Love the progress on Wild Bill and looking forward to the next video. Interestingly enough there is another Ford pickup that looks just like Wild Bill on a Rustomod episode from 2 weeks ago. He is currently placing a C-60 cab on a Silverado frame and built a killer Rambler station wagon on a corvette frame. Very jealous of the new gasoline can that Hanna received as my dad had one like that when I was growing up. Which I now appreciate but didn't at the time. out!
Awesome progress guys coming along very well yall !!!!!! As always an awesome adventure great content and the song was kiss 1979 I was in my late teens and was rocking those songs like a rock star 😂😂😂😂😂😂😂😂😂😂
Hey Cory.... If you can find an old oxygen bottle / cylinder, that has the concave type bottom... cut it down and flip it upside down...they make great rounding / forming stumps.
Cory, you are always looking at low budget, perhaps a stall mat from tractor supply? it is made of rubber, comes in a 4x6 roll, and is 3/4 inch thick for around 50 bucks. A perfect flooring for any project
You will make straighter lines if you pull the plasma towards yourself. I predrill a little hole in the corners so I dont have a bun hole.Stand to the side. This goes with chalk lines, not grinders.( unless you enjoy sparks burning in your cloths).
The little lantern is a flashlight/ lantern. Just pull up for lantern and down for flashlight. Had mine for 25 years or so. Sure like following you two. Keep building for the lord
U can put the kill mat on the outside to kill noise.. i did it on big truck. I ned to get new rubber floor for inside.. ima put kill mat on inside under rubber flooring..
Looking forward to meeting you at the Starbird show in Tulsa. Thats always held on my birthday week and its a tradition to go since I moved to Tulsa in 2001. Great Show!
Good neighbor to come over and plow your driveway and the truck is coming along nice. I’d go with bedliner on the floor boards that way you can just open the doors and hose it out and besides who wants to carry on a conversation with the wife in a road trip.
I'm definitely going to get to Oklahoma to that show to meet ya !! I'll have to bring my mini Toyota monster 4x4 and show it off !! Snow is headed to Texas tonight so I'm going to get to enjoy playing in it like y'all were ! Good video !!
That song you keep trying to say was performed by a rock group from the 70s called kiss yes I said rock group the 70s had the best music I’m from the 70s in fact I’m from the 60s. I’m 63 years old today. Well next week technically I’ll be 63 but that was a kiss songand I don’t even think I was a teenager when that song came out. I got it correct this it came out in 1979. I was 17 years old. And the song is called I was made for loving.
I'm like back seat builder, hehe, I think there was a 1 inch upper support under the old piece you took out, prevents the drop down of the forward plate pressing on the exhaust muffler. May think to add one. I probably would have sanded that side lower inner rocker panel, was looking like easy access when you cut that piece out. And got some paint on it after getting the surface rust. There us that rubber adhesive sound proofing Matt you can add. Fir sound deadening.
Just my 2 cents but have both sides of the floor bedlined this way it can't rust. Then if you want you can laying down sound sound deadner then carpet.
You could always put some kill Matt and some insulation down and put like a work mat out of like an old Chevy pickup truck and cut it to fit so that way you can have a vinyl floor in it
Corey needs a giant vise and an anvil, that would improve your fabrication skills big time. I have a very giant vise for you if we could figure out how to get it to you from Milwaukee Wi
@corywheatcustoms they adjust 1/2" or 1" if i remember right, i ran them on my k5 rock crawler when it was on Leaf Springs. i really dig your cummins crawler. Keep up the good content, cory, and hanna!
Hahaha loves this "wild bill" came from my old man bill Miller. He just called me and told me to watch the episode hahaha. You guys kick ass thank you for the build.
Home depot has some heavy vinyl so also pickup a roll or 2 of heater stick on insulation put that down 1st then the vinyl it will look clean & give you comfort
KISS Music. I love it . I'm Likin the dance moves. Ms. Hanna . Corey on the mic, 👍 you need to make more videos and make them longer. We really love them.
Hey there guys I had a thought on a solution to lining the inside of the cab and dynamat and all that jazz. There is a product called lizard skin that is quite cool. First it sprays on like bed liner deadens the sound kinda like dynamat and can be painted over to match whatever color youre after. On another benefit of it is it is ceramic based and water soluable so doesnt take any spray booth and easily cleaned after app before completely set and it has insulative properties so in the summer time it will help keep the inside of the cab much cooler and in winter time it should help hold heat in cab so heater keeps up way easier. Im fairly sure that there are other places to get it but I know I found it at eastwood restoration products. Hope this aids in your decision as to how to deal with it.
