How to Clean Shark Anti Hair Wrap Cordless Vacuum Cleaner IZ251UK
HTML-код
- Опубликовано: 5 ноя 2020
- Hi Guys and today I have for you is the #shark #cordless IZ251UK is the new cordless #vacuum cleaner from Shark, Shark Anti Hair Wrap Cordless Stick Vacuum Cleaner with Flexology [Twin Battery] IZ251UK, In this video I show you how to clean it, and show you how to remove the filter, clean and remove the roller head
Please remember to Subscribe to my channel it’s free
Check out my Facebook link : / crazybakerun. .
Filmed on Canon XA50 testing out
Which? Cordless Vacuum Cleaner April 2020
Bring ease to your cleaning routine with this flexible, twin battery cordless stick vacuum cleaner from Shark. Glide between carpets and hard floors with the twin tech floorhead, combining Shark’s signature DuoClean two brush-roll design with Anti Hair Wrap Technology, actively removing hair from the bristle brush-roll as you clean.
Up to 80 minutes of run-time*
WithTwin battery model. Charge the removable Lithium Ion battery packs on or off the vacuum, wherever suits you, or charge both batteries at once in the dual charging cradle.
DuoClean Technology
Glide from carpets to hard floors without stopping. Two brush-rolls work together in one floorhead - a bristle brush cleans deep into carpet pile, while a soft front brush-roll actively draws in large debris, small particles and lifts fine dust from hard floors.
Anti Hair Wrap Technology
Shark’s unique bristle-guard and comb actively separate and remove hair from the bristle brush-roll as you clean, helping to leave it tangle-free.
Flexology
Reach, charge and store anywhere. The flexible wand bends so you don’t have to, easily cleaning underneath furniture and folding down for compact, freestanding storage.
Transform into a handheld vacuum
At the touch of a button, go handheld to easily clean stairs, soft furnishings and surfaces with the handy included attachments. Simply attach the wand in handheld mode to reach up high.
Anti-Allergen Complete Seal
Anti-Allergen Complete Seal captures and traps 99.9%** of dust and allergens inside the vacuum, not releasing them back into the air you breathe.
Easy to Use
Easily move around corners and furniture with swivel steering and a slim stick silhouette. Signature LED lights illuminate hidden dust underneath furniture. 
Хобби
Thanks for your instructions. I was about ready to throw this vacuum out since it no longer was picking up anything but was able to finally clean it and it is working again.
T thank you, I was just about to take my shark to be sorted but have done it myself with your easy to follow instructions. Brilliant!
Your welcome 😀
Thank you very much for this! Really helped for my first bit of maintenance.
Thank you 😀 just did a #shorts video Noisey Shark, what it is the pipe at the bottom next to the head can get blocked with hairs or carpet bits when it runs it sounds like a helicopter taking off, it's a bit of a bottle neck because of the corrgate pipe inside, took 20 minutes to clear with a wooden stick 😀 laters Steve
I just wanted to say that I fixed my shark as a result of your video. Thanks again.
Thank you it's nice to hear 😊 laters Steve
I just completed a maintenance clean on my shark and thank you so much for your directions.
Your welcome 😀
Very helpful thank you! I shall use this video as a reference for cleaning my new shark :)
Thank you 😀👍
Very helpful, could not figure out how to access the filters. Thank you very much. Have saved this for reference later.
Your welcome mate 👍 😀
Thanks so much, I’ve been hurting my back only using the handhold part as I couldn’t work out how to open the bottom part. I found a huge blockage and now my hoover is working again 🙏🏽
I found also if you got an older vacuum cleaner with a lot of power, use this to clean out, especially getting carpet out of the pipes laters Steve 😀
Wife just hoovered up a birthday cake. Entire thing is full of cake now. Wish me luck.
Congratulations 🎊 👏 💐 Happy Easter 🐰
Thank you for sharing this video. I found it so helpful as I’m a new owner and didn’t know what to do when my front roller popped. Now it’s been cleaned AND repaired 😊.
Thank you 😀 laters
I cannot believe the stuff that was clogging up my soft roller. Thank you for your helpful video.
