DeLonghi Magnifica S Plus. Leaks water into drip tray when making coffee. Help needed!
HTML-код
- Опубликовано: 22 авг 2024
- I have a leak on my Delonghi Magnifica S Plus. ECAM 22.23X.
Water is getting from the steam mechanism into the overflow tank and then the drip tray when making a coffee or when the machine is rinsing. It is not leaking when I actually use the steam wand, that happen about six months ago and I fixed that. That was easy, just a plastic tube had come off. Please watch the video if you think you can offer help. Thanks in advance.
EDIT: I've also noticed a small amount of water in the coffee grinds 'bucket'. Any ideas?
I have descaled today to see if that would shift any gunk.
SOLUTION:
I brought a spare valve.
www.espares.co...
Hi guys, I thing i get the solution... I had the same problem with my ECAM23420 delonghi. It seems it's the oring (small black one) under the piece you show on 1:08 in your video that is the problem. I just replaced it and I don't have any leakage any more.
To see it you can remove the black part showed at 1:08. Then you'll be able to remove a white block with many orings.
When the white block is removed, you can see a pin with two oring. For me, it was the top one which was used. Water was going trough it all the time. It's the reason why you have water going back in the left tank and then into drip tray.
As I understand, the "pin" is used to remove pressure when the "coffee holder" goes back away. And when the coffee is pressed, the pin close the tank circuit.
Thanks for the reply. I will try again to fix it. Where did you get the spare part from?
@@andydjones3334 Did you mange to fix it already and get the right parts? I have got the same problem. It seems to be one of the rings in the white block (which you can carefully pull out), i just couldn't get the pin inside out. I think some of rubber rings there are worn down.
@@winia99 Sorry. Not found the time to repair. If it gets worse I will investigate. I'd give it ago if I have the new o rings in my hand. But don't want the machine out of order whilst I spend ages searching for parts.
@@andydjones3334 If it's just an o-ring, you should be able to find an equivalent pretty easily.
Here is the link for the www.ebay.com.au/itm/1xdelonghi-Ecam-Sealing-Set-O-Ring-Brewing-Unit-Sealings-/323761560971?txnId=2045046791011
Hi, I’ve just got this machine and same problem, did you ever fix this and what did you need to do resolve it
Hello, how are you ? Fine? Please, the function of the electrovalve is to open or close, if it has On, let it pass, if it doesn't have ON, block it. but this one seems to have a drainage tube in its body. I have ecam 610, do you know? And RÉSISTANCE DE VAPORISATION at its entrance there is a tube that has a leak because it seems to gain a lot of pressure. I already changed the oring, I already cleaned the RÉSISTANCE DE VAPORISATION inside, but still problem with leakage….. I'm already without
ideas…..
This is pretty much delonghi machines in general....I have a completely different delonghi machine and the steamer pumps water into the drip tray which then bubbles like a kettle.
Also they cant seem to grasp the fact that an espresso machine needs pressure to make a decent cup. half the time my machine cannot even find enough pressure to push the water through the beans, so that also gets pumped into the drip tray and wastes a double of fine bean grounds. The water will come through ok without any grounds and the valve is not blocked, it is 100% the lack of decent pressure........Probably due to all the hot water and steam being shot out the bottom of the machine instead of going where it is needed.
This is every delonghi I have had.....They are almost always shipped from the factory new with valves that already are broken and need replacing.
I’m having the same problem. Please help 😳 I’ve replaced flow meter, generator and O rings, water pump, steam valve. I removed and cleaned the selenoid set had to use the old one ! Did you resolve the problem
did you try the below thing and if so can you link where to get the part, im haveing same issue
Hi.I have same problem did you sort out your problem?
