How to Install Toyota Pickup Cluster SR5 4Runner Upgrade (Tach, Oil Pressure, Volt)
HTML-код
- Опубликовано: 24 авг 2024
- I read about this cluster swap on yotatech.com and really like the added Tachometer, Oil Pressure gauge, Volt Meter, and especially the Trip Meter. I found a cluster at a junkyard for $20. I adjusted the tach potentiometer and added the wire for the tach signal and everything worked perfect. I used the thread from yotatech.com for all the help I needed. It should answer pretty much every question you could have about the cluster swap.
www.yotatech.co...
Help Support my channel, purchase decals here - garagebuilthon...
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ jon_widmer
Thanks for watching
This is exactly what we are having to do right now! Same old cluster, same year! You are the man for this video!
Thanks man!!! Good luck with the install!
Garage Built Hondas would this work the dlx 3.0L 2 door
If it's the same generation
You gotta love the old school emergency brakes in a Toy.
Best description of how to take apart the dash assemblies I have yet to come across. Many thanks!
Thanks, you're welcome!
Another super cool upgrade. Very cool Jon. I just got a 92 2wd with very low miles that I cannot wait to make these upgrades too!
The turbo cluster in the 1985 turbo that is digital is out of this world. Also the fact it has an altimeter.
Does it mount up to 89-95?
@@leomullen6273 the mounts are different
Just used your tach wire tip and it worked like a charm. Thanks!
Awesome!
Thanks for the info, Been wanting to do this for a long time, but was intimidated. Didn't know where to start. Will keep this video when I get brave enough to attempt it.
Thanks for watching, its actually pretty easy.
I`ve never seen a Toyota engine that didnt have oil all over it ..congratulations!!
Lmao!
My 92 is nearly spotless 🤙🏻
👍
I think you mean Ford, or Land rover...
Thank you for the video bud, fuckin mint tutorial.. doing a swap from a forerunner dash to my sr5, definately saved me some time
Weirdly enough I got bored of the oem dash not long after and did a complete swap to a first Gen cluster and dash
Sweet, this is a great update. I'll get me one of this cluster for my truck, I'll probably need your help the oil pressure gauge.
You got it!
I would have liked to have done this swap - but my just inherited '93 Xtra Cab DLX already has it! Must have come with it, since my stepmom wouldn't have changed it, and she got it from the dealer. Weird;)
👍
That easy plug and play?? plus a sending unit change out for the oil pressure
Answered my tach question. Thanks!
Glad to help!
Amazing video my 93 pickup came with it.after converting it into carbureted engine my 93 Speedo does not work anymore..I looking to do a cable swap.
Very nice, that should hopefully do the trick!!
Thanks again I’ve completed the swap I used a 4runner speedo with cable and auto transmission. Getting the tach to work now...truck was an sr5 dLx everything was working
Nice! Glad to hear!
My cable swap has been completed...along with all leds just going get the oil sending unit.and tach working thanks again
Well that yellow wire work on putting a electrical tachometer for the RPM gauges to
I believe so, not 100% sure though. Try it!
Do you happen to know where the oil pressure sending unit is on the v6? That is the only thing holding me back from putting everything back together. lol
If looking at the engine from the front, it's on the bottom right side on the block. You'll see it sticking out.
@@GarageBuiltHondas I replaced my oil sending unit and my gauge still stays at zero, if I turn the ignition a few times it will rise with the rest of the gauges as part of the test, once the engine is started it will drop back to zero after a few seconds, usually it never moves from start to finish. Engine sounds fine, oil level is fine.... :/ Any thoughts?
It's broken possibly. This cluster never worked even after I swapped the unit. I ended up trying another cluster about a year later.
Hi, I hope you can help me. I did everything but the temperature, oil, voltage and gas level are not working. I already check the gauges in a 12v battery and they worked correctly. However, when I install the cluster into the truck they dont work at all. Any idea? Thanks in avanced.
Maybe have a broken cluster.
