1994 Toyota Pickup Headlight Swtich Multi-switch
HTML-код
- Опубликовано: 9 фев 2013
- This video shows a headlight switch and how i replaced it so that i had bright and dims on my headlights. I think its called a multi switch but the portion i replaced is the headlight dimming switch part. The working part i installed came out of a 1989 Toyota pickup and i had planned on replacing the whole assembly but after findind a major difference i instead replaced just the dim/bright switch section of the multi switch. I created this video with the RUclips Video Editor ( / editor )
Авто/Мото
Well >> ThankYou!! My '91 Carina II (Corona, non europe) is getting buzz-buzz-buzzy in the cowling and this has shown how I'm to swap a good turn contactor for bad. Excellent Vid >> very clear and easy to follow what needs doing. Many thanks again!!
Man, my 88 is showing same symptoms. I manage to get it to come on by giggling it but soon it will stop working. I was hoping the replacement was going to be simpler, but oh well, have to give myself the extra time. Thanks for posting .
I beleive it was a 1989 Toyota pickup and i put it in a 1994 pickup. Im quite sure toyota used the same switch on all their pickups and i think even the tacoma and 4-runners... If the switch (whole multi-switch) doesnt look the same you can take it off and then take it apart because the part inside (headlight switch portion) may be interchangeable to a wide band of years of toyotas. On donalds, his didnt have the ring on it that controls the wiper blade intermission so thats why i took it apart.
replaceing headlight and turnsingle switch. 1987toyato
Just had a ground problem with my 91 pickup. Frickin auto zone sold me an alt. that i didn't need. Turns out it was a combination of two different grounds and 7 corrosion filled wires under the dash. What a night mare that was. 6 days to fix it.
Yeah it sucks looking for that stuff hahaha! Especially if it gets expensive haha
What was that headlight switch off of that Donald provided for you?
Hey I can't get the pins to real ease off of the original black pin connection. My pick up is just like yours and am switching the headlight switch. I bought a new headlights switch from the dealership.
Alright cool thanks
Could have had more in the video, was there anything odd or hidden pulling all the first stuff apart?
Lmgdao @11:36
Also, what year/model honda did those seats come out of? I've heard '97 and up prelude seats bolt right into these early 90's Toyota pickups. Did you have to modify them to fit? Thanks!
hahahaha yeah thanks haha
Oh and 1996 or 1998 was the Honda they came out of. and they just needed bending on on bracket corner and the rest of holes seemed like they lined up... sorry haha can't exactly remember. I'm workin on posting this video bout the other toyota I fixed up so that should be up soon as well! thanks for watching
I'm trying to take off my steering wheel to change my light switch. is the nut the only thing holding it?
VICTOR M iyes it's only thing but it may need to be pulled off with steering wheel puller.
is it ground activated or positive
I believe positive activated
hey no offense but what was the point of this video? I was expecting to see an instructional vid or something?O_o
I just been screwed for replacing clutch master cylinder on my Toy...cant trust a mechanic when ur a female Toyota owner even thou i payed for my vechicle off the lot like every other hard worker out there trying to make it.
Please make a video for replacing headlights/bulbs on a 93 Toy Runner, thnx
Haha dang! I was showing that my headlight multi switch can be repaired using parts from another switch. I had switch from another truck but the connector was different so I took the guts from old switch and used them to get mine working again.
Sorry to hear you got ripped off with ur vehicle. I've been a certified mechanic for about 10 years now and I do my best to fix rigs at a low cost. It sucks when their's mechanics out there who do shady things. Anyhow, toyota pickups and 4 runners don't use bulbs unless the lights have been converted to different light system such as HID. So... to change the light assembly you use a screw driver and take out 3-4 screws. You get to the screws by standing in front of the headlight and you'll see them around outside of light. thanks for watching! !