Это видео недоступно.
Сожалеем об этом.
How NOT To Install A Jeep Wrangler Slave Cylinder
HTML-код
- Опубликовано: 22 июл 2016
- Please watch: "SYMBOLS OF FREEDOM"
• SYMBOLS OF FREEDOM -~-
SUPPORT THIS JOURNEY:
www.patreon.com/user?u=307938...
MUSIC:
A Long Cold by Riot from RUclips Audio Library goo.gl/YmnOAx
FOLLOW ME:
Facebook: / iamjakebookface
Instagram: / jakewettern
Twitter: / jakewettern
I know what a bummer it is to have your vehicle out of commission but you made this vlog supper uplifting still
I freaking love your vlogs! So inspiring to me! :D
Really enjoyed that vlog!
When putting in the roll pin, squeeze the side that's going in first just enough to were if you smack it it'll go I the hole. Then it won't gaze the sides of the hole
I freaking love your Jeep and your vlogs. keep it up bud! :)
Thank you Andrew!
Dude that was fun to watch!! I wonder if you have other vids......I would like to laugh at them too, it was funny, in a good way!
pg Ridout - Thank you!
I watch all your videos the are always good keep doing what your doing
Hi Jake! : D Love the sippy cup story! And I've got positive thoughts for a speedy recovery for Jade. Odd ball question...what is your necklace? I watch on my phone so can't see it up close. It's really cool..thumbs up! p.s. lol on the banana pancakes post-it!! :)
Another good one Jake. Thank you.
Awesome video like always! I would love for you to come to L.A. Or Orange County one day
you're life is so cool!! I wish I could meet you but I live in Indiana :/ you're an inspiration to me and I can't believe you don't have more subscribers because your videos are very good
feeling pretty excited for you to visit Michigan!
That sticky note made me bust out laughing, and then you trying not to laugh because of the obvious made me laugh more.
Jake you can file the outside edge of the roll pin end so that it is tapered and kinda pointed so it starts easier... you prob already have it done by the time I am posting this. Keep up the great clogs!
I’m so glad my slave cylinder went out and you uploaded this video! Where is the marina located? When you were dragging the magnet I observed what appears to be a 1989 Yamaha XT350 under tarp.
You probably already got it fixed, but for future reference, pinch together the roll pin a bit with needle nose pliers as you drive it in, but also important use a good solid flat surface, something like your front bumper would probably work good.
Watching you drop all those steel shavings into the carpet of Gil’s car... next time Gil grabs something out of his trunk, poor Gil.
Thanks for sharing your sippy cup story! Just keep telling yourself "everything happens for a reason"
Dude using Eiffel 65 is genius! Sticker looks good, I prob have like 20 stickers on my jeep. I've come out from shopping and have people taking pics of the different ones, or I'll have people getting next to me at a light and reading them then laughing. Keep on Keeping on!
Keep jeeping jake!
I love your vlogs man
Thanks Carter!
Can you replace the roll pin with just a nail or rivet? Probably would he good enough
can you show us you making your food and the behind the scenes
I think younare fantastic and I love watching you fixingbthings
Thank you Keith! Welcome to my channel great to have you here!
the ace hardware i work at has roll pins in a pull out on the bolt isle. but you proabably have already fixed it. :)
awesome vlog! loved the sippy cup story haha
Thanks Megan!
same
Now I get it!
Jody Mead haha
gotta learn one way or another and I've been thinking about a paint color for my 4runner in thinking the color of,your jeep with white bumpers,and fender flairs
either way bro jeep up the good videos love seeing these everyday.
Dude you are AMAZING!
Okay I’m having this problem rn and I did everything you just did buttt how did you bleed the system once you put it back on your Jeep ??? Did it have a bleed screw did you buy one the new slave I bought and old one did not have a bleed screw
I think I saw you today on my way back home from astoria! Do you have a red jack on the back of the jeep?
lol yo sippy cup, if u come to maui hit me up... love da vlogs bradduh
Ace should have the pins while you're there grab a c clamp. You can get the pin started like you did then put the clamp on and slowly tighten it till the pin is all the way in.
