Nick, first of all I'd like to say, " you can tear up your house" inside and out! I will try and find a more recent and pertinent video to contact you with a question. ...I bought a Cheerson 95S from lightake, over a year ago. It came frt, with a orange fysky transmitter. Is there anyway you could help me bind this??? I would be forever grateful and will owe you one. You seem like a very nice, patient and genuine guy. Good luck to you and your family and if you do see this and actually try and help either way I thank you for making some informative and no drama videos. Take care!
List of differences I noticed that you didn't mention: •The numbers on the board on this one •different looking board overall •different IC chip •Slightly Different button spacing •no corner buttons on tx •Different tx beeps •Also sounds different, almost louder I think it has better motors tbh
Some I do agree I didn't include, but I do believe I read the numbers from the board, discussed the overall different appearance and better thrust. All good points you have added, thank you
The boldclash bh 03 bwhoop pro is by far the best "whoop" style quad out there. It has the most power, it has a plug for an aio camera, it uses the bayang protocol and on ebay they are $16. With the multiprotocol module it does manual flips like its in acro and it uses 7mm motors. Its just my opinion.
Hi Nick, i got one on order and just recently received my devo 7e. I hope that it can be deviated soon. Your other videos and comment on the lemonrx made me get the devo aswell. Just looking for fc options now.
I think its primarily the motors, the props look identical and the frame changes are slight which could improve it, but not as much as we see, as compared to the stock E010.
Hi Nick, yep the range can suffer. The way the antenna is routed in tx, the antenna is shielded by the board and our hands holding the tx. The inlet from the ducts is also slightly different from E010 / H36 and it has for sure motors with more lift. Board layout completely different with some surprises. See here www.rcgroups.com/forums/showthread.php?2797606-Furibee-F36-a-E010-H36-killer
Very thorough review. Deviation would be a great treat. I am wondering when the day comes when a manufacturer starts sending early production samples to Goebish and others in the group.
lol. I wondered if that would come up. Nothing exciting. I took my kids to an indoor play place. They stamp the kids and the parent with the same number to ensure the kids don't leave with anyone they shouldn't. It used to be invisible but now not so much and it doesn't wash off well either.
Nick Burns good Idea of them. Great that you announced the q85. So excited to watch your build video. Can you please also add a extra couple of minutes to review a few lipos? wish you nice Christmas Time n holidays
Yea the Q85 has been a long time coming. I made a classic mistake and only ordered 4 ESC on my first batch. And sure enough had a bad one. Then they went on backorder...for 4 weeks then 3 weeks to get to me. I have been flying it and tuning. Its fun. I can add some subjective thoughts on my 2S batteries. I have a big batch of mixed batteries coming from mylipo.de also.
Nick Burns oh yes i read the issue you wrote it in RCGroups. I burned my first piko. solderpads just so tiny. Got a new and after xmas i'll start a next try.
Burning stuff up hurts the heart, all the excitement builds then up in smoke. A killer crash isn't as bad as smoke before flight.FlexRC pico x will be next build when the motors show up, I see its now called the Pico Owl and then V2, I have V1. I now have heaps of 6A RS ESCs. Pico X will have the ESCs from his webshop.
I think its more punchy than stock E010, even close to the upgraded motors I am using on my custom e010. I think the yaw rate is more aggressive than pitch and roll, it doesn't feel like they match up very well. So far I haven't had any durability issues with the frame either.
Are there any better batteries for the stock connector? Or do you think it's fine with the stock battery? And does that multi-port charger you linked work with these batteries?
Even with the added weight of the cam/vtx I think its good. I think the only thing we can get from alternate batteries would be longer flight time, but that will like come at a cost to agility.
Probably in this category. As for long flight times, there will be a limit to weight of battery and max thrust available, where a bigger battery won't yield much additional flight time.
Nick Burns Yeah I remember someone tested a bunch on one of the clones and 220mah 15c was the sweet spot (with 2-blade props) Furibee seems a little different from the other clones though. Are there different battery sizes available? And have you tested the JJRC H36?
Hey I wanna try to make one too:) any tips? Where do i get the connector for the camara? and what goggles would you recommand? Im really poor so cheap once if possible:D
You don't have to use a connector, I do sometimes because I plan to move the camera to another quad. Otherwise I would just solder the camera wires directly to the backside of the battery connector. The hobbyking cyclops goggles are good and cheap, but shipping might get ya, other wise the furibee vr-01 from gearbest.
