Hello everyone. Thank you for all the support! By the way I wanted to share my new album #canalwalk ruclips.net/p/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0&si=rblwnXeCnw5xJfP9
English may be your second language, but you give clearer, step-by-step instructions than 95% of the fools who only speak English on RUclips. Plus, you typed out the instructions in the descriptions. Thank you, for all of your help! Very easy.
thank you so much for the kind words. I wish you well and all the very best. To be honest when I was starting my channel, I've received a lot of comments about my accent, about how I struggle with my English and they suggest to just stick with my native language. But then I got other viewers or subscribers that will have hard time reading closed captions and can understand better if I speak in English. They are either from India, Thailand, Portugal, Mexico, Malaysia and other countries so I stick with it and try to improve and help. Again thank you so much!
Thanks for the kind words. Yes it has coz I think the memory is partitioned so that the looper and other stuff can be saved. Total effects I think is 100. ruclips.net/video/JxnUTLiGGEM/видео.html
Hello Vincent , i have some troubles with the G1xon , i must press very hard on the switches , i use my fists if i want to use the tuner and trust me i have to force ....I admit that I walked on it 3 or 4 times i don't have a lot of space in my bedroom , should i open it ?It works very well except for the knobs , you aren't sure if you use the wahwah to be able to go back or further on the right sound you need ...Thanks a lot , if there's a solution or not ...
hello It happened to my G1xOn as well as the pedal. I think it's got to do with dirt/dust. That's why I made an improvised case for my Zoom G1xon. What you can do perhaps is keep using the pedal. Another way is probably a small USB vacuum to clean the dust particles.
Hello I have a zoom G1on and would like to update the firmware in your video to get the additional effects. Problem is I get "Illegal Device" error. Please note it is not my USB cable, as it is able to update the firmware from Zoom. Please help, I need the new Fuzz Pi.
Hello. I'd like to say that I've lost certain effects. Haven't used the pedal in some time, but someone could check maybe. I think I am 95% sure I've lost AutoWah, RT Closet, and I can't seem to be able to control the new added Shimmer effect with the expression pedal. And then I am 10% sure I can't control the Particle Reverb like I used to. I think once I saw a post where you could choose which effects to add and which ones to remove? If anyone has it, I'd appreaciate it.
hi vincent, i have a question for you, i have the zoom g1xon, i added the extra effects, and updated the firmaware.....and saved my custom 100 preset bank in tonlib. which i can upload to the pedal no problem......however, i bought a 2nd zoom g1xon, and have updated the firmware , and all the same new effects, but when i try to upload the saved bank of 100 presets i get an error....and it wont let me upload the 100 preset bank to this 2nd pedal. any ideas? cheers mate.
To be honest I haven’t tried it but what I’m thinking is that it’s got to do with the internal memory of the pedal. The new one that you bought, is either a little bit different like incompatibility problem or the internal memory got error in itself. Like needs reformatting. I’m not really sure. Coz it should be ok it’s technically same unit. Don’t know if you’ve seen this video. You might compare and try it. ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=BUbZckBZYVemtYFH
@@vincentryanborres yes its very strange, its the same pedal, same firmware etc....but it just wont let me install my presets into it......i have resorted to adding them one by one, which works on most, but even then some do not want to install and i get an error message.....only when trying certain patches...very weird. thanks man.
It's a pain, isnt it. Hit or miss which could've been just one go supposedly. The Zoom G1xOn is getting obsolete. But, I love this pedal. Very handy to carry to jamming and gigs.
@@vincentryanborres yeah jts a freat little unit, i added 2 extra footswitches connected by 3.5mm male to male cable, soldered to the pcb momentary pads.,,, so i can have it on desktop and still use footswitches for looping etc..,makes it much more useable live...,,try it, its a great mod.,,,
Cheers! Thanks for the suggestion. Yeah it’s so hard for me to do it. I already knew about it before I started this vlogging because I watched tutorials and videos about suggestion on vlogging and yup they all said about this one. Don’t know for some reason that instead of the lens I always look at the screen. I’ve been trying to correct it as well but I gave up and just focus on the content that I wanted to point out or share. Another critique I often receive is my voice is too quiet. Again that’s also something that’s hard for me because it’s the nature of my voice or quality of my voice. Last but not the least is about me having hard time talking in English and also they mention about my accent, some say that I should speak in my own language or dialect so it’s easy for me and then I did that, but some of my viewers said they couldn’t understand as well and if I can speak in English. Hehehe! Anyways cheers!!!!
@@vincentryanborres I hear that man, creating content is incredibly difficult, and I can't imagine the added difficulty in creating content in a language that is not my native tongue. That just seems impossible to me, and is very inspiring. You're doing great, very understandable and please don't take my critique as anything other than hoping to help the hard work you're putting in find a bigger audience. Take care and thanks for the content!
Im not sure, because I think G5N is higher version. This one is for the G1 series and MS-50 and 70. Also it was only shared to me. I hope you can find answer either here or on Zoom G5N forums. All the best!
Hello ! After installing these new effects, for example, I saw that the effect content of the B9- Funky duck preset has changed.Have you had the same problem ?
Yeah, that's correct. With the first update, there are existing effects that was removed and so some patches are affected. I found a solution to it. Here's the link: ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres Is the problem solved ? So, with this method, both new effects are loaded and B9- Funky duck characteristic and other presets are preserved. Is it true ?
@@vincentryanborres Since the 40 new effects negatively affected some presets, I reverted the device back to its original state and removed 40 new effects. How should the next process be? Should I use this effects manager directly without having to install 40 new effects versions? Or should I use effects manager after installing 40 new effects versions?
Furkan Şirin that’s almost the same as what I did. I then just add the effects that I wanted that’s not in the zoom G1xOn. Like the Gold Drive and the Reverb’s and delays. I think you can only add between 25-30 new effects. That’s why the first update that we did is 40 because it deleted some of the effects and swapped by new ones. But with this solution you are more in control of what you want to do.
😁😁😁... cool! thank you 4 making the video, i got a g1on,my first pedal after 30yrs playing... wow, love it, the g1on was stopping production and the store had on sale , last one, no box, storedisplay.... awesome. best buy EVER! .. so many options , easy tweak/edit w usb......nice! .... 40x extra?/// wow, thnks 😁 will try.
there's another option as well instead of this, you can just select the ones you think will suit you. Here's the link: ruclips.net/video/uk07W2axR38/видео.html
@@vincentryanborres omg! soooooo coooooool ☺☺☺ THANK YOU. I DO SKIPP SEVERAL COOL effects , just because i live in old building with thin walls. and use headphones mostly cus i like to play at 02.30am 🤣🤣 ... the 'noise' hurts in between playing... wow! finally 20+ effects are going to be my new toy 😁. THANK YOU AGAIN for reply! and make last video even better. so glad i clicked and subscribed to yours, cheers buddy!
@@vincentryanborres i got the g1on pedal just for the one effect really, H8 ...🤣 EVERYTHING else that came with it included for same price felt like free extras hihihaha... i love my g1on.. thanks, ruclips.net/video/TzkQMVvdt9k/видео.html
Yes, I saw that two years ago. And that's why I subbed to your channel. It was 2018 when I really focused on building my channel. I think the whole year of 2018. thank you so much! Around that time I just kept searching for Zoom G1on and G1xOn users and watched their videos and comment on their channel. Then I do my own thing. And for some reason it worked. On the other hand, the homebased DIY, demo and reviews also worked for me to gain more views and for wider search visibility on the internet. But my subs mostly came from Zoom G1xon.
