That's great! Cpuld you please show or tell me which temp sources are available fornthe chassis fan or fan headers in general? Cause I would like to have an cpu and gpu one so that the system uses the highest one on occasion..thanks!
I dont know about it. I got this board a while ago and my bios is almost unusably slow and laggy. for the rest you get a lot less control than for example on an asus board
I just bought a X570 Taichi and it shipped with BIOS ver. P3.80. And I bought a Ryzen 7 5800x to go with it. Does anyone know if it will post without changing anything? The website says the boards BIOS has had support for the chip since P3.40. I'm pretty sure it will post with no problems but I'm only asking cause the guy who helped me when I bought it said I would have to update the BIOS.
well one thing i will say is this when i contacted support they replied 100% of the time with actual tech support that was precise and helpful unlike thermaltake who let me down twice - i am loving the x570 bios and the board and the support - happy days
@Dex4Sure yea i can agree with you, but for me i really wanna a very well balance between aesthetics and functionality what asrocks puts into their bios is anyway too much for daily use and if you dont know what your doing you are lost in a second in this bios, like linksys vs cisco routers ya know that kind of thing =P
@Giles Coolen - The SB fan is LOUD... but only because, at least on mine, the X570 Taichi after a clear CMOS sets it to maximum speed by default. HOWEVER... It wasn't shown in this video but you can configure the profile for the SB fan with the same Silent, Normal, Performance and Max settings as all the other fan headers. For whatever reason it is not listed in 'Fan-tastic Tuning' but it is last on the list under Fan Configuration at the bottom of the H/W Monitor tab, he just didn't scroll down all the way to it when he went in there at 8:45 All I currently have connected to the SB is a couple of SATA devices and the built in USB/sound/Ethernet etc... it runs around 60-65C when set to SILENT and sitting under a PowerColor Red Devil Vega 64 2.5 slot cooler. Silent and Normal make it almost undetectable... Performance and Max are ridiculous.
When I had my computer built I have two data drives were set up as 'hot swappable'. I want to change them to 'non-hot swappable. My motherboard has the 'quick setup' and the 'easy' setup which gives you more control to the settings. The motherboard was put in about 2 months ago and it is: Board: ASRock Z690 Steel Legend I don't want to go digging around and mess something up.
Thanks for this overview! I have just changed from a Intel system to a AMD system and bought the X570 Tachi Razer edition, my bios is pretty much identical as this. My motherboard supports 3x nvme drives but although they all show on the drives screen, no boot option is shown, I know they all work because they came from my Intel machine. taking them all out and using plug in SATA drives I can then select the boot option, but not with just 1, 2 or 3 nvme drives installed, it just bios loops on startup and pushing F11 says no boot drives available. Edit my system now is AMD Pro 4750G on Razer edition with 32gb from Gskill, corsair 1tb nvme
Hi, I have the asrock A320-M motherboard and I need to connect two monitors, one to the motherboard and the other to the graphics card (Asrock RX 570) I want to do it from the bios, how do I bro?
Have they updated the gui on the newer bios since you made this video? LOVED the ROG bios but hate Asus hardware (several boards had capacitors just fall off, including the ROG Strix X570-E Gaming)
I'm doing a build using Taichi X399M. Can i boot to BIOS before attaching the heatsink on my Threadripper CPU? I want to make sure the system boots ok first, because I don't know how I would get the CPU out once I've glued on the heatsink.
awesome if you could do a quick revision change for razer edition bios 1.4 x570 - how to enable 4.0 PCI-E for EG .... no one i talk to seems to know this, i am currently inside this dilemma.
with a P5.00 bios can I pop in a 5800x I have a 3800x in it now.The bios is P3.40 so I assume mine has enough.I can see the previous owner updated to work with rtx 40 series.
