DIY Sim Racing Pedals (3D Printed)
HTML-код
- Опубликовано: 7 сен 2024
- In this video i will show you how to make a simulator pedal set yourself. I used a 3D printer to make the pedal set. You can find all the materials I used below.
Materials for this pedals: a.co/9iYMlyf
My favorite sim racing equipment on amazon: a.co/fSUxQDF
3D Models Files: bit.ly/2Hp8hgM
Schematic: bit.ly/2Hp8hgM
- 40x40 Square T-Profile 6mm Mounting Rod Profile
*3 pcs 300 mm - bit.ly/3oo9QLy
*2 pcs 400 mm - bit.ly/3qxoi5Q
- 6 pcs L Shape Inner Joints: bit.ly/2VGu3QJ
- 4 pcs Profile Covers: bit.ly/39QQiLV
- 18 pcs M5 T Sliding Nuts: bit.ly/3lLe66d
- 3 pcs 10K Potantiometer: bit.ly/3kpT5x6
- Throttle Spring OD: 28mm L:80mm
- Brake Spring OD:28 mm L:80 (Harder than Throttle)
- Clutch Sprint OD:28 mm L:80 (Harder than Throttle)
- Cables: bit.ly/3qxpGW5
- Allen Keys: bit.ly/33QE0iP
- 23x38 cm 5mm Thickness Wood
- 23x38 cm Floor Covering Carpet
- 18 pcs M5x16 mm Hex Cap Head Screw
- 6 pcs M5x20 mm Hex Cap Head Screw
- 6 pcs M4x40 mm Hex Cap Head Screw
- 3 pcs M5x40 mm Hex Cap Head Screw
- 3 pcs M5x35 mm Hex Cap Head Screw
- 6 pcs M3x16 mm Hex Cap Head Screw
- 12 pcs M5 Selflocking Nuts - bit.ly/2VGEunc
- 6 pcs M4 Selflocking Nuts - bit.ly/2VGEunc
- 6 pcs M3 Selflocking Nuts - bit.ly/2VGEunc
🛠️ Tools:
- Ender 3 V2 3D Printer: bit.ly/3mPeEcG
- 3D Filament: bit.ly/33NPp32
- Cutting Mat: bit.ly/39JQdcY
- Minleaf ML-BD2 710W Bench Drill: bit.ly/3lLR2UP
- Soldering Iron: bit.ly/36OIubE
- Solder: bit.ly/33QSyyS
Instagram: / ilgeipek
Wow.. been trying to make a long lasting pedals... seems your have made one... about going to print it now thank you for sharing !!
i'm bouta make my own whole diy setup
Those springs are not enough for the immersion, apart from that build quality is top notch
just buy a damper and increment in the project
I need a set of pedals for a spare gaming rig - something to use with Mudrunner/Euro Truck and the like. These look fine for that purpose.
@@marcosdimoise8662 what is a damper?
@@szalonykierowca5870 an oil filled shock absorber to give the feel of a brake pedal.
I slightly modified and made your design. Thank you for sharing
This is awesome and I'm printing out a set now. Have you thought about running fillets around all the top edges? That way you wouldn't have to razor blade the edges.
Hall effect sensors give more precise actions might be fine for eurotruck but it is required for racing games
Lovely build, thanks for sharing, liked and subbed.
How is the pot shaft coupled with the spur gear?
Also, is there a standard stiffness for spring?
Also also, why does the clutch pedal have a shaft inside the spring and others don't?
oven spring hinges work great
Thank you very mutch for all i have make them and this is sick❤❤
what a high-quality job! Fascinating, good job!!
I can already see my feet pounding the brake pedal to dust.
me too, i have european size 45 xD
what you using the brakes for man? should only be using the accelerator for MORE POOOWWWWEEERRRR
@@void3923 Brakes are used for slowing down usually
@@shatterpointgames wtf is slowing down?
@@void3923💀
Maşallah, çıtayı arşa koymuşsunuz 👍👏👏
I used this with arduino uno running unojoy and it works
nice build ,now you only have to make a gearbox for your set :)
Can you link a source for the springs?
Hello! I printed these pedals and put them together. I noticed 2 problems: the springs fly out of the mountings. And the upper spring mount prevents the potentiometer gear from turning.
He used glue to hold the springs in the mounts
Nice racing shoes! Could you use a load cell for the brake instead of a potentiometer? Awesome build, never done a Arduino project before but I don't own pedals or a wheel ATM so I'm tempted to give this a try!
