How to open and lubricate your E61 grouphead Cam (PL62X)
HTML-код
- Опубликовано: 12 авг 2020
- Finally here is my attempt to open and lubricate MaraX cam head.
My advise is just please be extra careful when unscrew.
E61 Grouphead machine has been around since 1961, so many videos already available on youtube from across many brand.
E61 Groupdhead is pretty straight to the point and easy to fix on your own.
Despite of your machine brand, you can actually find plenty of spareparts for E61 Grouphead online, therefore this is truly a great advantage of having a E61 Grouphead
If you would like to purchase Lelit Product:
Head down to our website: ace-homebarista.com/
If you are looking for sparepart, send us email: ace.homebarista@gmail.com
Follow our facebook: / acehomebarista
Instagram: / amateur_coffee_enthusiast
Instagram: / ace.home.barista
If you in Indonesia and would like to purchase this visit our
Tokopedia: To purchase Lelit Bianca: www.tokopedia.com/acehomebarista
Music: Pancakes
Musician: Jef
A very, very good & useful video. Very clear instructions and excellent, clear photography.
Many thanks.......all the way from London.
Thank you for the clear video. I followed the same steps for my Lelit Bianca v3 and it was an easy job.
Putting the level in the middle position before disassembly was a great tip which saved me a lot of time. I was able to easily put the cam back in, and the whole process just took about 5 minutes.
Well I've just opened up and lubricated my MaraX group head for the first time - I had your video playing on my iPhone as I did it......it was so helpful, clear & detailed.
A 15/16 inch spanner / wrench fits the size of the nut perfectly and is long enough to undo the tight nut easily leaving no scratches.
I couldn't have done it without your video !
Many thanks......all the way from London.
Your suggestion to use the handle to slide the shaft back in was a lifesaver. Also, many other videos claim that the shaft cannot be re-inserted incorrectly. They are wrong. You must replace the cam in the same orientation as when you removed it (I suggest with the lever half up. But if you manage to reinsert the cam even a 90 degrees off, you will not be able to lift the brew handle when you re-assemble, though you CAN re assemble.
ruclips.net/video/pb7Gub7r1DI/видео.html
This video was very useful. And yes it was little bit tricky to reinstall the shaft back
Excellent explanation and detailed instructions, thankyou so much! Keep going!
Brilliant instructions. Thank you so much. I was dreading having to be without my machine for a week or 2 to get this fixed at a shop. Fixed it myself in about the same amount of time as the video runs for. Thank you!
Thank you so much!
Our machine had made a scratching noise for months and I finally had the balls to just go for it! Now it is as good as new!
this video is what im looking for! thankyou for the detailed information
Great video! My Synchronika was making some squeaky noises and turning quite rough for some weeks. Now it’s smooth as butter. Was super easy, thanks to your explanation.
Super detailed and helpful. Thank you so much.
I really like your video, its very clear and infromative, keep on making great video!!
What a nice explanation video, love it!
i learn so much from this video, thank you!
Great video! Fixed my issue!
great explanation, i love it!👍
Thank you for the useful video, very much appreciated.
this video really help me, thank you
now my machine is greased! thank you for the clear and easy to follow video 👍
very informative thankyouu! the information is really clear.
Great vid!
Very informative! so cool
Terimakasiii,, tata cara tutorial / How To nya membantuu bangett nii buat kita yg emang mungkin ada kesulitan,, nambah pengetahuan baru juga jadinyaa,, Thank Youu!! 🙌🏻🔥
Very useful video!
very helpful! thank you
This really helpful
great explanation, thank you! :D
Thankyou for sharing!!
thankyou for the video!
very helpful video, thankyou
super detail!!
belajar banyak bgt dr video ini, thank uuuu!
Thanks for the info, i really want to buy this product rn!!
penjelasan yg clear dan detail, thank you!
amazing info 👏🏼
Sempat bingung kemarin cara lubricate yang benar gmn, skrg jdi kebantu, thanks
thankyou for sharing!
kerennn!! so insightful
this vid is next level marketing ! I really want to buy this rn!!
Kalo emang nyamuk juga doyan kopi boleh aja dibeli
www.tokopedia.com/acehomebarista/version-2-coffee-maker-lelit-marax-heat-exchanger-espresso-machine?PDP-41083808-3341914452-260622
Videonya sangat berguna. Tutorial disampaikan dengan jelas dan detail, pengambilan gambar video juga jelas dan enak untuk dilihat. Keren!
Thanks, helped a lot
thankyouuu jadi belajar bnyak dari vidio ini!!
