Very helpful. I recent bought the 30 degree nailer used like new. It has 3” nails but it’s only driving them 1” in. If the battery is low will that effect the power behind the driver piston? I tried charging the battery but the light blinks red. Charged it for 1 hour put battery back in and when you press the battery button the led light is red.
@@Allenr1967 it’s used but great condition no scratches or dings. But nails only drive 1”. Original owner said he used it to build a small deck. And it’s been in storage for over a year.
@@ESPNEWS8 definitely needs air refill. If you can do without it for a week or so. Go to the link below and request a free FedEx shipping label to send to the factory service center for evaluation and repair. Just don't mention you received the tool second hand. Warranty is normally to first purchaser only. The FSC will use the serial number manufacturer date code to warranty it if possible. www.metabohptfactoryservice.com/
Hey man. I have an issue that my Hitachi 18v nail gun doesn't feed my nails properly. It will be fine for half a strip then it will misfire. If I put pressure on the mechanism it will fire fine. I've tried replacing the spring with no change. I've cleaned and cleared the front but the problem persists. Do you have any suggestions?
Take the magazine off and see how restricted nails are to pass through the magazine. The plate they ride on may have bowed out or the plastic magazine may have deformed.
The driver blade does not fully retract up into the AirSpring nailers like standard pneumatic nailers. The tip can always be seen when the jam door is opened.
Straight to the point and exactly what I was looking for! A+!
Thank you! Im new to using a nail gun of any kind ( career change ) and I’ve been having trouble removing misfires lol
Pneumatic nailers are different to clear a jam.
Wow thank you
is the 18g brad nailer the same psi to fill i have just ordered the pressure reducing valve for the 1850 nailer
Very helpful. I recent bought the 30 degree nailer used like new. It has 3” nails but it’s only driving them 1” in. If the battery is low will that effect the power behind the driver piston? I tried charging the battery but the light blinks red. Charged it for 1 hour put battery back in and when you press the battery button the led light is red.
Not sinking the fasteners on a new unit is a sign of factory defect (leak). Return it for a replacement.
The battery does have to be fully charged before first use for best results.
@@Allenr1967 it’s used but great condition no scratches or dings. But nails only drive 1”. Original owner said he used it to build a small deck. And it’s been in storage for over a year.
@@ESPNEWS8 definitely needs air refill. If you can do without it for a week or so. Go to the link below and request a free FedEx shipping label to send to the factory service center for evaluation and repair. Just don't mention you received the tool second hand. Warranty is normally to first purchaser only. The FSC will use the serial number manufacturer date code to warranty it if possible.
www.metabohptfactoryservice.com/
Hey man.
I have an issue that my Hitachi 18v nail gun doesn't feed my nails properly. It will be fine for half a strip then it will misfire. If I put pressure on the mechanism it will fire fine. I've tried replacing the spring with no change. I've cleaned and cleared the front but the problem persists. Do you have any suggestions?
Take the magazine off and see how restricted nails are to pass through the magazine. The plate they ride on may have bowed out or the plastic magazine may have deformed.
How do you get mag off if the 4H bolt is striped i used a drill and its striped super quick
Can try heating it and grad it with visegrip
Thanks man
The drive blade on my Metabo finish nailer has jammed in a position where it is not fully retracted. What should I do?
The driver blade does not fully retract up into the AirSpring nailers like standard pneumatic nailers. The tip can always be seen when the jam door is opened.
If it is not working or it is displaying the orange error lights. It can be sent in for inspection.
I had a pice fall out the Gun when it jammed up wanted to see if you could help me with figuring out where it goes
An extra small white thread spool?
What bolt extractor size did you use?
Two 4mm in the front and one in the rear of the magazine.
4mm hex drive
This happens way to often and is such a hassle. especially when you are in 100 degree plus weather and sweating your butt off.
The full head version is most more reliable than the clipped head.