DIY High Performance Ring-Pull Ignition System
HTML-код
- Опубликовано: 14 июн 2024
- I make kits for everything needed to build pull-ring igniters. Order from www.inventionincarnate.com. They are $40 for 50 igniters.
Instructions for making a high performance pull ring ignition system for smoke grenades.
Click here to view more similar content and subscribe: / @inventionincarnate
For an updated, and comprehensive guide to make the best device I’ve created (Terephthalic Acid VASTLY IMPROVED • TPA Smoke Device, Blow... ) check out this series: High Performance Smoke Devices| Volume 1: Ignitions
• Building High Performa...
00:00 The Silly Peasant Ignition Systems Out There On the Inter Web
00:29 Intro
01:16 Examples
02:30 Starting the Build
04:43 Threading The Ignition Cups
08:05 I Love Saying "Ignition Composition"
13:03 Assembling The Igniter
21:29 The Ring-Pull
24:14 Installing The Igniter
34:13 THICCQUEEN JUICY DUMPER TIME- rachelelizabethx0
34:19 Making it look gangsta
35:04 Letter from ATF
***By popular demand: here’s the link to the STHF True Homemade Version from readily available materials: • SHTF Ignition Cups for...
If you haven't seen the Part 1 video on how to make the High Performance Tactical Smoke Grenades here's that link: • DIY High Performance S...
It took me about 6 months of trial and error and 30 different prototypes to come up with this compact and simple device. As far as I can tell, it's the best DIY ignition system out there. As I come up with new ideas I will post them.
If you want to add a safety measure to prevent accidental ignition, that can be done by either:
- (simply) with a piece of tape holding down pull ring to the side of the canister
- (complicatedly) by crimping a ribbon crimp (wal mart crafts dept) to the pull line, then running a hitch pin, or a thin cotter pin through the ribbon crimp loop and top of the canister. honestly, that way sucks because it is complicated and difficult to execute without severing the ripcord.
- another way is to simply fold over the pin cord and zip-tie it to the top of canister, if the zip tie is thick you can partly sever with toenail clippers.
I decided to make my own igniter kits, they are also $20 cheaper. Go to inventionincarnate.com.
ATF Memo Link: www.atf.gov/explosives/docs/o...
subscribe to see our field test of 6 of these bad boys.
Also, I'll be shifting my focus to tweaking the formula with titanium dioxide and also exploring colored formulations. I won't put those videos until I have them perfected.
#diy#airsoft #paintball #smokebombs #smokegrenade #fireworks #homemade #survival - Хобби
*SUGGESTION: Play around with a small amount of BAKING SODA in your smoke composition.* It cools the smoke which makes it hang lower to the ground. Obviously too much would slow the burn too much...so 'play around with it' to find the right dose.
Baking soda is the bee's knees in smoke 🙂
@@jamesridge7982what does that mean?
@dragosdiaconu629 it's really good
Calcium bicarbonate works for this too but sodium bicarbonate is easier to find
@user-bk9ig7hb4r you should post your version! I'd love to see how it turned out
Your kit is actually pretty easy to put together and your after care is even better. Thanks for everything!
Standby one
Copy and paste/ screenshot this comment then Email me at InventionIncarnate@gmail.com
@@InventionIncarnate done!
Former Marine here, i have liked and subscribed.
Once a marine always a marine. Semper Fi
@@joeabad5908 Yes sir, Semper Fi
I'm gonna be heated the minute someone tries to take this channel down. It might be worth considering an alternative method to get information out to a community just in case because "people" hate fun. This is golden information that needs to be shared. Great work on everything
Odysee
@@DaveSmith-cp5kj peertube, if you want to be fully independent
I actually videoed this and have a video of the video on my phone, because YT will most likely go nuts.
Odysee or Rumble. Be immortalized on those platforms.