Was the update finished before you turn he unit off? It should finish everything before you turn off or disrupt the process. I don’t know if this will solve it. ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=Dj0iR9Eeu8yqCo5N
Have you tried restoring it to factory settings? Im not sure if it will work but here's my video on how to restore Zoom G1xOn to factory settings ruclips.net/video/uLu_hTjNyig/видео.html
If reset to factory setting won't work. Perhaps you can choose this other option where you remove the b1xOn effects and replace it with the Zoom G1xON ones. ruclips.net/video/JxnUTLiGGEM/видео.html
Yes, link in the description. But this video is long time ago so I don’t know if the link still works. It was only shared to me. drive.google.com/file/u/0/d/108BOTfEUJIJreEPllZcyKYSqe72QIP3N/view?usp=drivesdk&pli=1
Hello Vincent and all people, here is a question to all g1xon users - how does expression pedal work after these updates? Have you tried recently to assign parameters like speed, wave, mix or whatever it was before update? Someone wrote that with update you loose all (or some) the possibilities with pedal (except wah, volume etc) is that true? Can someone check it out? Cheers!!!
Very good question. To be honest I haven’t tried the pedal in terms of assigning effects. But yeah the wah and volume seems working ok as well as the PDlMnpit. Also after I updated it and there were some effects that was removed in favour of the new ones, I immediately posted a second video as sort of a solution. You got the option here to retain all of the effects and settings of your Zoom G1xOn but add or change some effects. Here’s the link: ruclips.net/video/JxnUTLiGGEM/видео.html
Thanks for fast reply!I'm curious as I don't want to change these pedal benefit , thanks for the link, I will think hard if there is chance to keep home effects and options untouched. Regards
I did it, some effects are still adjustable with pedal, some are not anymore (like particle reverb mentioned in some comments and others) BUT comparing to what the update brings - it was worth it, thanks again for your help. Stay safe man!
I think it's a hack and they just shared online. Lots of my subscribers and friends been asking me about this and I couldn't find it in Zoom website. But then just recently someone gave me a link and I just did it. So far so good.
Plz help me to how to save effect like I need clean and atowha how save near.if I have to go to stage and I need a1 to I9 that is very far sir plz help me to find sir.??
I haven’t tried it but I think it’s ToneLib that they are using for this zoom G1xOn. And the Zoom G1Four uses GuitarLab which was the one that I managed to try.
Yes sir, bale yung part nang memory card ng pedal mo na maiiba ay yung sa effects part lng. yUng saved patches mo di magagalaw yun. Meron akong bagong update na mas madali na naishare din sa akin. Bale pwede kang magcustomise kng anong effects ang gusto mo ilagay sa unit mo or kng gusto mong same na effects plus additional na gusto mo. Kasi yung nangyari dito sa update na to may mga nawala na effects daw gaya ng Autowah at Z organ, etc. Pero itong bagong share sa akin, nasasayo kng i-retain mo ang original patches ng G1xOn saka dagdagan or totally customise mo sya. Eto yung link: ruclips.net/video/JxnUTLiGGEM/видео.html
Oh there was lots of issues on that first update. Here’s our latest update and you are able to customise which effects you want to add or remove. ruclips.net/video/JxnUTLiGGEM/видео.html
That's great news. But did you notice there's some effects that they removed. So if you want those back and want to choose your own effects to add and remove, I made another video. Here's the link: ruclips.net/video/JxnUTLiGGEM/видео.html
Hey Vincent...Pls do me a favour....I have installed Shadows patches on my Zoom1xon and I only have the J group as free...can you please give me the settings for Bass guitar, Chorus,and Tremolo....puede ba email? Thanks....Ramon ("Chubble")
If you mean to update your Zoom G1on, yes you can and here's the link: ruclips.net/video/JxnUTLiGGEM/видео.html But if you mean to make it like Zoom G1xOn. The two of them are already the same in terms of software and effects. The only difference is the Expression pedal or (Wah Pedal).
Hello Christian. So sorry sa late reply. D ko pa kasi na-experience yang problema pero I think may mga nagsasabi na baka sa USB cable ang problema minsan. Sensya talaga kng di ako makakatulong. ruclips.net/video/JxnUTLiGGEM/видео.html
Bought it from eBay. It’s a non slip self adhesive rubber for chairs and tables. Then I just cut it out to shape. So it’s easy for me to switch from Home to Looper to Rhythm
Hello idol im trying to do that but im confuse and worried na baka ma currupt bigla ung zoom pathces q what do you think sir? Kailangan q kaz nyan madaming wala sa zoom q gaya ng arena reverb at metal world
aero Slash parang safe naman sir. If you like kasi Di ko pa natest wait this weekend. Upload ako ng impression ko at sound demo. Saka natin masasabing safe talaga
@@vincentryanborres ginagawa qna nga ngaun idol hehehe ndi na kaz aq kuntento sa patch q lalo na quarantine day everday hangang madaling nag gigitara aq
Hello Tomas, yeah one person also said that there are some effects that disappeared. But I cannot confirm to you because I can't memorise all the effects list but when I opened my personalised patches, they are all seem ok. So, I don't know exactly if there are missing effects.
@@lodiboxing7220 yes pwede na sya. Yan lng din gamit ko pero umiinit yung charger ng phone charger na gamit ko kaya bumili na kng ako ng generic 9v. Pero for short jam or recording ok naman ang usb. Saka bumili ako ng rechargeable battery para pag may outdoors na gig walang problema for outlet.
Im just about to post a video of the new added effects. Just took me a long time to make the video last night and stayed late for editing but still didn't manage to finish.
It doesn’t but because some of the effects are removed so it might affect some of the patches in some ways. But I got a different video that can avoid it. ruclips.net/video/JxnUTLiGGEM/видео.html
Sir parang may nabawas.. Ung funky duck nandun pa kaso Wlng tunog nyang dati prng duck.. Paano Kya un paborito ko p nman un patch n un.. Help nman sir.. Ni restore ko n nga wla p rin..
Sir nasa Pinned comment yung solution kasi di to sa akin ang modification, pinasa lng tapos nag-update din ako saka pa lng namin napuna na wala yung auto wah. May mga nawala pala na mga effects. Bale dyan sa pinned comments merong solution dyan sir.
@@vuvoisacodo2603 Yes sir ganun na lng tapos eto yung link ng software. Pwede mong isa isahin yung mga gusto mong effects base na rin dyan sa G1xOn Effects List na nakuha mo sa Google. LINK FOR THE SOFTWARE: drive.google.com/file/d/108BOTfEUJIJreEPllZcyKYSqe72QIP3N/view?usp=drivesdk
Bro ung akin sinubukan ko to ayaw mascan ung device ng zoom ko sa computer.... Kahit rescan ko walang lumabas pero ready for update lng nakalagay sa computer blangko sya
@@gamesforlowendpc9090 di kaya sa USB cable? DI ko pa na-encounter kasi yan. Pero may mga iba akong nakita na comment nila sabi yung USB cable daw minsan ang problema. Hopefully, mahanapan mo ng solution. Di naman din talaga ganun ka-importante tong upgrade kasi di sya official parang hack lng din kasi to na naishare sa akin. Kaya nagustohan ko kasi may mga ibang sounds na magagamit pero in actual fact marami din after nila gamitin tong upgrade nag-request paano ibalik sa original setting kasi yung mga nagawa nila na patches may mga nawala at di gumana. hehehe. God bless!
