currently own. I haven't opened it since I have no motherboard yet. @PCCentric can you recommend a board to choose in white. That NZXT one looks great.
I would go with either a mid end or top end b650e motherboard or a mid end or top end x670e motherboard. Now which one it all depends on your color scheme, how many ports you need, the vrm's etc. You will have to do research on youtube and online. I went with the same motherboard in this video with my 4090/ 7800x3d all white build in my profile picture.
rig is beautiful, wish the gpu matched the color scheme and wasn't the FE but its a 4090 so who wouldn't just go out of their way for this little demon.
Love watching your journey. The NZT motherboard is the perfect match to the case. Would be interested to hear if you would have considered an RX 7900 XTX in place of the 4090? It has the same 24gb VRAM for you video editing workloads and should provide great gaming performance as well. Plus it comes in all black editions which would have looked great ;) Interested to hear your view on going Team Red for your own use cases.
Hey PC Centric!! Quick question for you if you can answer. I was thinking about building a new rig with a 7800X3D as the cpu do you think I will need X670 mbo or do you think the B650 will be enough for the build. I'm asking this because i saw you used a B650E from NZXT for your CPU and it made me curious.
Use those small copper heatsinks the use on laptops and steam decks for your m.s they should fit under the white panels and if they peak out from underneath theyll match the ram sticks boom 💥
proud to say i’m watching this in celebration of finally saving up money for my first custom itx build! 4080 super, 7800x3d, and 32 gb ddr5 cl30 ram, and a whole lotta storage!
Look up reviews online. I am thinking of upgrading to either the b650 or the x670 white and silver motherboard. They look really nice and will definitely go with an all white theme. I currently have the motherboard in this video with my all white build.
I did my first build this year with just fans and an aio, so ain't any time soon that I'd build another pc, but I do wanna try a custom loop in the future even tho I don't need it
i was about to pull the trigger on everything in this video and then noticed that case only supports 1 USB-C .. isn't that odd? Shouldn't every PC have at least 3 USB-C ports???
What do you do with the old rig? i would like to build a new PC as mine is still a decent workhorse but its definitely reached its limits in terms of upgrades. Avoiding Facebook - would eBay be the best place to try and sell it?
Where is the best place to learn more about pc building because I'm a newbie and I really wanna build a decent one. Also understand what I'm doing and why.
RUclips. This channel and many others build pc's and go through the process. The videos are 1 hour to 5 hours explaining everything as they build the pc.
I had the Phanteks NV5 Case, but didnt think it was great for cooling, so upgraded to the Hyte y70 touch and the cooling is just better for the 14900k and 4090, cheers.
I've heard the Thermalright Peerless Assassin is supoosed to be a good air cooler, cheap too. Its probably what I'm gonna go for in my All White build.
Just upgraded to a 4070 ti Super! It's been an absolute beast so far. Upgraded from a 6700xt and have gained about double the performance. Even more in RT performance.
I got the same gpu, two months of use so far and I couldn’t be happier. I’m pushing 75MHz on the core and 800 MHz on the memory through msi afterburner.
@@lysergicaciddiethylamide6127 yeah it's been fantastic. Playing Jedi survivor in 4k high settings right now. Might check out cyberpunk path tracing after this
i cannot get my lian li lcd to power on..... everything else works, but for whatever reason i got no power to the cpu cooler...it's plugged into the psu and cpu fan on mobo ... idk what to do lol
I hope you react to us as wel, as i kinda want your advice😅 Im planning a build, did not do 1 in 20years but watched a lot of vids and am rather conviced i am able to manage. I am trying to build a 1440p am5 system, this does ensure me of being able to upgrade later on right? Am5 is the new standard and i would be able to upgrade that cpu in a year or 3 when there is more choice?
The 4090 is an obvious choice, but it really really screws the colour scheme of the rig. Which is a shame. Looking forward to you running the water lines. You gotta throw some copper accents in there if you can, I think it'd look great.
I 'am Building my PC soon and I was wondering, I have a 12900k I Bought Last Year. Or should I just go with the 14900k ? Heard the 14th gen was having Problem's...