I have the same Mayor license plate. It came on my 2002 Dodge truck. First year for the new body style of the 1500. Dodge was running an ad campaign that the truck was the Mayor of truckville. I still have the truck and the plate.
Hi , LOVE THE SHOW IT IS GREAT . CORY WHY DON'T YOU USE THE FORK LIFT BLADES AS YOUR METAL BREAK AND YOU CAN PUSH DOWN ON THAT , IT IS JUST A SUGGESTION MATE .
You can still put a couple layers sound barrier on the floor and then put your bed liner on top of it so you will have the best of both worlds or you can put your sound barrier down aluminum diamond plate on top and then your bed liner on top of aluminum diamond plate
37:35 Back again: believe it or not, as a safety measure, packing peanuts are, in fact , now plant 🪴 based. Not harmful not toxic. So freak out but nit too much.
Really like y'all's build videos! Wild Bill is very cool! Excited to get to meet y'all at Tulsa!
Howzit Hanna and Cory, awesome vids...much love from South Africa.
Love the progress on Wild Bill and looking forward to the next video. Interestingly enough there is another Ford pickup that looks just like Wild Bill on a Rustomod episode from 2 weeks ago. He is currently placing a C-60 cab on a Silverado frame and built a killer Rambler station wagon on a corvette frame. Very jealous of the new gasoline can that Hanna received as my dad had one like that when I was growing up. Which I now appreciate but didn't at the time. out!
Love watching progress on Wild Bill. I remember the truck sitting in Bill's yard.
Enjoyed the clip of you guys having fun in the snow with your rides. The mini music video was cool too.
Good job and video Homies. I would spray truck bed liner first and then add the hush mat and then black vinyl floor
Classic 'KISS,' they were my first concert back in 1997'ish. A bead / seam roller would be pretty handy for those floor pans. Happy New Year! 👍😁
hannah i liked that joke about ellen notso generous [minnie ha ha ]
Love wild Bill...I'm the original Nashville wild Bill welder Stevie lol 😅😅 love this
Great progress on Wild Bill. Can't wait to see Wild Hannah driving it.
Awesome progress guys coming along very well yall !!!!!! As always an awesome adventure great content and the song was kiss 1979 I was in my late teens and was rocking those songs like a rock star 😂😂😂😂😂😂😂😂😂😂
Hey Cory.... If you can find an old oxygen bottle / cylinder, that has the concave type bottom... cut it down and flip it upside down...they make great rounding / forming stumps.
That’s a great ideal !!! Thank you so much !!!
We would love to see you cutting and welding everything! Not boring at all. I think you should show way more of your ideas and work
That was an amazing idea you come with I will have to remember that great idea what yah do is always amazing keep it up love it
Wild Bill is looking good. Can't wait to see it all done.
Love to see all the work
You can use your plasma to cut parts of your bend lines ( think dashed line) to make it easier to bend then weld up the cuts after it’s bent.
You should look into insulation for your shop. 😂 love what you guys do.
We just picked up an old metal brake this week cuz we’re doing floors, firewall, and trans tunnel in the 41 Ford. Handier than a shirt pocket.
I need to get one !!
You two crack me up every time I watch your videos
Great vid you two.hope to see you all at the rod runs in pigeon forge,we already have our cabins booked for both events.
Truck is Coming along nicely and Good video Corey and Hannah
Cory, you are always looking at low budget, perhaps a stall mat from tractor supply? it is made of rubber, comes in a 4x6 roll, and is 3/4 inch thick for around 50 bucks. A perfect flooring for any project
You will make straighter lines if you pull the plasma towards yourself. I predrill a little hole in the corners so I dont have a bun hole.Stand to the side.
This goes with chalk lines, not grinders.( unless you enjoy sparks burning in your cloths).
Straighter than Ellen🤣🤣never heard that one before.
I like seeing you all work in the shop and fabricate parts and build project vehicles.
The little lantern is a flashlight/ lantern. Just pull up for lantern and down for flashlight. Had mine for 25 years or so. Sure like following you two. Keep building for the lord
Keep up the good work. My Wife and I both like watching the Hannah Wheat Customs. Lol.
