Epson XP-15000 DTF Conversion: EPIC FAIL!!! Don't Make This Mistake
HTML-код
- Опубликовано: 21 авг 2024
- Routine XP15000 DTF Conversion gone wrong.
Chipless Firmware
INKCHIP Solution For Chipless Printing
Web page: inkchip.net
10% DISCOUNT CUPON CODE: GORILLA
Tel.:+372 8130 4009
Email: info@inkchip.net
Whatsapp: +372 8130 4009
WeChat ID: inkchipnet
Link to download software: inkchip.net/soft/
Canal RUclips: / @inkchipofficial
Thank you I will give it a try!
I have a xp 15000 I just bought an converted an set up software now when I print it's like the ink is printing to much ink my prints are dripping ink
what ciss conversion kit are you using? provide your affialiate link please! I am all for the white stirring itself.
Do you have a video on converting a used xp-15000 printer? I purchased it new but used it for regular printing.. I have only use the required ink.
Would not be any different
Is it mandatory to have the cartridges with a chip inserted in the head to be able to install the firemware? one of my cartridges no longer has ink. Can the firemware still be installed?
You might have to start the printer in FW update mode and install it that way.
Bonjour, la vidéo est très détaillées, merci. Mais j'ai un problème avec la mise a jour du micrologiciel, la mise a jours ne s'effectue pas. Peut tu m'aider ?
What does the chipless firmware do for you? Also, do you need CadLInk software to assign ink colors to appropriate tanks like the guy on Highly Flavored sells?
Most printer ink tanks have chips, so when the ink is low you can’t just refill them. The firmware makes it so you can bypass that and not have to keep buying ink tanks. You will have your monitor ink levels manually and buy refill bottles and syringes to refill
Took off the chips from the original cartridges but I got them mixed up I put em on the new cartridges with the dtf ink but the printer keeps givin me maintenance error
I converted my Epson 1500 but i can't get good quality on my prints it all pixels no solid colors can you help pls
I’m having issues with getting ink to print. Chipless is telling me to revert back to original software. Can I just do the update then reinstall the chipless?
If you have cartridges in. Make sure that the vent plug is removed. Never print with both holes filled. It will create a vacuum and ink will not flow through the head. You can actually damage it that way. But if you want to re install the firmware, just update via the firmware menu on the printer and then re install. Make sure you copy your recovery code, or make sure you keep your activation code so you don’t have to re purchase.
Just bought an epson xp15000. I converted it and added the dtf ink. Tried too print and it barely has an image on the transfer sheet. Like a transparent image. Im stuck. Cant figure out what im doing wrong
did you figure it out? im about to get one but wanna know what im getting myslef into
Are you printing on the right side of the paper ? :)
Just bought one my self what was the issue?@@calmingwhitenoise5707
XP15000 vs ET8550? Which do you works best and have a better resolution with DTF ink?
They are both pretty good. In my opinion, the 8550 was a little easier to work with once I added the ciss.
So now I cant even do initial installation setup because it keeps saying the cartridges are on incorrectly can u please help?
To convert for sublimation do I need red and grey ink? Or can i supplement those spots with other colors if so what colors are needed?
You only need 4 colors and put cleaning solution in the other two cartridges
You fill the red and grey with white.....it will put a white layer on the back of design so it will stand out on dark colors and cotton clothing
Did you just leave the CSIC board out? I've watched this video a few times and don't see it being reinstalled anywhere/.
Relocated to behind the front panel
Hi I wasn’t sure how to contact you but we transfer our Epson XP 15,000 in to dtf but when heating on the shirt, it is very dark. The colors are not coming out. Do you have any suggestions?
Make sure you are using dtf powder after you print.
i forget to boot my printer before converting for the first now am getting error 034011.
Do u just take some stuff apart to do DTF?
XP15000 vs ET8550? Which do you prefer?
They are both pretty good. The only issues I have are issues i caused myself. You really can’t go wrong with either imo
Material list for conversion please?
Where do I get the silicone
Any idea when the conversion kit will be back in stock ???
No. I’ve been out of stock since last year. I can’t compete with Amazon prices at the moment. Might just carry the ciss and cartridges in the summer and discontinue the ink . ☹️
Where i can buy the box without of liquid dtf ?
what paper settings for dtf sheet
Went ahead and waterproofed the printhead and put it all back together to align the printhead and when I turned the printer on I get error 033007. Anyone else get that?
Ok it’s fixed. I did not connect the csic chip back on😂
When i get to the area of installing the firmware, the USB is not showing. What should I do in this case?
Try deleting all printers and drivers. Restart your pc. Then only install the xp15000 driver and start over with the chipless install. Sometimes that will fix the issue.
@@McZell Is there a way to install without the cord? This printer has the old USB port extension that's not as popular so just wondering is there a wifi work around
How is the printer did it stop working?
Yeah it has silicone in the print head. It never worked itself out.
It Appears That A DTF Conversion Runs A Who!e $1,000.00 In Additionak.Costs Above The Purchase Price Of The Printer.... Is That The Lowest Average Startup Investment?
the conversion is almost free?