2.3g, Super Micro RC Plane 만들기
HTML-код
- Опубликовано: 23 сен 2020
- * Specification
Fuselage : Styrofoam
Wingspan : 95mm
Motor : ∅4 x 8mm Coreless Motor
Receiver : 2.4Ghz Super micro 4ch receiver
ESC : -
Actuator : 1 pcs
Propeller : 29mm
Battery : 1Cell 20mah
Transmitter : 2.4Ghz Transmitter
Flying Weight : 2.30g (Flying weight, Including 1Cell 20mah Battery)
Flight time : -
* 2.4Ghz Transmitter & Micro 4ch receiver & Micro actuator & 1Cell battery... and so on...
www.Drcmall.com
www.MinimumRC.com
* ∅4x8mm Coreless Motor
www.aliexpress.com/item/32871...
* 1Cell 20mah battery
www.aliexpress.com/item/40006...
* 스티로폼 열선커터기 만들기 (초소형 비행기 & 미니어쳐 제작용)_Heated wire Foam Cutter
• How to make a Hot(Heat... 
Хобби
A knock-off. Watch the video of the Guinness World Record for the world's Smallest RC plane set 13 years ago.
I'll take a look... Thank you...^.^
Please make a simple tutorial with 9 volt mottor (not coreless because i dinr have one)and on how the transmitter works and also can you make a tutorial on how to make a controller for the rc?pretty please 😊❤!!!
Please refer to my RUclips videos. Almost all the content you want is already uploaded...^.^
I have been looking for an actuator receiver for the past month or so with no luck, and you just put a link to an awesome store on your video! Thanks so much.
I'm glad that my video was helpful to you...^.^
This man is crazy .He can make anything
Thank you for your encouragement. I will try harder for a more wonderful work....^.^
I am impressed. Good job!
Thank you... Have a nice day...^.^
Nicely done but it seems these wings do not generate lift
I think you're right. A streamlined wing can't help but lack lift...^.^
It’s good…….you don’t need to go that far to retrieve it……lol
Thank you...^.^
Beautiful little plane
Thank you...^-^
Proof that a Pringles will fly 😆
와우 ㅎㅎ 멋집니다!!
감사해요~...^.^
very very good
Thanks bro...^-^
grind off some metal from the motor shell and sand down the styrofoam parts, plastic battery connector, and carbon fiber frame
Akhir nya aku menemukan yang mudah ,':)
YES!!!!!! More please!!!! :)
Bigger eagle flies more heights smaller sparrow flies less height that is the difference between small and big planes 😉😉 nice bro u have done great job
Thank you for your encouragement...^.^
cool!
Thanks bro...^-^
You should have named the Supermicro Spitfire.
Gear drive and bigger prop will do you well. Also suggest a rudder actuator.
Thanks for the advice...I'll take a look...^.^
Nice
Thank you...^-^
Very nice, clean build!
Thank you...^.^
@@creativechannel9368 Hi my friend, we haven't seen you on youtube for a few months I was scared. I wished the coronavirus didn't affect you. We are waiting for videos from you, don't forget us.
Mustafa from France.
@@mekateknik3717
Until now, I've never forgotten the people who loved my videos, not even for a single day.
However, I haven't been able to see you for a while due to personal reasons. My daughter is very sick right now... and my mother too...
Soon, I'll be sure to greet you again with a wonderful video.
Thank you for not forgetting and waiting...^.^
@@creativechannel9368 Good recovery from their illness, I wish them. Take care of your little family is more important. I was just scared because of the virus, you gave more sign of life. when i saw a comment datahnt a few days ago i was relieved to find you again. Family is the most important thing in life, stay with them. We are all heart with you...❤❤❤
I caught a virus in my stomach too, I was crying at home in pain, the doctors accused me of faking to get morphine... Finally a doctor took my case seriously and everything was settled in 3 month.
@@mekateknik3717
Thank you for your encouragement. I am glad that you have recovered your health. I am also belatedly realizing that 'health' is the most important thing.
Always be healthy...^.^
That’s minus the actuator eh? How about trying a smaller wing chord and span. Try cutting the foam from packaging foam and thinner. You’re almost there :-D
Thanks for your advise... I'll try again soon...^-^
COOL 😎😎🙂
Thank you...^-^
아 이거 생각없이 보았는데.... 가만보니 모터 제어는 수신기로 바로 되는 건가요? 전류가 작으니깐 PWM 출력으로 바로 되는 것입니까??? 허허
🔥💕👍
A little less dihedral angle and a little longer wings will improve performance.
I totally agree with you. I'll have to keep that in mind next time I get a chance to make it again....^.^
This receiver can bind with flysky transmitter (fsi6)
It may not be compatible with normal Flysky Transmitters.
Therefore, before purchasing each receiver and transmitter, you must check with the seller...^.^
www.Drcmall.com
www.MinimumRC.com
How did you bind the receiver with the transmitter?
