In all honesty I think he deserves a car build of his own to be on the channel. Like Adam goes out and buys him a car he’s always wanted and the whole team works on making it how johan wants it to be. I know he’s a nice guy and probably wouldn’t ever ask for such a thing but I think he deserves it, especially after all the amazing work he’s done on the 34.
@@davidkelley751 doing your job the right way should be normal. it is not that he did that all from the goodness of his heart... (yes he is a great guy, and yes he is a great mechanic, and so on and so on.
@@drewpatto8433 I know this. I’ve built a steel 6ft wide blasting cabinet. Biggest things I go through are sand, glass, & the ceramic tips for the gun. & air compressor repairs.
For you young folk out there, the communication between the two of them is admirable and healthy. Being able to honestly let each other know their expectations in this type of situation is awesome. Good on ya Adam.
The sand gets dirty over time & clogs the line, if you actually wear the gloves & put the tip of the gun to your palm blocking the gun, the gunk will back flow into the sand & unclog the line allowing the sand to flow properly & efficiently, hope it helps!
Adam's honesty about his abilities is my favorite thing about him. I feel like most youtubers wouldn't say on camera "such and such is going to show me how to use this, I've never used it before."
I don’t think he’ll need a rebuild, Since he’s using his fd body kit. But those would be sick. Just not for what he’s using it for. Smashing up 5k+ wheels on a “drift beater/seat time car” isn’t worth it lol
@@Steven-rg4bo I thought his pro 2 kit wasn't as wide as the yashio kit he's running now? But ye it'd be dumb to ruin 5k worth of his beater than isn't a beater if you get me
jimmy's cool, I was just hanging out with him last month when he had his mom drifting, I had my car out with him. It's cool to see someone like a bigger youtube just randomly, they just are normal dudes that we can all be like, its cool. and jimmys great in person too
Dope of you to show some of the work that goes into engine building, really helps those of us who get how engines work but have never wrenched on one 🤘🏻 , keep the great content coming florida boys
Don't know if it was already mentioned but upol raptor liner Bed liner kits come in a tintable version you mix base coat in to match your paint, would be perfect for the wheel wells and undercarriage
@7:20 That's actually how its suppose to be laid down per the service manual. You lay better beads than I've seen from some of my fellow techs lol. Good work - Infiniti Tech
That makes sense cause you don’t know any of them and you aren’t friends with any of them so that’s be really weird if some random viewer was just there
I worked in a shop where we sand blasted stuff, if you can find the stainless steel ball media it leaves the nicest finish and it also eats through paint pretty well but mainly I liked it for the finish it leaves on the parts. Try it maybe! 🤷♂️
you know thats true love when he just randomly goes out of the way to try and help whenever he can without really needing to.. but just a... just cause type of thing :')
Funny. I work In aerospace , I use those blasters all the time. You need to maintain the magnet in the hopper. Check and make sure the seal and pressure check valve are good on the door . Put a turn table in that blaster. Prevent damage to the parts and saves time plus easier on the operator..
It was interesting to see the results of the mystery SR20. Another good example to learn what can go off with the pan. The RX 7 was pretty cool. The ones that appear at Daikoku PA on Sam's vids are some real classy cars. Getting off the length and weight of the corvette would certainly be a different kind of experience and ride.
@ 2:52 time stamp. Them two pieces are from the secondary oil pan. When the 10s im assuming are over torqued it brakes the back of the casting for the threads. Probably have oil leaks. Look inside the secondary pan.
@@shaunlatter5263 both Nitto tyres... both big into social media stuff, and the S15 had done 3 or 4 season now and I can't remember the last time we saw the Barra ?
Dawn soap power spray will take care of the oil stains on the block. Does wonders vs. oil but won’t hurt paint. (Also works on oil stained clothes, concrete, interior, etc…)
God dammmmmm! Dude ADAM LZ and TOMMYFYEAH have the absolute best content! They collecting cars I can only dream of. I just paid off my 2020 F-150 Premium!
The glass media or sand media will impregnate the metal not to mention its almost impossible to remove all of the media. Media blasting heats up the surface and it will get stuck in the pores more or less the aluminum then cast iron but when the engine gets warm "sometimes" that media gets dislodged and since its light gets pushed through the motor wreaking havoc. Ive personnelly had this happen to me at work, when i do engine parts i have a separate cabinet with just walnut media and thats way safer for engines. Dry ice blasting is the way to go or steam washer. I hate to be "that guy" just relayying a little info that might safe alot of headache in the future!
these sr vids are pretty good im going to be getting a s13 very soon, literally fell in love with that car cause of the cream one. hopefully I dont get any metal chunks in the sr when the time comes
Those LED fixtures are going to make everything look great. Thinking you got 4000k, it’s a good white light, easy on the eyes and it’ll make all that fancy paint and wraps pop! 5000k may be too much.