Built my first PC last week, upgrading from a prebuilt. Massive thanks to you and all your videos. Made it an absolute breeze! 4090 with a ryzen 7800x3d….its an absolute beast!
There he is dollar bill
You upgraded to max 😂👏👏👏
Dude, same! I went all in with my first PC.
I have all future proof parts. Just waiting to see the 5080 and what it offers.
What kind of motherboard?
PC Centric! I finally built my first PC after YEARS of watching your channel. Thanks for all the advice and information. I would not have been as prepared without it.
Lian Li Lancool 216, 32G GSkill Trident 6000, 7800X3D, Asus TUF 4070ti Super, 850w BeQuiet Dark Power 13 PSU, Asus ROG B650e-f Board, Deepcool Assassin IV, LG-C1 as display.
Great case, glad you are happy!
What is the difference between the B650a and B650-a ? Im putting together extremely similar. How do you like it?
@@PcCentrica eunuchs psu 😂
I love how clean the front of the PC looks, with most of the cables hidden behind. Definitely keen to get something like that for my next PC.
I did an all white build last July with a snow white Hyte Y60 and while I am biased, it is honestly fantastic. Intel 13900k with a Powercolor Spectral White 7900 XTX and MSI Z790 Edge WiFi. RGB makes a white build even more versatile for themes. Enjoy your new rig!
I am so Happy for you 😁 and thank you, I assemble my new rig according to your suggestions in last gaming system for Mar/Apr 24 mid range and I love it. Not all parts, since was unavailable for my country but most I got. ♥️♥️♥️
Right before the 5090 is crazy
Think he wont buy 2-3 of them as soon as they come out?
@@Marrk001bold of you to assume he’ll buy them, sponsors will just give him some to review and he’s bound to be given at least one indefinitely
*5080
Why would that be crazy? Just pop out the 4090 and pop in the 5090 and build updated. It's not like he's gonna need a new mobo or anything else. At most he can update his CPU which is fine because he's on an AM5 board already and those are going to be the standard for a while to come.
When you get everything FREE its not really a personal build.
NOTE that the SHIFT1000x can supply up to 450w not full 600w to the GPU on 12VHPWR
only the SHIFT1200x can Supply up to 600w
I have this exact same case but in black! I love this build. I don’t need a white PC, but I think I want one anyway! Love this build except the GPU barely works as an accent piece. What would have been nice is sending it out for painting, if only just for the shroud/outer part. Maybe even giving the “metal” finish some copper and white accents even white digital camo vinyl would have worked nicely. Other than that it’s 100% really neat!
The side intake fans can be replaced with the same fans but reversed verion ones. Defenatly swap the GPU with the GIgabyte Aero. I'd add an extra reversed intake fan at the bottom just for looks. Finally, you should check out the Phanteks 5.5 inch IPS 1440p screen which does a good job at looking good inside the case as well as showing all your temps.
@2:57 "bear in mind this comes in for around about 85 pounds"
My American brain: "Man, that's a heavy case!" 🤣
Fr lol
Nice rig. They should include a panel to cover up that bottom fan location if you aren't placing one there.
11:00: It would have been nice to see how you installed the two eight-pin CPU power cables on the MB. I then plug into the MB sockets before installing the MB in case. They are difficult to install after the MB has been installed because the MB heat sinks interfere with the insertion of the power cables. My Montech 95 King Pro makes cable management easy. Just above the PSU is a metal two-bay cage for SSDs. This cage is easy to remove and provides plenty of extra cable space.
looks beautiful. can't wait to see it finished!
Nice build Marcus! I want to build in that case too but the placement of the I/O and power button turned me off. I have the PC in my room corner with the side facing me so I went with the Y70 instead. Hope you enjoy it until the 15th gen and 5090 comes out 😂
My NZXT Motherboard had plastic on it too. I took the plastic off, saw there was a place for the thermal tape. right there, where they didn't put it, where they should have put it, because it's an insulator instead of cooling. I just removed it. Didn't get thermal tape because I don't use that much storage rewrite and deleting. But kind of aggravated because it's literally a spot for the thermal tape.
i have the nv7 with 4080 & 12900k, best temps ive ever had! swett build!!