The lack of Sata Hot Plugging is driving me nuts. My x370 Taichi had it. I have a case with removable drive bays so now every time I want to change a drive I have to shut down
well for one i guess just a speculation, if you have good enough cooling solution on your cpu like good thermal and cooler, be that a beefy fan cooler or water cooler, it will automatically oc you cpu to the highest stable frequency, for example i have a stock cooler on 3600 and temperature is 50 degrees in bios (not good actually) and it goes to around 3.9GHz on auto, i can tune manually however i want, but with better cooling and lower temp, the overclocking on cpu will get higher
Hi I just came across your video and I have to say thanks for the review. I have updated my bios for the new zen 3 chips but now i notice the rgb software for the board is acting funny. it looks like there is a conflict with my Nivida drivers. Can the rgb on the mother board control my ram? as of now it is static but the ram comes up a differant color.. Just woundering?
6:42 is SSD Secure Erase tool and MVME Sanitization Tool the same we Clear Secure Boot Keys?! my NVME is only going to mbr mode, not GPT for uefi compatible. i dont find tutorial for this problem. my sub only boot in normal mode and i will go in fresh windows.. ssecond time i try to get nvme to gpt... dont work. can you or any oither make a quick tutorial? nso much people didnt no to use uefi mode to get fast pc and dont use Fast Boot?!
Thanks for the video, exactly what we were looking for. We have a Ryzen 2700 on this board while we wait for a Ryzen 5600X to become available. There's no Infinity Fabric Frequency and Dividers section in the OC Tweaker. Does anyone know if this is a limitation of the processor? We are using the latest 3.80 BIOS. I'm thinking it is a processor issue and for the time being we can't run the RAM at full speed.
Taichi for 300$ NewSub :-) or Asus TUF Gaming X570-PLUS (Wi-Fi) 240$ X570 Aorus Elite (rev. 1.0) 200$ ? I don't know about VRAM if TUF or Aorus Elite have better ones. Thx man. Unfortunately here in EU there are few Taichis at all on whole market. All Asus,Gigabyte,MSI spam. T_T
Just built a nice rig with this mobo. My issue starts within these settings and I dont know why or how to fix tho. I changed to xmp profile, saved profile, then saved and exit and it runs flawlessly. Then if the pc shuts down or goes into sleep, it resets my settings back to default without xmp profile and starts to boot loop until I shut it down, restart n get back into uefi and manually put xmp back on. I wish it would just properly save it and load it every time so I didn't have this recurring boot loop issue
you have to make sure you have the fast boot option set to disabled, then CSM options will appear. I hate that they made it like that. should just be grayed out if anything.
There is no onboard graphics/integrated graphics. Motherboards haven't had integrated graphics for a long time. They got integrated with the CPU. Very few AMD CPU's even have integrated graphics though, only their APU's and the Ryzen 3 3200G and Ryzen 5 3400G. So unless you have a "A series" APU or one of the few Ryzen G CPU's you do not have integrated graphics.
This motherboard is a T-topology, can you please tell me is it better to have 4 dimms or 2 dimms cuz Buildzoid mentioned in GNs video that T-topology mobos like 4 dimms more than 2... i dont want to overpay for RAM kits can u please help me by telling me few options cuz asrocks qvl is a mess...
I saw the same thing, so I went with 4 X 8 Corsair vengeance 3200. I have no plans to overclock other than XMP, wanted it to run right out of the box, and figured better too much memory. I wonder how big the difference in speed would be? Booted up first time, no problems with the 32 gigs.
For some reason I can't wake up the pc from sleep with mouse and keyboard with this board, I have to push the power button. In device manager I have the devices enabled. Also waking from sleep the debug light shows "30" after waking up.
Hey, nice video, Do you have any info on how this board deals with different ram configs/mhz/timings? 2 sticks 4 sticks 8gb sticks 16gb sticks single rank dual rank?
This board uses T-Topology, which is a way the RAM interacts with the CPU. It generally runs better using 4 sticks of RAM. Most other 570 boards use daisy chain topology, which generally runs better with 2 sticks of RAM. I have bought G.Skill X 3200 CL 14 to run with my AMD R5 3600. This is one of the highest performing RAM with this CPU depending on what you're looking for. RAM with 3600 CL 16 or CL 17 will perform well with gaming and applications. Mine is centered for gaming. I hope this answers your question.