I think it’s a very subtle hint, with him wearing the ford hat is him endorsing ford, next season he will be driving the Barra Gt350 for RTR which explains why it’s been missing because it’s currently off being built to an FD standards
after the klutch kickers ordeal, johan deserves sand blaster rebuild :-)
In all honesty I think he deserves a car build of his own to be on the channel. Like Adam goes out and buys him a car he’s always wanted and the whole team works on making it how johan wants it to be. I know he’s a nice guy and probably wouldn’t ever ask for such a thing but I think he deserves it, especially after all the amazing work he’s done on the 34.
@@davidkelley751 that would be a great Idea but I think he has his dream car. I’m not 100% sure but definitely a good idea.
@@Spoder_Man true. Maybe not dream car, but something close.
Also nice name and profile pic. Forgot Spoder man was a thing till now.
@@davidkelley751 doing your job the right way should be normal. it is not that he did that all from the goodness of his heart... (yes he is a great guy, and yes he is a great mechanic, and so on and so on.
Naw, deserves a vapor blaster
Johan just subtly telling Adam to get the sand blaster fixed because he broke it
"When it's fixed it will work really good" and "yea the first time I used it it wasn't broken" 😂😂
Old stuff breaks. Not Johan’s fault.
@@drewpatto8433
I know this. I’ve built a steel 6ft wide blasting cabinet.
Biggest things I go through are sand, glass, & the ceramic tips for the gun.
& air compressor repairs.
ruclips.net/video/HaZUsd0cydw/видео.html
I meannnn…. If Collette doesn’t want the FC you have a perfectly good 13b in another very particular Yellow FD that needs to be taken out… 🤷♂️
yesyesyes
Some sort of a rotary seat time car 🤔
Dooooo it
Actually yeah that would be really cool.
the fc (13b dei) has an inferior motor to the one that comes in the fd (13b rew)
Adam really got the best content atm, props to him.
Yeah like in all honesty drifting content is more exciting, but watching him disassemble an engine and just hang out around the compound is still fun.
Compound revived his channel IMO I took a break for a while.
@@davidkelley751 I agree, the drift content is epic but just seeing him talk through the sr20 and all the compound stuff is very interesting.
@@joerebis8508 definitely a massive opportunity for him and it’s made such a big difference to the channel
Fo sho
love it when an LZ video comes in clutch towards the end of the day.
fr
Factsss
Congrats on your first FD victory, Johan said it so it has to happen now.
John needs a bonus. He’s a G
Excuse me sir, did you say cookie? 😤😤😤
Give this man his Oreos.
Mr oreo has entered the chat
Take the keys.
series 3
He was hungry
For you young folk out there, the communication between the two of them is admirable and healthy. Being able to honestly let each other know their expectations in this type of situation is awesome. Good on ya Adam.
my boy sean living the dream, high asf and working on cars.
She hit her face so hard when she saw the shell lmao.
caught me off guard as much as it did adam lmao
I heard and thought the same thing lol.
The sand gets dirty over time & clogs the line, if you actually wear the gloves & put the tip of the gun to your palm blocking the gun, the gunk will back flow into the sand & unclog the line allowing the sand to flow properly & efficiently, hope it helps!
Keep the FC and build it so you two can go twinning rotaries
we need more FC’s on youtube
Adam's honesty about his abilities is my favorite thing about him. I feel like most youtubers wouldn't say on camera "such and such is going to show me how to use this, I've never used it before."
Adam please put the blitz 03s from the fd s15 on the Sr s15 please (ik you'll have to rebuild them but they will look sooooo good)
I don’t think he’ll need a rebuild, Since he’s using his fd body kit. But those would be sick. Just not for what he’s using it for. Smashing up 5k+ wheels on a “drift beater/seat time car” isn’t worth it lol
@@Steven-rg4bo I thought his pro 2 kit wasn't as wide as the yashio kit he's running now? But ye it'd be dumb to ruin 5k worth of his beater than isn't a beater if you get me
@@lowboidrifting9096 actually you might be right I’m not sure how much wider his kit is now.
no
i really love how much attention you(adam) takes in the little stuff. Even a silicone bead looks nice when done right!!
