Great video, easy to follow steps. Have you ever fitted a 700x500 skymaxx at the rear? We have a L2H2 and currently plan to fit the larger skylight above the bed. Just trying to find confirmation it will fit ok between the roof structural beams and not overhang the rear of the van.
You could tape a bin bag or similar to the inside roof to catch the swarf from the cutting, popping a magnet in the bag will catch it as you cut. If a magnet isn't to hand then a squeeze of mastic on the middle of the bag will catch most as the vibrations will cause them to move towards the centre.
Thanks bren that’s a great idea. We used to do put a plastic liner underneath to capture it but some always escaped and it’s still all over the roof so know we just cut all the holes and then do a deep clean
HI STU 😁 Great videos very informative ,maybe you could include the van build total weight as a lot of van builders dont show what the van comes in before passengers and fuel/water etc... Most van builders go over the TOTAL 3500kgs . Your builds with lightweight ply are all on spec but most home builders are using heavy PLY AND ARE RUNNING OVER WEIGHT.... Wishing you all the best with new business. 👍
That’s very true mate, our first van weighed 2640kg unloaded so had a fantastic pay load, the grey Ducato we finished in February weighed 3160kg completely loaded including fuel, water and garage loaded so very pleased with our vehicle weights after conversion 👍🏻👊🏻
Thanks for this, it's perfect timing as I have to replace one of my skylights thanks to a stupid pigeon headbutting it and smashing the "glass" plus part of the frame. Itvwill be the same process but the hole is already cut and the wood frame is in place. If it wasn't I would hold the frame with some clamps as I don't have props.
Hi Guys. What a shame weather in Spain video. Yes your new van is superb but way too long for me. My ex sainsbury supermarket delivery van is keeping me busy converting it. Been fitting doors. May I ask what your insurance rushes u. I got my sprinter 314 cdi 2018 for 440 with Adrian Flux. Value after conversion 15k. Good luck with yours. Now going to watch another video by van ology, don't know who that raskel is do u. Really love your videos. Best wishes to u and your wife. Also u have very well beh children. Best wishes David and Beverley Norfolk
Thanks mate, with solar it’s a case of get as much on the roof as you can fit. If there is two skylights we use our 445w panel but if only 1 skylight we can get 525w +
Hey Stu, great informational video. Just got my 50x70 skylight for my boxer and will be fitting it as soon as it gets a little bit warmer around here. Just a question, might be stupid, but after cutting the hole and filing it, you mention that you threat the bare metal, what are you using to threat it? I have got hamerite but the text said you threat it before applying hamerite so just wondering what to use. Thanks and keep it up, can't wait for the next how to video!
Thanks mate, I applied a primer to the bare metal. You can just apply the hammerite straight to it. I then applied the hammerite afterwards with about a 10mm overspill both sides 👍🏻🚐
@@VanologyConversions Thank you, much appreciated! Probably watched all of your videos by now in preparation to gain some confidence in building my own camper.
These are the type of videos you do best. Keep them coming 😊
Thank you 👍🏻🚐
Now that’s how to produce a installation video well done.
Thanks mate 👊🏻🚐
👍 👏👏 The crowd cheers for more ✅
They’ll have to wait til next Tuesday 🤣👊🏻🚐
Great video, easy to follow steps.
Have you ever fitted a 700x500 skymaxx at the rear? We have a L2H2 and currently plan to fit the larger skylight above the bed. Just trying to find confirmation it will fit ok between the roof structural beams and not overhang the rear of the van.
It's as easy as that, cheers Stu, hope you guys are enjoying your holibobs,
Thanks guys, had a great time with the family, the weather was poor but we made the best of it, just got home 👍🏻🚐
Great vLog. That workbench is already taking a beating 🤣
Thanks mate, they don’t last long lol think the next top I put on it will be mdf as it’s cheaper 🤣🚐
Great tutorial Stu , more of these please
We’ve got a series lined up of just how to vids, we will put them out along our normal videos 👍🏻🚐
You could tape a bin bag or similar to the inside roof to catch the swarf from the cutting, popping a magnet in the bag will catch it as you cut. If a magnet isn't to hand then a squeeze of mastic on the middle of the bag will catch most as the vibrations will cause them to move towards the centre.