This looks great, I love how clean it looks. Can’t wait to see it with the water cooling!!
I picked up a cyberpowerpc from Costco because the display model instantly caught eye and it was this case (in black) which looked beautiful. Plus it was a i5 14400f, 4060 GPU, 32 GB DDR5, 2TB NVMe for $899.
You'll have to let us know how stability is long-term since that memory kit is technically XMP and pretty far above the support speeds for AM5. It's a great shame Corsair doesn't make a native EXPO kit in the white, I don't understand why we're still not making identical products for both Intel and AMD across the board.
I would also suggest adjusting the angle on that 12VHPWR cable, perhaps in the final build, to ensure the bend isn't too aggressive that close to the connector. Love a white-themed build though.
PCC is the type of guy to say “see you next year!” On New Year’s Eve.
if you go with cablemod cable kit, it might be cool to lean in a little bit to the black and white motif of the nzxt mobo by going with alternating black and white cable kit. Also, gotta swap the GPU for something white, or at minimum something mostly blacked out. the nvidia FE gunmetal really destroys the theme you have going.
Damn that's a beaut- And an interesting choice on the lighting! I'm used to either blackout or themed RGB builds, but cool white light is a new one.. Not a bad choice, though!
I'll be excited to see the next bit!
The whit build looks clean as f*.
May be changing my case to a nzxt h9 flow black. Fill it up with lian li infinitys.
Currently have a h5 flow.
As someone whos reached upgrade stage (once a decade ish, xbox) and looking at an xbox x if i was to go all out and buy this instead would it survive the same time frame,no additional spend? Would i be able to play 4k games at max 60fps for same time scale.if not how can i justify it if i have to spend 1500 on a gpu now if ill have to spend 2grand on one in 2 years time?i Created a giant game in unreal tried to import it to a "enviroment" i made n got 2 fps. Blender 1 dohnut with sprinkles 3 hour render per click or movement. On a 1k worth pc? Is this thing just for whales or what? Nice pc tho
i personally would love to have nv7, but its just too expensive. nv5 is a great choice, good looking case with some quality fans. Phanteks is crushing it.
I have a few questions I hope you could answer! 1) did you just need to plug the Lian li fans on the cooler straight into the hub or did it need to do anything different considering it’s on the cpu cooler. 2) did you plug in the cpu cooler is the CPU fan or AIO pump on motherboard because I have the same aio and cpu so I’m curious. 3) how are your temps so low, my cpu idles at 53°-63° then play rocket league at 64° but on apex and cod it shoots up to like 72°-85° then my pc gets quite loud. Sorry for so much but I’ve been stuck not being able to figure anything out
Great video! I think you should have used Phanteks D30 fans. They are absolutely gorgeous! Did the ram work? I have the exact same ram, and have been thinking about going from stable 14900K w/4090 FE to AMD w/5090.
Thank you so much for being such an informative streamer! You've taught me a huge amount.
I hate how much I love this case after building my son a beautiful new pc with it. I wanted it for myself but my heart belongs to a future build with the Thermaltake 300. This NV5 is a clean, easy, almost perfect build I can't recommend enough. This was probably the most satisfying build I've ever done.
the reversible connectors on motherboards are a great and obvious idea and great for a dual chamber case liek the Y70 for example.
Not the best choice for a case, but as long as you like it. The air flow will be turbulent and not as efficient as it could be. A simple smoke test will prove that.
QUICK Question... Which motherboard would be best paired with Ryzen 9 7950xd. That's the processor I currently own. I haven't opened it since I have no motherboard yet. @PCCentric can you recommend a board to choose in white. That NZXT one looks great.
I would go with either a mid end or top end b650e motherboard or a mid end or top end x670e motherboard. Now which one it all depends on your color scheme, how many ports you need, the vrm's etc. You will have to do research on youtube and online. I went with the same motherboard in this video with my 4090/ 7800x3d all white build in my profile picture.
rig is beautiful, wish the gpu matched the color scheme and wasn't the FE but its a 4090 so who wouldn't just go out of their way for this little demon.