Dude! You are amazing! Thank you for making my life sooooo much easier! :D
Thanks mate 👍 love the Hot 🔥 Wheels laters
Thankyou for your step by step cleaning lovely and helpful and easy to follow and I now have a clean hoover xx
I am happy I can be helpful ☺️
Ive seen a lot of videos on how to clean these hovers yours is the BEST, Thanks
Thanks mate 👍 your welcome 😀
Thank you for sharing this has taken the stress out of cleaning my shark.
Thank you 😊
Thank you, this really helped me to unblock and repair my Shark - great advice, and thank you so much for step by step easy instructions - has saved me needing to take it to a repair company - really appreciate this video
your welcome 😀 I would have expected Shark to add into the box How to clean 😀 How to unblock 😀 Happy Christmas Laters Steve x
Thank you so much for this Crazy Baker. I have just purchased my shark after i had wasted money on two other vacuums that simply stopped working after 6 months, they were a false economy . I have subscribed and will use your advice as needed.
Your welcome mate 👍 😀 laters Steve
Fantastic video! Thanks so much. Mine was full of dog hair, so glad I got it cleaned up. Thanks again!
It's hard to believe so many different people with pets have had problems 😀 your welcome laters Steve
The panel removal for the anti hair wrap roller, 2 Pence coin is what you need fits perfectly.
I remember 2 pence coins 🤣 years ago, can you still get them now 🤣 Cards don't work the same 😀
Excellent video
This really helped me out !
I was going to chuck my shark away! Now I managed to clean it out and it is working again
Your welcome 😀
Great video! Thank you!! Just what I needed and hoover all clean ! :)
That's the one 😀
Thanks so much for this helpful video ! You helped me fix our hoover!
I am glad I could be of help 😀 it’s makes my day laters Steve
Same here. Thanks a lot.
@@thomasaelbrecht thank you 👍
Brilliant video, gonna clean my shark tomorrow!
Thanks you 😀
thank you so much for your informative video, great help for a lazy, non tech person like me x
Your welcome 🙂
Really good video. Very straightforward 😊
Thank you 👍
You’ve just saved me a repair/replacement bill on my less than 2 year old Shark! #hero 🙌🏼🙌🏼 thank you 😊😊
Thank you so much, I am happy I can help 😀 laters Steve
Thanks so much
How long do I need to dry the filters and orange turn thing for
Thanks a lot. Youre a real life saver!
Your welcome mate 👍
Thanks for your video, so much easier to understand than the instructions x
Thank you 😊 your welcome
Thank you for the video. Very helpful. Just cleaned out shark and the amount of hair wedged under the front roller was an embarrassment!
Mate I know what you mean 😉 not sure how people think the dog hair don't get stuck round the roller 😉 🙄 😜
Great. Thank you 😊
Thanks for this vid. Off to clean my Shark now 😉
your welcome 🙂
Thank you for uploading. This was def helpful
Your welcome 😀
This is very useful. Thank you very much!
Your welcome 😀 laters Steve 😋
The biggest issues are the small wheels get tangled with hair and almost impossible to remove. Also, the rubber roller does that remove at all.AND this is where the majority of hair and debris get stuck. Have to do microsurgery with various items to even attempt to remove the crap. If you LOVE vacuuming, cleaning vacuums, and spending more time doing maintenance then actually cleaning, THIS UNIT IS FOR YOU!
Mine is just the same, I only clean out when it stops working 😀
The small wheels come off quickly so you can clean all the hair tangled in it. I found it out recently after using it for 2 years.
@nishantkhanorkar898 thanks mate 👍 👌 you reminded me of the other problems, on my other yt channel I have covered most of the problems 😀 laters Steve
@@nishantkhanorkar898 But like how?
i used fishing line pushed through with a tooth flosser @@danielschneider4871
I need a big help what’s the think called under the vacuum above the orange brush
Thanks for this, have just cleaned my very dirty Shark!!!
Funny thing is I have just finished mine again today 😀
helpful video! Shark should pay you for this
If only 😀
Great video mine doesn’t suck think the blockage must be in the main part which I couldn’t open now another try .thanks
Your welcome 🙂
Great video - I've found that a 20p coin fits the screws perfectly.
