Hey buddy yeah trucks doing awesome to be honest with you , I’ve now passed it on to a friend of mine and he loves it still tough as nails and popping wheelies everywhere Stay awesome Chris 🤙👍🤘🚀💪
Hey buddy , Yeah got to say Lee is a awesome guys 100% and the tolerances on his stuff are tip top . i can only say good things for sure . Hope you enjoyed the video Stay awesome Chris :)
Hey buddy , Yeah hoping to get it out tomorrow and the beach then this weekend or early week . im going to be using this loads as have some time off work for the next week . Hope that your well buddy , Stay awesome Chris :)
Got a few more to do yet buddy , the servo needs addressing i think before i call it a day . No worries buddy if you need any more information hit me up on Facebook or i can drop you a link to the drive cups . Thanks for watching and all your support Philly dude . Stay awesome Chris :)
hi ya mate great looking truck and what a great set of grades you have been sponsored to put on the truck., cant wait to see this one out and bashing. hope you and the family are all well. cant wait to get out and start doing more videos myself with my rcs rubbish weather. peter anne and ella
Hey Pete ! Yeah shes a beauty for sure really head over heels with this truck 100% Yeah was really nice to have Custom RC Upgrades allowing me to get sponsored for these videos Lee makes some simply awesome parts , there very well thought out and made from the best materials out there . Got a video coming out at 9am so look out for that and tons more to come over the next week . Stay awesome bud Chris :)
Greetings, am also the proud owner of a Kraton 4S v2 and have followed with great interest your "upgrade" video! When I saw the video, I was unfortunately already too late and at Custom RC Upgrades, the DriveCups were unfortunately already sold out at that time! I unfortunately don't use Facebook so could you villeicht in experience when the Drive Cups would be available again, that would be super! Hope to see many more great and informative videos about your Outcast v2 even though I drive the Kraton myself but technically they are identical except for the chassis! Best regards
Hey buddy , many thanks for watching the video , and hope that your well , i know that Lee the owner of custom Rc upgrades is currently out of the country but i can drop him a message if you would like about stock availability on the drive cups if you would like . Massive thanks for the kind comments and look forward to hearing from you Stay awesome Chris :)
NIce 1! My rear axels have had a bit of a workout now, slightly twisted, but still good to go. I did get some ally ones but haven't needed to install them YET. The other upgrade I would suggest are the rear axel mud guards. The suspension arms are so long, which is great, but the front wheels give the rear wheels every rock and stone they can fling at them, and I noticed it tends to wear the rear out a bit. The other problem I have with the 4s trucks is stones and pebbles lodging in the steering and the driveshafts and just filling up inside the body in general. Be interesting to see how you go with that, and what you suggest. Excellent work with building your channel, getting the merch up and running really adds some authenticity to the whole appearance of it all. More power to you mate, can't wait to see this bad boy in action!!
Hey Avo mate , Hows the world at the other end dude ! Got to ask man hows the little dude ? has he had a go yet on the outcast yet lol . As for the Mud guards yes your right for sure 100% bud , ive got a set being made as we speak by Big Foot Customs , Im a advocate for guards really made a diffrence on my Tyhoon and Big rock keep the rear of the car clean and debris free . As for stones yes this is a issue i have had in the past with my big rock , Im planning on upgrading the servo saver and servo when i get chance to sit down and wrench on it again now , just working out which route to go down with the servo saver as the one they provide is very weak . Ah man thanks so much for all the support with the channel also its the likes of you guys that are making it what it is and i can only hope that i can keep it interesting enough for you all to want to come back and keep watching buddy . As for the merch bud drop me a email in the week and ill get a T Shirt made for you and sent to OZ as long as you promise to wear it in one of your videos lol ! Got a video of the first run of this truck coming out at 9am this morning so please make sure you tune in to watch it buddy . Stay awesome fella and by the way when you making another video man , I would love to see the outcast in action again 100% Chris :)
@@ChriswithaCrc Going great over here thank you mate, super busy but definitely bubbling along with the videos and my plans for world domination ;-) Nice work on the guards! I wouldnt worry about keeping it interesting mate, so long as you are interested that comes through and I think thats the key. Its easy to get lost in the details. My pleasure mate, thanks also for your support! As for the shirt, I would be honored mate, look out for an email this week for sure!! Champion! I need some new threads too lol Next vid was supposed to be out 3 weeks ago lol. But I have other priorities so sometimes YT has to take a back seat. Never fear though, my vision will not die. Have a few surprises lined up so look out!! Peace and wholeness brother!!