Penjelasan sangat jelas dam mudah dipahami
Penjelasannya jelas bgt!! Kerennn
Nah buat pecintaa kopiii dan para barista bisa bangett liat channel video ini, penjelasannya lengkap poll
Good video showing whats involved in dismantling and lubricating the lever. Although its unfortunate he used part of an old plastic bag or whatever to cover the large chrome nut in his attempt to protect the chrome when breaking the nut free.The plastic wrap was much to thin to protect the chrome from the amount of force needed to loosen the nut. His other error was using a thin walled bicycle wrench as the tool use to break the nut free. If you pause the video at at 2:48 - at the bottom of the video frame near his palm... you can see he has chewed up and chipped off some of the chrome on the high spots of the nut where the wrench was exerting all its force. It would be better to follow his advice and protect the chrome on the nut but wrapping it with several turns of electrical tape. Even better... find a wrench with wide jaws so the entire surface area of the hex portion of the nut can distribute the force... even better use a socket wrench. Although not a Lelit... here's another video also showing the disassembly process. ruclips.net/video/CajVhArzDNY/видео.html
Would a socket wrench be long enough to get pass the brass peg that sticks out beyond the nut? I’m considering getting a socket wrench set to avoid scratches.
@@mcprjosmel Sure... a metric deep socket that would clear the shaft of the cam would definitely work. You could also get the same benefit by using a box end wrench if you can't find a socket thats deep enough. Regardless... make sure you get a 6-Point socket or box wrench and NOT a 12-Point! The 6-point has more surface bearing area and offers the least chance of damage to the chrome. Even still I'd probably still wrap the nut with a layer of tape just to be on the safe side.
@@eltonnoway7864 I used an adjustable wrench like Lelit Insider did in his vid. But I put about 5 layers of painters tape on each side of the wrench itself. Worked a charm.
@@mcprjosmel The job calls for a 22mm "Deep" socket. Get yourself a good one of those in your toolbox and this job is a cakewalk.
Untuk pencinta kopi terutama barista perlu melihat intruksi ini begitu detail dan bagus mengenai mesin kopi.
vidionya mudah banget di mengerti, auto subs ini mah🤩
so cool!
Suka bgt informatif n lengkap!
nice tutorial:)
kerenn, videonya berguna dan penjelasannya detail👍
Well doneee
Bermanfaat sekali informasinyaa. TERIMAKASIH KAAA
Thankyou kak! Sangat informatif👍
wah jadi lebih ngerti, makasih videonya informative bgt!!
videonya sangat membantuuu. terimakasiiii kakk
Instruksinya jelas banget kak sangat membantu, terima kasih!
Jelas bgt kak informasinya!! Hehe
wow thank you, sangat bermanfaat!
Tutorialnya informatif banget
instruksinya jelas banget, mksi kak
Makasih kak, lengkap bgt infonya! keren😊👍🏻
Belajar banyak dari videonya! Makasi ya
Keren kak videonyaa!!!
Dapat ilmu banyak banget dari video ini, video yang sangat informatif
Instruksinya membantu banget kak kerenn
informatif bangeet, kerenn
penjelasanya sangat mudah untuk dimengerti 👍🏻
Informatif bangett!
Many thanks! All good now. :)
Oh gitu caranyaa, keren bang!
videonya bermanfaat banget, thankyouu
Informatif bgt👍
Selalu menarik kontennya👍🏻
Video cukup informatif dan menarik
sangat membantu sekalii, terimakasih:)
Brilliant
Woww good
keren bgt videonya!!
Wah videonya sangat informatif!
wah videonya sangat informatif!
Perfect explanation, this is exactly what my ECM Synchronika looks like. I pulled out everything to lube die to a squeak and couldn't get it back together until I found your video.
Glad to know that 👌👍
Informatif sekali!
Thank you atas informasinya gan
sangat informatif kak terimakasi banyak
Videonya membantu sekali, terima kasih
sangat informatif, jadi ingin membuat kopi sendiri
sangat membantu sekali!
wahh,, menarikk makasii yaa
informatif banget!
Kerennnn 😍
Keren banget vidionyaaa informatif
keren bangett!!
keren bgt videonyaa aaaaaaaaa
Keren banget!!'
sangat bermanfaat
Wahhh makasih banyakk
Also - PLEASE can you do a milk frothing video specifically for the Mara X? I would appreciate any tips to create beautiful microfoam like you can!
Yes will do that soon
Video nya keren dan bagus, samapi di bahas ke detail-detailnya