I solved it. It was a fus. Now the problema is that I conected the tach as you showed and it doesnt work. Any idea? Note: everything else it is working fine
No idea sorry. This is the only pickup I ever owned like this and I sold it over 5 years ago.
Thanks for answering. I will try to find the problem! Nice and very helpful video
Do you have a video showing how you put your stereo in? Having trouble finding constant 12v in stock wires.
I'm sorry, I don't. I used the original harness and bought one of those premade harnesses that plug into it. It was all labeled for wiring too.
Ok. If you come across another one of these clusters with tach shoot me a message. Thank you sir.
+deric meakins 👍
i’m having trouble with the volt meter after this conversion, any ideas ?
Can an sr5 cluster be installed with a 22re motor with no oil pressure sending unit needing replaced correct?
Thank you for video, it is very helpful. I'm just about to swap mine and I checek the wiring
Nice, good luck!
I have a 90 Toyota pickup and I am so mad I didn't read the description before I paid $40 for this cluster off of a 4Runner
What do you mean? This is a 4runner cluster.
Garage Built Hondas yeah I know but I purchased the one that's not an sr5 model so it doesn't have the cable in the back its all wires I should've read disclaimer first 40$ down the drain
Click the link from the Yota forum. I believe it tells you how to fix that.
Garage Built Hondas ordered the right one from eBay 100$😟
Darn, try to sell the other one!
Hey buddy I did everything in the video, and everything works except the speedometer, I hooked the wire on the back of the cluster and the rpm works..I even bought two speedometer from the junkyard and still , the speedometer not working.. What can I do?
Sorry I missed this. I can't imagine both are broken, that seems odd. You old speedometer worked fine?
Great video: Thank you!
Glad to help!
Awesome video! What's that orange plug to the right of the ignition for? Im putting my 95 runner back together and for the life of me can't find it's home.
No idea. This was the only Toyota I've ever worked on and I sold it in January 2018.
@@GarageBuiltHondas i ended up figuring it out, it's for the hazard lights. Cheers!
Nice! Enjoy it!
This sucks, I gotta do all that just to replace the air vent next to the driver door!
Exactly.
I did this swap and the speedo and odo did not work, I think it was a bad unit?
hey do you have a rear sway bar and if you do where did you get it
I don't. The truck was completely stock.
@@GarageBuiltHondas oh ok thanks man
Thanks man. This really helps 👌
Good to hear!
Garage Built Hondas bro I did this to my truck and I've tried several oil pressure sending units to make oil pressure gauge to work but they don't work by the way they are used o didn't buy a new one because I don't know if the harness pin outs are the same or need to modify any to make oil pressure gauge to work any help is aprecciate it everything else worked!
Your gauge on the cluster might be broken.
Jon, great videos. i was wondering if you might know if a 1991 toyota t100 gauge cluster will fit aa automatic 1990 toyota dlx?
I do not believe so. If I remember correctly, that cluster was a completely different build when I saw one at the junkyard.
I have a 1990 automatic with the shift indicators on the gauge panel but haven't been able to find a gauge cluster with tachometer and shift indicators. Any thoughts?
Michael Gonzalez Try eBay. I'm sure if you have one that doesn't have the shift indicators it would still work.
This worked for me so thanks for the video. Quick question: my fuel gauge doesnt decrease when I shut the truck off like it did with the old clusters fuels gauge's, is that normal (does yours do this)?
Darn, I can't remember. I sold the truck 4 years ago.
I have a question, the oil pressure sensor that I need to put has to be the one that had the 4 runner of sr5 where I removed the cluster
Yes
I have 1994 toyota pickup. I am looking for a the dash that is over the cluster. Does any one know if I can us a 4runner one ?
I got my new sr5 cluster in but even with old oil pressure sending unit unhooked it still runs my oil pressure gauge up. My question is if I install the sr5 sending unit do you think that would solve the problem
It might. I have since tried hooking up the sr5 oil sending unit and my gauge didn't work. I'm thinking I may have a broken cluster.