It seems like you're experiencing what my friends and I call Jeep Time haha, take your expected project time, and add some extreme amount of extra time, such as 2-3 days and that's your real project time! Anyways good luck, hopefully the auto parts store has what you need!
Watching you try to drive that roll pin in on those rocks bugged me. It's my days as a mechanic coming back to me. Always use a flat surface!
I would of thought that he would have had the roll pin pressed in at the parts store he bought It at. Just a thought.
+flex93312 Almost no auto parts stores offer that. Most have a very basic set of hand tools they will loan you. I always prefer small non-chain auto parts stores because they will help you with stuff like that.
+tyhoe The ones around here do, I guess it's where you live at that dictates which stores will offer tools and vises to use. For example, I had to buy a 6" drop down hitch and a 2 5/16 ball one day, and I asked the employee if they had a vise I could use to mount the ball to the hitch. He said yeah and took me to the back of the store where they had a vise on a table, with other hand tools, i.e., pipe wrenches, etc.and a compressor with air tools. So maybe it's just this area cause it's a small community and there are a lot of farmers around here.
Very frustrating to watch.... And fully expecting to have everything go wrong. Actually thought you were going to drill through Gibbs trunk. Definitely I expect a sippy cup moment to happen all the time.....
tyhoe i thought the same thing instanly the moment he did that yhe first time... All that vibrational instability
8:16 Love the positivity Jake!
hey Jake...have you ever thought of making a road trip up to Alaska or driving up there in near future?
Yes I'm currently prepping for a 50 state multi year road trip! Yes Hawaii and Alaska included ;) very excited!
Jack r you coming to Seattle WASHINGTON on your first journey
Those punches are almost disposable, these days, and often break when removing pins. I usually just grind the point flat again. As far as installing the roll pins goes... it's easier (and safer) to use the butt end of the punch or a large Phillips head screwdriver. You're much less likely to spread the pin and make the installation more difficult... if not inpossible.
hi Mate, you need to place something solid under the cylinder when you install the new pin like a block of wood, don't try to do it on the gravel in the car park, good luck
Gotta love that there is another YJ right next to him.
Same thing happened to me but mine was a radatior hose clamp. I couldnt find it so i just zip tied it i was like screw it 😂😂😂
Another entertaining blog
*Vlog stupid auto correct
haha
Lol you need to squeeze the roll pin to get it started sippy
what camera are you shooting on now?
I know this is months later but you're killing me as I watch you try to beat those roll pins in with a hammer on gravel. For future reference, get ROLL PIN PUNCHES. . Also most roll pins are tapered,so beating them into place with a hammer widens the pin face. My .02.
How long does it take you to edit?
You're Awesome.
And they let you work on jets? Yowza
Hmm looks like you need a different sticker; eat, sleep and sippy for the moment 😛
Haha I'll get one made! ;)
You live in such beautiful country!!!!!!!
I can't believe you didn't break that drill bit drilling that pin out. You must have owed a debt to karma for getting that lucky and had to lose the other pin to even up.
Just praying you get jade fixed man!
This is the last vlog I see till I get back in 2 weeks, cya later Jake!
Best of luck at cadet training! C ya when you get back!
iamjake Thanks Jake, I wish you safe travels till I'm back.
Also what song is that?? I need to put it in one of my vlogs!
It's by Riot! It's in the description! I'm really liking their music!
Appreciate it man! Always looking for new music! And of course no problem!
Can't wait for 24 mil
sippy cup, sounds like you suffer from ... wait ... squirrel!
Say the Saint Anthony prayer, "Tony Tony turn around somethings lost and must be found"
Hey Jake. if you ever get back to Wisconsin in your jeep. I have been a Mechanic for 30 years. I have a lot of extra tools and young guy like you could use. I am the guy who lives near Waupaca. We have a bridge like that near Gills Landing near Weyauwega. But it does not turn anymore, it is lifted up by hydraulic pumps now. Anyways Good luck with a jeep. I hate jeeps but oh well. Good karma guy.