@@vincentryanborres uhhmm ok sir salamat ,,,stay ko nlng sa ganito bka masira pa saya ,,,matagal ko n kc to n multi effect ung mga unang una pa to n nilabas ng zoom bumili n ko nito kc nahihirapan ako sa ibang multi ito madami gamitin nakakagawa ka ng mga gusto mo nilalagyan ko lng sa labas ng single noise gate kc d kaya ng zoom lng magiingay sya
@@gamesforlowendpc9090 oo maingay talaga tong Zoom Pero up to now gustong gusto ko yung mga effects nya kesa sa Zoom G1Four. Marami akong vids as Zoom G1xOn nasa playlist ko. Baka magustohan mo.
Sorry bale matagal na kasi tong vid na to. Bale may mga mawawala na effects in replacement sa bago. Pero I posted a solution. Eto yung link: ruclips.net/video/JxnUTLiGGEM/видео.html
you can create a firmware update on your own. Customized with pedal that you want. Here is the link for the firmware editor. It is a java file so no need to install. drive.google.com/file/d/1-s_zQ3ppbXDcUbd-J5RTlkTBt3IjaWy8/view?usp=drivesdk Open the firmware of zoom ms50G or zoom ms70CDR using the editor . Choose the effect that you want to add to your g1xon. Extract - click the pedal that you wnt to add to your g1 then click extract. It will save a ZDL file (this is the file of the pedal.) Then rpeat this step until you selected all the pedals you want. Close the editor. Then its time to upload it to the zoomg1xon firmware. Open the editor again. Then chose firmware of g1xon. Inject .click inject to upload all the ZDL file that you extracted earlier from MS50 or MS70. Click inject to upload the effect to the g1xon firmware. Then save it as new firmware updater. Then update your zoom device. Like the one in this video. 😊 Link for firmware of zoom MS50G (Too mny effect here that was not availble in g1xon) you can extract them all here. drive.google.com/file/d/1-t4s0LRJsDfFE74syxA4BMyN3EqgkqRf/view?usp=drivesdk --------------------------------- Link for zoom MS70CDR (chorus delay and rev) same as above. So many effects to extract here. drive.google.com/file/d/1-vIGv_73GiO6oCbs_T9J909X0O3cfBWG/view?usp=drivesdk ---------------------------------- Link of G1xon firmware (this is the untouched firmware from zoom. You can inject all effect from MS50g or ms70CDR Here. drive.google.com/file/d/1-vckB5AGeMJdOxacEVmEBCaeeFgxbUrL/view?usp=drivesdk ---------- LIST OF EFFECT FROM MS50G THAT YOU CAN ADD IN G1XON drive.google.com/file/d/101446tqtQ97kRayoLaHCHe9JCAjk3CCV/view?usp=drivesdk LIST OF EFFECT FROM MS70CDR THAT YOU CAN ADD TO G1XON drive.google.com/file/d/10-Ptth-sKl-B0sTWTu05Ual08LLw8NHS/view?usp=drivesdk
@@vincentryanborresmy pleasure to help everyone sir. can you make a tutorial video for it sir. Again sir this is only for G1on/G1xon. Compatible firmwares pedals to G1xon / G1on are MS50 , MS60, MS 70, B1on, B1xon. .you can get the effect there and add it to G1xon. (ZDL format) ive already uploaded ms 50 and ms 70. Ms 60 , B1xon is for bass . I havnt downloaded the firmware yet. It is comptible though. if you want to use your g1 for your bass you can download the firmware of b1xon and ms60 in the zoom website. If you want to modify G1four using the editor, you can get the padals you want from the compatible firmware. firmwares of zoom g3x, zoom g3n, g3xn, g5n, b3n, zoom ac2, zoom ac3, b1four, b1xfor models. They use ZD2 format.. you can download it in the zoom webssite.
Do i need the effect manager to do that or just need the software in the link you shared?I tried to do with the effectmanager but lost my patches.I see the names of my patches but if i click on the effects it says its empty.Please what do Im wrong sir.Can u help me, Thank you .
I haven’t tried but I think you can. Here’s my other video where you can select which effects you want for your Zoom G1xOn. ruclips.net/video/JxnUTLiGGEM/видео.html
Nice 1 po sir naupdate ninyu narin po ung sa inyu sir ung saaken ung inupdate ko ang nangyare ung ilan sa mga patch ko date napansin ko nakalagay missing pili lng naman po kaya ang gnawa ko sa mga missing patch ko denilate ko nalang po
Yes sir finally, hehehe. Salamat sa info. Tapos di ko pa na-try actually. Kaya di ko alam kong may mga missing patches ako. Bale nag-check lng ako ng mabilisan kasi gabi ko to ginawa tapos natagalan ako sa video editing. Hanggang 2 am ata ako natapos. Kaya umaga ko na inaupload ang video. Check ko to mamya at try ko yung new effects.
@@vincentryanborres haha napuyat s pagedit ng video c sir... Sir if kaya po ninyung gawan ng sulusyon ung ilan sa mga missing patch paturo po salamat...
I don't think it's official sir. Because lots of my friends and subscribers has been asking me about it and I searched on the internet but I couldn't find it. Not until someone left me a link and that's when I tried it. And Im amazed. It worked. Got new additional effects and my patches are still there. So yeah. totally awesome. I will post video next time to test these new effects.
Hello sir, it was only shared sa akin by one of my subscribers and I think para pa lng to sa G1On/G1xOn parang hack sya or modification, di sya official update.
Pwede sya pero may mga nabubura kasi na effects kaya yung iba d gusto netong update. Meron akong another video where pwede kng pumili kng alin lng na effects yung idadagdag mo eto ang link: ruclips.net/video/uk07W2axR38/видео.html
Yes it can but here’s my more updated version where you can choose your own effects to add on your zoom g1on ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=fBNJE0vUA-89lgiv
that's good to hear. I was at work earlier. Didn't get the chance to reply to you immediately. Try and find an improvised case for your Zoom to protect from dust.
@@vincentryanborres Thanks a lot Vincent , i understand that if you were working it wasn't easy to reply , in fact thank you to simply reply ...I will try to protect it from dust from now on , at least covering it with somethig ...It was funny to see it working right after having written to you , once you go in the settings you can find some real good sounds with it , i hope it will last ,and us too ..^^ ! Take care amigo ....
@@sirzembla4512 that’s really great news. By the way I got lots of tutorials on this pedal. You might want to check out. ruclips.net/p/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
@@vincentryanborres Thank you Vincent , i was charging my phone excuse me ,i use it as modem ,the walls are thick here... I'll see that tomorrow if God Wants ,thanks a lot for your kindness ...
Sorry I don’t speak Spanish. There are similar words in my dialect especially when I count like uno dos tres quatro cinco but not fluent with Spanish. By the way this might help. ruclips.net/video/JxnUTLiGGEM/видео.html
I hear you say you have a G1Four? I got a Four X - been working on reverse engineering the MIDI commands for it - ruclips.net/video/B5W7c5dEVmI/видео.html If you know of any please let me know. So far I can change the patches, grab data for FX and patches plus modify FX's / Params. I need to set bounds for the various effects. Actually I think this G1 On has particle reverb which the G1Four doesn't have. I think the G1on is definitely more powerful than the G1 Four.
Hello Stephen, I've checked your video. It's beyond my capacity. But I enjoyed it. Had a bit of hard time with the computer language. hehehe. But yeah its very interesting. Thank you so much for sharing it.