Ok and thanks for replying. I would like a connector aswell i think because then i can try it on other quards. How can i find them? Would it be a "big/too hard Project" for a noob to maybe add some bigger motors for some more speed/fun or something like that?:)
I get the connectors from ebay. I think they are jst-ph 1.25 2 wire, but check around and match the picture to what you need. Putting bigger motors on will require some risky modding as the motor mounts would need to be cut out and new ones fashioned. The furibee has pretty good motors, but a slide in upgrade might be the readymaderc strix motors or spintechs or micro-motor-warehouse motors.
Great price here - it's for 10.99 USD couponsgearbest.com/2017/03/07/furibee-f36-rc-quadcopter-active-coupon-price-gearbest/ I hope it will be useful ruclips.net/video/i5P4L2T8IMg/видео.html
Has anyone noticed how long the antenna is in the controller. On mine it's about 77mm. My understanding is that the antenna should be about 32mm for the 2.4 frequency. Do you think that modifying the antenna would add range?
If the wires are still well connected, we will need to change our the motors. I would expect to need to change all 4 unless you are able to replace the bad motor with an exact replacement.
Hi, i need some guidance. I received mine today. After few flights, one propeller's motor did not turn off. It keeps on moving. Only when i took out the battery then it stops. Any idea how i fix this problem?
Arcee Moron The inductrix binds to a a spektrum transmitter (or a taranis with a module) and has way better parts support, so I think it's worth it. But hey, you do you
the furibee board sux for fpv. the yaw is fast and delayed. i used the furibee motor and frame but a eachine e010 board and rakonheli triblade. best cheap set up 🖒
Great video! I was looking for a how to for adding a camera to this little guy. Thanks for being so thorough
Thanks. Have fun.
Nick, first of all I'd like to say, " you can tear up your house" inside and out! I will try and find a more recent and pertinent video to contact you with a question. ...I bought a Cheerson 95S from lightake, over a year ago. It came frt, with a orange fysky transmitter. Is there anyway you could help me bind this??? I would be forever grateful and will owe you one. You seem like a very nice, patient and genuine guy. Good luck to you and your family and if you do see this and actually try and help either way I thank you for making some informative and no drama videos. Take care!
hey man these "will it fpv?" shows are pretty cool.
thanks
I love this quad, I just wish I could fly it with the multiprotocol module.
If I recall correctly this uses the bayangtoys protocol. Have you tried that one?
List of differences I noticed that you didn't mention:
•The numbers on the board on this one
•different looking board overall
•different IC chip
•Slightly Different button spacing
•no corner buttons on tx
•Different tx beeps
•Also sounds different, almost louder
I think it has better motors tbh
Some I do agree I didn't include, but I do believe I read the numbers from the board, discussed the overall different appearance and better thrust. All good points you have added, thank you
+Nick Burns I am buying a f36
receiver and I wanted to know if it will bind with e010 remote. Answer me fast I need to it
It will not. Different protocols.
The boldclash bh 03 bwhoop pro is by far the best "whoop" style quad out there. It has the most power, it has a plug for an aio camera, it uses the bayang protocol and on ebay they are $16. With the multiprotocol module it does manual flips like its in acro and it uses 7mm motors. Its just my opinion.
I haven't flown it, but as this F36 is about 16months old I would expect newer models to have improvements.
seems like ur getting good flight time with fpv with the f36.
Yea, it does pretty well.
thnx for the review! was , bought 3 of them.... and a second VR01 goggle... for in house FPV competitions with my kids! Gonna be "epic"
should be fun
Nice review, RTH is also on the E010 tho doesn't work like all toys without GPS
True
Your cat seems quite accustomed to the ¨little annoying flying critters¨!
Wow, good review, raw and clear.
I've ordered one immediately.
Thanks.
John
Very nice Nick. Am starting my video on it tonight. Will steal the mini fpv cam from the CX117 to FPV it haha.
Thanks. I presume the FX798T, as that's what is in my cx117 kit? Haven't started that one, we are under a nice coat of snow.
Nick Burns Yeah, hopefully I'll be able to get it up an running today. I might print some guards for the 117 to fly it indoors.
Have you had any luck finding the protocol? Thanks for the video footage😎I ordered a couple.
I have not. We will need someone with a capture tool...I don't have one.
Nick love your videos. Can you do a motor lift test for the F36 to see how it compares to the other 8 motors you have tested.
ah, that would have been a good one. I would have to get another one, I gave this one away. :(
Hi Nick, i got one on order and just recently received my devo 7e. I hope that it can be deviated soon. Your other videos and comment on the lemonrx made me get the devo aswell. Just looking for fc options now.
devo 7e and 10 are very flexible, especially with a 4 in 1 module.
That's some crazy thrust. Do you think frame has something to do with that or is it the props?
