Will a Gas Engine Run on WD-40? Let's find out!
HTML-код
- Опубликовано: 6 сен 2024
- Will a Gas Engine Run on WD-40? Let's find out! In this video, I attempt to run an engine on 100% WD-40. Thank you very much for supporting the channel!
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC
Neighbor asked " what are you doing?"
Answers " killing mosquitoes"
lol. Thank you
Project Farm your welcome
Hahaha
Neighbor asked whatcha doin man
Seeing if I can create something that smokes as much as you!
If you spray wd 40 onto a bunch of ants it kills them
Your workshop is every lawnmower engines nightmare.
Funny! Thank you
No lawn mower is safe in Project Farm territory!!! Makes for some great videos though!!!
Those Briggs flathead engines really prove themselves in Projectfarm’s brilliant videos.
@@gheckopoint8846 them Briggs are indestructible
Side room from Toy Story for lawnmowers?
Yes finally i can mow my lawn & piss off the neighbors at the same time.
Drill the muffler out ;)
untouchable, light after darkness use a v8 powered mower
Just put on a shirt and they won't be so pissed you fat slob.
KM, also fumigate the insects and prevent frost-freeze on your plants!
Remove the muffler from your lawnmower and replace it with a piece of straight pipe, that should piss them off pretty well. Also adding two stroke and burning it in a four stroke engine will make it smoke.
My lawn mower quit working so started watching a Farm Project video. Now i only have to nod at it and it will start itself.
lol
Im curious about whst it does in a diesel engine
Thank you for the video idea!
A diesel will run on almost any oil based fluid it can get through the injectors
Skidin Dingo that’s what I was thinking cause it’s more likely to work better
Me too
@@JoeEric3 did we ask? NO!!!!!! #!!
I am a commercial tire technician. I was once on a job site. And just as I was finishing my compressor ran out of gas. I had a can of WD-40 I sprayed it into the tank for about a minute. I restarted my compressor and was able to build up enough air to finish the job.
Awesome! Innovative thinking gets the job done.
Project Farm Sounds to me like the line between innovation and desperation is a bit blurry ;P
shadrock99 I know right, he got the job done without damage to the compressor. Good work.
@Montana fishing Fun only a moron would post a comment like that ! He's teaching people! Good on him! You're the kind of boss id punch the crap out of just like some of my old bosses who thought they were so smart but don't know which way there ass is pointing!
edmond ugljesa that’s how you get to prison
I dont think the military will employ your instant smoke screen device
lol. Thank you
they didnt market it right! its not only constant smoke screen its also a fantastic noise maker to distract the enemies!
I actually had to think of a way to make a smoke generator during desert Storm I used transmission fluid I didn't even think about WD-40 lmao
@@danieljonhson6367 / what was your method?
Yeah, it's a little loud
Fun fact: Some diesel injector/engine cleaner additives actually contain the same product as WD-40 !
Maybe you should try WD-40 on a diesel engine...
Thank you for the video idea!
@@ProjectFarm could get expensive, but I'd like to see it
It works but you need an old diesel engine the newer one aren't as capable as the old one
Worked in my XR400R
It even looks cleaner afterward at 6:12.
I'm gonna give it a go. I used acetone in the past. Or brake cleaner this winter. Lowering the flashpoint too much may suck during the summer.
Engine almost knocked more than a Jehovah witness at the front door
Motley Crue Morris very relatable
Knocked more than Chuck Norris knocking out zombie teeth!
I have not expected that you have the same problem with Jehovah witness like me in Poland. Obviously your comment is really funny.
@@ProDigit80 thats a good one lmao😂!! Gotta love Chuck norris!
Banged more times than a cell door
I've used it to start engines for years with no problems at all. Just make sure it uses the flammable propellant.
Thank you for this recommendation.
Yes, great starting fluid for small engines, safer and easier on them than ether.
@@TheOldGord You obviously have not tried this lately? The absolute best starting fluid is 50:1 mix. Think about it.
wd 40 in a diesel engine
Thank you for this recommendation.
i say this because as you said it's more like diesel than gas
WD-40 is a pretty good starting fluid for a Diesel engine. It’s safer than ether
Its closer to kerosene than diesel
WD40 makes a good starting fluid for diesel. I've used it a couple of times for that purpose.
This is one of my favorite series! I have a suggesition. How about to see if an engine can run on embalming fluid? From wikipedia: Typical embalming fluid contains a mixture of formaldehyde, glutaraldehyde, methanol, humectants and wetting agents, and other solvents that can be used. The formaldehyde content generally ranges from 5-35%, and the methanol content may range from 9-56%.
