2011-2019 Dodge Charger 3.6L V6 SR Performance Cold Air Intake Review & Install
HTML-код
- Опубликовано: 5 июн 2024
- An SR Performance Cold Air Intake is a great way to improve the power and performance of your 3.6L Pentastar V6 Charger. By replacing your Charger's restrictive factory intake with a high flow filter assembly you will see and feel a noticeable increase in rear wheel horsepower and torque. This SR Performance Intake not only improves airflow for an increase in power, but it will also add a show winning appearance to the engine bay with its brightly polished aluminum intake tube.
No Tune Required. SR Performance engineered their Cold Air Intake to improve the performance of your V6 Charger without the need of reprogramming your computer. By utilizing flow dynamics, this Intake will increase power using the original factory tune. Even though a re-tune is not required for operation, AmericanMuscle recommends a custom tune to reprogram the vehicles computer (ECU) to get the best possible performance from this Cold Air Intake.
Reusable Air Filter. The included high flow air filter effectively filters out power robbing particles with its multi layer design. The specially treated media creates a sticky surface to capture microscopic contaminants before they can enter your Charger's engine and do harm. Seeing that the filter is reusable there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.
Simple Bolt-on Installation. SR Performance designed their Cold Air Intake kit to be a direct bolt-on replacement. With no special tools or extra modifications required installation can be completed in under an hour. All parts and detailed instructions are included.
Not CARB Certified. This SR Performance Cold Air Intake is not CARB certified, therefore it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.
Application. This SR Performance Polished Cold Air Intake Systemfits 2011-2019 3.6L Dodge Charger models. muscle.am/3mxeDv7
0:00 - Review
3:07 - Tools Needed
3:20 - Install
Item CR3312
----------------------------------------------------------------
Follow AmericanMuscle for all the latest Challenger and Charger Content:
Subscribe for Daily Mopar Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger or Charger: muscle.am/2ztDN5R - Авто/Мото
Shop this SR Performance Cold Air Intake! : muscle.am/3mxeDv7
I'm buying this exact part, thank you for the video
I just installed the newer version of this product. Great video easy to install and great improvement on response, sound is awesome, and a few ponies too. Worth every cent.
Thanks for watching! -Zach
What a cool guy. Much appreciated
I have one on my 2018 challenger and was surprised at the difference it made. It was very noticeable regarding the increase in torque, throttle response and the sound of the exhaust got better too.
The 3.6L V6s definitely love a good cold air intake! Jeeps with the 3.6L get the same result regularly! -Zach
Did you have a problem with the filter coming off?
@@solomonwilliams4072 where you able to fix it?
@@cristianarias-mq3zb Yea double check if you put it together right and then get sand paper and lightly rub it against the rubber part. Not the filter rubber part. Then make sure everything is tightened up. You should be good after that. Haven't had a problem since.
Thanks for the video! Lookin' in the rear view now almost 1 year, what would you recommend for a 2022 Charger GT (v6) owner when it comes to cold-air intakes? I love the look of this one and just don't see nearly enough in the way of performance or sound comparisons on the Internet. Let us know and thanks again for the video!
The afe momentum enclosed cai is the best for the 3.6l charger challenger most expensive aswell or you can swap out the stock airbox for the hellcat one those are the options I'm looking at and this cai aswell as it's very budget friendly but also makes me Leary
Thanks for a great video! Will this unit work with the 2022 Dodge Charger GT, and - is there a new unit/another option that's come out in the time since you'd made this one that would now be the recommendation to use? I really like the look of this one compared to all others but wanted to make sure that I wasn't missing some shiny(er) new hotness. Thanks again for your video! I appreciate it!
It definitely will fit a 2022! At the time of filming and loading this video to RUclips we just didn't have the fitment data to confirm that yet. Thanks for watching! -Zach
Where is the direction of the air intake sensor when installing the Antique Sport?
Is there another option for the filter instead and how do we clean it
If I put this kit on my 2020 v6 charger, will I need to get the engine tuned after? Is this going to interfere with the performance monitor applications and/or cause an engine light to come on?
no
Would this fit on a 2021 dodge charger gt v6
Does these cold air intakes make your engine light come on?
nope
Would this require a tune up?
Edit: NVM read the description and got my answer. GREAT VIDEO . Thank you
Thanks for watching! -Zach
I got a 2021 charger gt and I bought this intake but the problem that I’m having is that my breather hose is on the left side of the engine and also on the sensor part mine is like a plug in play it’s only the sensor that I took out from the old intake and on the old intake it doesn’t have a sensor end or part to take off any help?