@@andreongoogle958 Which is a double edged sword of course. While its great Odysee doesn't censor, it's also bad in anything you upload there, even a comment is absolutely permanent and not even the Odysee staff can remove it, only hide it if you request it. Anyone however can pull the data off their blockchain though.
This also means if you fear gov prosecution you are best using a volatile service instead like russian file sharing websites (often used to share anime pr0n, lol), but if you want to put whistleblower stuff it's great. Odysee of course is compliant with government agencies so don't be surprised if they give the feds your meta data. They are anti-censorship, not pro-privacy.
I'm only 2 mins in man is this video is freaking amazing. WOW. Thank you for the time you put into this and the knowledge.
No, thank YOU for the comment!
I. Notice every single person. Is telling you how to do it better lol but most have never tried or built one lmao . They should make their own vids. If they are experts . Anyways. Thanks for the. Video of a bulletproof way to do this . I think you have found. The best way
Marine heat shrink usually has some kind of thermal adhesive inside. When you heat up the tubing to shrink it, the glue liquefies during the shrinking process, filling and sealing any void. Great videos. I'm definitely going to try these out.
Just those alone would be perfect for getting a fire started in an emergency situation.
Bro you’re incredibly smart. You’re like a relatable chemist. Someone you can actually understand. Great videos bro. I barely sub but you got it.
I appreciate that!
0:32 I love the text here. It reminds me of Vine-Glo and gives the feeling of "Definitely do NOT use this fuse for any kinds of explosives! Do not use this to put inside of any kind of pipe bomb!"
Dude... this is awesome.
Keep up the great work, and your channel will definitely grow.
Definitely subscribed.
Thank you
Look up Boba Straws. You can use it as a sleeve. You can add the ignition inside it. And then put them both into the mixer. Once you added the plaster mix on top and it’s ready for the cover. Just pull the straw out and the ignition piece will still be inside.
You can also use the straws to make the baffles holes when pour.
Good idea, I’ll try that
Very nice. It is so important that we explain how it works for everyone else safety. Keep up the good work and stay safe.
The algorithms randomly recomended your channel to me, I am now subscribed! Thank you for your thourough explanations, these were super interesting to watch. Looking forward to future uploads!!
I've had a pest problem and these ideas will help in their intrusion. Keep up the good work and thank you for all your dedication to making educational videos.
You sir are a madman,love it!
Finished making all the fuses that the kit can make. Spot on 50 fuses. Buying these kits are by far the cheapest and easy way to get started. Biggest thing to take way is give it time to dry. It’s easy to get rolling and think you can do it all in a day. You will mess up a few like I did lol
Awesome 😎 thank you
Nice. The best pull igniters i have seen. Well done. Thanks for the info. Cheers
I kinda see coming the "We Love The Composition" Merch, keep the videos coming man good work
Omg! Imma make that shirt!
lol. the intro is great, but this is actually the very first video I watch on this topic. Came here from the smoke bomb video that the algo recommended to me :) Keep up the great stuff!
It's basically diy matches :)
Wow, you have a lot of time available. Great video.
I’m def on the list after this video. Subscribed
Those marine heat shrink tubes have silicone in them that will turn to liquid with high heat and solidify once cooled. Well pump splice kits have the same heat shrinks
baking soda and superglue (cyanoacrylate) makes extremely tough bonding agent, very useful for creating custom hard seals for whatever, repairing/resurfacing certain type of objects, substituting long epoxy cure times in non-critical applications...
Sprinkle some soda where this cement-like material is needed then slowly drip in superglue - as in as small of a drop possible at a time - and then lightly sprinkle the wet and hardening compound with more soda to use up any extra cyanoacrylate and then wipe/blow off excess soda.
This will give off a fair amount of heat but nothing dangerous i think.
Got this from a Luthier who used to work on famous violins for some of the best in the art - he used to repair bone nuts on lower grade instruments or when time didn't allow for a proper repair. He got forced out of his own trade, even if he most likely was the best in thousands of miles radius, by over increasing cost of buying insurance to allow him to work on some priceless violins and other stringed pieces of junk.
