I'm on day 113. Really hoping it doesn't take too much longer. Still no word on my free ones from silencerco either. I'm remembering why I never wanted to buy a suppresor.
@@jasonmorris159 if you normal then it won’t matter. It’s just a cool factor. Sometimes I forget I even have it because I’m too poor to shoot all the time. I haven’t heard anything about my bogo deal as well but I’m assume it’s all due to this atf stuff for the extra delay
It’s good, but no where near as good in person probably, some microphones can increase the noise of the round going off. My Savage MKII actually sounds louder with on video than in person, same with my Mark 23 through my Octane 45
Got me a $0.99 zipper pencil case with a clear window from walmart to hold all the accessories and my approved stamp for this lol i have almost every accessory for it.
Im new to supressors and have a genuine question please dont bash me guys. But why does the 9mm ruger charger sound quiet as hell then all of a sudden got so loud as if the supressor wasn't attached? Was that just the placement of the camera for those few shots? The camera was obviously moved closer to the end of the supressor but it sounded un-supressed
@@Sir...... Fix it my bad ill fix the post for some reason the front end cap will not screw back on it dropped from my hand that i have nerve damage in and now wont screw back in sad panda .
Do you guys have a 13x1 RH ASR mount for that galil? or did you rethread the barrel to 1/2/x28... I have an omega 46m on the way and have found 14x1 LH mounts for AKMs, but none for the galil.
Im learning about suppressors and was looking into a Hybrid 46m for a first time buy....but I was wondering if these heavier suppressors cause cycling issues with tilt barrel handguns ? And has anyone run one of these on an AK47 pistol/SBR setup ?
@@AuburnMan The vast majority of shooters typically do not need to concern themselves with the maintenance of their centerfire suppressors. While carbon buildup is expected over time, the high pressure generated by the rounds effectively breaks down and expels excess carbon. Should you choose to clean the suppressor, a recommended method is to soak the internal components overnight in brake cleaner, followed by running a magazine through it.
On every product page you will find the option to download the manual which will have the Barrel Length Restrictions. Here are the restrictions for the 46M "The 36M and 46M are rated for barrels as short as 10” for .223 Remington/5.56mm NATO, 16” barrels for .308 Winchester/7.62mm NATO, and 18” barrels for .300 Winchester Magnum and .338 Lapua Magnum. Additionally, the Hybrid 46M is rated down to 16˝ barrels for 45-70 and 458 SOCOM. The Hybrid is rated down to 18˝ barrels for all magnum calibers up to 338 Lapua Mag."
I have a Hybrid 46 and I'm curious as to the major draw for this can. The short version isn't that much lighter than the non-modular 46 (although it is a bit shorter). Is there a massive selling point I'm missing? I love SiCo stuff; I also have an Octane 45, Sparrow, Saker 7.62, Omega 36M, and Switchback. Next on the list is probably a Salvo. I'm not trying to bad mouth the can or the company so please don't take it that way.
I get your point perfectly, and I'm guessing you, like me have been at the rodeo for a while. But, there are so many new people getting into the game, which is good for the overall industry. This is the perfect first can, last can for the fairly new guy, 1 or 2 years in with about 4-5 firearms, and is now getting into suppressors. And also a good can for a suppressor junkie like me.
I have the H46 as well and I've thought of getting this one as well because its so big and heavy on pistols. I already have an Omega 36 so I wont be buying this one. Though this is a perfect first and only suppressor.
Think its more for folks not already owning a 46 standard. big point is the ability to cut down size IMO that's at least the selling point for me especially if its your first suppressor and your going to hop between guns alot
I have a henry 44mag all weather side gate which I have not fired. Unfortunately there's not enough real estate on the business end to thread it. Beautiful rifle, but tempted to sell and trade it for the x model which has a threaded barrel. Ah the dilemma as the X model is not nearly as pretty.
@@bench175did you have to get an adjustable gas piston for your AK’s? I have a Galil Ace in 5.56 and a Zastava M70, and I was thinking of getting a 46M once I turn 21.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
This is the type of video I was really looking for! Thank you!!
After 155 days finally have this beauty
Just got mine. Took 204 days 😢
I am in day 3, going to be a LONG summer
@@jackdundon2261did u get it yet?
I'm on day 113. Really hoping it doesn't take too much longer. Still no word on my free ones from silencerco either. I'm remembering why I never wanted to buy a suppresor.
@@jasonmorris159 if you normal then it won’t matter. It’s just a cool factor. Sometimes I forget I even have it because I’m too poor to shoot all the time. I haven’t heard anything about my bogo deal as well but I’m assume it’s all due to this atf stuff for the extra delay
This was actually a great demo of cans and how much the reduction is
It’s good, but no where near as good in person probably, some microphones can increase the noise of the round going off. My Savage MKII actually sounds louder with on video than in person, same with my Mark 23 through my Octane 45
Thats all the same can on different calibers
Finally got mine out of jail today, love it. Worth every penny.