Same
Did y’all ever find a solution? & did it cause your check engine light to come on? I was going to order one for my 2015 Dodge Charger SE…
@@toughguy6604 I did find a solution I basically had to relocate it but it was easy I just ran my hand against the hose till I got to the backs where it was connected and it was pretty easy it just popped off when I pulled shouldn’t be any screws.
Did ur check engine light come on? I just ordered one for my 2019 Dodge Charger sxt
Haven’t got it yet it should be at my doorstep in 3 days
Was looking to purchase this but You guys don't sell this intake anymore
Same but buy a k&N cold air intake
@@CallMeeDaddIs the K&N one better?
Would a cold air intake make my 2020 charger gt sound better with super 10 exhaust
It’s not gonna do anything for the exhaust sound.
@@bryce_alot_skate1859 yes it does as the airflow is better.
Lmao from a person that has the same cold air intake. No it doesn’t..
@@bryce_alot_skate1859 sorry but mine sounds different
Can The Filter be Wash, Rinsed and Dried ?
Yes it can! -Zach
Is this the same install for a 2021 Charger SXT?
yes
How much hp does this add potentially. I know its not much but i want to see number
about 15
I don't even know that there should be in increase in actual HP rather than it being a stellar step up look-wise. The one that's in there, is only a step above the trash can lid that's on top of the engine. Of the very few missteps I would consider with all of the lower end (even my R/T) engines in general - the lack of creativity and then aftermarket options beyond say, striping and painting is mystifying to me. I would have loved for there to be something more impactful looking from the factory to start with.
Hi everyone , what is the diameter of the air intake ?
What is it
I don't get it? Why is an open air filter exposed to under hood temperatures called a cold air intake? The original air filter assembly is a true cold air intake because it's a sealed box with the air inlet down low and behind the front bumper where it's colder. The aftermarket intake pick ups air up high in the engine compartment where the heat is.
The stock one restricts airflow, less air gets into the engine and through the exhaust so it's hotter. Aftermarket intakes are designed to increase airflow.
you said it's for 2011-2019 charger but it's doesn't work on 2022 model ? sorry for my english
This Cold Air Intake will fit 11-23 3.6L V6 Chargers! -Zach
My filter keeps coming off!
Bro me too😭 I’m looking at these comments and these guys got nothing
My filet just falls off can I have some jelp
Help
Feel free to give us a call and we'll try to help out! 1-877-887-1105 -Zach
No matter how hard I tighten it my filter keeps falling off please help
I used duck tape too help hold mine on.
How you do it just bought it and it does the same
I've seen people recommending to lightly sand where the filter connects to the intake so that it has more grip
@@deadthybug4646 hey sand it with what grit? Do you know?
@dedseckOS I imagine 80 would do the trick. If not, go down to 40-60 grit!
Edit: 120 grit might work too, but I'd jump straight down to 80 to make sure.
No matter how much you tighten the band clamp for the filter it still falls off
Did you find a solution ?
Bro sameeeeeeeee
I knew I wasn’t the only one but try loosening the clamp on the other side of the heat shield and that will let go of the whole filter then hold the filter and the band together as you tighten it then reassemble it it worked for me FOR NOW
@@johnnybrackins5447 that’s what I did today let’s how long it will last 😂
@@johnnybrackins5447 I've seen a fair amount of people recommending to lightly sand where the filter goes in so that it grips better, they've said when they do this they never had a single issue, idk how true it is but it might be worth a try
I have been lied to by American Muscle for the last time. I've been sent bad parts paid for 2 day delivery which never happened and told I have to wait because it's the shippers fault and not theirs. There's no Activity or info when I put in my tracking number for my LAST and I mean LAST purchase. Also t hey leave out tons of info on their instal videos which you find out you now have to buy more to do the instal. That's just lying and false advertisement by exclusion.
My filter keeps falling off
Is it due to faulty clamp or faulty filter
It may just be the clamp itself! If it is still falling off after being tightened down properly, I would give our customer service team a call. They will be able to help you out. 1-877-887-1105 -Zach
Until you inform your customers that it voids their factory 🏭 warranty, when they install any cold 🥶 air intake it voids their warranty. I will not subscribe your channel
Please provide proof this will void your warranty.