You have the wrong kind of shears. You have offset shears, essentially powered aviation snips. You need a double cut shear, which has two fixed anvils with a single blade cycling between them. It creates a thin strip of waste in the 'kerf' but it creates clean edge.
If you are worried about people running into the posts with vehicles, you should add some reflective tape at driver's eye level. That way you never have to worry about the lights burning out or going bad over time. You can probably find something that would blend in really well and only be noticeable at night if you are worried about aesthetics.
Maybe you could make a “building your first bar” series! Like buying the basic equipment, what starter drinks to learn, maybe make like a serving surface? Would be super cool!
You’ve changed to whole look of your building. It’s really looking fantastic Johnny! Your pre drill segue was perfect, I’m telling my tv “stack them and pre drill”. Your editing timing was perfect!
Definitely want to install a gutter across the front of the porch. Also, hindsight you could have slid the top flashing behind the wall siding at the lap joints of the wall siding, although the way you did it seemed to work pretty fast. Shop is looking awesome my friend!
I agree with the waviness on the impact nibbler. My cuts were like that a lot until i figured it out. All i can say is don't fight it when it cuts, the battery will go from basically touching the sheet to being in the air throughout the cut. Use it more and you'll get the knack of it.
Looks good Johnny. The ends of the gable end trim seems nice to get a nice deep gash on your head just when you forget they are there. I don't know how that would happen but yeah.
You absolutely will need to install a gutter on the porch and from personal experience I would recommend a gutter guard while you're at it. You have plenty of big trees around the shop so it will be a problem eventually. I just installed them on my mom's house. Best customer ever! Sandwiches, hot food and coffee. Go mom! Her house is surrounded by tall trees in the neighbor's yard so we decided to surround the house with guards.
You finally went into the attic and pushed the siding out. How about sliding them horizontally behind the side panels? Next time! thanks for a good video.
You knocked this one out of the park! Please consider some kind of barrier, or even just a curb in front of the porch. Don’t want anything happening to that beauty!
for the shears - having support on both pieces helps, and managing your pace will dictate how much of that wave is noticeable Crafted Cocktails sounds like a great second channel I'd love to see you do something like a chainfall or stacked pots (fountain style) or another creative technique of diverting the runoff of the gutters but also adding more character to the exterior. loving this build
Your cutting attachment will cut smooth the other direction. Look at the blades and plan your cut with the proper side of the blades on the outside. When I first got this tool for my business, I had smooth cuts and then wavy cuts. It comes down to position of the blades, so find the right direction and plan your cuts accordingly
@@haphazard1342 i'm not good with english. so is more yease to use a punch tool (like a pointy tip screw driver) that you hit with the hammer and goes thru the metal sheets, predrill creates metal shavings that go thru the metal sheets and when you drag the sheet on top you may damage the paint with the metal shading. just look at R&R buldings channel they go in more in depth with this process as they use metal sheets from roofing to sidings
I was going to suggest pre-drilling the holes in the roofing, but you figured it out. The added aesthetic benefit is the screw lines are nicely straight. A tip, use a cobalt bit, it'll do exceptionally well with a cordless drill (lower rpms). One bit would probably hold up through the entire building covering. Yeah, you'll find pre-drilling wall metal is entirely beneficial.
Hey , Those sheathing panels above the roof need to be sealed also to keep the bugs out and any wind driven rain also. Just like you did on the roof panels .
@@craftedworkshop The fire block stuff might be required blah blah lol . I see you plan on drop ceilings . FYI on a windy day in a factory showroom by me I saw a ceiling twice the size of your shop got tossed into the loft area by a gust of wind from an open outside door . Serious it was a really wild thing to see an entire ceiling of panels do a wave then fall into the showroom . Not a ceiling guy but my guess they missed some kind of clips to hold the panels down . Good Luck Pal
I'd say reach out to RnR buildings for tips on cutting the roofing material. I know you're a DeWalt fanboy but Milwaukee has a snip that they use over there with great success.