Thanks bren that’s a great idea. We used to do put a plastic liner underneath to capture it but some always escaped and it’s still all over the roof so know we just cut all the holes and then do a deep clean
HI STU 😁 Great videos very informative ,maybe you could include the van build total weight as a lot of van builders dont show what the van comes in before passengers and fuel/water etc... Most van builders go over the TOTAL 3500kgs . Your builds with lightweight ply are all on spec but most home builders are using heavy PLY AND ARE RUNNING OVER WEIGHT.... Wishing you all the best with new business. 👍
That’s very true mate, our first van weighed 2640kg unloaded so had a fantastic pay load, the grey Ducato we finished in February weighed 3160kg completely loaded including fuel, water and garage loaded so very pleased with our vehicle weights after conversion 👍🏻👊🏻
I thought this vlog was really good at explaining & showing the different steps of fitting the skylight. 👌😊
If it helps one person fit their sky light I’ll take it lol thanks guys 💙🚐
ACE VLOG Steve helps as I've one to go in and one to replace 1st time
Also have you tried a spray called Elbow grease on Google it's unreal and £1.50 . Shift any mingin green roof
I haven’t heard of that one, to be fair the two cans we got here have really bad roofs so they went outside to meet the jet wash 🤣
@@VanologyConversions 🤣🤣 yeah I spray that on then jet wash !
Good on oven fat too mate
What a great video. At a great time fitting my skylight soon was sh##ing myself about cutting holes. Video has help . Keep up the good work mate 👍
Thanks Dave, glad it helps that’s what it’s there for. If you need anything specific doing for a how to let me know 👍🏻🚐
Great video stu thanks for showing👍👍
Thanks mate 👊🏻🚐
Nice little video
Thank you 👊🏻🚐
Absolutely Mint 👌🏻👌🏻👌🏻
Thanks bud 👊🏻🚐
Not long discovered your channel ...its awesome! Thank you very much for sharing your knowledge and expertise
Thanks mate that’s what it is there for 👊🏻🚐
Great video. Straight Forward precise instructions. Thank you. 👍
Thank you, glad it helped 👊🏻🚐
Superb content , really enjoy how you break things down into easy to follow steps . A tip of the hat to you sir 👍
Thank you Neil 👊🏻🚐
Brilliant as per usual
Thanks mate 👊🏻🚐
loving it.
Thanks mate 👊🏻🚐
Wheres the link to the sky light?
perfect how too! always wanted to know how they were fitted properly.
Thanks mate 👊🏻🚐
Excellent. Well explained
Thank you 💙
Excellent video, well explained
Thank you Alan 👍🏻🥲
Nice work 🙂
Thank you 👍🏻🚐
Well done thank you good luck 👍👍👍 🏴🇬🇧🇨🇦🦢
Thank you 🏴🚐
Thanks for this, it's perfect timing as I have to replace one of my skylights thanks to a stupid pigeon headbutting it and smashing the "glass" plus part of the frame. Itvwill be the same process but the hole is already cut and the wood frame is in place. If it wasn't I would hold the frame with some clamps as I don't have props.
That made me laugh 🕊️ bet he got a head ache after that. Glad it will help you mate 👍🏻🚐
Absolutely loved this, presume the fixing screws are stainless steel?
Hi Mark, thank you. Yes they are mate, they are supplied with the sky lights 👍🏻🚐
Hi Guys. What a shame weather in Spain video. Yes your new van is superb but way too long for me. My ex sainsbury supermarket delivery van is keeping me busy converting it. Been fitting doors. May I ask what your insurance rushes u. I got my sprinter 314 cdi 2018 for 440 with Adrian Flux. Value after conversion 15k. Good luck with yours. Now going to watch another video by van ology, don't know who that raskel is do u. Really love your videos. Best wishes to u and your wife. Also u have very well beh children. Best wishes David and Beverley Norfolk
We love the market vans we’ve some brilliant conversions done on these, we are currently with comfort mate 👍🏻🚐
Where can I get similar prop sticks to yours? Thanks
These are plasterboard props that I got from Screwfix mate 👍🏻🚐
Very good vid thanks.... can i ask where I can get the adaptor plates from please?
Hi Dave, I get them from magnum Motorhomes 👍🏻🚐
Great channel and great conversions do you know how many Watts solar would be needed to be totally off grid in uk and also size of batteries .. thanks
Thanks mate, with solar it’s a case of get as much on the roof as you can fit. If there is two skylights we use our 445w panel but if only 1 skylight we can get 525w +
@VanologyConversions thank you I'm getting a mwb ducato so I'll get as much as I can, thanks for the reply !
grt vlog
Thanks Phil 👍🏻🚐
👍😎
👊🏻😂
Hey Stu, great informational video. Just got my 50x70 skylight for my boxer and will be fitting it as soon as it gets a little bit warmer around here.
Just a question, might be stupid, but after cutting the hole and filing it, you mention that you threat the bare metal, what are you using to threat it?
I have got hamerite but the text said you threat it before applying hamerite so just wondering what to use.
Thanks and keep it up, can't wait for the next how to video!
Thanks mate, I applied a primer to the bare metal. You can just apply the hammerite straight to it. I then applied the hammerite afterwards with about a 10mm overspill both sides 👍🏻🚐
@@VanologyConversions Thank you, much appreciated!
Probably watched all of your videos by now in preparation to gain some confidence in building my own camper.