@@vincentryanborres if there are any folks here with a Zoom pedal and a Windows box, Rapberry Pi or Linux (ok i can show some love for Mac too :-)) and they want to explore external control of the Zoom G/B maybe A pedal series please check out my video and let's see if we can collaborate. All I am doing is sitting in the middle of the conversation between the software (GuitarLab) and the Zoom unit. It seems it talks standard midi - so my aim is to work out and document the SysEx strings that allow you to modified the patch parameters in real time either with some off the shelf midi gear (to be determined) or make our own with Pi, Arduino or ESP (which opens up bluetooth possibilities). I want to make music - but I love tinkering with control surfaces - and what we are uncovering here could be programmed from Steinberg Cubase, Logic, Reaper possibly even Abelton etc etc. Thanks for listening.
By the way, can I share to you my recently released album? Here’s the playlist: ruclips.net/p/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0&si=rblwnXeCnw5xJfP9
Hello everyone. Thank you for all the support! By the way I wanted to share my new album #canalwalk ruclips.net/p/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0&si=rblwnXeCnw5xJfP9
English may be your second language, but you give clearer, step-by-step instructions than 95% of the fools who only speak English on RUclips.
Plus, you typed out the instructions in the descriptions. Thank you, for all of your help! Very easy.
thank you so much for the kind words. I wish you well and all the very best. To be honest when I was starting my channel, I've received a lot of comments about my accent, about how I struggle with my English and they suggest to just stick with my native language. But then I got other viewers or subscribers that will have hard time reading closed captions and can understand better if I speak in English. They are either from India, Thailand, Portugal, Mexico, Malaysia and other countries so I stick with it and try to improve and help. Again thank you so much!
Idol ok na effective nga nag karon naq nung mga wala q noon sa zoom q salamat sau at tropang nag suggest long live anf stay good health for us
aero Slash yehey! Finally! Sige enjoy. Happy for you!!!!
Nice to know there's a new update... Thanks Vincent..
welcome! Here's where to get the link to download the update. ruclips.net/video/l9tbBsV2e_U/видео.html
Thanks Vincent for the info and sharing, update is complete ! :-)
Cool! Glad to help and happy for you
Hey man, great video. This multi FX pedal has a affects capacity limit? Do you know how many effects i can put in this thing? Thx and new sub
Thanks for the kind words. Yes it has coz I think the memory is partitioned so that the looper and other stuff can be saved. Total effects I think is 100. ruclips.net/video/JxnUTLiGGEM/видео.html
What about the effects? Does the standard effects that came in with the zoom stayed or does it get replaced with the downloaded effects?
Here’s my other video where you can customise which effects you like to add and remove. ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=1Dipgq2QQnp2njnz
Looking forward for new tones sir! 😊
JP Beloro thanks JP
Hello sir. I am new subscriber of your channel... From India..
hello and thank you!
Wow update na agad!!! Thank You sir
Kyle Ryan Nerizon welcome! Ayos!!
Sir pwedeng ka bang gumawa ng patches with the new effects (Kung Better ba ung mga bagong effects)?
Awesome! Worked perfectly. Thanks very much.
you're welcome! I also got another video, perhaps you want to check it out. ruclips.net/video/JxnUTLiGGEM/видео.html
Hello Vincent , i have some troubles with the G1xon , i must press very hard on the switches , i use my fists if i want to use the tuner and trust me i have to force ....I admit that I walked on it 3 or 4 times i don't have a lot of space in my bedroom , should i open it ?It works very well except for the knobs , you aren't sure if you use the wahwah to be able to go back or further on the right sound you need ...Thanks a lot , if there's a solution or not ...
hello It happened to my G1xOn as well as the pedal. I think it's got to do with dirt/dust. That's why I made an improvised case for my Zoom G1xon. What you can do perhaps is keep using the pedal. Another way is probably a small USB vacuum to clean the dust particles.
3:01 so our old patch will not get rewrited/reseted? I dont know about that sir.
Some of the builtin effects will get deleted. And then you’ll have additional effects. So it means that it will have impact on the existing patches.
@@vincentryanborres thanks sir now i understand how it works.
Okie dokie!!! There’s lots of really good effects to choose there.
i lost my auto wah effect. how to fix?
Hello
I have a zoom G1on and would like to update the firmware in your video to get the additional effects.
Problem is I get "Illegal Device" error. Please note it is not my USB cable, as it is able to update the firmware from Zoom.
Please help, I need the new Fuzz Pi.
There's other options there or more options. Just click it and it will drop down and you can choose.
same problem , impossible to update my zoom g1on ,i think the update works ONLY on g1xon not the G1on... what's a pity ...
@@nikkoberserker is only G1Xon
@@sevsam6138 ok thanks ,i find an other software for all Zoom and it's works great ! if you want it , search : zoom effect manager .
@@vincentryanborres where is this option more options than you mentioned? Are you on the pedalboard or on the program?
WOWWWWW SHIMMER REVERB?! Thank you for sharing!! might try this
welcome! Glad you like it.
Hello. I'd like to say that I've lost certain effects. Haven't used the pedal in some time, but someone could check maybe. I think I am 95% sure I've lost AutoWah, RT Closet, and I can't seem to be able to control the new added Shimmer effect with the expression pedal. And then I am 10% sure I can't control the Particle Reverb like I used to. I think once I saw a post where you could choose which effects to add and which ones to remove? If anyone has it, I'd appreaciate it.
Perhaps this can help. ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres Thanks, I appreciate it a lot.
@@EmanuelVillaverde98 you’re welcome. Glad to help!
hi vincent, i have a question for you, i have the zoom g1xon, i added the extra effects, and updated the firmaware.....and saved my custom 100 preset bank in tonlib. which i can upload to the pedal no problem......however, i bought a 2nd zoom g1xon, and have updated the firmware , and all the same new effects, but when i try to upload the saved bank of 100 presets i get an error....and it wont let me upload the 100 preset bank to this 2nd pedal. any ideas? cheers mate.
To be honest I haven’t tried it but what I’m thinking is that it’s got to do with the internal memory of the pedal. The new one that you bought, is either a little bit different like incompatibility problem or the internal memory got error in itself. Like needs reformatting. I’m not really sure. Coz it should be ok it’s technically same unit. Don’t know if you’ve seen this video. You might compare and try it. ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=BUbZckBZYVemtYFH
@@vincentryanborres yes its very strange, its the same pedal, same firmware etc....but it just wont let me install my presets into it......i have resorted to adding them one by one, which works on most, but even then some do not want to install and i get an error message.....only when trying certain patches...very weird. thanks man.
It's a pain, isnt it. Hit or miss which could've been just one go supposedly. The Zoom G1xOn is getting obsolete. But, I love this pedal. Very handy to carry to jamming and gigs.
@@vincentryanborres yeah jts a freat little unit, i added 2 extra footswitches connected by 3.5mm male to male cable, soldered to the pcb momentary pads.,,, so i can have it on desktop and still use footswitches for looping etc..,makes it much more useable live...,,try it, its a great mod.,,,
Nice! Might do in the future. I need a bit of courage soldering though hehehe. I mean I can but always a bit shaky. hehehe.
Great tutorial, very helpful! Small critique, talk to the lens, not the screen. Thanks for the content!
Cheers! Thanks for the suggestion. Yeah it’s so hard for me to do it. I already knew about it before I started this vlogging because I watched tutorials and videos about suggestion on vlogging and yup they all said about this one. Don’t know for some reason that instead of the lens I always look at the screen. I’ve been trying to correct it as well but I gave up and just focus on the content that I wanted to point out or share. Another critique I often receive is my voice is too quiet. Again that’s also something that’s hard for me because it’s the nature of my voice or quality of my voice. Last but not the least is about me having hard time talking in English and also they mention about my accent, some say that I should speak in my own language or dialect so it’s easy for me and then I did that, but some of my viewers said they couldn’t understand as well and if I can speak in English. Hehehe! Anyways cheers!!!!