Damn man, awesome. That building is awesome. Your shop is awesome. The "tiny house"? I can't remember what you call it, is awesome. Question, what do you do for a living? Because I think I need to change my career. Lol
Can i ask, Do you ever feeling sick during on your work? I'm so very deeply emotional when it goes like this going to work then in a minute feeling sick. :(
When we can we loosen the wall metal where they lap and simply slide our pieces in behind the wall metal then just slide them back in place,it is so much easier to just slide them in,GOD BLESS
I love how many people in the comments are telling him how he could do better and what he’s doing wrong. The man that has created a small empire on his skills is getting pointers from unemployed guys at their moms house.
I was really surprised to see the manufacturer call for fasteners in the low spots of the roofing metal. I always thought you were supposed to install on the high part.
😂 I mean yea a gutter would be helpful on there but....allowed? What kind of place makes you have a gutter 😄 that's hilariously infuriating to even think of someone coming by and saying..YOU MUST PUT A GUTTER OR ELSE🙅♂️. 🤜🤜 🤜🙅♂️💨 Get slapped off my porch
Glad to see that roofing nailer is working again after we borrowed it!!
Haha❤
Barely 😂 didn’t show the few jams I had to clear
We needed Jamie for this one 😪
You have the wrong kind of shears. You have offset shears, essentially powered aviation snips. You need a double cut shear, which has two fixed anvils with a single blade cycling between them. It creates a thin strip of waste in the 'kerf' but it creates clean edge.
If you are worried about people running into the posts with vehicles, you should add some reflective tape at driver's eye level. That way you never have to worry about the lights burning out or going bad over time.
You can probably find something that would blend in really well and only be noticeable at night if you are worried about aesthetics.
This guy safeties efficiently.
Maybe you could make a “building your first bar” series! Like buying the basic equipment, what starter drinks to learn, maybe make like a serving surface? Would be super cool!
The porch roof looks awesome! The black metal contrasts nicely with the lighter metal of the shop's walls.
You’ve changed to whole look of your building. It’s really looking fantastic Johnny! Your pre drill segue was perfect, I’m telling my tv “stack them and pre drill”. Your editing timing was perfect!
Definitely want to install a gutter across the front of the porch. Also, hindsight you could have slid the top flashing behind the wall siding at the lap joints of the wall siding, although the way you did it seemed to work pretty fast. Shop is looking awesome my friend!
The same thing occurred to me--just slide it through the vertical lap joints. Oh well, hindsight is 20/20.
I agree with the waviness on the impact nibbler. My cuts were like that a lot until i figured it out. All i can say is don't fight it when it cuts, the battery will go from basically touching the sheet to being in the air throughout the cut. Use it more and you'll get the knack of it.
Looks good Johnny. The ends of the gable end trim seems nice to get a nice deep gash on your head just when you forget they are there. I don't know how that would happen but yeah.
You absolutely will need to install a gutter on the porch and from personal experience I would recommend a gutter guard while you're at it. You have plenty of big trees around the shop so it will be a problem eventually. I just installed them on my mom's house. Best customer ever! Sandwiches, hot food and coffee. Go mom! Her house is surrounded by tall trees in the neighbor's yard so we decided to surround the house with guards.
I've driven past your new place so many times. Didn't know there was anything back there. Great video as well love seeing it come together.
Lexel is one of my favorites for this type of applications!
You finally went into the attic and pushed the siding out. How about sliding them horizontally behind the side panels? Next time! thanks for a good video.
You knocked this one out of the park! Please consider some kind of barrier, or even just a curb in front of the porch. Don’t want anything happening to that beauty!
for the shears - having support on both pieces helps, and managing your pace will dictate how much of that wave is noticeable
Crafted Cocktails sounds like a great second channel
I'd love to see you do something like a chainfall or stacked pots (fountain style) or another creative technique of diverting the runoff of the gutters but also adding more character to the exterior.
loving this build
Your cutting attachment will cut smooth the other direction. Look at the blades and plan your cut with the proper side of the blades on the outside. When I first got this tool for my business, I had smooth cuts and then wavy cuts. It comes down to position of the blades, so find the right direction and plan your cuts accordingly
Great video Johnny. The workshop renovations videos are very good. The front of your workshop needs your logo just above your porch now.