Perfect video to showcase this suppressor. Thank you!!
SILENCE is GOLDEN!! ✝️🇺🇸✝️
Looks like somebody had a fun day at the Range
Good demo
My first can. Soon. In a few weeks❤
I love it ‼️ Definitely picking one up 🙌🏾
Sound guy with the asmir sound quality, needs to be paid extra!
Do you need to own a land to shoot guns outdoor? My gosh this was a great stress reliever therapy.
No you don't there are many outdoor ranges :)
either own land or find a good spot
Im gonna save that as my new sleep video.....thats better than rain.
been waiting on my hybrid 46 for a year, thanks ATF! jerks! everytime i get one they’ll have a newer one out...
The loudest thing in this vid were the insects buzzing around 😄😄
I bought one today hopefully I don’t have to wait too long
Beautifully said!
GREAT VIDEO !!!!
Just bought one. Probably won't get out of jail until Feb 2023 at the earliest.
Got me a $0.99 zipper pencil case with a clear window from walmart to hold all the accessories and my approved stamp for this lol i have almost every accessory for it.
Can’t wait for mine to get here!!
How long did it take?
@@jackdundon2261 I e-filed, and got it right around 8 months
Im new to supressors and have a genuine question please dont bash me guys.
But why does the 9mm ruger charger sound quiet as hell then all of a sudden got so loud as if the supressor wasn't attached?
Was that just the placement of the camera for those few shots? The camera was obviously moved closer to the end of the supressor but it sounded un-supressed
So this looks cool for PCCs i need one for 9mm-458 lott
What is that Front Cap removal tool?
Love the content! Thanks
Are you shooting subsonic rounds or regular?
All rifle rounds used in this video were supersonic rounds. All 9mm, 300blk, and .45acp used were subsonic.
Is this the better can if I want to shoot 45 acp
I was thinking on the 36m but I do want to also use it on 45 cal this can looks like it will do all the 36m can do and run 45
The bolt action sounds like the intervention from mw2
Love SilencerCo Supressors but as of now i am trying to get ahold of some one to see what to do with my Spectre 2 . Love that little suppressor.
... to clean it ? .... to fix it ?
@@Sir...... Fix it my bad ill fix the post for some reason the front end cap will not screw back on it dropped from my hand that i have nerve damage in and now wont screw back in sad panda .
Do you guys have a 13x1 RH ASR mount for that galil? or did you rethread the barrel to 1/2/x28... I have an omega 46m on the way and have found 14x1 LH mounts for AKMs, but none for the galil.
I didn’t know you guys were into ASMR
ASR ASMR
I want one but my rugged radiant has taken 20 months already.
Jesus dude. You should call the ATF and check on it. Theres a number you can call.
holy
In Colorado it takes like 6 months
2:38 - Whoa whoa whoa, an HK 53-type in 300 Blackout?
You know it! Check out Dakota Tactical. They do some awesome stuff.
@@SilencerCo Neat, will do
This is how you fucking advertise!!! Yeah I’m getting this ASAP!!
You're going to love it! Let us know if you have any questions. We're here to help!
They came out with this shortly after I bought my H46 that's still in jail or I'd have bought this one!
How does it run on an AK? If I were to buy one, would I need an adjustable gas piston on a gun like a Galil Ace or Zastava M70?
Im learning about suppressors and was looking into a Hybrid 46m for a first time buy....but I was wondering if these heavier suppressors cause cycling issues with tilt barrel handguns ?
And has anyone run one of these on an AK47 pistol/SBR setup ?
When shooting 9mm were you using the 30 or 45 cal end cap?
Do not use a 30 caliber endcap for 9mm as you will get endcap strikes. Use a 9mm (36) or 45mm front caps.
@ thank you for clearing that up for me!
@@AuburnMan No problem! Never hesitate to reach out if you run into anymore questions.
@ one more question. It’s been hard to find any info on maintenance. How do you go about cleaning the 46M and how often should you clean it?
@@AuburnMan The vast majority of shooters typically do not need to concern themselves with the maintenance of their centerfire suppressors. While carbon buildup is expected over time, the high pressure generated by the rounds effectively breaks down and expels excess carbon. Should you choose to clean the suppressor, a recommended method is to soak the internal components overnight in brake cleaner, followed by running a magazine through it.
I remember when mine had a nice paint job on it…
I bought one of these... I'm just waiting on the ole ATF now
Can I suppress 7.62 bullet with the 46 hybrid m
Yep, bore size is smaller than a .45
I cant find any barrel length restrictions on your guys website. What are the restrictions for this suppresor on barrel lengths for rifles?