Yes, you can use a load cell too. It outputs a signal similar to a potentiometer. The harder you press the higher the signal, which the Arduino can read easily.
THANK U VERY MUCH, i wanna next film but with H-shifter, would you do it?
He did it already
Search the channel name İlge İpek
Hi, mate! This project saved me ton of time both in design and print as quickly I needed pedals to repair a Logitech Momo set for a friend. I upgraded them with RC shocks and am pretty happy how it turned out. I wanted to ask - what is the licensing for that? I would like to share my extension of the design so other people can download and use it for free too if possible! Cheers ;)
Did you also make the steering wheel setup? Also any plans for making an h pattern shifter to go along with the two? :)
ruclips.net/video/Z6KJjC0PB4I/видео.htmlsi=Lqns_Oa3DeDxrwyi
Güzel olmuş devamını bekliyorum
great preject.. thanks for share
potentiometer is a failure point, hall effect switch would not only be much easier, (cheaper), but it won't fail.
I Dont understand how you soldered the potentiometers to the nano but selected the leonardo chipset and the com port you chose was called arduino leonardo on the device manager, how so
He used arduino pro micro, pro micro is just smaller version of leonardo, check the internet it looks like nano!
One thing I'd do different is Hall effect sensors instead of pots but good job, these came out great. How are they holding up 2 years later?
I actually do these projects by developing them at different levels, from simple to difficult. It will be improved in the next versions. thanks for your comment
Is there any other way to operate this build with a arduino uno ?
great project! this ist, what i was looking for. i disassembled an old pedal-unit from a thrustmaster steering wheel. the potis are the same. i assume, they run on 5v, cause you wired it to the arduino, right? so what is mmjoy2? as far, as i understand, its an interface for arduino, so you dont not have to write your own sketch, and it provides a virtuell joystick, that windows can "see", right? i want to use this for MAME.
So nais man! I want a steering wheel with force feedback and a H-Shifter! That will be awesome
where can i get the springs?
Great project i wanted to buy this from logitech but they have hiked the prices and i have a prusa so I'll make this for my birthday gift
Podrias crear el modelado para instalar un sensor hall? seria genial, saludos
Fusion veya STEP dosyalarını paylaşma şansınız olur mu? Mümkünse elimdeki 2020 profillere uyarlamak istiyorum da.
Nice build! Do you also have a link to the sketch?
thanks for the video, really motivate me to do this racing video game controller setup. i want to ask if i can also connect the potentiometer for steering wheel with the pedals to 1 arduino leonardo pro micro ? thanks
Where did you find those springs?
what microcontroller that you use for this?
U read my mind
This needs dejavu
Sir can you make shifter and hand break
Soon this will be the only way to drive an ICE car.
Ilge, for what are the gerber files?? because you didn't use it on the pedals
hey, do i need a breadboard and 2 resistors to make the connections ? like for the pedals and the steering wheel (with shifters but no ffb), and which resistors do i need ?
Hey Wilson, you can get the details on my blog: ilgeipek.com/sim-racing/diy/pedals/
@@ilgeipek_en really cool ! Thanks a lot
Approved 👍
good work !
Çok güzel olmuş eline sağlık.
Stl dosyaları arında debriyaj pedalı yok. Diğerlerinden farklı olarak yayın içinde bir parça var. Malzeme listesine eklermisin.
Debriyaj pedalı ve arka parçayı ekleyebilirmisin?
does anyone know what springs i have to use? i saw the description but when I look on google i get a lot of springs and idk which one i have to get. Knowing the force of every springs would be great
Throttle Spring: 1-2 N/mm
Brake Spring: 4-6 N/mm
Clutch Spring: 2-4 N/mm
I cant find springs
Do you have link for those springs? How thick spring wire did you use?
Gear stick next plz
Hey, can I use Arduino nano it's like a clone to Arduino pro micro I think
No it isnt, nano is smaller version of uno, pro micro is smaller version of leonardo. And if u don't know, uno (and nano) arent possible to use as a controller/keyboard
Where can I get the firmware you see in the video?
make a DIY shifter and e-brake when you can
where are the STL files for the clutch spring thing ? thanks :D
Can you explain how you got the PC to read the input from the potentiometers. Im trying to do this but don't know what code to write for the computer to regonize this as a controller :( I'm lost id be willing to talk to anyone over discord if they know how
Shifter next 6 speed
Ficou perfeito !
os gringo manja
Falta el modelo 3D para el embrague, los demas estan bien
1:31 D: don’t do that!!! It with break the tap off in the hole!!! Only hand tap threads in aluminum!!!
