I'm surprised the stock Furibee could lift the camera so well! This is my budget whoop recipe; E010 props cut down to biblades. E010 frame E010 board Boldclash 18000kv motors (speed like the Rambo whoop, a little more efficient) Boldclash F01 camera (CM275T with whip antenna) Stock E010 lipos, I'm trying out Nemo Juice lipos right now, great performance. Remember to poke the board and VTX antennas up to get the best range. I have a cheap multi protocol module from Banggood in my Taranis. Flying with the stock board bound to Taranis is far better than flying with the stock transmitter. Happy whooping!
i have a tray full of micro quads mostly h8, a few modded, an h36 with wifi cam junk for the hell of it, a few F36's one whooped with cm275T, H31 with fpv setup, an xk x 251 also setup ready for TX-03 and im building a furibee wasp 2s. Will FRSKY Taranis fly them? what about the Flysky for $260 less ? help please guys
Brotha i got recomend the Newbeedrone fc for that thing. acro mode good, and with a little practice, flips are super fun inside. You could of did a power loop through your bros roller coster man!!. Im glad u liked flying it, hope u can do more vids with em.
post a linkto the fc man im about to try the F3 and beta flight. powerloops heaven i hope, but man his bros coaster was probably a bit tight without a runup lol
The F36 does have better stock motors than the e010. I would recommend buying the crazypony foam battery holder and using a whoop style battery as you could put a 250mah with just a little more weight. Also crazypony any banggood have little camera's with a dipole whip antenna that are like 3.5 grams.
Thanks for this video, I had one with a camera mounted low profile, Another with out. Both boards died already. Have you taken a look at this board closely It has a lot of different soldering options. What are they all, can this board have a hobby Grade receiver installed to it? Let me what you think 😎
Nice flying! I put a LS S2 aio cam on mine. Outstanding video quality, ill do a review soon. Do you have any signal issues flying outdoors? Mine twitches and glitches outside , with no cam connected its fine. I did the antenna extension mod too.
Hi another great review, but how do you get to save the video so you can show us on youtube, as there is no sd card on the camera, is there a sd card on the head unit that you were using, sorry if I sound dumb, but I don't know how you get to watch what you were filming after you have had the flight? hope this makes some sense what I'm asking? cheers Nige
You need some kind of DVR (digital video recorder). Some goggles have them built in, I added my own to my goggles. You can also get a separate screen with one built in if you want to record video on quads that can't carry and HD cam.
looks nice, gonna whoop mine to see if i'll enjoy this one stock. Ihave one order. Today i received a notification that something is waiting for me at the post office. I have several other things on order, but hope its the furibee.
Canino I was impressed it could carry the fx797t camera even without decasing. Imagine how much better it would do with a deceased fx797t, a TX01 or even better the boldclash f-01 which are 1-3g lighter. Hope you got the Furibee today so you can whoop it up. I am still waiting for the f-01 camera.
i think i am gonna make a low profile whoop with the vtx01 and separate cam. it should be a bit heavier than the boldclash, but the weight would be better distributed plus more streamlined. I ordered some boldclash motors to retry the e010.
How your F36 propeller ducts are keeping up? On H36 after whooping it I managed to break propeller duct from inside already on 2 frames :( Now I'd ordered F36 from GearBest but seeing photos that it have virtually the same frame that H36, I'm a bit concerned about the frame strength.
You can pull the round ends off the tx. and put M3 nylon hex stand offs in their place. I did this on my E010 and it works great. You might have to round the hole out with a #37 drill bit by hand and then it slides tightly over. I also stuck my antenna wire out of the front and it helps a little. I also removed the VTX case to save weight👍
hi great video Subed you 👍 can i ask where the little camera was from? and is it possible to get rid of the vibration on the camera with mounting on foam or something? thanks steve 👍
Thanks :D It was from the CX117 kit I am working on reviewing, but you can buy it separate. www.gearbest.com/fpv-system/pp_396728.html I am sure you could yes, but I didn't really notice any vibrations besides the first 20 seconds of a flight when the battery was full .