@@vincentryanborres I hear that man, creating content is incredibly difficult, and I can't imagine the added difficulty in creating content in a language that is not my native tongue. That just seems impossible to me, and is very inspiring. You're doing great, very understandable and please don't take my critique as anything other than hoping to help the hard work you're putting in find a bigger audience. Take care and thanks for the content!
Brandon Bames appreciate your comments! Wishing you well and all the very best!!!!!
Hi @vincent do you know if there is some like these for G5N?
Im not sure, because I think G5N is higher version. This one is for the G1 series and MS-50 and 70. Also it was only shared to me. I hope you can find answer either here or on Zoom G5N forums. All the best!
Hi Vincent, some effects like (auto-wah) are lost after the update, can we still recover them?
Yes we found out about it after I posted this vid. Here’s the solution ruclips.net/video/JxnUTLiGGEM/видео.html
Hello ! After installing these new effects, for example, I saw that the effect content of the B9- Funky duck preset has changed.Have you had the same problem ?
Yeah, that's correct. With the first update, there are existing effects that was removed and so some patches are affected. I found a solution to it. Here's the link: ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres Is the problem solved ? So, with this method, both new effects are loaded and B9- Funky duck characteristic and other presets are preserved. Is it true ?
Furkan Şirin yes because you can customise what you want to add and retain everything that’s in there.
@@vincentryanborres Since the 40 new effects negatively affected some presets, I reverted the device back to its original state and removed 40 new effects. How should the next process be? Should I use this effects manager directly without having to install 40 new effects versions? Or should I use effects manager after installing 40 new effects versions?
Furkan Şirin that’s almost the same as what I did. I then just add the effects that I wanted that’s not in the zoom G1xOn. Like the Gold Drive and the Reverb’s and delays. I think you can only add between 25-30 new effects. That’s why the first update that we did is 40 because it deleted some of the effects and swapped by new ones. But with this solution you are more in control of what you want to do.
My metal word distortion is gone, how do I restore it, please provide a solution
Here’s the solution ruclips.net/video/JxnUTLiGGEM/видео.html
😁😁😁... cool! thank you 4 making the video, i got a g1on,my first pedal after 30yrs playing... wow, love it, the g1on was stopping production and the store had on sale , last one, no box, storedisplay.... awesome. best buy EVER! .. so many options , easy tweak/edit w usb......nice! .... 40x extra?/// wow, thnks 😁 will try.
there's another option as well instead of this, you can just select the ones you think will suit you. Here's the link: ruclips.net/video/uk07W2axR38/видео.html
@@vincentryanborres omg! soooooo coooooool ☺☺☺ THANK YOU. I DO SKIPP SEVERAL COOL effects , just because i live in old building with thin walls. and use headphones mostly cus i like to play at 02.30am 🤣🤣 ... the 'noise' hurts in between playing... wow! finally 20+ effects are going to be my new toy 😁. THANK YOU AGAIN for reply! and make last video even better. so glad i clicked and subscribed to yours, cheers buddy!
@@vincentryanborres i got the g1on pedal just for the one effect really, H8 ...🤣 EVERYTHING else that came with it included for same price felt like free extras hihihaha... i love my g1on.. thanks,
ruclips.net/video/TzkQMVvdt9k/видео.html
glad you like it. you're welcome.
I also got this patch which is like shimmer patch. ruclips.net/video/iFlaZwdNPG8/видео.html
Nice vid. I see you have the rubber pieces on the pedal for easy switching . I made the video for that hack . A few years ago.!
Yes, I saw that two years ago. And that's why I subbed to your channel. It was 2018 when I really focused on building my channel. I think the whole year of 2018. thank you so much! Around that time I just kept searching for Zoom G1on and G1xOn users and watched their videos and comment on their channel. Then I do my own thing. And for some reason it worked. On the other hand, the homebased DIY, demo and reviews also worked for me to gain more views and for wider search visibility on the internet. But my subs mostly came from Zoom G1xon.
vincent ryan borres cool. Vincent .... Check out my two g1’s conected together video...
Hello, could you share the Red Indiana hack links here?
Here’s the link: ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=Q_EyvNV11AipEFgC
Fui adiciona novos efeitos e desligou e ela quando liga nao aparece zoom fica tela laranjada
Was the update finished before you turn he unit off? It should finish everything before you turn off or disrupt the process. I don’t know if this will solve it. ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=Dj0iR9Eeu8yqCo5N
Or you can restore the unit to the original settings: ruclips.net/video/uLu_hTjNyig/видео.htmlsi=59Sdgp7T4Jt_DcdS
Nice update. Thanks!
Welcome. Just in case you haven’t seen this yet. Just wanted to share as well. ruclips.net/video/JxnUTLiGGEM/видео.html
i bought a zoom g1xon with a b1xon firmware in it. How can i convert it back to the g1xon firmware? thanks in advance
Have you tried restoring it to factory settings? Im not sure if it will work but here's my video on how to restore Zoom G1xOn to factory settings ruclips.net/video/uLu_hTjNyig/видео.html
If reset to factory setting won't work. Perhaps you can choose this other option where you remove the b1xOn effects and replace it with the Zoom G1xON ones. ruclips.net/video/JxnUTLiGGEM/видео.html
salamat po dito sir vin kung di dahil sa inyo di ko malalaman
Isagani Valenzuela welcome sir. God bless
What type of USB cable you used, sir?
I think it’s USB mini A.
And I got a much better update for this zoom G1xOn. Here’s the link: ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=s_M2LfKXTf-NESWo
In my zoom g1on there is only a screen displaying zoom can this way it can be repaired??
Have you tried restore to factory setting? Here’s the link: ruclips.net/video/uLu_hTjNyig/видео.htmlsi=kJWVEw5sCD0tr8BN
I don’t know if this one will work. ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=pkA6gVMEHL4EkYvf
@@vincentryanborres yes but it doesn't show any sign
@@vincentryanborres is driver need to be downloaded separately for updating?
Yes, link in the description. But this video is long time ago so I don’t know if the link still works. It was only shared to me.
drive.google.com/file/u/0/d/108BOTfEUJIJreEPllZcyKYSqe72QIP3N/view?usp=drivesdk&pli=1
Hello! I tried this on my G1xon and it shows "illegal device connected". Do you have any tips? Thanks!
Try this one instead. This might help: ruclips.net/video/JxnUTLiGGEM/видео.html
hello someone could solve the problem and "legal device"?
Hello Vincent and all people, here is a question to all g1xon users - how does expression pedal work after these updates? Have you tried recently to assign parameters like speed, wave, mix or whatever it was before update? Someone wrote that with update you loose all (or some) the possibilities with pedal (except wah, volume etc) is that true? Can someone check it out? Cheers!!!
Very good question. To be honest I haven’t tried the pedal in terms of assigning effects. But yeah the wah and volume seems working ok as well as the PDlMnpit. Also after I updated it and there were some effects that was removed in favour of the new ones, I immediately posted a second video as sort of a solution. You got the option here to retain all of the effects and settings of your Zoom G1xOn but add or change some effects. Here’s the link: ruclips.net/video/JxnUTLiGGEM/видео.html
Thanks for fast reply!I'm curious as I don't want to change these pedal benefit , thanks for the link, I will think hard if there is chance to keep home effects and options untouched. Regards
@@fretlessfretsff7079 yes with the new link you can leave the effects as it is and just add the ones you like
I did it, some effects are still adjustable with pedal, some are not anymore (like particle reverb mentioned in some comments and others) BUT comparing to what the update brings - it was worth it, thanks again for your help. Stay safe man!
great news. you too keep safe. cheers!