I think its primarily the motors, the props look identical and the frame changes are slight which could improve it, but not as much as we see, as compared to the stock E010.
Looks good, You're cat is pretty chilled all my cat's hate my e010!
Its an act. He is sneaky, acts chill then swats me down. :)
Anyone else catch yourself answering Nick's questions, like, "Where are my scissors?".....LOL
lol. I tend to leave a lot of my thinking and "normalcy" in the videos.
Just ordered one.
Hi Nick, yep the range can suffer. The way the antenna is routed in tx, the antenna is shielded by the board and our hands holding the tx. The inlet from the ducts is also slightly different from E010 / H36 and it has for sure motors with more lift. Board layout completely different with some surprises. See here www.rcgroups.com/forums/showthread.php?2797606-Furibee-F36-a-E010-H36-killer
Very thorough review. Deviation would be a great treat. I am wondering when the day comes when a manufacturer starts sending early production samples to Goebish and others in the group.
Nick, does that board have a St microelectronics processor? If so, maybe we can silverize this one!
It either doesn't have print on it, or I can't read it even with a magnifying glass.
Great review again. what means the 120 on your Hand??
lol. I wondered if that would come up. Nothing exciting. I took my kids to an indoor play place. They stamp the kids and the parent with the same number to ensure the kids don't leave with anyone they shouldn't. It used to be invisible but now not so much and it doesn't wash off well either.
Nick Burns good Idea of them. Great that you announced the q85. So excited to watch your build video. Can you please also add a extra couple of minutes to review a few lipos? wish you nice Christmas Time n holidays
Yea the Q85 has been a long time coming. I made a classic mistake and only ordered 4 ESC on my first batch. And sure enough had a bad one. Then they went on backorder...for 4 weeks then 3 weeks to get to me. I have been flying it and tuning. Its fun. I can add some subjective thoughts on my 2S batteries. I have a big batch of mixed batteries coming from mylipo.de also.
Nick Burns oh yes i read the issue you wrote it in RCGroups. I burned my first piko. solderpads just so tiny. Got a new and after xmas i'll start a next try.
Burning stuff up hurts the heart, all the excitement builds then up in smoke. A killer crash isn't as bad as smoke before flight.FlexRC pico x will be next build when the motors show up, I see its now called the Pico Owl and then V2, I have V1. I now have heaps of 6A RS ESCs. Pico X will have the ESCs from his webshop.
so .. can you give some feedback about the fpv experience ? punchy vs weak, yaw rate, max tilt rate, anything else we can't get from the video?
I think its more punchy than stock E010, even close to the upgraded motors I am using on my custom e010. I think the yaw rate is more aggressive than pitch and roll, it doesn't feel like they match up very well. So far I haven't had any durability issues with the frame either.
Are there any better batteries for the stock connector? Or do you think it's fine with the stock battery?
And does that multi-port charger you linked work with these batteries?
Even with the added weight of the cam/vtx I think its good. I think the only thing we can get from alternate batteries would be longer flight time, but that will like come at a cost to agility.
And yes the charger does work with these batteries.
Awesome, thanks for the info!
pull the wire out the top of the remote an you can fly down there it gives it way more range
Good reviews!
Thank you
What battery connecters does it use? Im new to all of this.
It is often called UMX or mCPX
Hey nick! Could you please post a link to the usb charger with multiple plugs for this f36?
bit.ly/SKYRCCharger
what about the camera connector? what's it called and where did you get it from? THanks
The best goggles in the quality and range, up to $200 ?
Do you think this is the best option if all you want is a cheap whoop with long flight times?
Probably in this category. As for long flight times, there will be a limit to weight of battery and max thrust available, where a bigger battery won't yield much additional flight time.
Nick Burns Yeah I remember someone tested a bunch on one of the clones and 220mah 15c was the sweet spot (with 2-blade props)
Furibee seems a little different from the other clones though. Are there different battery sizes available?
And have you tested the JJRC H36?
I have not tried out the H36, I think the limit to battery would be 220mah without modification.
Do you know which protocol it is? Just ordered one, and a multi module fo the devo.
I don't know. I don't have the equipment to do a packet capture. Keep your eye on the deviationtx.com forums.
There isnt a (y) connector to put between the battery connection to go to the camera ? So you wouldn't have to solder ?
correct, we have to heat up the iron to connect a camera.
Have you used the stock furibee f36 and battery?
Can't be sure at this time. The video was published a year ago, my memory is much to give an accurate answer.
Is the battery having the same connector as the Eachine E010? Are they interchangeable?
yes and yes.
Can I put my camera from my mini Orion, which is a much bigger quad, on this f36??