@@joweerush2923 I was looking to buy 4 sticks of 8gb single rank g skill flare x 3200mhz cl14 but for half the price I can get cl16 3200mhz are you able to provide me with info on the difference it would make to gaming and cpu perf? I'm looking to buy a x570 taichi with a 3900x at the end of August
@@thinkcomputers1 Better be careful, LLC1 can damage your CPU with a voltage spike during transitions. Are you aware of that? I would be very concerned while using LLC1. Is better to have a bit more voltage at idle and let it vdroop at full load with LLC3.
You skip so much... These are settings for the CPU... and then? And then? And then? AMD CPU fTPM? What's that do? I saw another RUclipsr claim it allows for the Safe Boot to work properly. It doesn't do the trick. I was hoping you'd shed some light on the subject. But you just barely skim the surface. The AsRock manual is of no use. This is ridiculous.
@@thinkcomputers1 Is the Polychrome software required or can you operate the RGB LEDs purely from the BIOS (albeit in a more simple manner)? If so, will that transfer to and sync with all devices connected to ARGB headers on the motherboard? Lastly, are you aware of any other motherboard manufacturers doing something similar with BIOS level RGB control? Gamers Nexus recently did a piece on the performance hit from bloatware and I from my own experience would prefer to not have to deal with several softwares (any ideally).
@@davidtolley1374 Yes you can operate RGB completely from the BIOS without software, definitely less features that way, it should relay to all headers as well. I believe ASUS and Gigabyte offer something similar too.
What do you think of ASRock's X570 BIOS?
That's great! Cpuld you please show or tell me which temp sources are available fornthe chassis fan or fan headers in general? Cause I would like to have an cpu and gpu one so that the system uses the highest one on occasion..thanks!
I dont know about it. I got this board a while ago and my bios is almost unusably slow and laggy. for the rest you get a lot less control than for example on an asus board
@@ctrang0458 is it still shit
@@ctrang0458 and what is less vs asus
I just bought a X570 Taichi and it shipped with BIOS ver. P3.80. And I bought a Ryzen 7 5800x to go with it. Does anyone know if it will post without changing anything? The website says the boards BIOS has had support for the chip since P3.40. I'm pretty sure it will post with no problems but I'm only asking cause the guy who helped me when I bought it said I would have to update the BIOS.
Thanks for showing us what to expect from this board's UEFI.
well one thing i will say is this when i contacted support they replied 100% of the time with actual tech support that was precise and helpful unlike thermaltake who let me down twice - i am loving the x570 bios and the board and the support - happy days
I keep hearing that ASRocks BIOS is junk. That looked fine to me.
well Asus' looks the best so far, asrock doesnt really give a shit about how their bios appeals to others other than functionality i guess :P
@Dex4Sure yea i can agree with you, but for me i really wanna a very well balance between aesthetics and functionality
what asrocks puts into their bios is anyway too much for daily use and if you dont know what your doing you are lost in a second in this bios, like linksys vs cisco routers ya know that kind of thing =P
I've been using BIOS for last 30 years and that UEFI looks efficient which is all I need.
Just watched your reviews of the bios for the various x570 boards and found them to be very helpful in terms of what i am looking for. Thank you.
Glad we could help!
This is gold! Very very helpful for beginners! Hats off to you pal you gave me confidence and knowledge to build my first pc!
@Giles Coolen - The SB fan is LOUD... but only because, at least on mine, the X570 Taichi after a clear CMOS sets it to maximum speed by default. HOWEVER...