Dig deep 👌 thanks, mate 👍
The thing is, how do I clean the clear top? The big brush is in the way and you have to screw it into pieces to get it out
Yep, me too, this is what I came here for... But no answer in that yet
I get a antibac wipe and roll it through the hair wrap section and few times. Let it dry after wards before use
@@vickiwilliamson9687 I'll have to try this - thanks! :)
@@ukdanweb same here
@@vickiwilliamson9687It worked. Thanks.
The hole near the anti hair wrap rotor of my vacuum cleaner was CLOGGED full of rubbish! And I was wondering why it wasn't working :'D
Thank you for this fantastic video!!
You are so welcome. This has been a nightmare since I bought it 🙂 just as well I kept my real vacuum cleaner to clean the Shark 😂🤣😅
Hi! So helpful to see you can clean it. Mine has so much dust build up and some was plaster dust (thanks to builders using it!). I can't seem to get the inside foam bit off without it ripping (it's in the lid that you flip up)? Any tips? I can see there's some debris collected beneath it...
Is this the foam under the filter ?
never let your builders use the shark! :) Give them a Henry. Its almost indestructable. Use bagless for the first clean.
Very helpful thanks.
Your welcome 😀
Thanks for the Vid just did mine.
Your welcome 😀
brilliant thank you so much, really really helpful :)
your welcome
I used Japonesque tweezers and they worked just use the wedge not the tip.but i recommend screwdriver if you have one as i only needed to remove something and not the brushroll itself.
Thanks a lot this is really helpful. Can we wash the plastic part? There’s some dust stuck inside that can’t be brushed off
Mine is the same, yes I wash all of it, and I us a bottle brush for all the smaller areas, it's the only way 😀 laters Steve 😀
Very well explained.❤
Thank you so much 💓
Thank you 🙏🏽💕
Your welcome 😀
Great help thanks, btw true about the hair gets on the rollers, sometimes have to use scissors. and the cone shaped thingy in the dustbin needs to be cleaned. otherwise you will get a flashing red 'battery' signal and the cleaner will power off. thnx
On mine I don't have a red light, but you can hear the noise from the motor itself, it's like a helicopter taking off 😀 it's nice to hear from other people who are having problems 😀 laters Steve 👍
Good walkthrough. You could clean it faster with an air compressor or compressed air. Or switch brushed to one with bristles all around it.
Mate I was thinking about that, I was almost ready to go out to my garage, and then thinking about it most don't have air in the garage laters
@@crazybaker1 No but they have compressed air cans, and those like me have an electric computer duster. It is essentially a leaf blower but the size of a a tea pot lol. I use it for blowing out electronics, drying up liquids, all sorts of things.
@@JTBivens sounds cool 😀
Great video thank you
Thanks mate 👍
Good video well explained thanks..
Thank you so much 😀
Thanks that was a great help
Your welcome 😀
Thanks you're a godsend
Your welcome 😀
Thanks it was really helpful 😊
Your welcome 😀
@5:54 just under the palm of your right had there is a small photo on the appliance that shows you need to cut along the roller to basically unwrap any hair wrapped around it and the hair comes off easily. It does say to do this in the instructions too. In a house with three long haired women this technology has worked perfectly and there is never any left over hair that I can't get off
Are you using the same Shark or are you using the one with a plug ? In my latest video I show hairs blocking it up, Shark has written to me and said would I like a free upgrade because they have had a number of complaints about this model 😀 so they no all about the product, so basely I am going to take up there offer 😀
@@crazybaker1 yes I am using the same cordless shark model. I have just seen your latest video and the reason the pipe is getting blocked is because you are trying to hoover up pieces of rubbish that are already too big to fit through the pipe (the piece of cardboard that came out of your pipe) sorry but basic cleaning knowledge will tell you to pick up pieces like this and throw them in the bin and not ruin the life of your hoover with them. I think you might prefer a more industrial type hoover than the basic household models
@@cmac3971 as Shark has made its clear some of this model has got a recall, from the letter from Shark some model are ok, they have a list of defected models and year, it seems to be the one I have 😀 if you have got a Shark that works great for you 😀 happy days, you always have plenty of people that are not happy and it's the seems with happy buyers, no one really cares about it until the Shark stops working 😀
@@crazybaker1 the anti hair wrap on the ICZ160UKT is working really well for me, so I think you are right that it's an issue with the one you had. thank you for the video :)
@@hashimmohamed6415 your welcome mate, funny thing is we just live with it, cleaning is a pain, so once a month is fine 🙂 laters Steve
Thank you very much.
