GrimmSpeed BPV SOUNDS! | Subaru WRX
HTML-код
- Опубликовано: 5 июл 2024
- Sound clips of the @GrimmSpeed BPV paired with the GrimmSpeed Cast Aluminum Turbo Inlet on my 2018 Subaru WRX!
Thank you for watching! If you liked the video, please subscribe to the channel by clicking here!: bit.ly/2KvMm8O
Follow me on Instagram!: @ ronfromportland
Timeline:
Intro - 0:00
Interior Sound Clips - 2:09
Exterior Sound Clips - 8:39
Final Thoughts - 13:42
Relevant Links:
►Mod Overview: • How I Made 300+ WHP in...
►Nameless Performance BPV: • GrimmSpeed Turbo Inlet...
►GrimmSpeed's Install Video: • GrimmSpeed FA20 Bypass...
Car
3AMotor Duckbill Spoiler: amzn.to/3xz6hKn
Trunknets License Plate Bracket: amzn.to/3JQG3X0
J-pipe heat wrap:
amzn.to/3kgUHM5
Metal zip ties for heat wrap:
amzn.to/3xWUAO4
Subaru Key FOB Protectors:
amzn.to/3RN0AjP
MaxxHaul Cargo Roof Rack: amzn.to/3Euyy6j
Whiteline Shift Bushings: amzn.to/3LCjZ2y
Group N Transmission Mount: amzn.to/383NGfj
Diode Dynamics SS3 LED Fog Lights: amzn.to/36uNWTW
Cabin Air Filter that actually fits!: amzn.to/3Mkdl1T
Push clips: amzn.to/3JXWz6S
Motul X-Clean EFE (5W-30): amzn.to/3k8y78F
First Aid Kit for Traveling: amzn.to/3MiCb27
Trunk Organizer: amzn.to/3MaSlKM
Portable Tire Pump: amzn.to/3vzdisi
Cleaning
Chemical Guys Mr. Gold Foaming Soap: amzn.to/3JZq2gF
Chemical Guys CLN10116 Hyperban Antibacterial Cleaner: amzn.to/3KYcyTN
Chemical Guys Floor Mat Cleaner: amzn.to/3xDyvUy
Foam Cannon: amzn.to/3wFYYjt
SunJoe Power Washer: amzn.to/3IOl1XG
Adam’s Wheel & Tire Cleaner: amzn.to/3uUIFx9
Wheel & Tire Brush: amzn.to/3OlOyMv
Turtle Wax ICE Spray Wax: amzn.to/3qImcC4
Video
Sony ZV-1: amzn.to/3qEK1KM
Sony ZV-1 Batteries: amzn.to/3qKWEUJ
ULANZI WL-1 Wide Angle Lens:amzn.to/386rqRD
ZV-1 Camera Base Mount Bracket: amzn.to/3LhUm7o
Movo Double Mic: amzn.to/3wDJ5dD
Movo VXR10-Pro Mic: amzn.to/36uNaX2
SanDisk 128GB Extreme PRO: amzn.to/3qBvTlJ
Studio lights: amzn.to/3iHf9Fc
Joby GorillaPod 3K Pro Tripod: amzn.to/36WDR1B
Rode Lavalier Mic: amzn.to/3IMZ7Eq
Garage
QuickJack 5000TLX: amzn.to/3qIr61T
QuickJack Pinch Weld Blocks: amzn.to/3LenvR0
Michelin Tire Covers: amzn.to/3tNvfU6
AOBEN Impact Wrench: amzn.to/3LjMGS8
Pro-Lift Jackstands: amzn.to/3wPjnTt
Jackstand Lift Pads: amzn.to/3OjKhsV
Lexicon Impact Socket Adapter: amzn.to/3LjMMcs
Neiko 01148A Hex Power Bit Set: amzn.to/36x3NkS
Auto Trim Removal Tool Set: amzn.to/3Mi7eeu
LED Headlamp: amzn.to/3rAUXtw
#GrimmSpeed #BPV #WRX #subaru #fa20 #2018wrx - Авто/Мото
Awesome job capturing the audio. This video gives people a good idea of how it will sound in their vehicle. Appreciate the effort!
Thank you, glad you like the video! I wanted to capture the BPV’s natural sound without putting a mic in the engine bay. The BPV sounds amazing 🔥
i just wish i could get mine lol ordered in may and now its jumped to august 15th lol
This literally made my decision, thank you
Sounds dope as heck my guy! It’s got that great flutter I love to hear! And you be whipping that car around like a pro!
