Mercedes Brake Pad Replacement Mode
HTML-код
- Опубликовано: 30 окт 2020
- If you are replacing your rear brake pads then you will need to use this function in order to release the electronic handbrake mechanism so that you can access the brake pads and then if required removed the disc
Авто/Мото
Thank you big help. first advice released the handbrake.
Thanks you very much !!!!!
Brilliant, this quick video just saved me about 300 quid!
Looking forward to the “cheque in the post!” 😂😂
Thank you 😊
This is way faster then booting up my scanner to put the brakes in service mode...
Helpful thanks
Great to hear. Thanks for the positive feedback 👍
Thank you! Your video worked for my American model. Cheer!
Glad to have been of help👍
Does this E.213 share front brake pads with the GLC 2017 model ?
The GLC shares its under pinnings with the C which shares virtually all of its floorplan with the E, so i suspect it will. Even if the sizes were different then the methods of changing would be the same.
Just want to ask after doing the brake pad release in the dask board do you need to switch off the engine while replacing the pad?
Yes. The engine should not be on anyway. Think this is done in the Ignition position (but you’d have to check the video).
Thanks 👏👏👏
Any idea of method for the model without the wide screen? 2016 W213
This might help? ruclips.net/video/UrUFpt2IM7c/видео.html
Is this for the rear pads? Do you need to do it for the fronts as well?
Only for the rears 👍
Hey if I am trying this and the car tells me fitting position not met what should I do?. I took the caliper pistion off and changed the breaks like you would on a normal car not knowing of this process. Now i cant get the piston to retract in.
I’m sorry, i don’t know the answer. Maybe refit the old parts and see if the replacement mode works then refit the new parts?
I had that problem and had to twist the caliper piston inward then Compress it
With a c clamp…
Thank you!! All these other videos are dumb!
I think that’s a compliment? (assuming you don’t mean all of the other ones on my channel🤔)
Does this method work on newest 2023 C series ?
It is very likely as the MBux system that was put in the 213 after the 2020 facelift has the same “hidden menu”.
Does this remove the need for a wind back tool
No. You use this to release the “handbrake” (it clamps the pads on to the disc) and then you proceed as normal to repair the pads/discs like another car. There is a video on how to do the rear brakes on my channel aswell 👍
Top.. 😎
Thanks 👍👍
Do you need to set a gear to Neutral (N) Position?
No you do not need to put it in neutral and can stay in park
@@mercedes_and_more thank you. I’ve seen some videos on RUclips, that said that you always need to set a gear in N, because you can’t get out of break pad replacement mode if you don’t do it. But you have already done it, that’s why I asked you. Thank you for helping
@@lamoorproduction550 I’ll check tomorrow but I’m 99% sure you don’t leave park! You’ve got me wondering now 😳
So i said i would Check. Car in park and handbrake on it said conditions not met. So pressed the key again to get all lights on and then released the handbrake. Pressed key start again to go back to ignition and went into fitting mode when asked (car in park). Clearly doing this in N would not be good as the car is free to roll if not on level ground👍
@@mercedes_and_more thanks for helping
If we dont do this we wont be able to replace rear brake pad?
Correct. This frees the pads for the discs, although you still need to wind them back in (as per the video). In reality, this is releasing the electronic handbrake in a way that will not allow it to be reapplied during the brake pad change 👍
@@mercedes_and_more thank you
Do you realize that knowing the goshdarn YEAR would HELP!!!!!
??? Not quite sure what you mean by your comment? Think it’s good but…