The RCAddict thank you so much I've been looking all day at making a fpv mini qwad cheap and you've done it 👍👍😆 great job 👍👍 now I just need a TX lol! as I'm a little older than yourself and will struggle with the dinky little tx that the f36 comes with, my hands arnt as forgiving as they used to be lol! thanks 👍👍
The RCAddict thank you so much I've been looking all day at making a fpv mini qwad cheap and you've done it 👍👍😆 great job 👍👍 now I just need a TX lol! as I'm a little older than yourself and will struggle with the dinky little tx that the f36 comes with, my hands arnt as forgiving as they used to be lol! thanks 👍
Hi @rcaddict I am going to buy the furibee f36, but I want to modify a camera on it. can you please tell me what exactly I can buy to modify the camera on it ? thank you
hey! please respond to this comment? i wanna build a fpv racer with a f36 board, a kingkong q100 frame and 8.5mm motor's but do you know if the board will handle 8.5mm motors? thank you
I don't have one but am thinking about it. The stock motors are 6mm x 15mm, aren't they? So going to a 8.5mm motor would require a different frame I would think?
I've put an Eachine TX03 on me F36. (last two vidz on my channel). All appair ok. But today starting to fly it I had a bad result. When I give power to go up the image start to go striped, and then disappear! Just 'snow'. It fly well, images are okay at zero throttle.Can someone please help? THANX!
I've took out the TX03 and I've put on the EF-01 (without the metal box) and it works. I'm balancing it right now. It fly a bit less well but the image does not disappear anymore. And now it has 800TVL! ☺ (thanx for the replay)
This is a place to start haha. Basically a micro fpv quad, the name create from team big whoop when they first did it with their inductrix. www.tinywhoop.com/
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
Good review and fun flight around your house. Kudos.
my jjrc is retired. now Furibee fpv time Yaaaaa 😊. Eachine tx 01 camera from banggood is awesome and just 5 grams so great for indoor fpv flights
Nice :)
I'm surprised the stock Furibee could lift the camera so well!
This is my budget whoop recipe;
E010 props cut down to biblades.
E010 frame
E010 board
Boldclash 18000kv motors (speed like the Rambo whoop, a little more efficient)
Boldclash F01 camera (CM275T with whip antenna)
Stock E010 lipos, I'm trying out Nemo Juice lipos right now, great performance.
Remember to poke the board and VTX antennas up to get the best range.
I have a cheap multi protocol module from Banggood in my Taranis. Flying with the stock board bound to Taranis is far better than flying with the stock transmitter.
Happy whooping!
Awesome! I have some other micro FPV quads here to try out tomorrow. Both will bind to my Taranis.
i have a tray full of micro quads mostly h8, a few modded, an h36 with wifi cam junk for the hell of it, a few F36's one whooped with cm275T, H31 with fpv setup, an xk x 251 also setup ready for TX-03 and im building a furibee wasp 2s. Will FRSKY Taranis fly them? what about the Flysky for $260 less ? help please guys
Nope, none of those are on he frsky protocol, or flysky. Flysky is not $260 less btw, flysky sucks haha
What protocol is this FuriBee F36?
It’s like a mini adventure. Got to boost that battery though
nice tour!
=D
Skillful pilot
Brotha i got recomend the Newbeedrone fc for that thing. acro mode good, and with a little practice, flips are super fun inside. You could of did a power loop through your bros roller coster man!!. Im glad u liked flying it, hope u can do more vids with em.
Cool, sure an actual FC like that would be cool, but still flew great stock!
post a linkto the fc man im about to try the F3 and beta flight. powerloops heaven i hope, but man his bros coaster was probably a bit tight without a runup lol
The F36 does have better stock motors than the e010. I would recommend buying the crazypony foam battery holder and using a whoop style battery as you could put a 250mah with just a little more weight. Also crazypony any banggood have little camera's with a dipole whip antenna that are like 3.5 grams.
Yeah, this was just proof of concept :)
Furibee F36 nice!!