I installed the cluster but the oil pressure gage do not work, I did replace the oil pressure sensor but still no work, any ideas please...
It's probably broke. The first one I bought was broken also.
Question:
Why and how does your 94 toyota have those push out cup holders?
Is that something you buy? You made? Please tell me.
Its original toyota equipment.
I need help! So i did everything that you did and everything works 100% except for a frigging brake light, its on all the time. Oviously when the parking brake is on it illuminates brighter, but whe i disengage the brake it is still on but not as bright. Fluid is all the way to max so it shouldn't be the fluid, also with the old cluster i did not have any lights what so ever. Any ideas? please help. I hate having lights on the dash.
Check the cluster. It might have a burnt/shorted wire.
I replaced my cd player and everything turns on but no sound. Did you have that problem or know what it could be? I just bought a cluster and going to install soon. This helped alot thanks.
I don't. Double check your wiring to the speakers.
Hey man I hope u still answer your comments. I have a 93 that the speedometer( it is electrical) does not work. I am looking into 94-95 cluster from a 4 runner just like the one you used. So I have a few questions concerning the new cluster. But if by any chance you still have the original cluster from your pickup(which is the same as mine) and you are willing to sell to me if it still works and does not cost an arm and a leg it will buy it. It will save me many headaches. 1st what is the oms on the RPM for a 4 cylinder? 2nd what it the part # for the oil sending unit and is it the same for 4 and a 6 cylinder motor? 3rd do i just connect the 4 connections to the new cluster and does everything works or is there some other thing I need to do so it works? Hope to hear from u soon. Thanks Robert
No idea Robert. This was the only truck like this I never worked on and I sold it in 2018.
If the replacement gauge cluster came from a V6 does the truck getting the replacement gauge cluster also have to be a V6 or can it be a 4cyl??
No. Either work. But you'll have to adjust the potentiometer as mentioned in the video and link.
Hey I got a 1990 you think I could do this swap!
Yes
I have a 95 Toyota Pickup, my speedometer and tachometer does not work but the fuel and coolant meter works. Do you know what might be the issues?
No, sorry. I only owned this one truck. I've never worked on any before or after this one.
how do you change the Odometer numbers to match the vehicles true reading?
Jedi Lion I Googled a how to, found a few links and followed the directions. It's been over 2 years since this install, you may want to look around inline, I don't have any links saved.
Hope you switched out the sensor or you would blow the gauge out
Sure did. 👍
How did you get your odometer to match with your original mileage.
On that Toyota forum there was an instructional how to. I followed that sort-of. I was able to pretty much leave the odometer in tact and slide a couple picks into the numbers and get them to spin. It's working perfect to this day!
Can you provide me with the link. I tried and can't find it. TIA
I have a '93 4x4 and am trying to figure out what i need to swap a shifter bezel from the same era 4runner into it. Any knowledge on that subject?
Sorry, I've never done one.
If I tap into the yellow wire will I still have to do the potentiometer step or does that skip all that?
You need to do it.
You mentioned an oil pressure sending unit. What's that all about?
Original one doesn't measure pressure level. Dont try to install a new cluster while leaving the old sensor in, you'll fry your oil pressure gauge on the new cluster.
@@GarageBuiltHondas 😯 Holy shit. I would never have guessed.😮
in the middle of tearing apart my dash and putting the cluster back in the speedo cable is too short for me to have hand back there to plug it back in, noticed you dont seem to have speedo cable in the video, is your cluster wireless?
+Nick Zethof Yes, some of our trucks have the speedometer cable, are are electronic.
Hey GBH, i have an 89 toyota pickup 4x4 that the speedometer went out about a yr ago and i finally found me a local instrument cluster it is out of an 92 toyota pick up also a 4x4 and im wondering if it is going to work and what modifications i am going to have to make/incounter.?? Please help, im not all that good mechanic wise...thank you very much..