Use a punch for preholes in the you will not end up with metal between the panels. tip from R&R buldings
A hole punch or a center punch? He did pre-drill, which seems like an even better solution since it also acts as a guide when installing the screws.
@@haphazard1342 R&R builders has great explanations for why a punch is better. No metal shavings.
@@haphazard1342 i'm not good with english. so is more yease to use a punch tool (like a pointy tip screw driver) that you hit with the hammer and goes thru the metal sheets, predrill creates metal shavings that go thru the metal sheets and when you drag the sheet on top you may damage the paint with the metal shading. just look at R&R buldings channel they go in more in depth with this process as they use metal sheets from roofing to sidings
I'm really enjoying this series! Yes to "crafted cocktails"!
i think this guy have every cordless tool dewalt makes , work hard you will get good sponsorships
I love how you show all your boneheaded mistakes. We all do these same things. Authentic, baby!
You should put some of those car proof pillars along the front of the shop for extra protection
They are called bollards.
7:12 Crafted Cocktails! Do it, I need a good resource for learning some about great drinks and techniques
Throw some reflective tape on the posts at knee height to warn cars 😉
Looking REALLY GOOD! Can't wait to see it all painted with a Crafted logo up there!
Looks great… surprised you installed this before you painted the older siding.
Back when I did roofing, we just put a wood blade in a skill saw backwards to cut metal panels. Makes for a pretty clean cut.
Always offset your string line. Even just an inch and measure back. Keeps it from creeping 😎
Good tip. Also managed to cut the line with one of the panels, those edges are sharp!
@@craftedworkshop also check out RR Buildings he’s a wizard with all things roofing 👌🏻😎
@rrbuildings for all your metal roofing and siding info. Man is an artist.
Great work man. Loving watching the new shop transform!
Stay safe and we'll see you next time.
16:04 YA YO YAAA YOOO SET SAIL FOR ONE PIECE
"one piece" screen wallpaper really caught my eye.... let's go...
I like your lock screen
Great job and great finish .it's tough when you don't have help. Just set 📐 your mind to the task and it will get completed.
Porch area looks great! I could use these videos daily, can't wait for the next one in the series!
Get a hobby.
They also make nibbler attachments now. Much more control for thin and small jobs (from my experience only)
I was going to suggest pre-drilling the holes in the roofing, but you figured it out. The added aesthetic benefit is the screw lines are nicely straight. A tip, use a cobalt bit, it'll do exceptionally well with a cordless drill (lower rpms). One bit would probably hold up through the entire building covering. Yeah, you'll find pre-drilling wall metal is entirely beneficial.
The porch roof looks great!
That porch overhang turned out looking great Johnny! What a massive amount of work! 👍👍
I'm all about the cocktails.
W he got that one piece background on his phone alr finished the series best anime by far
Amazing work, Johnny! It really turned out fantastic! 😃
Stay safe there with your family! 🖖😊
Can you share a link for the magnetic GoPro holder seen around the 9:50 mark. Great progress!
Hey , Those sheathing panels above the roof need to be sealed also to keep the bugs out and any wind driven rain also. Just like you did on the roof panels .
Yup, going to use spray foam once everything dries out!
@@craftedworkshop The fire block stuff might be required blah blah lol . I see you plan on drop ceilings . FYI on a windy day in a factory showroom by me I saw a ceiling twice the size of your shop got tossed into the loft area by a gust of wind from an open outside door . Serious it was a really wild thing to see an entire ceiling of panels do a wave then fall into the showroom . Not a ceiling guy but my guess they missed some kind of clips to hold the panels down . Good Luck Pal
@@michaelcolgan3182 That would be AWESOME to see!
The one piece screen saver should deserve a sub from people haha.