:)
Cool video , would have loved to see the cat claw it out of flight ! Nice little FPV tour : Thumbs up :)
Haha, she's too lazy
Haha, she's too lazy
Haha, she's too lazy
Thanks for this video, I had one with a camera mounted low profile,
Another with out. Both boards died already. Have you taken a look at this board closely
It has a lot of different soldering options. What are they all, can this board have a hobby
Grade receiver installed to it? Let me what you think 😎
I am pretty sure there is no way too, and if there is you would have to be VERY knowledgeable of the tech inside these cheap boards and programming.
Hi, i loved the camera and everything. I will buy 1 quad F36 now, but i would like to know how do you see the video while flying?
FPV Goggles
Iv,e got three of these coming ,definately gonna do this fpv mod to one of them.
Nice :D
Nice flying! I put a LS S2 aio cam on mine. Outstanding video quality, ill do a review soon. Do you have any signal issues flying outdoors? Mine twitches and glitches outside , with no cam connected its fine. I did the antenna extension mod too.
How far away are you? It will only go like 50m
With cam, 20m. Without, 60-80m
Imma turn mine into a whoop as well! nice vid.
Awesome, hope you like it =D
Hi another great review, but how do you get to save the video so you can show us on youtube, as there is no sd card on the camera, is there a sd card on the head unit that you were using, sorry if I sound dumb, but I don't know how you get to watch what you were filming after you have had the flight? hope this makes some sense what I'm asking? cheers Nige
You need some kind of DVR (digital video recorder). Some goggles have them built in, I added my own to my goggles. You can also get a separate screen with one built in if you want to record video on quads that can't carry and HD cam.
Since F36 is a bit more powerful than the E010, would putting on a 400mAh battery be a good idea for extending FPV flight time?
You'd probably be adding enough weight that it would equal out
In one of your recent videos, I remember you saying you purchased a 3D printer from banggood. Just wondering how it's working out.
I bought the Anet A8 from Gearbest. If you have the knowledge how to run and fix it it works perfectly.
looks nice, gonna whoop mine to see if i'll enjoy this one stock. Ihave one order. Today i received a notification that something is waiting for me at the post office. I have several other things on order, but hope its the furibee.
Canino I was impressed it could carry the fx797t camera even without decasing. Imagine how much better it would do with a deceased fx797t, a TX01 or even better the boldclash f-01 which are 1-3g lighter.
Hope you got the Furibee today so you can whoop it up. I am still waiting for the f-01 camera.
i think i am gonna make a low profile whoop with the vtx01 and separate cam. it should be a bit heavier than the boldclash, but the weight would be better distributed plus more streamlined. I ordered some boldclash motors to retry the e010.
Yeah, could be done lighter, but this still had plenty of power :)
U got a new subscriber bro
cool vid man... ! are you using the little stock TX ?
Yep :)
Wow! Could you please tell me what kind of camera did you attached to the drone?
Link in description
Perfect ! What video receiver you use ?
This was Boscam FR632
How your F36 propeller ducts are keeping up? On H36 after whooping it I managed to break propeller duct from inside already on 2 frames :( Now I'd ordered F36 from GearBest but seeing photos that it have virtually the same frame that H36, I'm a bit concerned about the frame strength.
I never damaged anything in any of my crashes. Anything will break with the right crash though.
nice vid friend!Can you record the video or just watch it live?
If you have a dvr yes (which is how I show it in the video)
How the heck do you turn? I just get how to go forward, backwards, sideways.
You can pull the round ends off the tx. and put M3 nylon hex stand offs in their place. I did this on my E010 and it works great. You might have to round the hole out with a #37 drill bit by hand and then it slides tightly over. I also stuck my antenna wire out of the front and it helps a little. I also removed the VTX case to save weight👍
:)
You are so good! I love your videos! When i grow up i wanna be good like you. I'm 39...:)
Haha, thanks ;)
Im 46 and I am still laughing as I type :-)
that was kool bro nice vid
Are your quannum v2 gets foggy some time? I can't get rid of the wet glass in Hot days or even at home now
Nope, never had a problem with the plastic fogging up.
first channel I subscribed to when they asked
Thanks for the support Big Joe!
hi
great video Subed you 👍
can i ask where the little camera was from?
and is it possible to get rid of the vibration on the camera with mounting on foam or something?
thanks steve 👍
Thanks :D It was from the CX117 kit I am working on reviewing, but you can buy it separate. www.gearbest.com/fpv-system/pp_396728.html
I am sure you could yes, but I didn't really notice any vibrations besides the first 20 seconds of a flight when the battery was full .