Your welcome 🙂
I've bought one and I'm happy with it. Parts as you say are eye wateringly expensive so I think that is where they'll make a lot of profits.
We just love ours, it's so easy to pick up and use, ok in the house, I been doing some testing out on different types of things just to see the results, this is for a up and coming video 😀 most likely after Christmas because of my home baking Christmas video recipes I am putting out 😀😀 laters
I just had to get a new engine but free as the guarantee is for 5 yrs
I love my shark but I do find bin part hard to clean down the sides in between the plastic parts..
Iv never had a problem with the anti hair roller part but I wish we could take it out as on the previous model you could take off the plastic lid on the top to clean it from the top and bottom.. Its amazing now much dust gets in the filters tho tho, I think once a month is needed.
Thanks for the video, really helpful 👍
Thank you 😀 what I am thinking is Shark sell the roller so it's got to be removed some how, I will have a look into this 😀 only thing it's not going to be easy 😀 laters Steve
The answer to the hair wrapping around the roller in any vacuum cleaner is in my view to make that whole section 'disposable'. Just make it a one-finger button action to have it click out and go buy a 'replacement'. I know I would. Make them cheap and widely available. Imagine having a replacement roller for £9.99 on Amazon that needs replacing every couple of months.
Hi I really enjoyed your video but I’ve a question on the main head there are two tiny tiny wheels one either side and mine are FOREVER getting clogged up and what a nightmare it is to pull bits out ! Any ideas? Also would these getting clogged up affect the performance of it in any way. I gave pets and it’s a real problem to keep the shark in tip top condition also any tips on cleaning the actual dust bucket I think they look disgusting after they’ve been used a few times and you can’t really immerse it in water! Great vacuum cleaner I love it although expensive I wouldn’t be without mine this is my third first I had the rocket then the duo clean before this latest version which I now have.
Hi the wheels are a pain, but you just have to live with it, the one thing that affects the performance is the pipes and filters if not clean out, I have a video coming out soon, it's about the blocking of pipes and the performance of it, cleaning it in warm water and dry very well, for me I just love the Shark I just wished they made one that's maintaining free it's would be the best ever 😀😀 laters Steve
I hear you ! I use a flat head to gently pop off those tiny wheel suckers it takes 10 seconds (not too hard as not to damage the wheel just put the flat head tool under the wheel at an angle no on it). Make sure not to lose a tiny felt piece next to the insides of the wheels. Remove the hair manualy. Then I assemble it and use a small cross screw driver to make sure both the wheel clicks on both sides of the metal rod where the wheel is held.
I empty the trash, then remove filters, then use an old toothbrush (cut the bristles short to get into tight spots)to take off most dirt. Then I gently scrub soapy water with my hand without immersing the whole dirt bucket thing. And let it air dry 24 hours.
@@stephaniesalinas7699 thank you 😊🙏
Can you rinse the clear bin part in warm water? Not sure if there are any electrical parts!
Hi Natalie best way is to rinse it, just remove the rear filters first, no electrical part at all, once done just dry out, I put a cloth round and then leave in a warm place 😀👍 laters Steve
Great thank you so much sir
Your welcome 😀
Mine is the same, not really anti-hair at all. That said, hair doesn't seem to cause the roller to seize up which I have experienced on other models.
What also gets bunged up on mine are the little wheels towards the front of the head, just behind the brush roller.
I had a posher Miele one which was solidly built but so badly thought out against hair that once hair got in the roller bearing it melted itself!
We just spend time getting the hairs out the roller, it's always good to have 2 vacuums, one for quicker Cleaning and the other for all the sawdust and cleaning out the car 😀
Thank you.
Your welcome 😀
At 1:44… the filter with the red tab, I’ve looked on amazon and I’m struggling to find one that’s the same shape on Amazon (only ones I can find are more circle rather than this shape!) can you recommend anywhere to get them from or the name to search? Thanks so much in advance, this video is incredibly helpful!