Thanks for the video, but my auto wah effect lose from my menu, can you help me?
Yeah some effects disappear here’s another video I made as a solution: ruclips.net/video/JxnUTLiGGEM/видео.html
Please can you play the demo of these new effects?
Yes, I will do it in my next video. probably this weekend.
where the new effects come from?
I think it's a hack and they just shared online. Lots of my subscribers and friends been asking me about this and I couldn't find it in Zoom website. But then just recently someone gave me a link and I just did it. So far so good.
Plz help me to how to save effect like I need clean and atowha how save near.if I have to go to stage and I need a1 to I9 that is very far sir plz help me to find sir.??
you need to swap patches or save patches. Put your I9 next to A1. Here's the link on how. ruclips.net/video/Q5kuxKko7kg/видео.html
I don't have my auto-wah patch but may be this can help. ruclips.net/video/DPvJvnNBDqU/видео.html
is there any problem installing this update on the normal G1on, without the expression pedal?
This is an old video. I made a second one. It’s more personalised. Here’s the link: ruclips.net/video/JxnUTLiGGEM/видео.html
Thanks Amigo!
@@felipeaugusto8779 welcome amigo.
Can I conect this processor to zoom lab software ??
I haven’t tried it but I think it’s ToneLib that they are using for this zoom G1xOn. And the Zoom G1Four uses GuitarLab which was the one that I managed to try.
Boss pag Naka upgrade na ang g1xon Tapos Ni reset Mo mawawala din ba ang pag kaka upgrade nya
D ko Pa natry pero tingin ko ganun nga magrereset sya to factory setting. Parang kng ano sya nung binili mo.
Si pag nag update ng software.magdadagdag lang po ba ng effects or may mga effects na mwawala from previous software???
Yes sir, bale yung part nang memory card ng pedal mo na maiiba ay yung sa effects part lng. yUng saved patches mo di magagalaw yun. Meron akong bagong update na mas madali na naishare din sa akin. Bale pwede kang magcustomise kng anong effects ang gusto mo ilagay sa unit mo or kng gusto mong same na effects plus additional na gusto mo. Kasi yung nangyari dito sa update na to may mga nawala na effects daw gaya ng Autowah at Z organ, etc. Pero itong bagong share sa akin, nasasayo kng i-retain mo ang original patches ng G1xOn saka dagdagan or totally customise mo sya. Eto yung link: ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres thank you sir
i made the update and lost the noise gate is this downgradable? i really use the noise gate
Oh there was lots of issues on that first update. Here’s our latest update and you are able to customise which effects you want to add or remove. ruclips.net/video/JxnUTLiGGEM/видео.html
thanks, this video help me too much
That's great news. But did you notice there's some effects that they removed. So if you want those back and want to choose your own effects to add and remove, I made another video. Here's the link: ruclips.net/video/JxnUTLiGGEM/видео.html
Idol hindi gumagana yung mini usb port ng g1xon ko.. pano kaya yun?
Nga pala Eto yung updated video ko MAs madali sya ruclips.net/video/JxnUTLiGGEM/видео.html
Hey Vincent...Pls do me a favour....I have installed Shadows patches on my Zoom1xon and I only have the J group as free...can you please give me the settings for Bass guitar, Chorus,and Tremolo....puede ba email? Thanks....Ramon ("Chubble")
Good morning sir. Within the week sir Ramon. Medyo busy pa sa ngayon. All the best! Cheers!
is it possible to modify my g1on to g1xon with this firmware..???
If you mean to update your Zoom G1on, yes you can and here's the link: ruclips.net/video/JxnUTLiGGEM/видео.html But if you mean to make it like Zoom G1xOn. The two of them are already the same in terms of software and effects. The only difference is the Expression pedal or (Wah Pedal).
hello sir ano pong gagawin pag ayaw mo ma scan ng gx1on sa application po
Hello Christian. So sorry sa late reply. D ko pa kasi na-experience yang problema pero I think may mga nagsasabi na baka sa USB cable ang problema minsan. Sensya talaga kng di ako makakatulong. ruclips.net/video/JxnUTLiGGEM/видео.html
Where does the black button come from?
Bought it from eBay. It’s a non slip self adhesive rubber for chairs and tables. Then I just cut it out to shape. So it’s easy for me to switch from Home to Looper to Rhythm
Salamat sir tagal ako naghintay ng update nyan
josiah hinoguin welcome. Bless you!!!
Will the update delete my previous patches ?
It will not delete anything from you unit. It will just add new effects. ruclips.net/video/l9tbBsV2e_U/видео.html
Hello idol im trying to do that but im confuse and worried na baka ma currupt bigla ung zoom pathces q what do you think sir? Kailangan q kaz nyan madaming wala sa zoom q gaya ng arena reverb at metal world
aero Slash parang safe naman sir. If you like kasi Di ko pa natest wait this weekend. Upload ako ng impression ko at sound demo. Saka natin masasabing safe talaga
@@vincentryanborres ginagawa qna nga ngaun idol hehehe ndi na kaz aq kuntento sa patch q lalo na quarantine day everday hangang madaling nag gigitara aq
it is my idea or the auto-wah disappeared?
Hello Tomas, yeah one person also said that there are some effects that disappeared. But I cannot confirm to you because I can't memorise all the effects list but when I opened my personalised patches, they are all seem ok. So, I don't know exactly if there are missing effects.
@@vincentryanborres thank you so much to respond! The newer effects looks so interesting
@@tomasmedina488 Yes Auto wah is gone and it was awesome!
Sir pwede ko b gamitin ung mini usb cable n ginagamit ko sa power bank?
Yes sir. Gagana basta Mini USB.
Salamat po,d ko kasi sure kng 5volts ung mini usb cable dito pero alam ko galing sya s powerbank e
Brother my interface built in ba ang zoom na g1xon
Hello Lodi. So sorry wala syang builtin interface. Yung USB nya serves as power option or to update ng firmware.
@@vincentryanborres un ba. Usb power link na mura lang ok ba un sa g1xon ..
@@lodiboxing7220 yes pwede na sya. Yan lng din gamit ko pero umiinit yung charger ng phone charger na gamit ko kaya bumili na kng ako ng generic 9v. Pero for short jam or recording ok naman ang usb. Saka bumili ako ng rechargeable battery para pag may outdoors na gig walang problema for outlet.
the quality of the effects is good?
Im just about to post a video of the new added effects. Just took me a long time to make the video last night and stayed late for editing but still didn't manage to finish.
@@vincentryanborres thank you so much for respond all my cuestions and share this hack!
Does It reset the existing patches?
It doesn’t but because some of the effects are removed so it might affect some of the patches in some ways. But I got a different video that can avoid it. ruclips.net/video/JxnUTLiGGEM/видео.html
Sir parang may nabawas.. Ung funky duck nandun pa kaso Wlng tunog nyang dati prng duck.. Paano Kya un paborito ko p nman un patch n un.. Help nman sir.. Ni restore ko n nga wla p rin..
Sir nasa Pinned comment yung solution kasi di to sa akin ang modification, pinasa lng tapos nag-update din ako saka pa lng namin napuna na wala yung auto wah. May mga nawala pala na mga effects. Bale dyan sa pinned comments merong solution dyan sir.