It wasn't shown in this video but you can configure the profile for the SB fan with the same Silent, Normal, Performance and Max settings as all the other fan headers. For whatever reason it is not listed in 'Fan-tastic Tuning' but it is last on the list under Fan Configuration at the bottom of the H/W Monitor tab, he just didn't scroll down all the way to it when he went in there at 8:45
All I currently have connected to the SB is a couple of SATA devices and the built in USB/sound/Ethernet etc... it runs around 60-65C when set to SILENT and sitting under a PowerColor Red Devil Vega 64 2.5 slot cooler.
Silent and Normal make it almost undetectable... Performance and Max are ridiculous.
I am considering this Mobo for my new build so thanks for the review
When I had my computer built I have two data drives were set up as 'hot swappable'. I want to change them to 'non-hot swappable.
My motherboard has the 'quick setup' and the 'easy' setup which gives you more control to the settings.
The motherboard was put in about 2 months ago and it is:
Board: ASRock Z690 Steel Legend
I don't want to go digging around and mess something up.
Could you show us how to update the bios on this taichi x570 board and also how to setup xmp?
Easiest sub of my LIFE
Thanks for this overview! I have just changed from a Intel system to a AMD system and bought the X570 Tachi Razer edition, my bios is pretty much identical as this. My motherboard supports 3x nvme drives but although they all show on the drives screen, no boot option is shown, I know they all work because they came from my Intel machine. taking them all out and using plug in SATA drives I can then select the boot option, but not with just 1, 2 or 3 nvme drives installed, it just bios loops on startup and pushing F11 says no boot drives available. Edit my system now is AMD Pro 4750G on Razer edition with 32gb from Gskill, corsair 1tb nvme
5:30 You don't void your warranty if you'll remove CMOS battery for few minutes before you'll send your motherboard for RMA. :P
Thanks for these! Hope you surprise us with the Crosshair VIII Hero next.
Still don't have one...working on it though!
2:49 I changed my xmp profile but every time I go back into the uefi menu, it says my ram is still at factory speeds? What am I doing wrong
U might have your ram in slots A1 and B1 which is what I did but what u need to do is put them in slots A2 and B2
It's been 3 years, but I wonder if it looks the same resolution on the monitor as it does on this screen?
Hey ThinkComputers! Love the video - just one question, would you know where to look to change the power delivery for specific USB ports?
Hi, I have the asrock A320-M motherboard and I need to connect two monitors, one to the motherboard and the other to the graphics card (Asrock RX 570) I want to do it from the bios, how do I bro?
Thanks for the video really handy seeing what to expect! Got my x570m pro 4 on the way! :D
Finally got to the bios, but how do I get to the Home Screen?
Nice video. How to activate wifi? Activated Wan in bios, didn't help. Please advise.
Have they updated the gui on the newer bios since you made this video? LOVED the ROG bios but hate Asus hardware (several boards had capacitors just fall off, including the ROG Strix X570-E Gaming)
Please tell me how to enable TPM in these bios
How do you activate the thunderbolt 3 feature on Bios...If I installed a Gigabyte Titan Ridge 2.o card with the AsRock Taichi x570?
Where can I find the settings to display cpu temps in the debug fisplay on the board?
I'm doing a build using Taichi X399M. Can i boot to BIOS before attaching the heatsink on my Threadripper CPU? I want to make sure the system boots ok first, because I don't know how I would get the CPU out once I've glued on the heatsink.
The folder AMD OVERCLOCKING isn't showing in my Bios? Any idea?
awesome if you could do a quick revision change for razer edition bios 1.4 x570 - how to enable 4.0 PCI-E for EG .... no one i talk to seems to know this, i am currently inside this dilemma.
with a P5.00 bios can I pop in a 5800x I have a 3800x in it now.The bios is P3.40 so I assume mine has enough.I can see the previous owner updated to work with rtx 40 series.
The lack of Sata Hot Plugging is driving me nuts. My x370 Taichi had it. I have a case with removable drive bays so now every time I want to change a drive I have to shut down
Hi thanks for this. How do you enable thunderbolt?
