How to Replace Rear Brake Caliper 2004-12 Chevy Malibu
HTML-код
- Опубликовано: 5 авг 2024
- Buy Now!
New Brake Caliper Set from 1AAuto.com 1aau.to/ib/RABCS00010
A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle. This video shows you how to a rear brake caliper on your 2008-2012 Chevy Malibu.
• Check here for more videos on the 2008-12 Chevy Malibu: • Chevy Malibu 2008-2012...
This process should be similar on the following vehicles:
2004 Chevrolet Malibu
2005 Chevrolet Malibu
2006 Chevrolet Malibu
2007 Chevrolet Malibu
2008 Chevrolet Malibu
Tools you will need:
• 19mm Socket 1aau.to/oa/1AXAA00043
• Hose Pinch-Off Pliers
• Needle nose pliers 1aau.to/oa/1AXAA00051
• Needle nose pliers 1aau.to/oa/1AXAA00052
• Pliers
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Gloves 1aau.to/oa/1AXSS00048
• Safety Glasses 1aau.to/oa/1AXAA00343
• Floor Jack 1aau.to/oa/1AXAA00068
• Pick 1aau.to/oa/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy Malibu 2008-2012 7th Generation: • Chevy Malibu 2008-2012...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
great video. Just wondered why you didn't use a hose and bottle to catch the fluid when you bled the brake line.
Great video. Was able to replace the caliper without issue. The torque specs is exactly what I needed. Thank you!
Thank you! I have a 2015, but you showed me the things I needed to know!
+Jon Hunt Thanks for the feedback! 1aau.to/m/Shop-TRQ
Excellent presentation! This is what I was looking for on my 06 Buick lacrosse, not exactly the same caliper but close enough, well done 👍
Thanks for the video, boss. This was extremely easy to do after watching.
Thanks!
great video, excellent production value :)
Excellent illustration I did it in no time and yes I am a lady your business
Good job on the video, lots of useful information. I was hoping to see a specialized tool that would make the brake cable easier to remove than using a pair of pilers. If one's out there, please post a link to it. Thanks.
Didn't know if you had this🙂
what is the lubricant type that you use?
Brake grease
Overall this is a solid video, however I absolutely do not recommend pinching off the break hose as it can damage the break hose internals. Just let the fluid drip in a drip pan and just refill the DOT 3 in the reservoir.
+Walter Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great video and here is a neat trick. Use a pole/board/pipe etc that's long enough to go from the brake pedal to the drivers seat front. Set it up to depress the brake pedal just to the point resistance starts and leave it. The normal amount of fluid comes out initially loosing the line at the caliper, but then it stops. This procedure prevents brake fluid from emptying the reservoir and you don't risk damaging the line by crimping it. Neat trick.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
2009 Chevy Malibu front brake caliper how to replace 2004-12