I don't have a clue, sorry. I sold my truck in Jan 2018 and only did mods from what I found online.
My speedometer seems to not be working, I put this into a 93 Toyota pickup. Anomuonr k or what I could do?
Anyone know *
These things are hard to find. $20 is a steal compared to eBay prices. I tried looking in some junkyards, but no luck yet. If I had a ford this would be super easy, junkyards are filled with fords. The treasure hunt will continue..one of these days.
I'll keep an eye out! I've sold about 5 on eBay since this install for about $70 each. My junkyards had a lot!
Аll hot girls arе hеre => twitter.com/29028126fb6055116/status/801992405775826944 SR5 Cluster Swapp into 94 TТТToуоtаaa Pickup 89 95 models 2WD DIY Hоw Too
I found a good one with 157k miles on ebay last week for $84 with free shipping
I just swapped the cluster of my 91 pick up watching your video and it worked perfect the tac but the speedo doesnt work. The new cluster its an electronic but not the old one... Any suggestions so i can make it work or do i have to find the cluster with the old sistem?
I believe I responded to you though Instagram
would a 4x4 pick up truck with a 22re motor in it .. can the Guage cluster fit in a 1992 2wd pickup ? and how do u adjust the pentometer
Yes it will work. Look in the description of this video. I have a link that'll help you with the adjustment of the potentiometer.
I checked the wiring and and my pickup is not prewired for the tachometer, can you please tell which wire did you tap in the distributor coil? I think I heard you say yellow wire but I'm not sure. Please let me know
Correct, yellow!
Thank you
I have the 22re engine would it work if i swap the tech from a V6 4runner
Yes, but you will need to adjust the potentiometer, same as I did.
Hey bro. Great video & can’t wait 2 do this mod. Question. Can I fit a 94 4Runner cluster 3.0 4wd 5speed on a 94 pickup 2.4 4wd 5speed ? Will it work properly?
I don't know for sure. Read through the link I provided. I've only done this once and no longer own the truck.
bro I did this to my truck and I've tried several oil pressure sending units to make oil pressure gauge to work but they don't work by the way they are used o didn't buy a new one because I don't know if the harness pin outs are the same or need to modify any to make oil pressure gauge to work any help is aprecciate it everything else worked!
I have a 1989 toyota pick up could i install a sr5 clúster like yours?
Yes
Why exactly did you remove the glove box ?? There was no need on my 94??
Watched a video, followed the instructions.
@@GarageBuiltHondas Your video is excellent and helped me a lot on my swap of a non working speedo with no trip meter to full working gauges!!!
Excellent!
I did this but the speedo dont work my base one works but sr5 dont
👍
Does this cluster have to be fron a manual trans 4runner?
I'm not sure completely. My guess is no, only from my Honda experience where auto clusters work just find in manual cars and vice versa.
What exactly is a potentiometer and what does it do for the cluster?
Basically a resistor which measures RPM. Going from a v6 to 4 cylinder will need adjustment to show correct rpm reading.
awesome video thank you
You got it!
I just did this with my 1989 toyota pickup. it has a 5 speed swap. What speedometer cable should I use? And how should I go about with the tachometer?
The cable for any 89-93 will work. I believe the 94's were all electronic speedometers. And what part about the tach? The wiring, or the adjustment of the potentiometer?
The wiring and adjusting the potentiometer
+Sean Trimmer Plug in the instrument cluster first. If the tach doesn't work then follow the instructions that I put in the video. Is your cluster from a v6 model sr5? Then you need to adjust the potentiometer if it is.
Do you have a clinometer for sale?
+deric meakins No I don't.
Me gustaría hacer lo mismo, también tengo la misma camioneta, ¿puede darme el número de pieza del grupo, por favor?
You'll need to find a cluster, they're not available new anymore.
Do you know if the cluster from a 97 will work in 89
I doubt it.
Hey bro what type of wire did you use for the tac to work?
I believe it was just some 16 gauge electrical wiring.