Hey !!! Glad you guys like it 😎
Yah can’t wait to see wild bill in action 👏👏👏 Love you two Love bugs ❤️💙
Keep up with the good work and good luck and be safe and God bless you guys
The new shop truck is coming along very good. Good show tonight.
Guys as usual another awesome video really really enjoyed watching y'all man really love your videos thank you for sharing
Cory use seam sealer on all of the joints that's the way the factory did it
Thank’s for the video, really enjoyed it ✌🏻❤️
U can put the kill mat on the outside to kill noise.. i did it on big truck. I ned to get new rubber floor for inside.. ima put kill mat on inside under rubber flooring..
Kiss, 1979.😂 I was 17 yrs old . Great band and music.❤
With any vacuum you have to clean the filter not just emptying the dust container.
Cory you worry too much about what people think , it’s cold and you need to stay warm !
No gloves is better than Sleeperdude , wearing flip flops !!
Looking forward to meeting you at the Starbird show in Tulsa. Thats always held on my birthday week and its a tradition to go since I moved to Tulsa in 2001. Great Show!
Another great video 👍👍
Wild bill would be creeping towards that heater like it was CHRISTINE!!
You have a lot of fun together 🤣 love your new project ❤️😉✌️
Awesome Intro!!
Enjoyed the dance off !!! cuz😂😂😂😂😂😂😂
Good neighbor to come over and plow your driveway and the truck is coming along nice. I’d go with bedliner on the floor boards that way you can just open the doors and hose it out and besides who wants to carry on a conversation with the wife in a road trip.
Look at the Lizardskin products. They offer a solution for noise and heat and a topcoat for a bed liner like appearance.
Since you guys like vintage stuff. Get yourself a Honda ATC 200 three wheeler. Really fun in the snow Thanx for what you do 👍😁
When Corey started singing it it brought memories back
Great video even better dance moves
Good video guys..👍
Appreciate it !!!
I'm definitely going to get to Oklahoma to that show to meet ya !! I'll have to bring my mini Toyota monster 4x4 and show it off !! Snow is headed to Texas tonight so I'm going to get to enjoy playing in it like y'all were ! Good video !!
Cory the pepperoni is made from Himalayan meat!!😅😂
Bedline ( for rust prevention ), sound deaden, _and_ carpet it.
always enjoy your videos see you next week
Leafblower guys 😂😂😂😂😂😂😂😂 will clean that mess up in a quick hurry 😂😂😂😂😂😂😂😂😂😂😂and the shop as well 😂😂😂😂😂😂😂😂😂
Love the truck 👍
I’ve got one of those red rectangular gas cans , they are unique
That song you keep trying to say was performed by a rock group from the 70s called kiss yes I said rock group the 70s had the best music I’m from the 70s in fact I’m from the 60s. I’m 63 years old today. Well next week technically I’ll be 63 but that was a kiss songand I don’t even think I was a teenager when that song came out. I got it correct this it came out in 1979. I was 17 years old. And the song is called I was made for loving.
That's one of the best songs kiss had out i was 14 when it came out
Good song live. I got to see them on their last tour. (I'm 22)
Sorry man but the best rock and roll came from the late sixties all of 70s and early to mid 80s
Still gave you a thumbs up though👍
Jaw dropped when she said “but we found a Rock version of the song “
It’s the only version worth listening to!!! KISS Army Baby!!!!!
I'm like back seat builder, hehe, I think there was a 1 inch upper support under the old piece you took out, prevents the drop down of the forward plate pressing on the exhaust muffler. May think to add one. I probably would have sanded that side lower inner rocker panel, was looking like easy access when you cut that piece out. And got some paint on it after getting the surface rust. There us that rubber adhesive sound proofing Matt you can add. Fir sound deadening.
We need a Grumman and c10 update video.
13:15 rust treatment and seam sealer then paint Corey you’ll never have trouble. Hope that helps
You could clamp a piece of angle iron and use it as a guide to cut straight lines with the plasma cutter. Love your content and you guys rock...🇨🇦👍
Just my 2 cents but have both sides of the floor bedlined this way it can't rust. Then if you want you can laying down sound sound deadner then carpet.
you can use a 1x2 board or some angle iron for a straight edge for dragging the plazma cutter to make your cuts straight
Love your videos
Straighter than Ellen Degeneres.😂
You could always put some kill Matt and some insulation down and put like a work mat out of like an old Chevy pickup truck and cut it to fit so that way you can have a vinyl floor in it
Plug some of those holes! Factory used Seam sealer! Weld through primer!