Really appreciate it thank you! I'm from New London originally and my dad and many friends still live there. Been to Waupaca and Weyauwega many times. Love having more Wisconsinites following me! Great to hear from you and thank you for your support!
Shit is just getting started and its getting interesting
Love the Channel! But it couldn't hurt to blur out license plates
Love the vids when you get the part you just should hammer it on concrete
Good blog. Not good for helping me answer the tiny question I had about my slave cylinder placement 😂😂😂
If you weren't supposed to be up there why did they put a ladder there? haha
The project jeep I'm working on, the slave cylinder is welded on a lawnmower blade sandwiched in the bell housing lmao
quick question, how much stuff do you lose from spontaneously throwing it ha-ha
Eat. Sleep. Jeep. I want a sticker like that
I love being able to make my own favorite foods, keep eatimg those banana pancKes!
i just put a clutch in my 1994 samurai
Get on with it!!!
How much would it be to get it serviced professionally?
But I know you're on a budget so that might not be an option :/
If I had to guess somewhere between $180-$350, all depends if he only needs the cylinder or the entire assembly plus labor cost around his area. .
Naa... You're pretty high on that. It's less than an hour job and you'd have to go to a big time ripoff shop to have to pay more than $100 to have the part put on. The part is going to cost whatever he paid for it.
It's 2 bolts and 2 pins each way, and then bleed the clutch. It's really not a hard job. Jake just isn't very well prepared with his tool inventory, "shop", and experience. There's only one way to get the last one, so it's all good.
That's parts and labor, also depends if he needs just the cylinder, or the entire assembly. I went off $85hr labor and did 1hr for just the cylender to 1.5hrs to the entire assembly
GaynNovi
To do exactly as he is doing, I think the low side of your estimate is pretty close for parts and labor.
hahaha love ur videos sippy cup lol
Who drills out a hardened spring steel pin pressed in aluminum??? The bit will try to go around it in the softer metal. LOL
Channel locks would have saved your bacon for getting the pin in.
Sippycup guys are cool
i would have cut the end of the welding rod and used it as a pin
crazy
Have you ever thought of dropping the tools and competing in a TV reality show? Thats what you're made for.
What your adress, I would like to send you a sippy cup sticker for your service ;) Future reference buy a roll pin starter , and use a solid surface for driving the roll pin in. like when I am working on M16s, spring fly everywhere, unless you use the appropriate tools, or make a tool to work. One other thing, you could have broken you punch off in the roll pin hole and it would have worked temperately till you got a real roll pin.
Awesome! LOL!
Haha you're great
ride the dirt bike
Please dont watch this as an instructional video on how to replace a jeep slave cylinder if you want to have a running truck when you're done.
You should honestly get a more reliable car....
im a fellow yj jeep owner and i am going to tell you something my jeep is affordable if it breaks down i can take it literally anywhere i want it to go and they are extremely fun to drive my jeep currently has 375,000 miles on the original motor and rebuilt transmission that piece that he had to replace is $30.00-$40.00 and usually really simple to replace
I stopped to watch this movie , when you tried to put the pin in the stones . Is too much for me .
you will make some a great boyfriend then husband one day wish i was young again I might stand a chance with you
🤣👍
What a goober haha
👌🏽🍼
Dude could you put comedy in the headline? Some people are in the middle of changing a slave cylinder and I just clicked on bcc I’m struggling with the line and couldn’t find any vids of someone taking it out. I figured it would be the joke then say this is the correct way. Anybody can kick tools and talk about ettimg drunk at a fucking bar. Idk how this got any likes or how people are saying this is funny. Literally anybody could do that
What a waist of 10:23
Talk to much
Ho cares talks to much
Wasted my time watching