Great video Chris! I was told you're from the rhondda valleys can you reccomend any good spots. I have a kraton 6s if you ever want to go for a thrash 🤙
That would be cool only issue is that because it’s not a standard part companies probably would not produce them . Thanks for watching rich buddy Chris 🏴🇬🇧🤙😎🤘🚀
Hey mate , Yeah i was suprised also , but now im running full Metal gearing now so all good , Weird one as this truck also came with the 3s shafts , so i belive that its a pre production model from what im told of the v2 according to Logic RC . Stay awesome Chris :)
Hallo, where can I find these metal outdrives, I can't find them on the rc spares website, can you send me the link to them. Thanks and have a nice day
Hey buddy , Hope that your well , These are custom outdrives made by CRCU ( Custom RC Upgrades ) Here is the link here - customrcupgrades.com/product/arrma-4s-drive-cup-set/ Stay awesome Chris :)
Hey great stuff Chris. Those drive cups do look the business. I'd definitely have a look at upgrading if I break the stock ones. Kind of those companies to send you those bits. Like you say the weather should hopefully perk up and you can get out and actually drive this thing. Be interested in what you think. Cheers mate 🙂
Hey Pete , Hope your well buddy , Yeah CRCU do make some amazing upgrades , As you know im more of a Upgrade before running kinda guys or at least run once then work out what i want to upgrade from the off . Also i got to give RC Breakers UK a big shout as they had my parts out to me the next day thats service you dont get from many places . Hoping to get out tomorrow for a bit of a shake down with it on 3s as by all accounts its quite spicy on 3s , i want to get used to the way it handles before handing it its arse on 4s firstly. i suspect the servo is going to get on my wick so thats on the cards straight away , Ive got a fast 35kg servo to go right in , but i also have listened to what you said about the servo saver and planning on ordering that next week i think . Stay awesome buddy Chris :)
Hey dude , Thanks for watching firstly , So have you fitted the CRCU Drive cups ? I ran the truck today for the first time and no i dont have any issues with mine at all to be honest with you . Looking forward to hearing from you and By the way i have a running video coming out today on it , youll be able to see there . Stay awesome Chris :)
@@ChriswithaCrc yeah the CRCU ones. They are machined really well. They rub a little on the rear of the vehicle, the front seems fine. Thx! I’ll check the video out
@@turbodutch I am also very interested in the CRCU DiffCups and therefore could you please describe in more detail where and how they grind on the rear axle .. etc.! When were they bought and did you possibly inform CRCU about this discrepancy? I look forward to an answer greetz
@@MrYoEddy I ordered them on the 20th of july. I dont see it as a big problem but something I found odd. It touches the link where it screws to the car. Havent driven with them yet as i blew my motor lol. Dont think it can hurt but we’ll see Greetz!
@@turbodutch Not nice to read that your engine is broken, but funny in that I currently want to sell my entire drive unit, because I switched to a Hobbywing combo, but only because I already have appropriate programming cards and Bluetooth modules! If you have driven with the diff cups, please keep us here with your experiences up to date ..., that would be very nice! Thank you very much for that ! greetz
Seems like my outcast 4s already had those beefier driveshafts on. I took it out for a first proper run today and the pin must have flew out and the driveshaft popped out :(
Hey man wow thats a shame for sure , yeah the arrma cups seem to be problematic , so hence i upgrades mine to the CRCU cups ( Custom Rc Upgrades ) you wont get any issues with those as there captured . Hope that this helps some what . Thanks for watching Stay awesome Chris :)
Hey dude! You think these will fit the V3 big rock?? It's the length I'm not sure about. I want to change to 17mm hex anyway so these could be a nice upgrade 👍🏻
Hey buddy , Hope that your well , ok so they will work with some adjustments, you’ll going to have to chop the outcast drive shafts to fit the big rock as the arms on the Big rock are smaller .
@@ChriswithaCrc I see so they're just a bit longer then. Little chopperooo is no problem 👍🏻 by the way, are them chunkier ones just off a newer 4s? They're not aftermarket parts?
How is this truck doing today? Did those axle cups work out? I’m second away from placing an order for my Kraton 4s
Hey buddy yeah trucks doing awesome to be honest with you , I’ve now passed it on to a friend of mine and he loves it still tough as nails and popping wheelies everywhere
Stay awesome
Chris 🤙👍🤘🚀💪
I just upgraded to these yesterday! Quality part and much more stronger than stock - I used a dab oof loctite on the set screws!
Hey buddy , Yeah got to say Lee is a awesome guys 100% and the tolerances on his stuff are tip top .
i can only say good things for sure .
Hope you enjoyed the video
Stay awesome
Chris :)
How are they holding up?
