WELDING TRAILER BUILD EP3 LADDER RACK
HTML-код
- Опубликовано: 19 сен 2024
- This is another part of the build on the welding trailer. I'm showing the ladder rack or material rack build for the welding trailer. Please comment and like and subscribe. #weldingtrailer #weldingtrailersetup #mobilwelding
Amazon Affiliate Links Below:
Computer/Software/Camera I use:
GoPro Hero 8 amzn.to/3Rxk0Zb
YoTilon Camera Tripod amzn.to/3egBQRx
Tools/Equipment I use:
Dewalt 4 ½” Grinder: amzn.to/3Ranzo6
4 ½” Grinding Disk: amzn.to/3COZnTR
4” Wire Wheel: amzn.to/3eeyX3T
amzn.to/3czecQ1
Wolverine Grinder 4 ½” Disk: amzn.to/3AylQlm
7018 Low Hydrogen Rods: amzn.to/3ACUD0Z
Leather Gloves: amzn.to/3cBmBm2
Welding Hood: amzn.to/3wNmHhb
Nicholson Half Round File: amzn.to/3CPNbCD
3LB Hammer: amzn.to/3ehCL4t
Fixture Clamps: amzn.to/3R9CKOu
Evolution Metal chop Saw: amzn.to/3R7LBAk
Evolution Metal Saw Blade: amzn.to/3D6eUPF
Perfect! The ladder sits up there nicely.
Thank you for watching and commenting. Yes sir that will help haul them and stay up out the way. Take care and stay safe
from the Netherlands thanks for the video
Love the channel just subscribed. I’ve been modifying a 5x8 utility trailer for a mobile welding setup and I love this rack design. With all the weight I’m adding that axle swap video could come in handy too 👍
Thank you for watching and commenting. Yes I am trying to make everything removable so if i want to go with a bigger trailer some day It will be easier to swap everything. Make sure you let me know If you upload a video of your trailer. I like to see others and there ideas as well. Take care and stay safe.
Man, that tuned out nice!
Thank you. It was a work in progress. I would do one thing then think about something else then add another thing. Take care and stay safe
Nice set up
Thank you it is working out good. There is a few more things I would like to do but so far it’s working good. Thank you for watching and commenting. Take care and stay safe
You’ll be able to haul iron upthere
Yes just a few joints of something but not much. Take care and stay safe.
You can put lights up there so if you are working at night you’ll have some light and they’ll just run off the welder or a battery set up
Thank you for watching and commenting. Thats a good idea i think at least on the one side ill be working off of. Ill need to put a plug to unplug them if i ever take the rack off. Thank you again and please dont forget to subscribe. Take care and stay safe.
Hi! I need to know what size tubing that went in the big tubing? The four pieces that was welded in the corners first was 2 1/2 in the 6’by 6’ tubing in height what size is that tubing that’s fitting that flush in the inside of 2 1/2 big tubing??
Thank you for watching and commenting. It is 2”x2”x1/8” square tube inside the 2-1/2” square tube. I hope that answers you questions. Take care and stay safe.
Nice ladder rack. What would you charge to fabricate one like that for me? I live in Conroe.
Thank you for watching and commenting. to build you a rack would depend on what size trailer you have. Material is supper expensive right now. My trailer is a 6ftx12ft and to build that rack I have 800.00 dollars in material and that isn't painted, or powder coated. So, with labor and material it would be around 1700.00. Then on that one to be powder coated it might be around 400.00 maybe a little less because I can unbolt that one. I hope that answered your question. Take care and stay safe.