For this receiver(& Transmitter), no special binding method was required.
Just turn on the Transmitter and connect the battery to the receiver, and the binding will be completed automatically after a few seconds. (and then, the light of the blue LED of the receiver is slightly weakened.)...^.^
@@creativechannel9368 thank you!
@@michalis5817 You're welcome...^.^
😍😍😘😘
Thanks bro...^-^
Bro where did you get those motors they are so small
Pleae refer as follows...^.^
www.aliexpress.com/item/32871146089.html?spm=a2g0s.9042311.0.0.27424c4dtK3fFB
Nice Microplane, try to change the shape of the Wings to more like Aerofoil, and it should Fly more effectively 👍🙂.
Thank you... I will also remember what you gave me advice...^.^
Welcome buddy 🙂
Try trimming props a little, it might result in reducing torque
Yes... it could be. I'll refer to it. thank you...^.^
You should make a bigger wing span and longer body and it can fly
Yes, I think so too...
Later, I wlll try once again... thanks...^-^
@@creativechannel9368 let's do it soon
the wingspan must 15cm and body leng must 13cm
Hi !!)on the channel microbuilder plane 4g with a 4x12mm direct drive motor. I tried to make a 4G plane on a 4x12mm engine and it doesn’t fly at all, there’s not enough thrust. I don't understand why this is
I think it may be a difference in wingspan. Even if the weight is the same, the wing area must be slightly larger to be advantageous for flight.
Another reason may be the difference depending on the state of the battery (degraded performance or not fully charged).
Naturally, the size of the propeller can also be a reason for its sensitivity.
If you try again after checking, I think you will get good results...^.^
@@creativechannel9368 Thank you)). my motor is 4x12mm from the tail of a small helicopter and the propeller from the tail of a helicopter is 30mm and they give thrust from 1s - 1.4-1.9g. I think maybe the propeller is still small or the pitch is small
Hey do you have a link to where you got the reciver
Please refer as follows... ^.^
2.4Ghz Transmitter & Micro 4ch receiver & Micro actuator & 1Cell battery... and so on...
www.Drcmall.com
www.MinimumRC.com
can i use a cheaper joystick to control it
I'm not sure which joystick you're talking about,
Refer to the site below and check the 'compatibility', I think it will be helpful...^.^
www.Drcmall.com
www.MinimumRC.com
Where do you get the micro electronics
Please refer as follows...^.^
* 2.4Ghz Transmitter & Micro 4ch receiver & Micro actuator & 1Cell battery... and so on...
www.Drcmall.com
www.MinimumRC.com
The UHU glue is quite heavy.
Yes, I know... so I used it just little...^-^
so difficult to find those 1cell 20 mah battery, they were out of stock :(
You're right... I was also able to find it with difficulty through an acquaintance...^.^
@@creativechannel9368 Get in contact with the supplier company today, they say they will inform me of it when they get it back to storage, but it will take long, because such tiny battery earns too little profit :(
@@HawxWon
It's not that we don't understand the vendor's point of view, but it's true that sometimes we get upset...Hope you find a good way...^.^
Its sad to see drcmall is closed. Any information on what happened?
As for why, I don't know either.
How about the site below? did you look for it?
Hope this helps...^.^
www.MinimumRC.com
@@creativechannel9368 I have found that one as well. I was a little concerned for the owner of Drcmall, he hasn't been very active on the rc forum for a while, wanted to check in and see if he was okay.
Hard to tell but loks a little tail heavy.
Maybe it's because the position of the battery has been pushed back a bit... Thanks...^.^
Potato chip wing possible?(pringles wing)
Ha ha...That's very interesting idea. I want to give it a try someday...^.^
Receiver and transmitter link?
Please refer below...^.^
* 2.4Ghz Transmitter & Micro 4ch receiver & Micro actuator & 1Cell battery... and so on...
www.MinimumRC.com
Umm i like it but i made it was soo heavy not flying what can i do please 🥺 tell ,😭😭😭
I don't know what materials and parts you've made, so I won't be able to give you an exact help...
However, I think it's important to say, "You have to make it as light as possible in any way"...^.^
Thanks
donde puedo comprar los aditamentos eléctricos ?, saludo cordial desde Acapulco Guerrero México.
For information on where to purchase the major parts used to build the airplane, please refer to the memo section at the bottom of the video above...^.^
Can you list the receivers you have on ebay or Amazon. I already have an account with them.
I haven't bought it on ebay or on Amazon...
Please refer to the site below...
* 2.4Ghz Transmitter & Micro 4ch receiver & Micro actuator & 1Cell battery... and so on...
www.Drcmall.com
www.MinimumRC.com
@@creativechannel9368 thanks
can i buy one
Sorry, I just like to make as a hobby, but I don't sell them...^.^
Cagata
Tail heavy
Yes... I think so too. I'll have to be more careful next time I make it...^.^
How much?
For specifications and price information for each part, please refer to the comments section below the video...^-^