Found you tonight…outstanding content! Keep it up! Earning a sub.
Great stuff! You have a new subscriber! Thanks for the BATF info as well!
Appreciate the ATFers information.
Nice video gonna definitely buy the kit. I'm looking forward to more videos.
Interesting article i will have to have a look at making one or two of these smoke grenades.
What a cool idea! Thanks for sharing this!
Go Algo!
Go Algo Go! Thanks
Excellent demonstration video. This 'Screen Obscurant Device' may come in handy this year...just saying.
Thanks for the how to. BTW, since you're just crimping on the pull ring, just leave it off till the very end so it makes final assembly much easier, I.E. won't have to fight the cap to put in the plaster.
Amen to that! Thank you
Great tutorial! Looking fwd to seeing your how to DIY the "striker" & "igniter" compounds! Also would love to see a build video the delayed fuse igniters you mentioned at the start of this video.
I tested out four homemade ignition systems, only 1 worked reliably, will post soon
I'm definitely on a list watching this kind of stuff lmao.
Great video
I'm an avid outdoorsman and over many years of using different brands of storm matches I have found UCO brand the best and cheapest. Zippo makes very good ones but UCOs burn a little longer and are just as reliable if not moreso at about half the price. The "gooey stuff" inside the heatshrink tubing is hot melt glue. They put it in ones for marine and electrical usage to help with adhesion and waterproofing and are usually more expensive that those without it.
Interesting info.
Awesome series
Excellent content, man. Love the channel.
Thank you
I wish the kits were in stock.
Great content thanks for sharing!
Hot stuff! This is really cool! Thank you for sharing.
I just reload standard smoke pull-pin fuse units. From there you can use triple protected 1/4' firework fuse.
Pull poppers work great.
No they don’t, have you actually tried?
@@InventionIncarnate yes. But I am remembering doing this in the 80s, and they were firecrackers almost, with a string out of both ends. They were noise alarms.
Yep. They were 'burglar alarms'.
Nice work. 👍
Thank you
Great video, looking forward to more👍👍👍
More to come!
Subbed. This channel is great.
Masterpiece! Subscribed!
Much appreciated!
Fuking awesome wow loved it and the ATF is just too crazy and outta their minds sorry for the knowledge didnt know that feeding the mind was wrong
Great vids brother
Cool and terrifying at the same time, please predrill all components before assembly!
And use straws to mold the vent tubes.
Nice work
A friend of mine recently sent me some red phosphorus, and I just made a few pounds of potassium chlorate. I'm going to have to try this. I don't have any antimony trisulfide but I'm sure I can extract some from the box of match books I have. These look great!
Love the video!
great video
Thanks!
Great job, please try to make colored smoke by mixing the composition with crayon, it is going to colorful and fun.
Good job buddy very cool
It's the chlorate in the match heads that reacts with the red phosphorous by the way. Any composition with Chlorate is very sensitive/reactive. Especially to phosphorous. That's why they mainly switched to perchlorate for most uses, except certain colored mixtures. But it's reactive properties are useful in the case of matches.
Good to see you didn't use the tongue depressor... I prefer my tongue nice and happy too. x'D
Very interesting!
Bravo.thenks
Thank you
These actually works..
Thank you.
You're welcome!
I hit like for ya. You're just doing science projects stuff
A red coffee stir straw would work in place to slide over the string. An if it got hotter there’s none of the glue in it to bind the string as the shrink wrap will.
An I’m sure you can get the shrink wrap without the hot snot in it also
Great
Woo hoo engagement!!!
Engage engage
You should try some of the airsoft m18 grenade bb holders. Convert them to be real smokes. I’ve done it with a couple of em and the bottoms unscrew so you can easily reload them
Red phosphorus and potassium chlorate are very recative and main reaction agents in matches.