@@vincentryanborres Salamat kapatid.. Hinanap ko nlng sa Google ung listahan ng mga efx ng G1xon..
@@vuvoisacodo2603 Yes sir ganun na lng tapos eto yung link ng software. Pwede mong isa isahin yung mga gusto mong effects base na rin dyan sa G1xOn Effects List na nakuha mo sa Google. LINK FOR THE SOFTWARE:
drive.google.com/file/d/108BOTfEUJIJreEPllZcyKYSqe72QIP3N/view?usp=drivesdk
Bro ung akin sinubukan ko to ayaw mascan ung device ng zoom ko sa computer.... Kahit rescan ko walang lumabas pero ready for update lng nakalagay sa computer blangko sya
try mo to sir baka mag-work: ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres natry ko n dun sir ,,MIDI cant open daw sabi ng computer tapos d sya nakaconnect sa zoom ko kc blank lng ung sa execute nya eh
@@gamesforlowendpc9090 di kaya sa USB cable? DI ko pa na-encounter kasi yan. Pero may mga iba akong nakita na comment nila sabi yung USB cable daw minsan ang problema. Hopefully, mahanapan mo ng solution. Di naman din talaga ganun ka-importante tong upgrade kasi di sya official parang hack lng din kasi to na naishare sa akin. Kaya nagustohan ko kasi may mga ibang sounds na magagamit pero in actual fact marami din after nila gamitin tong upgrade nag-request paano ibalik sa original setting kasi yung mga nagawa nila na patches may mga nawala at di gumana. hehehe. God bless!
@@vincentryanborres uhhmm ok sir salamat ,,,stay ko nlng sa ganito bka masira pa saya ,,,matagal ko n kc to n multi effect ung mga unang una pa to n nilabas ng zoom bumili n ko nito kc nahihirapan ako sa ibang multi ito madami gamitin nakakagawa ka ng mga gusto mo nilalagyan ko lng sa labas ng single noise gate kc d kaya ng zoom lng magiingay sya
@@gamesforlowendpc9090 oo maingay talaga tong Zoom Pero up to now gustong gusto ko yung mga effects nya kesa sa Zoom G1Four. Marami akong vids as Zoom G1xOn nasa playlist ko. Baka magustohan mo.
does it work on the g1on zoom ??
I suppose yes sir. Try this new one because you are able to customise your effects. Here's the link: ruclips.net/video/JxnUTLiGGEM/видео.html
Sir parang nawawala ang "autowa" ko???
Sorry bale matagal na kasi tong vid na to. Bale may mga mawawala na effects in replacement sa bago. Pero I posted a solution. Eto yung link: ruclips.net/video/JxnUTLiGGEM/видео.html
g1on?
Yes, you can do this on Zoom G1on.
you can create a firmware update on your own. Customized with pedal that you want.
Here is the link for the firmware editor. It is a java file so no need to install.
drive.google.com/file/d/1-s_zQ3ppbXDcUbd-J5RTlkTBt3IjaWy8/view?usp=drivesdk
Open the firmware of zoom ms50G or zoom ms70CDR using the editor . Choose the effect that you want to add to your g1xon.
Extract - click the pedal that you wnt to add to your g1 then click extract. It will save a ZDL file (this is the file of the pedal.) Then rpeat this step until you selected all the pedals you want. Close the editor.
Then its time to upload it to the zoomg1xon firmware. Open the editor again.
Then chose firmware of g1xon.
Inject .click inject to upload all the ZDL file that you extracted earlier from MS50 or MS70. Click inject to upload the effect to the g1xon firmware.
Then save it as new firmware updater.
Then update your zoom device. Like the one in this video. 😊
Link for firmware of zoom MS50G
(Too mny effect here that was not availble in g1xon) you can extract them all here.
drive.google.com/file/d/1-t4s0LRJsDfFE74syxA4BMyN3EqgkqRf/view?usp=drivesdk
---------------------------------
Link for zoom MS70CDR (chorus delay and rev) same as above. So many effects to extract here.
drive.google.com/file/d/1-vIGv_73GiO6oCbs_T9J909X0O3cfBWG/view?usp=drivesdk
----------------------------------
Link of G1xon firmware (this is the untouched firmware from zoom. You can inject all effect from MS50g or ms70CDR
Here.
drive.google.com/file/d/1-vckB5AGeMJdOxacEVmEBCaeeFgxbUrL/view?usp=drivesdk
----------
LIST OF EFFECT FROM MS50G THAT YOU CAN ADD IN G1XON
drive.google.com/file/d/101446tqtQ97kRayoLaHCHe9JCAjk3CCV/view?usp=drivesdk
LIST OF EFFECT FROM MS70CDR THAT YOU CAN ADD TO G1XON
drive.google.com/file/d/10-Ptth-sKl-B0sTWTu05Ual08LLw8NHS/view?usp=drivesdk
This is awesome. THank you JP. I will try this later.
@@vincentryanborresmy pleasure to help everyone sir.
can you make a tutorial video for it sir.
Again sir this is only for G1on/G1xon. Compatible firmwares pedals to G1xon / G1on are MS50 , MS60, MS 70, B1on, B1xon. .you can get the effect there and add it to G1xon. (ZDL format) ive already uploaded ms 50 and ms 70.
Ms 60 , B1xon is for bass . I havnt downloaded the firmware yet. It is comptible though. if you want to use your g1 for your bass you can download the firmware of b1xon and ms60 in the zoom website.
If you want to modify G1four using the editor, you can get the padals you want from the compatible firmware. firmwares of zoom g3x, zoom g3n, g3xn, g5n, b3n, zoom ac2, zoom ac3, b1four, b1xfor models. They use ZD2 format.. you can download it in the zoom webssite.
@JP sir pagka click ko dun sa java file ang sabe "how do you want to openthis file"
Can you add or replace g1 four effects? It is posible?
I mean g1 four effects in g1xon. It's possible?
cant update because its say illegal device?please help
Try on more options or other options. Just click it then it will show after.
Do i need the effect manager to do that or just need the software in the link you shared?I tried to do with the effectmanager but lost my patches.I see the names of my patches but if i click on the effects it says its empty.Please what do Im wrong sir.Can u help me, Thank you .
Wow thanks man!
wish we could also update drum patterns and drum sound in it ...
welcome. Yeah it would be great isnt it. But even with the G1Four and G1xFour they just used the same drum patterns. Exactly the same.
@@vincentryanborres yes i watched your video on it
does this update qork for Zoom g1on also?
Nice video Vincent. . Do you know if i can get b1xon effects on my G1XON?
I haven’t tried but I think you can. Here’s my other video where you can select which effects you want for your Zoom G1xOn. ruclips.net/video/JxnUTLiGGEM/видео.html
Sir san nakakabili ng parang rubber para sa mga selector??
Sa eBay ko nabili Pero baka meron nyan da mga hardware shop o sa Lazada. Search for self adhesive non slip rubber.
Thank sir vince
@@wesleyroxas7567 welcome! Glad to help!!
Hi Sir. Pwede kaya to para sa G3X?
Parang para lng ata to sa G1, G1x, B1, B1x saka ang MS-CDR
Thanks for all the videos, I have some files for a stomp box mod for the g1xon I think you might like.
thank you so much! At the moment, I am more into the classical guitar. But thank you for the offer. Cheers!
is it applicable for G1on?