Thanks man! It sounds more refined than my previous setup.
I learned a few things from Assetto Corsa 😂
love the videos man, been watching to help me pick parts for my 2015 Forester XT. cool to see someone from my neighborhood having a great time in our June rain haha
That’s what’s up man! I like our area a lot. It still has that low key feeling to it. See you around 💪
Just installed my GS inlet and BPV. Watched your install video and was very helpful!
That’s what’s up man! 🔥
Great video man. Goes a long way in helping me decide on what I want to do.
Thanks man!!
Sounds so good 🙌🏽
🔥 🙌
I finally found it. This is how my car sounds. 2016 wrx
Pure red gang🤙 great video bro
Thanks bro!
Soon as the BOV spits it had a slight hint of a hunter from halo before the stututus and I absolutely love that. My brz is set up similarly but u fortunately doesn't sound quite as aggressive on the initial letgo
I’m sure your BRZ still sounds good! 🔥. I had a BRZ right before the Rex. Hoping to get another one someday.
I like the Stustutustu on the Grimmspeed more than Nameless. Good stuff man.
Same here man! It sounds more refined 🔥
Those flutters are music to my ears!
Couldn’t agree more! 🙏🙌
I just installed both the GS BPV and Turbo Inlet and don't get any additional swishes or more aggressive sounds, this is probably because I have Cobbs Redline Intake vs the one you have. At least I replaced the plastic OEM parts with better quality materials for longevity.
How are you liking or disliking the Velossa big mouth intake add on?
Wow, that’s hard to believe. Not sure how different the redline intake is from the big SF but I would’ve thought that swapping out the turbo inlet alone would change the tone a little.
I finally got mine installed but sadly no fancy woosh sounds with the OEM intake. I am also running TGV and EGR deletes so no longer can get an updated tune. So sticking with what I got for a while. 😬
I know the feeling! I bought a Grimmspeed intake but I can’t use it because of the deletes.
Where did you buy the side engine covers from ? I am referring to the sides with vents cutout
They are the Compressive Tuning Air Blades ruclips.net/video/HA4-DIRksTo/видео.html
Installing mine today! LOVE the sound! Hope I dont haave any issues tho!!
Got it in went for a test drive and during a wot pull, blew the top end of my charge pipe right off the tmic and nearly shit a diamond.... luckily I think the clamp was just loose, and nothing is broken. Tightened it up and she seems to be running like a gem today!
Happened to me before and I know the feeling! Glad it’s running right!
@ronfromportland your videos are huge helps so thank YOU!
What intake are you running? My induction noise is already quite loud with the Cobb SF Intake so I can’t wait to hear even more great noises when I put on the GS Inlet and BPV this weekend
Same as you, the Cobb Big SF intake 👍
@@ronfromportland So I tried to force the inlet into place after not cutting enough of the red silicone tube.. ended up breaking off the head of one of those 10mm bolts. Needless to say the extraction was strenuous but finally got the car up and running. Sounds great haha
@@MikeyBestSparky sacrifices! Glad you got it up and running! 🔥
@@ronfromportland did you have to tune for the intake?
@@caxtt7938 yes, for sure!
i just got my bpv. same one. can you push in the brass part on the inside?? do i have to do any adjustments to it before i install? thanks in advance
It’s very hard to push but yes. No adjustments needed!
May be wrong about this.. but isn’t the flutter bad for the turbo? Thought it could create shaft play easily with the stock turbos. Is it not as serious as people are saying?
I think you’re referring to compressor surge which can be unhealthy for the turbo. This is just the sound of the BPV/EBCS.
Damn sounds good
Thanks man!
@@ronfromportland I have the turbo xs hybrid. I love it though
Car sounds mean!
did you have to tune for it?? i have the cobb sf intake along with the invidia dp. i’ve been told i can toss it on without a tune is that true??
It’s not required but it’s probably for the best.
Thank you all for checking out the video! 🙏
So do you have to have an intake in order to have the flutter sound?? And do you have to tune it so the new bpv can be “reliable” ?
Some folks have achieved that sound without the intake but it’s recommended to have the full effect. Just be careful. Some say flutter is bad and since my turbo blew, I agree. Always tune when you can. My tuner said retuning wasn’t required for the BPV.