Why does his BIOS show 4400MHz, but he's AUTO everywhere in OC Tweaker. Is 4400MHz core clock?
well for one i guess just a speculation, if you have good enough cooling solution on your cpu like good thermal and cooler, be that a beefy fan cooler or water cooler, it will automatically oc you cpu to the highest stable frequency, for example i have a stock cooler on 3600 and temperature is 50 degrees in bios (not good actually) and it goes to around 3.9GHz on auto, i can tune manually however i want, but with better cooling and lower temp, the overclocking on cpu will get higher
@@nxk5116 I don't know I agree with pablo his set up is weird with auto and stuff and everything is working above normal ? even his ram placement ?
Is ASPM in this motherboard bios called something else.?
Hi I just came across your video and I have to say thanks for the review. I have updated my bios for the new zen 3 chips but now i notice the rgb software for the board is acting funny. it looks like there is a conflict with my Nivida drivers. Can the rgb on the mother board control my ram? as of now it is static but the ram comes up a differant color.. Just woundering?
6:42 is SSD Secure Erase tool and MVME Sanitization Tool the same we Clear Secure Boot Keys?! my NVME is only going to mbr mode, not GPT for uefi compatible. i dont find tutorial for this problem. my sub only boot in normal mode and i will go in fresh windows.. ssecond time i try to get nvme to gpt... dont work. can you or any oither make a quick tutorial? nso much people didnt no to use uefi mode to get fast pc and dont use Fast Boot?!
X470 ASRock taichi ultimate help
Do you have an overview for this? What's the link. But this looks very much the same.
Thanks for the video, exactly what we were looking for. We have a Ryzen 2700 on this board while we wait for a Ryzen 5600X to become available. There's no Infinity Fabric Frequency and Dividers section in the OC Tweaker. Does anyone know if this is a limitation of the processor? We are using the latest 3.80 BIOS. I'm thinking it is a processor issue and for the time being we can't run the RAM at full speed.
Taichi for 300$ NewSub :-)
or
Asus TUF Gaming X570-PLUS (Wi-Fi) 240$
X570 Aorus Elite (rev. 1.0) 200$
?
I don't know about VRAM if TUF or Aorus Elite have better ones. Thx man.
Unfortunately here in EU there are few Taichis at all on whole market. All Asus,Gigabyte,MSI spam. T_T
Taichi is the better of all. Even feature wise.
Just built a nice rig with this mobo. My issue starts within these settings and I dont know why or how to fix tho. I changed to xmp profile, saved profile, then saved and exit and it runs flawlessly. Then if the pc shuts down or goes into sleep, it resets my settings back to default without xmp profile and starts to boot loop until I shut it down, restart n get back into uefi and manually put xmp back on. I wish it would just properly save it and load it every time so I didn't have this recurring boot loop issue
How do you disable csm? I’m having trouble installing windows from USB to NVME drive. It goes into windows installer menu but then just hangs there.
you have to make sure you have the fast boot option set to disabled, then CSM options will appear. I hate that they made it like that. should just be grayed out if anything.
Very help full thanks.
My xmp Profile is visible to select. I select it, and it does not change my frequency or timings. How do i get it to load my XMP profile?
Are you saving your settings?
What should I set my cpu fan to? I tried setting a curve for my 3700x but it goes up to 84C
why do you have the memory installed in wrong slots ?
How do u access that screen
How to disable onboard graphics card?
There is no onboard graphics/integrated graphics. Motherboards haven't had integrated graphics for a long time. They got integrated with the CPU. Very few AMD CPU's even have integrated graphics though, only their APU's and the Ryzen 3 3200G and Ryzen 5 3400G. So unless you have a "A series" APU or one of the few Ryzen G CPU's you do not have integrated graphics.
I keep clicking save changes and exit and it keeps loading the bios again help me please
What power supply did you use
This motherboard is a T-topology, can you please tell me is it better to have 4 dimms or 2 dimms cuz Buildzoid mentioned in GNs video that T-topology mobos like 4 dimms more than 2... i dont want to overpay for RAM kits can u please help me by telling me few options cuz asrocks qvl is a mess...