If you type in filters for Shark, Amazon, Ebay, and Google you will find them, £6.99 for the kit 😉 laters
Hi guys now if you are thinking about buying this cordless vacuum in the black Friday deals you need to see this video first laters 😀😀🍺🍺
Your instructions are good but is it possible to take out the fins roller so that I can clean the window which has collected lots of baked on dust?
You can't do it easy, be mindful of taking it to bits and not getting back the same way as it was 😀 if you do intend to have ago. Please let me know if you found any issues with it laters Steve 🙂
Thank you so much. I’d like to get the big brush off to clean the plastic view panel. Do you know if that’s possible? Xx
The best thing I did for view panel, rap a cloth round the big roller and just roll back by hand ✋️ may have to wet the cloth, it works the best, cleaning up the big roller, I use a pet brush 👌 😀
@@crazybaker1 thank you so much for your ingenuity 😀
@@deborahryan4829 your welcome 😀
Thankyou
Thank you
Your welcome 😀
Hi great video. Do you know how to get the large anti hair wrap roller out? I need to clean the plastic window underneath as it’s so filthy I can’t see the roller through it from the top! Will I need to unscrew and take the whole head apart? Also the tiny little castors are completely clogged up with fur. Thanks.
I have had it out, but don't waste time do this, it doesn't seem to go back that easy, the small Castors you can just pull out and then they pop back in, but generally you just need to clean it with soapy water, best thing I got was a bottle wash brush, great for getting in smaller parts 😀
I had the same problem 😕 ended up rolling a damp cloth into the roller and out the other side a few times to clean it and it's clean now so all good 👍
How to clean the hair on the small front wheels. I popped them out with a screwdriver. Your thoughts please ??
Hi mate not got that problem with it 😀😀 when you think how much we paid for this vacuum, I have less problems with our electric miele S571 super air clean, have you noticed that the battery doesn't last long now ? Funny thing is I have only had our 2 month 😀 laters
@@crazybaker1 I purchased the one with three batteries only have it two weeks . Prior to that a Dyson V6 a total disaster as we have two long haired collie dogs . The main roller brush head motor and small wheels always getting clogged up. I still have my Miele corded as standby '
@@ThomasAMcCormack funny we can't beat the good old days 😀😀 it's the same in my bakery with ingredients they change things all the time, I just think if we could go back in time 😀 laters
You're a star,I knew how to dismantle everything,roller etc but bits kept throwing out,obviously loss of suction which it was.But I never knew how to get to the filter as I can't find instructions. Banged both out as still in good knick, no splits and bingo,great suction again Thank you.By the way you can wash them and thoroughly dry can't you?
Hi, you are welcome 😊 I have tested out water so be very careful not hot water 😉 laters Steve
got paperclip stuck on other side of rear roller - so how do you take the brush roller out to get at things like that that you can see through the plastic from the top?
You don't 😀 short for you 😀
Try cutting a piece of wire coathanger to hook it out
Hi Steve
Do you know what the part number for the soft roller is
Many thanks
Dave
Hi Dave I don't have part number, but if you go down on to Shark parts website put in your model number and then you should find out the part required, I have also been on Amazon and Ebay there's a number of companies doing parts, only some may be cheaper copycat parts with out test out my self, I would go to Shark websites thanks mate laters Steve
Can you put warm soapy water in the canister but to give it a good clean out or will that damage the filter inside?
Hi remove the dry filters first, then wash the the other parts with warm water, I did use soap for a bit and it was ok, but I would just keep to warm water best, if you use soap make sure it doesn't have salt in it, I have been washing it out now for 4 months and it's working out great, important that you dry it well 😀 hope this helps laters Steve
@@crazybaker1 thank you
Do you know if I can pop off those two tiny front wheels without damaging or breaking something? I had similar wheels on my corded shark, but they obviously pop off..these ones, not so obvious. I see a couple other comments about them in this thread. Such a pain!