On every product page you will find the option to download the manual which will have the Barrel Length Restrictions. Here are the restrictions for the 46M
"The 36M and 46M are rated for barrels as short as 10” for .223 Remington/5.56mm NATO, 16” barrels for .308 Winchester/7.62mm NATO, and 18” barrels for .300 Winchester Magnum and .338 Lapua Magnum. Additionally, the Hybrid 46M is rated down to 16˝ barrels for 45-70 and 458 SOCOM. The Hybrid is rated down to 18˝ barrels for all magnum calibers up to 338 Lapua Mag."
Will the dead air keymo mount fit the 46m ?
Sold me👍
I have a Hybrid 46 and I'm curious as to the major draw for this can. The short version isn't that much lighter than the non-modular 46 (although it is a bit shorter). Is there a massive selling point I'm missing?
I love SiCo stuff; I also have an Octane 45, Sparrow, Saker 7.62, Omega 36M, and Switchback. Next on the list is probably a Salvo. I'm not trying to bad mouth the can or the company so please don't take it that way.
It's modular, therefore different
I get your point perfectly, and I'm guessing you, like me have been at the rodeo for a while. But, there are so many new people getting into the game, which is good for the overall industry. This is the perfect first can, last can for the fairly new guy, 1 or 2 years in with about 4-5 firearms, and is now getting into suppressors. And also a good can for a suppressor junkie like me.
If you already have a H46, I'm not sure this is really meant for you. Basically just an iteration on the existing design.
I have the H46 as well and I've thought of getting this one as well because its so big and heavy on pistols. I already have an Omega 36 so I wont be buying this one. Though this is a perfect first and only suppressor.
Think its more for folks not already owning a 46 standard. big point is the ability to cut down size IMO that's at least the selling point for me especially if its your first suppressor and your going to hop between guns alot
All that spawling on the 40 cal hitting the water. Baffle strike?
When the ring a ding is louder than the pew pew.
Absolutely hilarious. Hopefully mine will be available in 3 months and not 9-12.
I have a henry 44mag all weather side gate which I have not fired. Unfortunately there's not enough real estate on the business end to thread it. Beautiful rifle, but tempted to sell and trade it for the x model which has a threaded barrel. Ah the dilemma as the X model is not nearly as pretty.
Same, hope this e-file isn't a dumpster fire. Heard of 60day approval for some and longer than 90 too. Buddy is at 90days now for a Surefire Mini-2.
@@mytmousemalibu Boy was that wishful thinking. Lol.
@@PoonDestroyer69 with hindsight being 20/20, yes, yes it was!
I just hit the 6th month waiting for me Osprey 9 2.0
Did I miss the 9mm handgun?
460 Rowland?
Mine is paid for.... Waiting on the feds to say I am a good guy. * Can it handle the pressure of my 375 Remington Ultra Mag?
I wonder if there's a ak Surpressor
I use my 36M on my Arsenal SLR107 and Galil Ace Gen II 7.62x39
@@bench175 Did you re thread your barrel or use keymo?
@@bench175did you have to get an adjustable gas piston for your AK’s? I have a Galil Ace in 5.56 and a Zastava M70, and I was thinking of getting a 46M once I turn 21.
Well I might just have to do a video on this soon!
Will my hybrid 46 hold up to a454 casual w/a 10 inch barrel???
Yup, good to go!
460 with 14.5" barrel?
is that like 500 dollars in mounts that go on the suppressor , or does it come with all those for 1000 dollar price tag?
Great question I wonder the same
Comes with the ASR, maybe a ⅝ direct thread with it but gotta get the rest separately.
I like knowing that, but, they are charging A LOT for not much. (If you Really think about it, they are WAY overpriced).
M for Modulable???
Yeah
Hybrid 46M. Otherwise know as The One Can or simply The Precious...
The mosquitoes lol
buy one get one free now while supplies last until Dec. 21ST.
Advantages this suppressor has over the 36M?
45 caliber capable vs 9mm? caps and baffles can handle the larger bullets vs the 36M
You can use it on 45 or 40.
Can I trade my Hybrid 46 in on this?
My Omega 300 is still in jail (7 1/2 months). The Hybrid 46M is next.
I order one I actually got to touch it but like many others waiting on paperwork from the most hate 3 letter company to come back
Nice! You're going to love it.
@@SilencerCo I hope so have so many add ons to buy a piston for a Glock 19 at least one more ARS mount
Is SilencerCo making a comeback!?
When did they go away?
Those hands are HOT!!!!
That fly noise was annoying as fuck
13 months in. 8 more fucking years to go....