I saw the same thing, so I went with 4 X 8 Corsair vengeance 3200. I have no plans to overclock other than XMP, wanted it to run right out of the box, and figured better too much memory. I wonder how big the difference in speed would be? Booted up first time, no problems with the 32 gigs.
@@alanbiker5838 thank you! Got myself 2x16 b.die 3200c14 works perfectly
For some reason I can't wake up the pc from sleep with mouse and keyboard with this board, I have to push the power button. In device manager I have the devices enabled. Also waking from sleep the debug light shows "30" after waking up.
H/W monitor on bios showing high temperatures . please help me out.
Hey, nice video,
Do you have any info on how this board deals with different ram configs/mhz/timings? 2 sticks 4 sticks 8gb sticks 16gb sticks single rank dual rank?
This board uses T-Topology, which is a way the RAM interacts with the CPU. It generally runs better using 4 sticks of RAM. Most other 570 boards use daisy chain topology, which generally runs better with 2 sticks of RAM. I have bought G.Skill X 3200 CL 14 to run with my AMD R5 3600. This is one of the highest performing RAM with this CPU depending on what you're looking for. RAM with 3600 CL 16 or CL 17 will perform well with gaming and applications. Mine is centered for gaming. I hope this answers your question.
@@joweerush2923 I was looking to buy 4 sticks of 8gb single rank g skill flare x 3200mhz cl14 but for half the price I can get cl16 3200mhz are you able to provide me with info on the difference it would make to gaming and cpu perf? I'm looking to buy a x570 taichi with a 3900x at the end of August
Where to enable DOCP ?
asrock x570 to get into bios I have to use the UEFI app ..
how to toggle UEFI node
Level 1 LLC by default (max LLC)? Really?
We were overclocking, 4.4 on all 12 cores likely why its at Level 1, typically it would be at 3
@@thinkcomputers1 Better be careful, LLC1 can damage your CPU with a voltage spike during transitions. Are you aware of that?
I would be very concerned while using LLC1. Is better to have a bit more voltage at idle and let it vdroop at full load with LLC3.
You skip so much...
These are settings for the CPU... and then? And then? And then?
AMD CPU fTPM? What's that do?
I saw another RUclipsr claim it allows for the Safe Boot to work properly.
It doesn't do the trick.
I was hoping you'd shed some light on the subject.
But you just barely skim the surface. The AsRock manual is of no use.
This is ridiculous.
how do i run windows 7 legacy mode
Is there a reason my rgb from my 570 taichi is always on even when the computer is turned off?? Thanks
Yes there is a setting in ASRock's Polychrome software where you can turn that off
Thank you!
@@thinkcomputers1 Is the Polychrome software required or can you operate the RGB LEDs purely from the BIOS (albeit in a more simple manner)? If so, will that transfer to and sync with all devices connected to ARGB headers on the motherboard? Lastly, are you aware of any other motherboard manufacturers doing something similar with BIOS level RGB control? Gamers Nexus recently did a piece on the performance hit from bloatware and I from my own experience would prefer to not have to deal with several softwares (any ideally).
@@davidtolley1374 Yes you can operate RGB completely from the BIOS without software, definitely less features that way, it should relay to all headers as well. I believe ASUS and Gigabyte offer something similar too.
@@thinkcomputers1 Good to know. Thank you!
*I'm hoping that I can just enable PBO on the 3900x, and everything will be cool.*
Ugh it's gonna be another many years of this bios. My x370 is time to go bye bye
I’m trying to install windows!!!!
Goes over all the things that are self explanatory and skips all the other settings. "Just different options and stuff like that" lol
Ram testju?
8:08. " It may take 3-5 minutines to complete" (facepalm). Really...Asrock? You couldn't proof-read your bios first? lol.
Its possible raid mode with two nvme m.2? I dont see this option with setup in AHCI Thy!
yes