It's funny when you lit that second fuse in the Vise, I could smell it! I really could smell like matches, that kind of smell. Lol
Awesome
Dope
Awesome content man. Would love to know more about what you used for the delay fuse composition
Coming soon!
Suggestion:
You could use the outer lid on the tea canister as a transportation safety
Btw, the reaction going on during ignition is red phosphorus reacting with potassium chlorate using antimony trisulfide and sulfur as the fuel.
I hope you do flash bangs soon
I really appreciate this video. Which size tiki torch canisters are you using. Can you post a vid on the slow burn ones from the first part of the video
Ohhhhh yea..... Lets Go!
Great video! Subscribed im prob on a list anyway lol
Lol
Cool video this can f research is hard to find quality like this.
Comment for the algorithm 😁👍
comment for the algorithm. To the moon brother. Thanks for the info.
Thank You!!!
im a contractor so i have alot of random tools...5 minutes later.... use a heat gun if you got one im using a lighter cause i dont 🤣🤣🤣 that got me
Hmm, I like the vent holes but what I was thinking of doing is making the composition in a paper 3d then putting the paper tube with holes on both sides then putting the tube inside of a 3d printed tube with two end caps, the top one will have 3 baffle holes and the bottom end cap will have 1 bigger one (copy of the M18 smoke) but its not directly being venting from the mix, it's getting extruded through one big hole on both sides but that as it fills up the end caps it will then get filtered through the 3 baffle holes, do you think this is fine or should the three baffle holes be drilled directly into the composition, I'm using KNO3, Sugar and Wax, not sure about what you're using but what do you think of this design I've specified
Sweet video and tutorial per'se. I wonder if you could experiment with ground up match heads and glue to make an ignition stick. I mean the diy way of course. Subbed!👍🇺🇸
Haha that’s crazy, just made that video, ruclips.net/video/gii1Osxk5IE/видео.htmlsi=PeTc-15Ws3n16Q0q
making public tonight.
Sounds like how a strike anywhere match is made.
The Art of Building High Performance Smoke Devices| Volume 1: Ignition
ruclips.net/video/gxFxfkqzKWY/видео.html
It would br interesting to see how the compound burns in a free state outside of any containment.
Well buying a kit is not quite the same as invention but oh well. Thanx just the same because I did get a few ideas from watching this.
here's from scratch ingredients: ruclips.net/video/gxFxfkqzKWY/видео.htmlsi=aEjTV89ydFthxPrk
Have you tried making any of the colored smoke with the solvent dyes?
I believe on the Tea Canister build I wouldn't have drilled the cap and just folded the ignition down and put the cap on covering the ignition to prevent accidental pull and having a clean storage container. When deployed just pop the top pull the ignition and throw it out ther.
You can use matches to make your own ignition composition, especially if you use the string and cap method with the pva glue
It’s all in a kit . Prob easier and more cost effective the way he is doing it
@nickcole4517 probably so buy its the same stuff on the matches thats in the kit just separated
Cool!!
go look in the fishing section of a outdoors store for leader making supplies. you want the leader crimps. they come in various sizes for wire / nylon leaders. at the drill baffle holes. how would using short pieces of plastic straw work to avoid this step. ''''place the straw pieces in the compound after loading an before adding baffle material so the baffle material flows around the straws sealing without having to drill.
I think you’d have a much easier time with final assembly of the smoke canister if you leave crimping the pull ring for very last
Former MOS 13F/B ... US ARMY air assault .... This is time on target 🎯
Cool
Red striker comp, strike anywhere red matches ground into a fine powder, the green matche ones do not work)
So when is YOUR full uncensored How to dvd coming out!?
Todays smoke grenades dosent have an ignition system!
Its only mixes 2 liquids water and a titan mixture that gives
thichest long lasting non toxic smoke. But i still think making it from
schratch is more fun instead use a kit!
This was awesome but how about the delayed one pls make a video to how to make delayed ring pull ignition
You're dope