It will depend on the weight of the camera. I would say if its much over 5grams I wouldn't. These little quads are very sensitive to adding weight.
Hey I wanna try to make one too:) any tips?
Where do i get the connector for the camara? and what goggles would you recommand? Im really poor so cheap once if possible:D
You don't have to use a connector, I do sometimes because I plan to move the camera to another quad. Otherwise I would just solder the camera wires directly to the backside of the battery connector. The hobbyking cyclops goggles are good and cheap, but shipping might get ya, other wise the furibee vr-01 from gearbest.
Ok and thanks for replying. I would like a connector aswell i think because then i can try it on other quards. How can i find them?
Would it be a "big/too hard Project" for a noob to maybe add some bigger motors for some more speed/fun or something like that?:)
I get the connectors from ebay. I think they are jst-ph 1.25 2 wire, but check around and match the picture to what you need. Putting bigger motors on will require some risky modding as the motor mounts would need to be cut out and new ones fashioned. The furibee has pretty good motors, but a slide in upgrade might be the readymaderc strix motors or spintechs or micro-motor-warehouse motors.
Ok thank you very much:)
you should have a lot more subs cool dude
Thank you.
Great price here - it's for 10.99 USD
couponsgearbest.com/2017/03/07/furibee-f36-rc-quadcopter-active-coupon-price-gearbest/
I hope it will be useful
ruclips.net/video/i5P4L2T8IMg/видео.html
I've had my Furibee 36 for about three weeks...fly it no more than 5-10 minutes per day. What might have caused to motors to fail?
Thanks.
crashes, fibers around the motor stems, top impact.
Probably all three then. LOL
Luckily I have a second one...I'm better at it now!
do you know if the battery plug type is the same as the walkera 1S batteries for genius cp?
Sorry. I don't know. What is the name of the connector for the genius cp?
Has anyone noticed how long the antenna is in the controller. On mine it's about 77mm. My understanding is that the antenna should be about 32mm for the 2.4 frequency. Do you think that modifying the antenna would add range?
I didn't notice this on my, unfortunately I gave it away and now can't check.
Hi, one of the motors stop spinning. Must i change to a new motor or there is something can be done to make it spin? Thanks.
If the wires are still well connected, we will need to change our the motors. I would expect to need to change all 4 unless you are able to replace the bad motor with an exact replacement.
Nick Burns thanks a lot!
Hi, i need some guidance. I received mine today. After few flights, one propeller's motor did not turn off. It keeps on moving. Only when i took out the battery then it stops. Any idea how i fix this problem?
Sounds like a blown fet on the board. We would either need to find a replacement and solder it on...hard. Or replace the board.
did u upgrade the motors?
No, these are stock.
Charles Lee im sure the f36 stock is better than the e010 stock
Can you actually put the E010 canopy on the F36??
yea, most of these are all the same dimensions.
One more question can you put 6mm motors on the FC of the E011??
The flight controller doesn't care about the size of the motors attached. The motors need to fit the frame.
Like #185 subbed buddy 👊👍 Great work I love it 😊 love the f36
Do you know a good newb drone for under 10 euro? because of this one is not for a newb?
whats nicks superpower? nick burns
lol, oh my. That's a first.
what protocol is it running on?
don't know. We would need the deviationtx team to sort that out.
is this faster than the Blade Inductrix?
I believe so. These motors are pretty good.
why are you comparing it to an E010 instead of an inductrix?
hugh It is more alike to the E010.
yes, Aeroscrew is correct.
Think because the E010 is in the same price range. Inductrix is more of an overpriced piece of junk ;)
Arcee Moron The inductrix binds to a a spektrum transmitter (or a taranis with a module) and has way better parts support, so I think it's worth it.
But hey, you do you
the furibee board sux for fpv. the yaw is fast and delayed. i used the furibee motor and frame but a eachine e010 board and rakonheli triblade. best cheap set up 🖒
yaw is to fast on this board. Those motors are nice.
Or make one ?
RUclips suggested that I watch this after your Mobeetle stick cam video. Of course your getting a 5 years too late like on this.
lol, that is way back in the archives. RUclips couldn't suggest something a bit more recent? smh. :)
Imma whoop this one too!
Mine won't arm the drone and controller start beeping but it won't arm
with the stock controller, move the left stick all the way to the top then back down.
I do that but it doesn't take off
do the lights go solid?
No
No
ony of my motors is slower as the others that sucks
yes, one damaged or bad motor will slow the rest down. Maybe time for a new set.
i am waiting for my ordered eachine 013 fpv. If the motors are comtatible to each drones maybe its a good idea to order a whole bunch of motors?
:-D