What company makes that dash cover you got on it?
No idea. It was on the truck when we got it. Google "dash mats"
Does the speedo and odo work?
Yes
do you have a speedometer cable?
I do not, sorry
how do l bypass electronic speedometer on a toyota pick up 1993?
Did you find a cable speedometer cluster?
No
@@GarageBuiltHondas I have a 93 22re electronic speedo cluster and a 95 sr5 cable speedo cluster trying to put in.. any tips how to hook this up correctly?
Click the link in the description. I believe you can remove the plug and use the cable still, almost positive I read about it in there.
set your old mileage on the new cluster?
Yes
@@GarageBuiltHondas how did you go about doing that I'm sitting here looking at mine torn apart not trying to break all these little gears
There's a link in the description to an old forum.
Any idea if I can swap the electronic speedometer out of my '94 pickup DLX 22RE cluster into the '95 4Runner SR5 v6 cluster I got at the junkyard? I've come across 7 of these 4Runner SR5 clusters in the junkyards near me -- ALL of which are for the cable speedo, which stinks since my pickup is electronic speedo. It's a bit of a shot in the dark, but I just don't want to go to the trouble of removing my DLX's cluster only to find out it won't work (if it indeed doesn't). Thanks!
I would imagine it would work. All of the connections that make it work on the 4runner work on my Pickup. I just added the wire for the tach, that's it.
hey I just bought an electronic speedo and need a cable one! lets swap? haha
John Chavez lol, I'm good! Haha
my bad was replying to cbh148! haha
+John Chavez Woops, lol!
heya pals, i have an issue.. not sure if its with my truck or the cluster I got.. i used both the resistances noted in the video.. and I get this result:
the tach goes from pegged at zero to approx 2500/3k RPM once i move key to position 2. once i start it, it only goes up from there when i press the gas pdl. also, none of the lights on the dash, nor turn signals work. any ideas?
What type of wire did you use to connect the tach?
Just some regular electrical wiring from the local auto store. I believe it was 18 gauge.
@@GarageBuiltHondas awesome, thanks! just didnt want to use something too small
l have to install an after market cruise control on my 1991 toy. pickup ... is there any one in the Houston, Tx. area that can help me install this Rostra unit? ... l don't want a lot of trial and error. Better if someone with the experience to cut straight to the right outcome. Contact me here on you tube please.
Nice Video! I'm about to get that cluster myself but mh main concern is how exactly do you adjust the potentiometer? I read and saw pics of the link you posted but really doesn't say how to increase resistance?? I see that it says to check resistance but how exactly to you increase it or adjust? or am I missing something?
Tooslow_srt You adjust it by spinning it. You can spin it with a small screwdriver at the same time you are checking it and adjust accordingly. It's easier than it sounds. I wasn't as thorough making my videos back then and I should've recorded this part also.
Jon Widmer where exactly is it that you spin it? where is the screw at?
It surprises me how a lot of the guys have a hard time coming across these clusters. Over here at junkyard I come across them everywhere, basically stepping all over them. 4 runners left and right.
Tooslow_srt At the :32 second mark you'll see the white part circled. when you look at yours, you'll see exactly where the screwdriver is inserted. You can see if from the back better. You'll need to remove the tach portion of the cluster to get to it.
Tooslow_srt I've found about 6-7 of these clusters over the last 2 years also.
Is that a 4 or 6 cylinder?
+RoadWarrior 41 4
where can i buy the cluster?
Junkyard
Where can I buy one ?
Junkyard or eBay
how much did the cluster cost?
$20 at the junkyard
Can be work 95 4runner sawp to 95 tacoma
+Victor Gomez I don't know if the clusters are the same setup. It might, Google the info. You might find something.
what kind of dash mat is that
Couldn't tell you. My dad had it on there for like ever. You can purchase them online.
Ok thx
its diesal engine
Ayeee yeee
quit stealing the clusters that us manual drivers need
This video is so old. I'm long past messing with these pickups.