Wheel Spacers vs. Wheel Adapters
HTML-код
- Опубликовано: 31 авг 2016
- PREVIOUS VIDEO ▶︎ • How to Aim & Adjust Yo...
In this video, my little brother and make the golf flush by adding on wheel spacers and wheel adapters, along with get the car ready for new brakes. So we installed a set of 15mm wheel spacers up front, and a set of 25mm wheel adapters in the rear.
THIS IS A 100% SAFE MOD, if you install them properly. Make sure you use a proper torque wrench to install your lug nuts on the wheel. It isn’t rocket science, it just takes a few more seconds to do properly.
I’ve had wheel adapters on my Honda, and my older brother has adapters on his Mini. We’ve both had them for awhile now, and we haven’t run into any problems!!
Related Videos
How to PROPERLY Install Wheel Spacers ▶︎ • How to PROPERLY Instal...
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎
milanmastracci RUclips Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
NEW CAR REVEAL!!! ▶︎ • I BOUGHT A NEW CAR!!
How to Aim & Adjust Your Headlights ▶︎ • How to Aim & Adjust Yo...
IMPORTANT: Milan you used the wrong lug nuts. Please dont drive with the Golf until you fixed that. There are 2 different types of lug nuts with rounded or conical end. You can see the differenz at
Since I have a good understanding of hub bore, I’ve never wanted to get wheels spacers without the hub centric ring/lip.
your scrub radius could now be wrong as you've spaced the front wheels out, unless the aftermarket wheels were the wrong offset and you've now corrected it with the spacers. the rear spacers don't appear to be hubcentric, so that's gonna be dangerous, the studs are now taking the weight of the wheel as opposed to the hubcentric ring as the manufacturer designed.
Did the back wheels wrong, those lugs you put on for the wheel lugs are supposed to be the lugs that attach the spacer to the hub not the way you did it
Need a video on how to sort out bumper fitment! Yours looks slightly out!
would you prefer pushed out oem rims than low offset nice looking wheels?
Looks nice :) I might try using spacers on my car.
good job kidz👍, i have 97 accord and wana change the oem rims, what size i shld go for 17 or 18 for aftrmarkt rim?
what's the different of wheel spacer and wheel adapters?
why did you not go with hubcentric adaptors for the rears?
Do you get the same sized spacers for the rear tires? So like 15mm in the front and 15mm in the back?
Awesome info as always ma man.
What size where the wheel adapters? The smallest ones I could get from ECS for my Audi where 22mm and I’m concerned it will push the wheels out to far.
Hey Milan I have the exact same car and the doors don't close properly, if this also happens to you as well is there a way to fix/adjust them??
I just bought some for my Mazda they fit the car perfectly but their to big for the rims. What could be a solution
Excellent job on detail and putting the cookies on the lower shelf. Sure it's not rocket science but you pretty much answered most every reasonable question some of your viewer might otherwise have. Thanks much for doing this.
What is wrong with your front bumper? It doesnt fits well as i see :/
What kind of spacers are those for the front......I need to get some like those
Very good. Thank you.
Hey guys quick question where did you order the 5 lug to 4 lug adapter ?