Run the WD-40 as Oil and as Fuel the same time
Thank you for this recommendation.
Like a 2 stroke
Done, I was a recomendation for this test because Ive done it in a 2 stroke weed eater, but I didnt need to choke it, or maybe I forgot de choke on maybe?
Ur looking for an explosion 😂😂
I'm still waiting will a Nitro engine run on gasoline
*starts engine on wd-40*
*the state of Ohio (or wherever this is) warms up 3°*
Cool video, I've been waiting for this one!
Thank you!
We could use the extra 3 degrees some days.
@@katieandkevinsears7724 right
Have you thought about doing Muffler tests on these small engines? like making a muffler with a coffee can full of steel wool or something.
Edit: use a decibel-meter If you have one on hand.
Thank you for this recommendation.
I was wondering about making a muffler with rock wool as a lining or maybe some sort of bubbler type of muffler. It should absorb sound and polution too
@@aronbraswell1589 AMD Cool'n'Quiet, but without the AMD, or the cool.
I have watched literally hundreds of videos on this channel over the years! I e learned so much. Thank you SO MUCH Mr Tom! 😀
You are welcome!
I didn't expect it to run on WD-40, but once it started it seemed to make a pretty good old school anti mosquito fogger. Liked the video a lot as usual. Keep up the good work. Love the slow motion shots. *XD*
LOL! Thanks for the positive comments.
Fog and mow at the same time :)
You can create a smoke screen just like James Bond.
Those slow motion shots are a thing of beauty. You’re the lars von trier of small engines
Thank you!
A thing of beauty when you understand the complexities!
where's all the smoke coming from, is it a forest fire??
"nahh just some guy running his lawn mower on WD-40."
I.. I never **knew** you could run an engine on WD-40.
"Neither did he... that's why he did it."
LOL! Thanks for commenting.
If you ever want to acquire all the liquid from an aerosol can, you can use a GI P38/ P51 can opener to open the can along the top near the bead. I have done this when a can no longer has propellant, or want all of the product inside without spraying forever ;) thanks for another great video!
Told my girlfriend I’m busy the next 8 minutes don’t bother me.
LOL! Thanks for commenting.
Tell her I will keep her busy while she waits for u lol
Bad boi 🤣🤣🤣
Bad boi She likes it longer than 8 minutes so she wouldn’t be interested, sorry pal.
the8jrfan lol only joking with ya bud good man for being able to take a joke 👍
Please Turbocharge that lawnmower :) just for fun.
Thank you for this recommendation.
Adheesh B z
Adheesh B do it
Idk if adding power to a knocking engine is a good idea. Lol
Adheesh B wow nice idea dude even add a nitrous bottle to that poor thing.
can we get a video on running an engine on coleman camp gas? or maybe bbq lighter fluid? I say camp gas, that stuff burns HOT
Thank you for this recommendation.
Coleman fuel is 100% naptha, as in the chemical that raises the octane rating of gasoline.
Most lighter fluids are watered down kerosene.
@@vector6977 Strange...all the charcoal lighter fluid I've ever seen is just mineral spirits.
Project Farm how about running diesel through a gas engine
The germans used gas at a camp.
Not many people liked it.
And that's how I killed every bug within a fifteen block radius
Well I sure didn't expect this to work at all!
Thanks for commenting.
deweys It's perfect starter fluid for TWO strokes...
Project Farm LOVE YOUR STUFF BRO!! :)
You must not have ever owned a carbureted vehicle
Jefferson Graves You mean for first comment not me, right?
Can you use axle grease instead of regular oil?
Thank you for this recommendation.
That's not going to end well.
Bigelow Brook Farm (Web4Deb) I want to see that vs ATF
Pre warmed up and somewhat fluid would probably be okay. Cold and gooey, nope.
Bigelow Brook Farm (Web4Deb) be fare under normal circumstances it would start off cold and hard
Try putting a turbo on a lawnmower!
Thank you for this recommendation.
Joel M done it. The engine didn’t last long. Got very hot and seized. The turbo was bigger then the engine though.
Nobody:
VW TDI engines: 4:15
I resemble that remark
Funny
this was blown out of proportion like crazy.
Mine only does this on start up if it’s been on the meth and too much has got in the intake. Once started it’s runs fine though.
replace oil in the crankcase with diesel because diesel is like oil, and see how long it will last
Thank you for this recommendation.