Looking forward to seeing it run. Beach would be good 👍🏻
Hey buddy , Yeah hoping to get it out tomorrow and the beach then this weekend or early week . im going to be using this loads as have some time off work for the next week .
Hope that your well buddy ,
Stay awesome
Chris :)
Awesome upgrades. You made it into a tank. I need to do that for my kraton 4s. Thanks for the info.
Got a few more to do yet buddy , the servo needs addressing i think before i call it a day .
No worries buddy if you need any more information hit me up on Facebook or i can drop you a link to the drive cups .
Thanks for watching and all your support Philly dude .
Stay awesome
Chris :)
hi ya mate
great looking truck and what a great set of grades you have been sponsored to put on the truck.,
cant wait to see this one out and bashing.
hope you and the family are all well.
cant wait to get out and start doing more videos myself with my rcs rubbish weather.
peter anne and ella
Hey Pete !
Yeah shes a beauty for sure really head over heels with this truck 100%
Yeah was really nice to have Custom RC Upgrades allowing me to get sponsored for these videos Lee makes some simply awesome parts , there very well thought out and made from the best materials out there .
Got a video coming out at 9am so look out for that and tons more to come over the next week .
Stay awesome bud
Chris :)
Greetings, am also the proud owner of a Kraton 4S v2 and have followed with great interest your "upgrade" video!
When I saw the video, I was unfortunately already too late and at Custom RC Upgrades, the DriveCups were unfortunately already sold out at that time!
I unfortunately don't use Facebook so could you villeicht in experience when the Drive Cups would be available again, that would be super!
Hope to see many more great and informative videos about your Outcast v2 even though I drive the Kraton myself but technically they are identical except for the chassis!
Best regards
Hey buddy ,
many thanks for watching the video , and hope that your well , i know that Lee the owner of custom Rc upgrades is currently out of the country but i can drop him a message if you would like about stock availability on the drive cups if you would like .
Massive thanks for the kind comments and look forward to hearing from you
Stay awesome
Chris :)
NIce 1! My rear axels have had a bit of a workout now, slightly twisted, but still good to go. I did get some ally ones but haven't needed to install them YET. The other upgrade I would suggest are the rear axel mud guards. The suspension arms are so long, which is great, but the front wheels give the rear wheels every rock and stone they can fling at them, and I noticed it tends to wear the rear out a bit. The other problem I have with the 4s trucks is stones and pebbles lodging in the steering and the driveshafts and just filling up inside the body in general. Be interesting to see how you go with that, and what you suggest. Excellent work with building your channel, getting the merch up and running really adds some authenticity to the whole appearance of it all. More power to you mate, can't wait to see this bad boy in action!!
Hey Avo mate ,
Hows the world at the other end dude !
Got to ask man hows the little dude ? has he had a go yet on the outcast yet lol .
As for the Mud guards yes your right for sure 100% bud , ive got a set being made as we speak by Big Foot Customs , Im a advocate for guards really made a diffrence on my Tyhoon and Big rock keep the rear of the car clean and debris free .
As for stones yes this is a issue i have had in the past with my big rock , Im planning on upgrading the servo saver and servo when i get chance to sit down and wrench on it again now , just working out which route to go down with the servo saver as the one they provide is very weak .
Ah man thanks so much for all the support with the channel also its the likes of you guys that are making it what it is and i can only hope that i can keep it interesting enough for you all to want to come back and keep watching buddy .
As for the merch bud drop me a email in the week and ill get a T Shirt made for you and sent to OZ as long as you promise to wear it in one of your videos lol !
Got a video of the first run of this truck coming out at 9am this morning so please make sure you tune in to watch it buddy .
Stay awesome fella and by the way when you making another video man , I would love to see the outcast in action again 100%
Chris :)
@@ChriswithaCrc Going great over here thank you mate, super busy but definitely bubbling along with the videos and my plans for world domination ;-)
Nice work on the guards!
I wouldnt worry about keeping it interesting mate, so long as you are interested that comes through and I think thats the key. Its easy to get lost in the details.
My pleasure mate, thanks also for your support!
As for the shirt, I would be honored mate, look out for an email this week for sure!! Champion! I need some new threads too lol
Next vid was supposed to be out 3 weeks ago lol. But I have other priorities so sometimes YT has to take a back seat. Never fear though, my vision will not die. Have a few surprises lined up so look out!!
Peace and wholeness brother!!
Great video Chris! I was told you're from the rhondda valleys can you reccomend any good spots. I have a kraton 6s if you ever want to go for a thrash 🤙
Would love to go for a RIP buddy if your up for it we go out regular . Drop me a message on facebook if you want to .