I am not sure if the wheels come out easy or not, I was looking at that last week, the Mrs Crazy don't want me to take all a part, she said it's not broken 😀 I have a work shop manual on it's way which may have all the answers 👍 laters Steve
@@crazybaker1 hi, any news on this? I'm also interested in cleaning the hairs stuck around those tiny wheels
@@carlafg1 the small wheels just put out, after cleaning just push back in, be careful not to break them, you need to hook around the small metal bar, it's a pain in the bakery 😀 laters
@@carlafg1 I got the little rubber wheels off very easily by putting a flat screwdriver in either side , and gently and evenly lever them and they pop out no problem .
Loads of hairs get stuck in the bearing recess, but a little washers shaped disc of hair just lifts off the shaft either side, and just pop them back in again eaten pressure, this time on the centre of the rubber .
Very satisfying .
Help just been through everything no blockages but no suction and everything clicked into place so tight. Recently had to have a new engine wondering if that doesn’t fit as well as the old one Any ideas thanks
Well, if you done everything, it must be like you said motor, I have not come across this before but I am very interested to know 🙂 laters Steve
@@crazybaker1 thanks will have to get back to Shark
Hi my exact shark is making a noise from the motor. No burning smell tho. I have clean all filters and it is still making it. Any ideas? It is only 2 months old
This is a video I did with a different sound. Check it out, and it may be helpful. ruclips.net/user/shortsHzjJbIqI2ZM?feature=share
Thanks for the video. There are still questions - how to clean the multicyclone system? Is it collapsible? My vacuum cleaner is already a year old and I think compressed dust has accumulated there. And the second question is that the hair got wound on the attachment of the second roller (bristly), you did not show how to remove it.
With the hairs, I just pulled them out or used a hair brush. I'm not really sure what the meaning of the multi cyclone as my one doesn't have one, but I would use a 2nd Vacuum cleaner to vacuum it out much better way 😉 laters Steve
Thanks for the video! Is there a way to remove waste (plastic money bag) that’s got stuck on the foot of the vacuum? On the top area. I can see it and it’s just not moving. When you removed parts on your video I was hoping you would show how to remove the top clear of the foot. Please let me know if you know how to do this, many thanks!
I don't know 😕 sorry, I have been trying to work out why it doesn't come apart
I took the roller off and used a thin screwdriver wrapped around a wet wipe and cleaned the clear window on the bottom part of it, looks like it isn’t meant to come off without removing the yellow hair roller which i wasn’t going to attempt
thanks for posting the Video , not sure if mine needs a proper Service at Shark , doesn't seem to be working quite right . I want to strip as much of it down as possible to clean everything .
I find that most of the time cleaning the shark helps 😀
@@crazybaker1 Thanks again , I done it , I spent about 25 minutes Deep cleaning the Shark and it seems as good as New again !! , you have saved me a fortune :)
@jimshaw68 your welcome mate 👍 😀
Any tips how to get a two pence piece out of the suction pipe ??
Congratulations 👏 the winner 🏆
Thank you for video is really great ? Is this hoover good to buy ? Or shell I go for something else ? Thank you again
Funny thing is all battery vacuums are around about the same, they are all plastic, the most expensive ones do have some more power and better build quality, but it's down to the price at the end of the day, for us we have Shark for quick cleaning for carpets, but for all the time we have a electric meile which walks over everything it's a old one, so basely it's down to how much you want to pay, now the shops are now all open, I would recommend going to John Lewis and test some out, in our store has at least 20 different vacuum cleaner for sale and to test out, best of luck 😀 laters Steve
@@crazybaker1 how about corded one such shark Hz 500ukt? Do you think this will be any better ?
@@RandomVibes505 to be honest not test out that one, thing is today most vacuums are not very powerful because of EU regulations, don't forget you need the vacuums for your car like us 😉 yes you need to go to John Lewis, I am not sure if you can test them out at curry's but they sell loads of them 😀👍
Thank you for your information, im new owner
Your welcome, if you need help at all let me know 😊 laters Steve 😉
You can open the screws with an old French franc.
Does the yellow and black roller come out? I have a newer model and they have a window and it’s filthy!!!