That’s how some people flush their engines. Should be OK as long as you idle it low and don’t put a load on it.
This
Take 2 cycle oil and add it to the crankcase to see if it is a good substitute as motor oil.
Thank you for this recommendation.
The exhaust is slightly less smokey than running on wd40.... don't ask me how I know ;)
Would be pretty entresting too see that and if it would give enough protection from cilinderdamage
Jadedragon327 do that for years
Have you ever tried running engine on car dashboard cleaner? In Poland we have relatively cheap "Plak" and many people use this to help to start engine
Not yet. Thank you for this test recommendation.
This sounds too odd to work, but it would be interestingly different lol
We use the same in lithuania
irocket z tego co mi się wydaję to nie powinno być problemu
irocket
I'm sure the cleaner will contain silicone which damages catalytic converters.
How about using diesel instead of oil as a lubricant?
Or moonshine as fuel or a moonshine gasoline mixture
Thank you for this recommendation.
He did Everclear as fuel and thats pretty much moonshine.
Have you thought of running a two stroke? The smoke made me wonder if a two stroke motor would run on straight WD 40
Yes, I've got 2 stroke videos coming in the near future.
I used to mix marvel mystery oil in my gas when i rode two strokes. I did this in addition to the oil in the oil injection system..
Moontanman 2 strokes run better on wd40 then 4strokes.
2stroke2smoke 2 strokes run better than 4 strokes because 2 stroke has a higher compression ratio usually.You can make the 2 stroke to run on diesel easy.You just have to increase compression ratio ( not the psi) close to the compression of a diesel.It will get verry hot fast thogh but the power its crazy ,like a diesel torque and a 2 stroke Rpm .Ive done that by shortening the cylinder a few mm(calculated verry well) to increase the compression ratio .
Try jack Daniels
Thank you for this recommendation.
Was thinking about this too
@@ProjectFarm have you tried 151 (whiskey) ?????????
Albert Hendershot 151 is rum. But that’s a great idea. Jack Daniels probably isn’t strong enough proof to run the engine.
Yea man!!
The guys in the breakroom here at the plant really enjoyed that test.
Awesome! Please say hello and thank you for me!
So did this girl while tanning in the sun ☀️
Try rubbing alcohol and compare a 30% 70% and 90% mixture on power etc
Thank you for this recommendation.
Would be interesting. Around here, isopropyl rubbing alcohol is sold in 50%, 70%, 91% and 99%. Though I'm not sure 99% is all that useful for "rubbing". What do people rub with rubbing alcohol, anyhow? I always used it as a solvent/cleaner. I also came across some *ethanol* rubbing alcohol at the .99¢ Only Store once. Did double take on that one. Turns out it was denatured to make it undrinkable. No cut rate Everclear here! :(
How does rubbing alcohol compare with nail varnish remover/acetone? Acetone has a different molecular structure which i think will run cleaner...
Hey project,,,, 4 oz of Dawn dishwashing detergent,,,,, added to one gallon of gas,,,,,,. See if it helps clean off carbon,, ??? Since gasoline is supposed to have detergents in it , ???
Thank you for this recommendation.
Do this
Yes, you have to do this one, great idea!
Rick Simpson a couple drops should be enough right ? Since it's concentrated
Rick Simpson Wrong kind of detergent! Gasoline additive looks like tar. At the rack, I saw some "tar sickles" hanging from a line that was hooked up to the MOBILE additive tank one time. The stuff you buy in the store like STP is highly diluted with kerosene, naphtha, or some other oil based carrier.
If that bottle was pure additive it would probably do about 5000 gallons.
4:40 sophomores in the bathroom
Be like
Whats the name of this music please tell
WD-40 is a good starting fluid for diesel engines as it wont wash the cylinders, while if you use too much ether in a diesel, it will wash the cylinders and damage the cylinder walls
Thank you
Thank you for doing my request!!!
Thank you for suggesting this idea. It was a fun test.
That things smokes more than a fan at a Grateful Dead concert!
Try WD in a Diesel engine!
Funny!
Probably at least one viewer here was tempted to "vape" that exhaust.....try running the mower from hemp oil or CBD!
Try converting a lawnmower to run in diesel then test the power
Thank you for this recommendation.
Likely impossible to convert due to the compression required for diesel to combust. As well as lack of direct injection and the short stroke gas engines have when compared to diesels.
You created a fog machine, well done!
Thank for watching!
