Another great video, but the links in your description is broken :P Also, how did you manage to damage the motor, what happened to it? Is fitting a bearing at the end of the motor required for this installment (as mentioned in the belt mod video)?
Thank you Medek, I changed original brushes. Old brushes was more effective but nearly finished. Motor came back from dead. :) Realy, I wasn't expected, It will work again.
Hi, after replacing the encoder - everything "seems" to works. But there is slightly difference between the original 30ppr wheel and the replacement. Can't make it calibrated. Wheel calibrate itself just fine, but within the software - I can't set up correct rotation. When I do, then it start to behave weirdly. Turn right to the max position -> ok, turn left to the max position -> ok, next turn right -> ok, next turn again to the left -> position is little bit different (smaller) than previous turn. When you rotate with the wheel right to left between furthest positions, the left position is smaller with each turn. So you'll end up with wheel rotating only in small portion. Don't know how to describe it well. With 60ppr wheel - it is weird even more. With 30ppr it behave like I described. Seems like the geometry/groves/holes in the 3d printed wheel needs to be precise(?) I'm trying to print different versions - 30 holes but different size variations.
Ciao ti volevo chiedere ci hai pensato ha collegare l'elettronica direttamente a un motore grosso e collegarci lo sterzo direttamente al motore con l'elettronica per fare funzionare il tutto
Bro! First at all. That's amazing! Now I want to get the 3d print part but I'm from Colombia 🇨🇴 🙃 I really need it for my driving force gt who don't works since 2 years. Please help me to get it works again 🙏🏼
Another great video, but the links in your description is broken :P Also, how did you manage to damage the motor, what happened to it? Is fitting a bearing at the end of the motor required for this installment (as mentioned in the belt mod video)?
Thank you Medek,
I changed original brushes. Old brushes was more effective but nearly finished. Motor came back from dead. :) Realy, I wasn't expected, It will work again.
hola. .felicitaciones!!! Exelente trabajo!
Ya tienes el Kit para vender? para un GT. Si aun no lo vendes me gustaría hacerlo.
Muchas gracias
Hi, after replacing the encoder - everything "seems" to works. But there is slightly difference between the original 30ppr wheel and the replacement.
Can't make it calibrated. Wheel calibrate itself just fine, but within the software - I can't set up correct rotation. When I do, then it start to behave weirdly. Turn right to the max position -> ok, turn left to the max position -> ok, next turn right -> ok, next turn again to the left -> position is little bit different (smaller) than previous turn.
When you rotate with the wheel right to left between furthest positions, the left position is smaller with each turn. So you'll end up with wheel rotating only in small portion. Don't know how to describe it well.
With 60ppr wheel - it is weird even more. With 30ppr it behave like I described.
Seems like the geometry/groves/holes in the 3d printed wheel needs to be precise(?) I'm trying to print different versions - 30 holes but different size variations.
(P:S: I am going to sell it on ebay as a kit as soon as posible.) is true bro? niceeee. great video
Thanks Rodolfo.
Buying this encoder as a full kit, might be easier for someone who knows using screwdriver only. 🙂 But I am not sure.
@@MrCelali 🤣🤣🤣🤣🤣 very very nice bro hahaha
Ciao ti volevo chiedere ci hai pensato ha collegare l'elettronica direttamente a un motore grosso e collegarci lo sterzo direttamente al motore con l'elettronica per fare funzionare il tutto
Sory. I couldn't understand.
Experiment direct drive for eletronic logitech
Just saw this bit. Gonna check if this thing would work with the g25/g27
Bro! First at all. That's amazing!
Now I want to get the 3d print part but I'm from Colombia 🇨🇴 🙃 I really need it for my driving force gt who don't works since 2 years. Please help me to get it works again 🙏🏼
Hello MeroVago, @moditektr. Write me via instagram.
Alright ! I did it ! Hope u reply me so soon 🙏🏼🙏🏼
I am your subscriber😢
would it be possible i get the 3d files for free ?
Write me on instagram.
@Moditektr
Can i use original encoder with this sensor board?
You should make your design to use it. It will be hard.
@@MrCelali yeah i know that.. thanks✌️
@@MrCelaligive idea plz about orignal encoder with this sensor how to fix
@@MYsim_truckers how did you fix plz explain
I am your subscriber😢
What do you need?
@@MrCelali I give you my contact number i talk about streeing wheel DFGT important plz plz plz plz plz plz
@@MrCelalii talk about streeing wheel DFGT important plz plz
@@MrCelalii have old streeing wheel 60 slot encoder wheel and mount give me idea
@@Ak_Alone56 write me on instagram @Moditektr We can Share Media via instagram.