Wheel not working with forz horizon 4
I cannot get the games to recognize the mmjoy. They always say controller disconnected when using an input. Anyone else have this problem?
Plz make a gt steering wheel
what type of arduino did you use for this project?
Pro micro, u can use also leonardo, its the same, just larger
Good job! What's that small IC chip you are using?
If you are referring to the small blue one he wired all the potentiometers to, it's an Arduino Pro Micro. For most projects like this you would use a Pro Micro or possibly an Arduino Uno, as they can operate as keyboard / mouse / joystick on computers.
@@truepennytv I believe an Uno doesn't have HID compatibility. The Leonardo does. I would suggest a teensy though. Since they can read potentiometers at a higher resolution. The Pro micro (and leonardo I believe) only do 10 bits (1024 values over the full range) where a teensy can do up to 16 bit I believe (or even 32 Idk). 16 bit would give you 4x the resolution so 4096 values over the full range. Especially if you're doing a wheel. You'll need a fast microprocessor for accurate high resolution encoder readouts. I'm building a wheel which uses a motor with an encoder on top of it that reads about 5 steps per degree of rotation. If you flick the wheel 180 degrees within half a second, you need to make sure that it won't miss any step of the encoder, cause if it happens too often it could result in a weird offset from straight.
i wonder how long does PLA hold all this
Where can i buy spring like this?!?! Help please:(((
If u plan on doing 2nd version try using Hall effect sensors
Don’t think it’ll work
@@ThomasLancheros-kg1nl maybe your broke mind won’t work
@@CHIRAG_FPV Damn. 2020 was a stressful year for you? What an unnecessary insult
@@jenshendriks9092 @mr_beast 1098 dosent even know how it works
@@CHIRAG_FPV Why do you care? XD
damn these shoes bro
Hi how its going? can i ask you for the fusion 360 files? i would like to make a few modifications
Hi. Can you post the f3d file?
hi, what code did you use for the arduino?
wow 💥
Next is the shifter
I don't know why, but I was expecting load cell brakes
how can i buy the springs ?
ilge abi normal kanalında yorumumu göremeyebilirsin diye bu kanalına yazıyorum sen kanalında bunu leonardo ile yapabilirsiniz demistin ben uno ile yaptım ama pedalları ahşap bir kasada yapmak istiyorum o kullandığın dişlilerin 2d çizimini alabilir miyim cnc kesim yaptıracağım da
can u make a h shiter next vid
what are the spring wire diameter anybody?
can you do handbrake?
Sure! I will publish my handbrake video soon.
hi what arduino code did u use
Hocam DIY 3d printer projesi gelir mi acaba ? :D
başkalarında gördüm ama adam işin uzmanı felandı ve pahalı ve karmaşıktı yapımı. bunun basitliğinde bişey gelirse gerçekten çok iyi olur
where's the arduino code for the pedals please
He's using MMJOY2. I believe it can be found on Git. MMJOY2 will program your Leonardo.
@@elimiller2658 yeah but on the github there aren't any .ino files
@@ajdaunay2983 did you see all movie? He shows that in 1st place that he put hex file to burn in arduino, then he started to make configuration of pedals
What cost is it?
Abi kablolu kulaklık yapar mısın ?
abi pedal gaz yayı silinmiş yok linki yenilermisin
Alguien tiene el modelo 3D del embrague???
Çok iyi
what pcb did you use?
If u mean what arduino then pro micro, u can use also leonardo, its the same, just larger
@@Alexowyyy i see, thanks!
Clever
im so waiting for the h shift and handbrake
Abi sana nasıl ulaşabilirim yerin nerde
How much would this cost me?
I dont want to be mean by why arent there f3d files? not everyone has access to the same resources dude. please share f3d if you still can
Hello, Can i use Arduino Uno R3?
You can't....sort of. Arduino leonardo has USB HID controller, and Uno don't, so you will not be able to program/flash the Uno with the used software
@@wiktorjaworski1710 wait did he use a nano or a pro mini I'm so confused
@@sh3ldox260 he used arduino pro micro.
Can i make it on arduino uno?
i dont think so try getting a cheap Leonardo for like $15
it also uses micro usb
And where is the arduino code?
abi gaz yayı linki atarmısın abiiiii
bu sistemi forza horizona bağlayabilir miyiz
ABİ PEDAL GAZI YAYINI LİNK ATARMISIN SİLİNMİŞ YAY
up up top manoo