+1 for the cocktail channel
Malco makes a folding tool for bending sheet metal. Model 24F has a 3/8” and 1” slot for bending up to 24” long flanges. Check it out on Amazon.🇨🇦
Nice job yeah it's unbelievable how many screws it takes
I'd say reach out to RnR buildings for tips on cutting the roofing material. I know you're a DeWalt fanboy but Milwaukee has a snip that they use over there with great success.
project is really looking great.
For those flashing end bends I'd look at the Harbor Freight 96523 sheet metal folding tool.. $12 well spent.
I was waiting for the new tool(s) you will have for this episode 😂
Don't think we missed that One Piece background 👍
CraftedCockails? Um...yes!
Looks great, really enjoying the whole series
What did I take away from this video? Johnny is a One Piece fan!
Such awesome work!!
Damn man, awesome. That building is awesome. Your shop is awesome. The "tiny house"? I can't remember what you call it, is awesome. Question, what do you do for a living? Because I think I need to change my career. Lol
Beautiful work
Vulkem, polyurethane caulk. Numero uno. From Tremco.
Have really enjoyed watch you remodel that shop. Well done. The solar lights... where did you get them. They look like good ones. Thank you.
The solar light are junk. They'll be dead in a month.
Great content as always.
I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.
Very nice
my neighbors drip edge isn't overlapping, When the wind blows it flaps back and forth making the most unholy sounds that can be heard inside my house.
great project, looks awesome!!
Score the metal with a utility knife before bending, makes a cleaner bend
Great vid
Looks great!!!
You need heavy duty crash post to protect your porch uprights and the front of your building
Can i ask, Do you ever feeling sick during on your work? I'm so very deeply emotional when it goes like this going to work then in a minute feeling sick. :(
When we can we loosen the wall metal where they lap and simply slide our pieces in behind the wall metal then just slide them back in place,it is so much easier to just slide them in,GOD BLESS
What the HELL does god have to do with this metal roof?
@@idontthinkso666 everything
@@idontthinkso666 it's just my belief Its also free speech,GOD BLESS
Do you think this type of roofing gets hotter around that area in the summer over the conventional roofing? Asking for a friend.
It was a mission but it looks awesome
You should also install gutters
Keep the vids coming.
Hell yes
Look 👍🏼 great
How you installed the drip edge makes it useless. but hey it looks good. ^^
I'm curious where you developed your speaking style. It's got a unique cadence.
Pulling in late at night? Are you going to be running poker games out of the back on weekends? Looks great. Thanks for posting
Is the porch roof loud when it rains?
is there a concern with the treated lumber rotting the metal I have Sean aluminum rot when on treated wood???????????????????????
Who is Sean?
solar painels ? ☺
Looks like someone has been watching RR Buildings
I love how many people in the comments are telling him how he could do better and what he’s doing wrong. The man that has created a small empire on his skills is getting pointers from unemployed guys at their moms house.
Personally I would have added a reflector to each of the posts, lower to the floor, if I were worried about them being hit.
16:06 One Piece 🤗🔥
You know I've always heard the best exercise is screwing :)
What is a "section of the him" mean?
Are you going to paint the whole building??
I was really surprised to see the manufacturer call for fasteners in the low spots of the roofing metal. I always thought you were supposed to install on the high part.
This is common on metal roof panels that have some minimal slope, like 1.5:12 or more.
If you put the screws on the high spot. The panel will spread out and move.
Put the butyl tape on the top of the previous panel not the underneath of the next panel.
Definity put a gutter on there. Cant believe your actually allowed to not have one!
😂 I mean yea a gutter would be helpful on there but....allowed? What kind of place makes you have a gutter 😄 that's hilariously infuriating to even think of someone coming by and saying..YOU MUST PUT A GUTTER OR ELSE🙅♂️.
🤜🤜 🤜🙅♂️💨 Get slapped off my porch
Crafted cocktails 🤔 not my thing but I might know few people that be interested in that...
Definitely need gutters. Besides flooding the posts, everyone walking under the porch will get a full shower without them.
#OnePiece adherent👏
Snap a chalk line then use your razor blade an bend an snap
Found a nibbler works best for metal but that’s just my experience
I’ve used both makita and Milwaukee both very good