Stay awesome
Chris :)
It would be nice if some developed a rubber gaiter to go over the CRCU diff cup and shaft to keep the ball joint clean.
Looks smart though mate. 🤘
That would be cool only issue is that because it’s not a standard part companies probably would not produce them .
Thanks for watching rich buddy
Chris 🏴🇬🇧🤙😎🤘🚀
Surprised to see plastic crown gears on the diffs, I thought they were metal on the 4s v2. Besides that, great build!
Hey mate , Yeah i was suprised also , but now im running full Metal gearing now so all good , Weird one as this truck also came with the 3s shafts , so i belive that its a pre production model from what im told of the v2 according to Logic RC .
Stay awesome
Chris :)
@@ChriswithaCrc but isn't it a v1 then?
Nice
Thanks buddy ❤️
Hallo, where can I find these metal outdrives, I can't find them on the rc spares website, can you send me the link to them. Thanks and have a nice day
Hey buddy , Hope that your well , These are custom outdrives made by CRCU ( Custom RC Upgrades )
Here is the link here - customrcupgrades.com/product/arrma-4s-drive-cup-set/
Stay awesome
Chris :)
Thanks a lot, greetings from Germany.
Hey great stuff Chris. Those drive cups do look the business. I'd definitely have a look at upgrading if I break the stock ones. Kind of those companies to send you those bits. Like you say the weather should hopefully perk up and you can get out and actually drive this thing. Be interested in what you think. Cheers mate 🙂
Hey Pete ,
Hope your well buddy , Yeah CRCU do make some amazing upgrades , As you know im more of a Upgrade before running kinda guys or at least run once then work out what i want to upgrade from the off .
Also i got to give RC Breakers UK a big shout as they had my parts out to me the next day thats service you dont get from many places .
Hoping to get out tomorrow for a bit of a shake down with it on 3s as by all accounts its quite spicy on 3s , i want to get used to the way it handles before handing it its arse on 4s firstly.
i suspect the servo is going to get on my wick so thats on the cards straight away , Ive got a fast 35kg servo to go right in , but i also have listened to what you said about the servo saver and planning on ordering that next week i think .
Stay awesome buddy
Chris :)
I just installed my drive cups, but the cups are rubbing against the caster links. Do you have this too?
Hey dude ,
Thanks for watching firstly , So have you fitted the CRCU Drive cups ?
I ran the truck today for the first time and no i dont have any issues with mine at all to be honest with you .
Looking forward to hearing from you and By the way i have a running video coming out today on it , youll be able to see there .
Stay awesome
Chris :)
@@ChriswithaCrc yeah the CRCU ones.
They are machined really well. They rub a little on the rear of the vehicle, the front seems fine.
Thx! I’ll check the video out
@@turbodutch I am also very interested in the CRCU DiffCups and therefore could you please describe in more detail where and how they grind on the rear axle .. etc.!
When were they bought and
did you possibly inform CRCU about this discrepancy?
I look forward to an answer
greetz
@@MrYoEddy I ordered them on the 20th of july. I dont see it as a big problem but something I found odd. It touches the link where it screws to the car.
Havent driven with them yet as i blew my motor lol. Dont think it can hurt but we’ll see
Greetz!
@@turbodutch Not nice to read that your engine is broken, but funny in that I currently want to sell my entire drive unit, because I switched to a Hobbywing combo, but only because I already have appropriate programming cards and Bluetooth modules!
If you have driven with the diff cups, please keep us here with your experiences up to date ..., that would be very nice!
Thank you very much for that !
greetz
Seems like my outcast 4s already had those beefier driveshafts on. I took it out for a first proper run today and the pin must have flew out and the driveshaft popped out :(
Hey man wow thats a shame for sure , yeah the arrma cups seem to be problematic , so hence i upgrades mine to the CRCU cups ( Custom Rc Upgrades ) you wont get any issues with those as there captured .
Hope that this helps some what .
Thanks for watching
Stay awesome
Chris :)
@ChriswithaCrc Those cups do look great! I've ordered a set of 4 pins and shims so I'll see how i go on with them for now 😅
@@mcr.onwheelsI lost my pins on my kraton 4s. U know what size pin I order??
Hey dude! You think these will fit the V3 big rock?? It's the length I'm not sure about. I want to change to 17mm hex anyway so these could be a nice upgrade 👍🏻
Hey buddy ,
Hope that your well , ok so they will work with some adjustments, you’ll going to have to chop the outcast drive shafts to fit the big rock as the arms on the Big rock are smaller .
@@ChriswithaCrc I see so they're just a bit longer then. Little chopperooo is no problem 👍🏻 by the way, are them chunkier ones just off a newer 4s? They're not aftermarket parts?