“A lot of smoke not a whole lot of action”
Must be a powerstroke
powerstroke? I think you mispelled cummins
Or duramax
Or duramax
Savage level 112.7
Hahahahaha!!!!!
I always enjoy your videos! It reminds me of a Bill Nye The Science Guy meets the home mechanic. lol
Science rules!
LOL! Thanks for the positive comment.
Oh it's a compliment alright.
Bug off, Joe.
Love your work, brother. All your videos are super detailed, unbiased and informative. I wish you good health and success.
Thanks so much!
The slow motion smoke and gas tank with the Etude in A minor in the background was just beautiful man * sniff * keep up the good work. You should get a small engine crankshaft dyno to measure power output under different conditions. You could test all sorts of products and fuels .... and even do tests over temperature and humidity to see the change in power output.
Thanks for the suggestion.
Will it run on hairspray ?
Or axe spray deodorant
Thank you for both of these suggestions.
I second hair spray. It's cheap, and it was my preferred "fuel" for launching potatoes years ago :)
Wd40 makes a good Diesel engine starter fluid.
Have you tried Diesohol in a diesel engine? Which is 70% 200proof alcohol + 30% motoroil or vegatable oil?
Never heard of it. Thank you for this recommendation.
You cant purify alchohol to 200 proof because thats 100% alchohol and alchohol atracts moisture. (Why you can get moosemilk to stay and any proof for very long unless its sealed
There is a process using adsorption that can produce 100% alcohol. It uses zeolite, and a process similar to column chromatography. Alcohol was also synthesized to 100% before that, but at a ridiculous cost so even then you could say there is no 100% alcohol, but not anymore.
ipissed exactly, also the blend will work with 95% alcohol
ipissed never heard of that before i thought that you could get a max at about 96-99% thank you for correcting me
Im impressed that it started.
When starting diesel engines alot of companies recommends using wd instead of starting fluid, but never got it to work.. always ended up using starting fluid.
Thanks for sharing.
Awesome Video! May I suggest in a future you try all this stuff as alternative fuel but with a diesel engine? there a little to none videos about that, I wounder if a diesel engine can run on WD-40, paint thinner and those other stuff you tested in old videos ;)
Thank you for this recommendation and thanks for the positive comment.
MauroXtremeGamer ,,, on the farm we put our used motor oil transmission fluid brake fluid power steering fluid,, hydraulic fluid,,, just about anything in the diesel tank,,, no problem whatsoever,,,. Fuel filter picks up the contaminants,,,. 5 gallons of gasoline,,,to. 50 gallons of diesel,, is what the truckers that hauled steel up Jellico Mountain used. ,. !!!!
@@ProjectFarm
THIS!!! You can get a cheap Chinese clone diesel engines for cheap! Or get an old Kubota diesel APU out of a junkyard!
That's good stuff to use when looking for intake leaks. With engine running, spray around induction system. If it changed rpm, you found your leak.
This is a great suggestion. Thanks for commenting.
The Icemeister's UnGarage
Unless it eats some types of paint...
Or if it meets an oil seal of some sort.
behemothfan666 F T P
I have a flashlight for oil leaks. Easy fix if you can find them. The blue light makes oil fluoresce green on a fresh leak. BAM! Found it. Fix it. No more leak.
behemothfan666 F T P
What do you mean? Oil seals that leak need to be changed anyway. WD has never caused one in my experience but I only use it as it was intended.
Can you test stuff on a Diesel engine
I hope to acquire a diesel soon. Thanks for commenting.
Project Farm we have about 50 or so 3 and 4 cylinder diesel engines laying around in Washington state. They are old refrigerated units for semi trailers. We can donate one if you have means of getting it. Message me if you'd be interested.
APUs and Reefer engines wouldn't be a bad idea. Smaller than even a pickup truck diesel engine. I know they also make diesel powered lawnmowers, but last one I saw I delivered to a small engines sales and service place and the lawnmower went for $18,000 sooo... not exactly cheap.
Project Farm
DI & CRDI experiments should get you a lot of views from around the world. As diesel users are usually very keen about their engines
Our MVP right there, helping out the other Players and keeping the game interesting. Thanks for your kindness !
I used it to start engine's that sat for a long time. It works for starting flued won't dry out the rings.
Hmm looks like a lot of smoke coming from the exhaust? could be burning some oil?
Great point.
Probably fine
A little less smoke, if you please? A lot more power is what I need!
lol. Sounds like a country song!