Love watching your journey. The NZT motherboard is the perfect match to the case. Would be interested to hear if you would have considered an RX 7900 XTX in place of the 4090? It has the same 24gb VRAM for you video editing workloads and should provide great gaming performance as well. Plus it comes in all black editions which would have looked great ;) Interested to hear your view on going Team Red for your own use cases.
The Lian Li AL 120s have a nice backside right out of the box making them ideal for this type of case
Hey PC Centric!! Quick question for you if you can answer. I was thinking about building a new rig with a 7800X3D as the cpu do you think I will need X670 mbo or do you think the B650 will be enough for the build. I'm asking this because i saw you used a B650E from NZXT for your CPU and it made me curious.
Yes it's enough and will be fine.
Very nice-looking build, with a lot of potential.
not having any airflow under the gpu is the killer for me with this case, build looks great though
Use those small copper heatsinks the use on laptops and steam decks for your m.s they should fit under the white panels and if they peak out from underneath theyll match the ram sticks boom 💥
or if your going all white you could get the msi suprim x rtx 4090 as it’s quite a silvery look with its brushed metal look
You could have routed the AIO cables in between the vrm heatsink and the ram ?
use of strimers etc would make your pc look more beautiful
With their recent history it is almost not necessary to mention stay away from EK products. Otherwise any brand would suffice for your waterblocks.
get a less wieldy screwdriver and using it won't be such a chore; namely better control if a screw gets loose
that's a nice build. It's be a shame if they gave you black cables for the cooler. Oh....
The case seems more warm white vs the cold white motherboard!
proud to say i’m watching this in celebration of finally saving up money for my first custom itx build! 4080 super, 7800x3d, and 32 gb ddr5 cl30 ram, and a whole lotta storage!
Nice build and how much storage?
@@MrAnimescrazy 2 tb of samsungs 990 pro!:)
I felt for you, when you dropped the pump housing onto the CPU and board mate. Damn.
tbf there is a thermaltake waterblock with an LCD if you really wanted it
The color on the motherboard box is perfectly matching your banner. I think it isn't random.
Gigabyte do a white motherboard but I'm not sure what they are like, anyone know?
I'm slowly going for an all white build too.
Look up reviews online. I am thinking of upgrading to either the b650 or the x670 white and silver motherboard. They look really nice and will definitely go with an all white theme. I currently have the motherboard in this video with my all white build.
How is the RAM running? Since the white Corsair is meant for Intels XMP, these are not on the QVL, what speed does is with this motherboard?
To have a pc like this is a dream, Holy, Looks stunning
I did my first build this year with just fans and an aio, so ain't any time soon that I'd build another pc, but I do wanna try a custom loop in the future even tho I don't need it
If I had to pick a mobo right now tho, I'd go for the taichi carrara, it looks so damn pretty and I would try painting the hard tubes in same style
i was about to pull the trigger on everything in this video and then noticed that case only supports 1 USB-C .. isn't that odd? Shouldn't every PC have at least 3 USB-C ports???
What do you do with the old rig? i would like to build a new PC as mine is still a decent workhorse but its definitely reached its limits in terms of upgrades. Avoiding Facebook - would eBay be the best place to try and sell it?
Looks great! Think it would look amazing with a ROG Strix white 4090.
Do you do giveaways ? i lost my PC and everything else during a hurricane a week ago
Where is the best place to learn more about pc building because I'm a newbie and I really wanna build a decent one. Also understand what I'm doing and why.
RUclips. This channel and many others build pc's and go through the process. The videos are 1 hour to 5 hours explaining everything as they build the pc.
Also what is your budget?
Hmm that's a good question maybe 1k max give or take.
@tiredhero ok I can help with a build for that price. I can get back to you later.
you’ve made me want to do a white build now, so i’m looking for a new motherboard
What were you plans for the old rig?
chuckled at the radiator rage, saved by the "RAMBO" who can't be killed
I had the Phanteks NV5 Case, but didnt think it was great for cooling, so upgraded to the Hyte y70 touch and the cooling is just better for the 14900k and 4090, cheers.
Yo im about to build in the nv5, so happy you chose this for the rig
What are your specs?