This is a cool truck
Corey wheat fashionista
I heard here in Kentucky that they are closing all the rural King's have you heard anything about that there
What no we ain’t heard nothing like that how sad
Use weld through primer,then use seam sealer to weather proof. Then undercoat .
Corey needs a giant vise and an anvil, that would improve your fabrication skills big time. I have a very giant vise for you if we could figure out how to get it to you from Milwaukee Wi
Wfo concept online sells an easy inch kit that bolts to your spring pack and has an off set cap screw for the center pin.
Wow I’ll have to check that out
@corywheatcustoms they adjust 1/2" or 1" if i remember right, i ran them on my k5 rock crawler when it was on Leaf Springs. i really dig your cummins crawler. Keep up the good content, cory, and hanna!
Like the snow but glad we don't have it here in south Mississippi 😂😂😂😂😂😂😂😂 great fun the mousetrap and groundhawg 😂😂😂😂😂😂😂😂😂
Y'all make good videos work play and have fun.😊
Hahaha loves this "wild bill" came from my old man bill Miller. He just called me and told me to watch the episode hahaha. You guys kick ass thank you for the build.
Hey thanks!!! I was just on the phone with him lol 😂
Looking good. Keep moving forward.
Moving forward, that is the important thing, nice
I was made for loving you by Kiss! I grew up listening to them
Home depot has some heavy vinyl so also pickup a roll or 2 of heater stick on insulation put that down 1st then the vinyl it will look clean & give you comfort
KISS Music. I love it . I'm Likin the dance moves. Ms. Hanna . Corey on the mic, 👍 you need to make more videos and make them longer. We really love them.
Hey there guys I had a thought on a solution to lining the inside of the cab and dynamat and all that jazz. There is a product called lizard skin that is quite cool. First it sprays on like bed liner deadens the sound kinda like dynamat and can be painted over to match whatever color youre after. On another benefit of it is it is ceramic based and water soluable so doesnt take any spray booth and easily cleaned after app before completely set and it has insulative properties so in the summer time it will help keep the inside of the cab much cooler and in winter time it should help hold heat in cab so heater keeps up way easier. Im fairly sure that there are other places to get it but I know I found it at eastwood restoration products. Hope this aids in your decision as to how to deal with it.
I have the same Mayor license plate. It came on my 2002 Dodge truck. First year for the new body style of the 1500. Dodge was running an ad campaign that the truck was the Mayor of truckville. I still have the truck and the plate.
That was cool taking the mouse trap in the snow
That fork lift with the panel clamped to it would have made a good break .
Hi , LOVE THE SHOW IT IS GREAT . CORY WHY DON'T YOU USE THE FORK LIFT BLADES AS YOUR METAL BREAK AND YOU CAN PUSH DOWN ON THAT , IT IS JUST A SUGGESTION MATE .
Real men don’t wear gloves unless they have to Hanna 😂😂😂😂❤❤❤😂😂😂❤
You can still put a couple layers sound barrier on the floor and then put your bed liner on top of it so you will have the best of both worlds or you can put your sound barrier down aluminum diamond plate on top and then your bed liner on top of aluminum diamond plate
Another awesome video
your so right Hanna, Cory's the one building it.
That song was by the rock band kiss ❤🎉
8:44 Kiss the Dynasty Album. It was as close to a Disco album as they would come up with after much pressure from the label. 1977
37:35 Back again: believe it or not, as a safety measure, packing peanuts are, in fact , now plant 🪴 based. Not harmful not toxic. So freak out but nit too much.
Its getting there
Most factories weld the floor pans overlapped. Best to be overlapped but not scooping air and water in. Butt welding is commonly used on outer body.
You need to grind the rust off so you can get a good weld. Why don't you cut and butt the welds Strong welds and no over lapping the steel.
Use a rubber bed mat, cut it to fit with the kill mat under it. That's what my hubby did in his semis. Then you will have the look you are wanting.
The song is from KISS
Got a link to the Rock version of that Kiss song? 🤣😂🤣😂
It’s by yungblud.. we like that version a lot better