@@ProjectFarm I'd listen to it 😂
🎵Let's get on down to the main attraction with a new experiment and some cool mower action🎶
You should try running a engine off another engines exhaust fumes because sometimes engine don’t burn all the fuel and it comes out in the exhaust
Thank you for this recommendation.
Not if the engine is tuned
Jacques Bloques you see his bath house car build? Lol garage 54
I literally cannot stop watching your videos. I watched a video about the best epoxies and now I’m trying to figure out what fuel can or can’t be used to power a lawn mower. I love your videos
Thank you!
Deputy-Fourty haha.
Love your channel though you are awesome!
When at my moms place we have good fun watching (2 and 4 stroke bicycle conv. kits our fav. 2 vids!), We can nerd for hours and then i end up going home at 3AM because we ended up having dinner at 12 from all the nerding, then nerding more. She really enjoys you, and I do too. Thanks for what you do. You have great ideas.
lol. Funny! Thank you very much for the positive comments and great sense of humor!
I'd like to see a chemist on here describe the possible reactants from that kind of combustion.
Same lol
Try russian vodka
Thank you for this recommendation.
That engine will get too drunk id say
He tried alcohol before and it run but requiered rich mixture.
No no no canadiam moose milk
The pretty music playing as the engine blows the smoke just cracked me up. Whoever does your editing is brilliant and has a great sense of humor.
lol. Thank you!
Ahh, I remember when Trabants were driving around in my city. Had very similar smoke, maybe more blue tint, but it smelled glorious!
Von wo bist du?
@@fesa_performance9617 Czech republic.
@@IlGonfaloniere Ah ok, sorry for speaking german. I thought you are german, because of the trabant, but i forgot it wasn't only used in this country. Greetings from Austria
@@fesa_performance9617 No problem, I understand german a bit.Have a nice day.
Is possible to run an engine using gasoline as an oil??
Thank you for this recommendation.
I doubt the viscosity would be correct. You can run an engine with no oil lol. It just wont last very long
if you want to destroy your engine, yes.
@@ProjectFarm this wasnt a recommendation dumb ass!! Actually read his comment!!! Was a question. And the answer is NO. Theres just some people that know common sense and dont have to make a video about it.
No, it is no possible to do that be he will sure make a video. He will do anything for viewing hits. Back to your question, gasoline is the fastest component to lock a motor up tight when it gets into the oil crankcase. Happens all the time on mtd riders when carb float fails, allowing gravity to flow fuel into crankcase. An oversight on design. It will crank, and run a bit but smoke so bad you cant see, then lock up. Doesnt usually harm engine, simple drain and refill with oil and back to normal and of course fix the float issue immediately
That was very interesting to see on the see threw engine how little it burned off. On the test mower was that wd-40 building up on the deck or crankcase oil. Once again another great video. Love them slow-mo shots. Keep it up.
That was WD-40 on the deck coming out of the exhaust. It doesn't get used up inside the engine.
I'd love to see your shop setup. What I've seen so far looks amazingly organized.
Thank you for the video idea!
this channel is about burn baby burn. If it burn, it's here.
lol. You're right!
Napalm as fuel? 🤔😂
Napalm is made with gasoline
Napalm is jellied kerosene. Would not flow. It's jellied to spray and stick to foliage while burning.
wreckandraceify and Vietnamese children too
Patriotic American you definitely aint wrong 😳
When you tested the engine power the choke was still on
he should redo it
Yeah I think he should redo this video also.
he had to have the choke on for it to stay running
He requires a richer fuel mix which is why he has the choke on, otherwise the engine would cut out.
He should've experimented with the choke to make the mixture leamer, as it was running way too rich.
Kept waiting for the piston to appear outside of the engine block. lol
Thank you for the slow motion shot of the see through engine!
I am so tired of trying to explain the exhaust stroke to a friend.
Now he can see it for himself. lol
Thank you!
Can't wait till you are more popular
Thank you for the positive comment.
Project Farm dam that was fast u really read your comments but have you done a vide were you put regular gas in a 2 stroke engine if I have not please do it please
Straight gas in a 2 stroke will cause significant cylinder wall and piston ring damage, likely in less than a minute. The longer it runs, the worse it gets, ultimately seizing and possibly breaking the connecting rod. Good stuff.
Straight gas in a 2 stroke will cause significant cylinder wall and piston ring damage, likely in less than a minute. The longer it runs, the worse it gets, ultimately seizing and possibly breaking the connecting rod. Good stuff.
thelondonbroiler that's not good
Now we finally found the cause of global warming! XD
Does anyone notice that its the end of a ice age.