Any thoughts/ recommendations on air cooled for this build?
I've heard the Thermalright Peerless Assassin is supoosed to be a good air cooler, cheap too. Its probably what I'm gonna go for in my All White build.
@@ISHOTGUNJENIyup
Deepcool digital in white.
Guys i got a 4060rtx should i get a ryzen7 7800x3d?
You can. Look at the fps you will get with that cpu and gpu combo to see if you get enough fps.
Been watching you from day dot. Love your videos, keep up the great work.
Why not run the AIO cables between the ram and top part of the MB?? Why run them over top of that rail?? lol. Other than that, it looks good!
22:40
could you walk us through step by step how to custom water cool ?
can you put a 3090ti Video Graphics Card in this pc case? is the pc case large to fit a 4090ti Video Graphics Card as well?
So what happened to the rig? Why was not working?
why not the white version of the shift power supply? It looks out of place.
I just bought the white 1,2000 watt power supply and can't wait to get it.
Just upgraded to a 4070 ti Super! It's been an absolute beast so far. Upgraded from a 6700xt and have gained about double the performance. Even more in RT performance.
I got the same gpu, two months of use so far and I couldn’t be happier. I’m pushing 75MHz on the core and 800 MHz on the memory through msi afterburner.
@@lysergicaciddiethylamide6127 yeah it's been fantastic. Playing Jedi survivor in 4k high settings right now. Might check out cyberpunk path tracing after this
The PC looks really amazing!!!
i cannot get my lian li lcd to power on..... everything else works, but for whatever reason i got no power to the cpu cooler...it's plugged into the psu and cpu fan on mobo ... idk what to do lol
I hope you react to us as wel, as i kinda want your advice😅
Im planning a build, did not do 1 in 20years but watched a lot of vids and am rather conviced i am able to manage. I am trying to build a 1440p am5 system, this does ensure me of being able to upgrade later on right? Am5 is the new standard and i would be able to upgrade that cpu in a year or 3 when there is more choice?
The 4090 is an obvious choice, but it really really screws the colour scheme of the rig. Which is a shame. Looking forward to you running the water lines. You gotta throw some copper accents in there if you can, I think it'd look great.
My exact thoughts - 4090 white strix would have been choice
I’m getting ready to build my PC now and your videos have helped loads, thank man!
Clean build, and nobody saw anyone drop anything
As much as I like the NV5 the cougar FV270 is just better. You should definitely check it out it may convince you to switch !
revers fan blades and itll be perfect
Good guess about the CPU, new chips are out, still not better than 7800x3d :(
Hey Marcus, sorry for the off-topic but what switches are you using on your ROG Azoth KB? NX Snow?
I 'am Building my PC soon and I was wondering, I have a 12900k I Bought Last Year. Or should I just go with the 14900k ? Heard the 14th gen was having Problem's...
13 and 14 have stability issues. Wait until after mid august when Intel releases the update to see if it fixes them. The 12 is still quite good.
so why do you recommend 6000 mh ram? what if im using a i94900k? would you use 6000 or 7000?
I like it as is, will be banging when you get done
watch the head cam view of pc centric dropping the pump head at 16:54 in reverse. it's like he is harry potter lol
should’ve went with a white gpu bruv
M.2 SSD's are super pricy now, that £500 on just the SSD storage, great SSD though and system, very nice.
some tend to go on sale for quite a lot cheaper, if the timing is right.
Thanks!
Does the shroud side come off? I got Cooler Master XG750 & need to show off the LCD.
Heyyyyy @PCCENTRIC, when is your next live stream?? I think Editor Karl and Marcus need a lunch invite...whats the word on AMD RYZEN 9000 SERIES????
Does the lian li sync well with the nzxt, rgb and fan control?
Thats my dream build but in black instead of white
your rig looks insane , great job and great video as always ..
phanteks nv5 and kraken elite just like minee
Don't put that in the video😂. Editor Carl is a funny guy! Great vid, great set up. Will be very interested to see the final look....
Lovely work
that's a clean looking case
Does watching this type of videos when you have an old Alienware running a 1080 counts as torture?