Who’s got these in stock :( I want it for my 21 STI
do you need a tune or any specific modifications to run this bpv??
thanks
Nope, you should be able to bolt it right on.
Good stuff man. Curious to hear your thoughts on it from a performance perspective, and also what differences you noticed from the nameless to the GS.
Stay after it 🤛
Thanks man! Definitely will make notes of the changes I notice. Need to drive it for a few more days to be able to confidently speak on it. 💪
@@ronfromportland Lets hear the thoughts Ron! Great video as always brotha
@@dylanmwoods thank you bro! 🙏
So i want this flutter on my 18 WRX do I need the SF intake to remake it or is the inlet and bpv enough?
I’ve been hearing that the V1 of the BPV flutters and the V2 does not, which is probably for good reason. Definitely + intake for the full effect though.
I work for subaru those send a dtc for lean code if it's not tune properly. It doesn't work for cobb access for over the selves tune. It will void warranty. We can see it on CID And CVN if it was tune.
Good info! Thanks for sharing, I’m sure folks would find this useful.
Question did this require any additional tuning for you? I’ve been looking at one for whenever my 2020’s warranty runs out and I actually start throwing parts at it.
Nope, I didn’t retune for any of this 👌
@@ronfromportland Alrighty one more question, if I was to put it on stock just for the sound factor do you think one would get the same results and Stu Stu Stu sounds?
@@Anonymoose0913 you’d most likely need an intake for the sounds
@@ronfromportland Update for you. Warranty is yeeted, just ordered intake, anxiety port, Grimspeed BPV, 4th cylinder cooling mod, and a Cobb Lava turbo blanket 😂😂
@@Anonymoose0913 that’s what’s up man! You’ll enjoy the car so much more!
Actually sounds like turbo surge. Very similar.
Ok this may be a stupid question, but when I am in neutral and give it throttle I get no boost or turbo sound. How do you get the bpv sound while sitting still?
Clutch in, 1st gear, then rev and let off
Just installed mine yesterday 10/11/2023 and noticed my peak boost went up .4 did anything like that happen to you? Mine is install on the oem inlet and intake, so no noises 😢. Is the whooshing noise due to aftermarket Cobb sf intake? Sorry this is my first subi.
What’s up man! My tune always had higher than normal boost so I didn’t really notice any difference with the BPV. .4 is nothing and I wouldn’t sweat it. A lot of it has to do with your driving style too. The intake is the main noise maker here. I would recommend checking out Grimmspeed for that. The Grimmspeed turbo inlet added more noise on top of the intake which is what you hear in this video.
I have the Cobb stage 1+ SF intake and tune and it allows you to hear the BPV. The grimmspeed BPV is just louder with a sweet sound.
Does the inlet really increase the induction noise?
Yes, at least for my setup it did! ruclips.net/video/kCYlrdjLcVY/видео.html
Aren’t the flutters bad for the turbo? Or am I just making this up
You’re not wrong!
is this the v1 or v2 of the grimmspeed bpv?
V1
Most of the cool sound comes from the intake.
Is a tune required for BPV install?
Not supposedly
Question, is this without an intake? Or with an intake?
This is with the Cobb Big SF intake. Here’s a little mod overview video I made, check it out if you get the chance! ruclips.net/video/F71yQdIO9lM/видео.html
@@ronfromportland did the grimspeed BPV need a tune? The Cobb one didn't. Im trying to get all grimspeed parts.... right now my car is like wearing nike and adidas LOL
@@BaconNDCheese totally understand haha. Nope, didn’t need a tune although every part you install may benefit from one.
Does it fit a 2019 wrx base?
Yes
I always have been told if you hear flutter like this it's turbulence and will cause the turbo bearings to fail quicker.
Yup, that’s true. But what you’re hearing is the BPV itself and not compressor surge. Big difference between the two. Thanks for watching!
@@ronfromportland keep hearing contradicting things. I would really like this bpv if what you say is true. Thanks!
@@MJCCJC22506 ruclips.net/video/oMVnACnadYs/видео.html
Turbo flutter. Bad for your Turbo but worth it or just fine for your Turbo?
Not saying it’s directly related but…lol. ruclips.net/video/_Zm8GN-1_jY/видео.html
sounds the same as the boomba... thats what ive been running 2021 wrx
Yeah I agree, they sound similar.
Why are you in a hurry?
The video is to capture the sounds, not an in-depth install. ruclips.net/video/5XG5tG2TK04/видео.html