Boeing 737-7H4 Southwest Airlines No, it’s not, to the contrary, we should be in an ice age now! The Sun is actually in it’s low point of brightness.
@@GRBtutorials and the sun is warmer than it was during the ice age causing the ice to melt.
@Red Stoner because I want to make a actual channel dingus
@Red Stoner and it's pretty sad your just targeting my opinion and stalking this comment just to be rude.
How about dirt in gas
Thank you for this recommendation.
Hey project farm please tell me the name of the music you play in the slow motion burning of WD-40. The minute is from 4:39 too 5:11. Do tell.
Dubbi dee forti
lol. Thank you!
Run an engine on hairspray fluid..
Thank you for this recommendation.
wd40 originally was edible fish oil
This is interesting.
That's absolutely not true. That was an internet meme that was around about 10 years ago. Wd40 is pretty much kerosene.
@4:00
It’s like a 2-stroke having a fart attack. 🤣
I think you just single-handedly increased global warming by half a degree.
Right on, l find alot of these videos interesting but I do think most of these tests are extremely hazardous to the environment.
His lawnmower running is the last thing you need to be worried about concerning global warming.....dont like it dont watch :)
@@Gruggggg Who cares. Hes having fun
Thats not at all how it works lol. You should see what has gone on for the last 200 years lol. They used to burn literally tons of coal in steam engines for about 100 years straight.
I wanna run my car on this to drive past a climate change protest.
You should do it 👍
* Greta Thunberg has left the chat *
Your videos are fascinating. Really enjoy the clear engine. Never thought WD40 would actually combust.
Thank you very much!
You can use it for starting fluid. Also it looks like it cleaned the cylinder fairly well.
Thank you!
The best part of that. No skeeters was around with the lawnmower running on WD-40. You could almost see them little boogers packing up and moving. 😂👍
Thank you
Great starting fluid
Thank you
Never thought a cinematic of a lawn mower performing as it should would be so nice.
Thanks for the feedback.
Always great videos,
I have a Honda izy, its 13 years old, no service and always ran it on a waste oil/gear oil gas mix never any problems and always starts
Thanks! Thanks for sharing.
Please help some of us Motörhead’s out here... I always thought that a less than desirable “engine compression test” meant that the specific cylinder meant it was bad due to ring or valve failure. However, the way that you test your engine compression tests leads me to believe that no metal has been worn down and no blow-by is occurring. So for instance you run a motor on gasoline and it registers 103 on the compression. After running the motor on WD-40 for instance, it runs at 98. Would you please give us a very quick tutorial on how certain fuels create certain compression tests and what each psi rating means to each test? Thank you sir and keep up the great work/videos
Thank you!
I once drove an RV a few miles home when the fuel pump failed by spraying WD-40 into the carburetor. It was a van front end so with the engine cover off, I was able to spray WD right from the driver seat. I had the straw on it to make sure it got into the carb, didn't want to set myself on fire. Would do about 30MPH on WD and was cheaper than a tow.
Nice!
never knew these had an engine brake. learn something every day.
Thank you
Can you test “engine restore” on your old Italian diesel generator that you described as “tired”??
Thank you for the video idea!
The slow motion and music was cool. I bet the neighbors liked the smoke.😆 I buy the gallon jugs of WD-40 and put it in a spray bottle, it’s a lot cheaper.
Thank you very much!
Brake clean works as starting fluid quite nicely in small amounts.
Thank you for the recommendation!
I wonder if this is a good replacement for 2stroke fuel
Thank you for the video idea!
I once mowed my yard by emptying a can of brake cleaner into the gas tank and pouring in a some 2 cycle oil cause why not. I needed to mow before a storm and lived pretty far from the gas station. It worked pretty well. The mower was fine when I switched back to gas.
Great!
The slow mo thing was sick.
Thank you!
That Swedish teen environmentalist puppet is definitely a subscriber. Lol. Great vid. Cheers
Thanks for the sub!
Your slow motion clips really add a great extra to all your videos 👍 and the clear cylinder head is fantastic.
Thank you!!
Don’t know why I enjoy watching a lawnmower run, especially when I avoid mine at all costs!
Have previously done a propane conversion with great results. Wonder if you could run an engine on hydrogen gas?
Also an old Great Depression era friend used to tell me you could add up to 10% or so mist of water to the gasoline spray in the carburetor and get a cleaner, higher compression engine.
Thank you!