The RCAddict
thank you very much 👍and what goggles will this reciever work with?
thanks again 👍
BAJAFLATOUT!! Any goggle that can receive the same channels, so bascially any goggle haha
The RCAddict thank you so much
I've been looking all day at making a fpv mini qwad cheap and you've done it 👍👍😆 great job 👍👍 now I just need a TX lol! as I'm a little older than yourself and will struggle with the dinky little tx that the f36 comes with, my hands arnt as forgiving as they used to be lol!
thanks 👍👍
The RCAddict thank you so much
I've been looking all day at making a fpv mini qwad cheap and you've done it 👍👍😆 great job 👍👍 now I just need a TX lol! as I'm a little older than yourself and will struggle with the dinky little tx that the f36 comes with, my hands arnt as forgiving as they used to be lol!
thanks 👍
I am de police pilot that hasnt got an fpv in my life will it whoop yess like the sound of the police
whoop whoop!
Hi @rcaddict I am going to buy the furibee f36, but I want to modify a camera on it. can you please tell me what exactly I can buy to modify the camera on it ? thank you
It does not come with a camera. You need to add your own VTX camera bundle to be able to fly fpv.
hey! please respond to this comment?
i wanna build a fpv racer with a f36 board, a kingkong q100 frame and 8.5mm motor's
but do you know if the board will handle 8.5mm motors? thank you
No idea if it could take the current :/ I imagine going from 6 to 8.5 would be too much. Maybe the upgraded F3 version can though.
I don't have one but am thinking about it. The stock motors are 6mm x 15mm, aren't they? So going to a 8.5mm motor would require a different frame I would think?
yes i different frame is needed, i'am going to do a build with f36 board, 7mm motor's and a 90mm frame
Do you use any special battieries?
nope
What receiver are you using on your quanum v2 s I'm getting terrible range
Boscam FR632. Could be the VTX?
The RCAddict nah I'm pretty sure it's the receiver because my tinywhoop also has terrible range
Mystic_Monster7 OK, What antennas are you using on both ends?
The RCAddict two genuine tbs triumphs
The RCAddict and the receiver is about a year old. It's a rc58-32ch
Where can i get that small fpv camera ?
Link in description
I've put an Eachine TX03 on me F36. (last two vidz on my channel). All appair ok. But today starting to fly it I had a bad result. When I give power to go up the image start to go striped, and then disappear! Just 'snow'. It fly well, images are okay at zero throttle.Can someone please help? THANX!
You are getting a lot of noise from the motors. You need to filter the video somehow, either with a regulator or LC filter.
I've took out the TX03 and I've put on the EF-01 (without the metal box) and it works. I'm balancing it right now. It fly a bit less well but the image does not disappear anymore.
And now it has 800TVL! ☺
(thanx for the replay)
hey ..have u did a video on your headset thanku tiny whoop
It is quanum V2 with the FR632 receiver.
From how far can we controll it?plz respond
& can i fit the cam under it??
You will probably get about 30m out of it. You could, but there is no point.
Would u be willing to build another one like this and sell it?
Sorry but I wouldn't. It is only 2 solder points though.
The RCAddict Ty I just seen that kinda simple.
What does whoop mean?
This is a place to start haha. Basically a micro fpv quad, the name create from team big whoop when they first did it with their inductrix. www.tinywhoop.com/
Kkkkkkl gato
How is this drone so cheap??!
China man....... China.
The RCAddict hey. I'm Chinese. But yeah true
YaMaster FPV I just mean China is capable of producing things at super low costs.
The RCAddict yeah i know. No hard feelings. Its really true. I mean like to some extent things end up becoming really low quality.
Well no offense taken. Don't wanna send the wrong message. (
Love the videos but ya gotta quit biting those nails son. Yikes!
Trying :/