My Delonghi Magnifica S is dumping water into the coffee grounds container I am trying to find a solution to this problem would apricate any help
ruclips.net/video/PzqWvdNHRG8/видео.htmlsi=lq70TbI3LxQDEuz1
Try the link I gave you to see if it is happening this way…the same issue I had
@@chrisnurse1985 Which link? I cannot see any links
@@dreamkiss ruclips.net/video/PzqWvdNHRG8/видео.htmlsi=H9K52ddNYdx3LhB0
My machine leaks out of the condensate drip tray (0:28) but if I remove it, there is no sealing rubber. How can I close this ?
when you make coffee or steam it makes a lot of pressure then when you stop it releases the pressure and it goes in to the drip tray hope this helps you
Hi, i also have this problem, will try the kit. But I have water getting into the grounds collector, any advise ??
I have The same problem now have you fixed?
I have the same issues water is getting into the grounds container did you mange to get a fix for this?
Hey Andy, I have the same problem. Did you find out what the problem was and how to fix it ?
Ended up replacing the main valve inside. The new one cost about £30. www.espares.co.uk/product/es1609561
Now selling for £47😢
This means that the maschine is overheating the water due to defective mainboard or temperature sensor, just activate ECO mode or energy saving mode from the menu to help with this issue.
Just wondering if this is solved now? Andy? Demon? Did the plan work out? I'm about to embark on the same !
To be honest. I have not got around to sourcing the o-ring I need. If you have any luck, please let me know which o-ring you brought. Keen to do it in the next few weeks. Good luck!. Let me know how it goes.
See my reply above, the machine needs a new mechanical valve. Part number 5513227961, available online from many sources.
@@noidle22 where can I be got
@@chrismcguiness6952 just put that part number into ebay or google, there should be someone selling it.
Did you ever fix the leak? Please share how you did it. thanks!
Ther is a tube on the back of the front panel that can brake
Hello did you ever get an answer to this problem?
How did you take apart the machine? There are screws at the back but I don’t have the correct tool to unscrew them
Yeah. They are security torx screws. The first time I opened it I did manage to turn them with a small flat head screw driver. But then I got the right screwdriver. They are star shaped with a hole in the middle. www.toolstation.com/draper-security-bit-set/p52910?store=M5&gclid=CjwKCAjwtO7qBRBQEiwAl5WC21KGh7zaLDmS8Qh5ULc8sVmhEFXanS2kqbgqTCa89zW7NRuydPulwxoCKlgQAvD_BwE
Anyone get a fix to this? Just got exactly the same issue
demon3183 seems to have solved the problem, take a look at his comment. Just need to find the time to investigate it again.
See U-tube video ( DeLonghi Magnifica ECAM water leaks and dispencer cleaning ) by "Milen Stoitsev"
Did you ever fix this? I’ve got a slightly different magnifica model but my drip tray fills up more than it should do and when I pull it away to empty the grounds container I get a fair amount of water under the machine on the left side where the red overflow adapter is.
Help!
ruclips.net/video/vaU8dlNgfEE/видео.html
@@bikebouwer thanks will take a look. My machine still makes perfect cups of coffee but has a tiny leak. I think some machines won’t make a single cup and just leak which isn’t my case
I have the same issues water is getting into the grounds container did you mange to get a fix for this?
@@dreamkiss hey no I sold it as was a few years old. Got a Sage barista express impress machine now and it’s been great
@@Matt-nh5zi The Sage barista express does look like an awesome machine I need to fix my machine or replace it starting to feel coffee withdraw symptoms 🤣
SOLUTION: I had this problem and change the rubber washer described in this at 7:17 video ruclips.net/video/PzqWvdNHRG8/видео.htmlsi=MiHpv8KnbUz8XBhN
Did you find out what the cause was in the end. Mine is doing the exact same thing, older model bit internal parts are mostly the same.
No. No idea the tray is filling up after about 5 or 6 cups. Frustrating.
@@andydjones3334 Problem solved in the meantime?
here the same, please help.
The fix is in this video. ruclips.net/video/vaU8dlNgfEE/видео.html
Just some feedback to say this really is the fix :)
@@Bannister99
For me, this was exactly the solution to the problem. Replace it and the machines work like new.
Thanks !
Hello, this didn't fix the same leaking problem for me, still looking for solution.
works again. PERFECT FIX!!!! Thank you!
The infuser is faulty
it did not work
Boil your coffee in a simple pot and forget the rest!