And is it a Allen key or a screw driver for the bottom? My husband sucks a load of washing powder up and it’s all stuck
Mine is the same, to remove the bigger roller is very difficult, it can be done but it takes a long time, it's been made to be replaced if it gets damaged, only way to clean the window is to put a kitchen cloth round the roller and by hand turn it round 😉 hope this helps 😀 laters Steve
@@danielle18d I did the same with bread flour 🙂 it's the star type screw driver like a allen key, it's a pain doing it, but it gets easier after 2 times 🙂
Does anybody know how to get the clear casing behind brush rolls clean? Can’t see any way to open case from the top
It's one of those questions 😕 I don't know sorry
Mine was full of debris at both ends of the main brush which cannot be accessed from the front.. (I could see it from the front of the vacuum) I took a small screwdriver and managed to clean most of it out. I may have broken one the plastic rings but at least, now I can vacuum my shag area rugs again.
@@rickisimon3907 mate I am with you on this 👍 laters Steve
I use a baby wipe folded up and just feed it through the gap and use the roller to turn t, it makes a BIG difference. Good luck
How do you clean inside the tubes? Mine are blocked I think
Hi yes I did 😀 my one was full of hairs and bits of paper, one thing I have notice if the filter is not clear the air doesn't suck well and this could cause the blockage, so I now hold on the maximum power, the only down side is the battery runs out quickly 😀 laters Steve
I use a long piece of dowel, cheap from B&Q
Hi. Is there any way of removing the big roller!?
I take it you are talking about the big one, well I start to remove all the screws and pull it a part, but I stopped because I just can't get it top to come apart fully, something was holding it, when get time I will be having a go again, I have seen it apart in pictures, but I just don't know, 😀 laters Steve 😀
So the second brush, with the yellow parts in it, is not removable? Not at all?
Well it's not very easy on this model, and I would not be doing that again for now, some Shark models are very easy, not this one 😉 when I get the time, I will be doing a video just to show how difficult it is 😀 laters Steve 😉
@@crazybaker1 thanks a lot for that quick answer! Your video was very helpful!!!
How do you clean out under the brush can you take the main brush out?
Hi the man brush is a pain, the only way to clean or clear is to remove the things by hand, I have removed the brush just to see how to, but it's the time doing it, and you won't want to do this type of thing unless you need to replace the brush 😉 I am going to do a video to show this at sometime 😊 laters Steve
@@crazybaker1 thanks for the reply i just used the wipe through the roller technique eventually done it major design fault with shark not recommended them because of this. American models seem to have it
@@shabaz621 over the time I have had the Shark, I did find some Shark models that did have removable brush 😳 wait for it 😀 it's the same brush replacement for our model 😀
my daughter has long hair and this hoover doesn't get the hair all tangled . threads are different
Lucky for you 😀
I find that the
stick on this vacuum gets blocked
Wow, im surprised folks seem to have ao many issues with this. First off, mine works great and its old, that brush is for HAIR, and as anyone with long hair and shedding pets will tell you, hair jams up vacuum brushes, period. in particular, long HAIR, when you vacuum, spools around the head and jams up the bristles as well as making it difficult for it to turn. The longer your hair the worse it is. Traditional brushes, no matter the vacuum require me to get put the seam ripper or scissors to un tangle it every other time i use it.
Pet floof will always eventually need to be pulled out of bristles on any vac too, so those rubbery blades are fantastic. I cant remember the last time i had to flip over my vacuum to perform hair removal surgery.
Also, vacuums are for cleaning, but they too must be occasionally cleaned and maintained.
One big issue is new carpets which will block up the pipe and rollers, I always here about pets' hairs, but luckily for you that you don't have new carpets in your house, as you said you have pets running around 😉 😜
Where can i buy those filters? I search on internet and i can.t find it to buy.
sharkclean.co.uk/systempage.accessorysearch.pagelet2-page-cms-systempage.accessorySearch.pagelet2-Page
I use a seam ripper on the bar to get the hair off
Sounds good 👍
4:48 what’s that thing called
But how can I get the clear bit clean mines almost black!
I know what you are saying, our is now 2 months old, so I am go to wash in warm water with a bit of washing liquid, now for the head I am raping a small cloth around the big roller with the brush wet, and just turn the roller round, now you will need to this more than once, now replace the cloth with a dry one. I amazed how clean it turned out. Funny I have done this at the same time as this reply 😀😀 laters Steve
@@crazybaker1 thank you!!
Mine is spitting out dirt I have cleaned it all out any ideas ?
Did you check the filters