Yes it is applicable. Also I got an update to this video: ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres Thanks a lot..❤️
@@sadatafnanswad6881 you're welcome
Is it only for g1xon
Not yet sure. But from what I gather, they are sharing this for Zoom G1On and G1xOn user for now.
Thanks
You might want this update where you can pick and choose which effects you want to add and remove: ruclips.net/video/JxnUTLiGGEM/видео.html
Nice 1 po sir naupdate ninyu narin po ung sa inyu sir ung saaken ung inupdate ko ang nangyare ung ilan sa mga patch ko date napansin ko nakalagay missing pili lng naman po kaya ang gnawa ko sa mga missing patch ko denilate ko nalang po
Yes sir finally, hehehe. Salamat sa info. Tapos di ko pa na-try actually. Kaya di ko alam kong may mga missing patches ako. Bale nag-check lng ako ng mabilisan kasi gabi ko to ginawa tapos natagalan ako sa video editing. Hanggang 2 am ata ako natapos. Kaya umaga ko na inaupload ang video. Check ko to mamya at try ko yung new effects.
@@vincentryanborres haha napuyat s pagedit ng video c sir... Sir if kaya po ninyung gawan ng sulusyon ung ilan sa mga missing patch paturo po salamat...
Sir is the official update??
I don't think it's official sir. Because lots of my friends and subscribers has been asking me about it and I searched on the internet but I couldn't find it. Not until someone left me a link and that's when I tried it. And Im amazed. It worked. Got new additional effects and my patches are still there. So yeah. totally awesome. I will post video next time to test these new effects.
vincent ryan borres yaa I want to see these new effects sir
@@nitesh_narayan You can download it from ruclips.net/video/l9tbBsV2e_U/видео.html
I think this is not official becuase its modified and not release in the zoom official, site.. Anyway it does the work..
@@ericsoncarino6831 exactly what I said sir.
Bisakah untuk G1on?
Yes, but I got a new video and it’s much better ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=0z9diRWKfMdtHSMT
what are the risks?
So far, didn't really find the risks. Just copied or downloaded and installed it.
pwede marinig yong mga bagong update update na efx
Merliza Acera eto yung sound test ruclips.net/video/LgAjIaUd7vg/видео.html
Wow sir meron nrin po kya sa G1X FOUR
Hello sir, it was only shared sa akin by one of my subscribers and I think para pa lng to sa G1On/G1xOn parang hack sya or modification, di sya official update.
Pwde b to sa G1on?
Pwede sya pero may mga nabubura kasi na effects kaya yung iba d gusto netong update. Meron akong another video where pwede kng pumili kng alin lng na effects yung idadagdag mo eto ang link: ruclips.net/video/uk07W2axR38/видео.html
zoom g1on???
Yes it can but here’s my more updated version where you can choose your own effects to add on your zoom g1on ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=fBNJE0vUA-89lgiv
pwede rin ba to sa G1ON
Pwede din. Tapos Eto yung updated version MAs madali sya at makakapili ka ng gusto mong idagdag na effects ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres ayos!! Your the BEST!!!
@@vincentryanborres just incase gusto ko ibalik sa dati
either restore to factory settings ka or search mo lahat ng effects na nakalagay Zoom G1On yun i-copy mo tapos delete the rest pwede din yun.
Nice hehehe new effects
And here’s my other video on how to edit or update the effects pedal. ruclips.net/video/JxnUTLiGGEM/видео.html
So i'm back Vincent ,the Zoom works perfectly well since i wrote to you ....I don't know what happened ...
that's good to hear. I was at work earlier. Didn't get the chance to reply to you immediately. Try and find an improvised case for your Zoom to protect from dust.
@@vincentryanborres Thanks a lot Vincent , i understand that if you were working it wasn't easy to reply , in fact thank you to simply reply ...I will try to protect it from dust from now on , at least covering it with somethig ...It was funny to see it working right after having written to you , once you go in the settings you can find some real good sounds with it , i hope it will last ,and us too ..^^ ! Take care amigo ....
@@sirzembla4512 that’s really great news. By the way I got lots of tutorials on this pedal. You might want to check out. ruclips.net/p/PLBxYCa_SF0sOlPncD-_u1usqCfOE-pD2z
@@vincentryanborres Thank you Vincent , i was charging my phone excuse me ,i use it as modem ,the walls are thick here...
I'll see that tomorrow if God Wants ,thanks a lot for your kindness ...
@@sirzembla4512 no worries at all. Stay safe always!!!
Ayaw basahin sakin naka windows 7 ako d mabasa zoom ko
Bale na-share lng din sa akin to kaya d ko rin alam ang specs talaga pero yung gamit ko nung nag update ako ay Windows 10. Sayang.
Try mo kaya to. Baka gumana. ruclips.net/video/JxnUTLiGGEM/видео.html
Baka sa cable siguro
Ano disadvantage nito sir?
Bale may mga na-omit na effects to accommodate the new ones. Pero may solution naman. ruclips.net/video/JxnUTLiGGEM/видео.html
@@vincentryanborres thankyou,,pero ang ganda ng naidagdag
welcome! lalo sa reverb, delays at overdrive yun yung tatlo na nag-enjoy ako idagdag. kasi ang daming pagpipilian.
ill try this and let you know how it goes
Yes please.
you can download the update from him. it's on the description ruclips.net/video/l9tbBsV2e_U/видео.html
My G1Xon has been updated so awesome.
Leon Banks cool stuff. Happy for you!
En español no hay? xd
Sorry I don’t speak Spanish. There are similar words in my dialect especially when I count like uno dos tres quatro cinco but not fluent with Spanish. By the way this might help. ruclips.net/video/JxnUTLiGGEM/видео.html
I hear you say you have a G1Four? I got a Four X - been working on reverse engineering the MIDI commands for it - ruclips.net/video/B5W7c5dEVmI/видео.html
If you know of any please let me know.
So far I can change the patches, grab data for FX and patches plus modify FX's / Params. I need to set bounds for the various effects.
Actually I think this G1 On has particle reverb which the G1Four doesn't have. I think the G1on is definitely more powerful than the G1 Four.
Hello Stephen, I've checked your video. It's beyond my capacity. But I enjoyed it. Had a bit of hard time with the computer language. hehehe. But yeah its very interesting. Thank you so much for sharing it.
@@vincentryanborres if there are any folks here with a Zoom pedal and a Windows box, Rapberry Pi or Linux (ok i can show some love for Mac too :-)) and they want to explore external control of the Zoom G/B maybe A pedal series please check out my video and let's see if we can collaborate.
All I am doing is sitting in the middle of the conversation between the software (GuitarLab) and the Zoom unit.
It seems it talks standard midi - so my aim is to work out and document the SysEx strings that allow you to modified the patch parameters in real time either with some off the shelf midi gear (to be determined) or make our own with Pi, Arduino or ESP (which opens up bluetooth possibilities).
I want to make music - but I love tinkering with control surfaces - and what we are uncovering here could be programmed from Steinberg Cubase, Logic, Reaper possibly even Abelton etc etc.
Thanks for listening.
Idol hindi gumagana yung mini usb port ng g1xon ko.. pano kaya yun?
Baka sa cable mo yan. Hiram ka or bumili ka ng cable
Does ir work on g1on?
Yes it does and here’s the most recent one. ruclips.net/video/JxnUTLiGGEM/видео.htmlsi=ogqzifYJMUM1yWfJ
@@vincentryanborres already did it, thanks for the tutorial btw!
You’re welcome!
By the way, can I share to you my recently released album? Here’s the playlist: ruclips.net/p/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0&si=rblwnXeCnw5xJfP9