Adam always got the best content well him an jimmy for sure
Fosho, came here right after Jim's sub mail vid
Tommy especially since he hired a filmer and the new shop
U right
jimmy's cool, I was just hanging out with him last month when he had his mom drifting, I had my car out with him. It's cool to see someone like a bigger youtube just randomly, they just are normal dudes that we can all be like, its cool. and jimmys great in person too
Yeah MAMA O, Jimmy, Taylor,Adam and Collete - those are the only people that keep me coming to RUclips 🤍🤍
Dope of you to show some of the work that goes into engine building, really helps those of us who get how engines work but have never wrenched on one 🤘🏻 , keep the great content coming florida boys
Don't know if it was already mentioned but upol raptor liner Bed liner kits come in a tintable version you mix base coat in to match your paint, would be perfect for the wheel wells and undercarriage
I love all these uploads🔥🔥 mind blowing from watching you for 3 4 years and where you've come since then so awesome man
@7:20 That's actually how its suppose to be laid down per the service manual. You lay better beads than I've seen from some of my fellow techs lol. Good work - Infiniti Tech
That bolt which the backing broke out of now needs some form of sealer. Otherwise there's a leak path for oil
I can’t imagine being apart of this team. Keep up the good content and vibes
That makes sense cause you don’t know any of them and you aren’t friends with any of them so that’s be really weird if some random viewer was just there
@@ItzzTesta awesome reply!
@@ItzzTesta 😂
I worked in a shop where we sand blasted stuff, if you can find the stainless steel ball media it leaves the nicest finish and it also eats through paint pretty well but mainly I liked it for the finish it leaves on the parts. Try it maybe! 🤷♂️
you know thats true love when he just randomly goes out of the way to try and help whenever he can without really needing to.. but just a... just cause type of thing :')
Everything for “FAMILY”
Funny. I work In aerospace , I use those blasters all the time. You need to maintain the magnet in the hopper. Check and make sure the seal and pressure check valve are good on the door . Put a turn table in that blaster. Prevent damage to the parts and saves time plus easier on the operator..
When i heard the word “Ebisu” got stoked right away!
Cant wait for Adam and Collette to go there!!
Btw love every single piece of content you make!!
Dam professor lupin is building your cage? Thats sic
Fr lmao
Dude Johan is one of the people I look up to them most. Awesome dude man
Awesome content Adam.
Your crew truly works very hard.
Would have been cool to see a rotary build from you
It was interesting to see the results of the mystery SR20. Another good example to learn what can go off with the pan. The RX 7 was pretty cool. The ones that appear at Daikoku PA on Sam's vids are some real classy cars. Getting off the length and weight of the corvette would certainly be a different kind of experience and ride.
Nice of you to fully understand Collete.
I am loving all this SR content !!!!
@ 2:52 time stamp. Them two pieces are from the secondary oil pan. When the 10s im assuming are over torqued it brakes the back of the casting for the threads. Probably have oil leaks. Look inside the secondary pan.
I cant wait to see you at Irwindale. Im gonna make the 10 hour drive. My wife got me trackside tickets for my birthday
Haha dream wife! Enjoy your day man, it's gonna be worth the drive for sure haha
How much do we need to read into the Ford cap Adam is wearing that he adjusts at the start of almost every clip.
U thinking Adam lz rtr fd team next season???
@@shaunlatter5263 both Nitto tyres... both big into social media stuff, and the S15 had done 3 or 4 season now and I can't remember the last time we saw the Barra ?
I got merch from Adam LZ and it came with the Hi-Chew and I got confused for a second then forgot he does that
Red cookie i can already hear sammit crying 😂
"It's Hammer time" Great video! Lots of different projects going on simultaneously🔥💪
Cage guy is putting Adams stash game to shame. 😂😂
Love all the new builds can't wait to c finish product
i cry at the end every time that song comes on.
Light wars been waiting all my life for this
I have been waiting on a 7 month backorder for 19x10.5 +35 57DR’s. Adam gets a shipment of 10 in less than a week🤦♂️🤦♂️🤦♂️
Dawn soap power spray will take care of the oil stains on the block. Does wonders vs. oil but won’t hurt paint. (Also works on oil stained clothes, concrete, interior, etc…)
Usually you gotta hot tank the pan to get all dirt and stuff off then when you hit it with a sandblaster it’ll come off quickly
God dammmmmm! Dude ADAM LZ and TOMMYFYEAH have the absolute best content! They collecting cars I can only dream of.
I just paid off my 2020 F-150 Premium!
Lots of clean FC's out here in AZ!
Make sure you are using non chlorinated brake cleaner, it tends to be gentler on paint.
Perfect timing just got home from work and now I have a video to watch
Was about to go sleep but Adam uploads. 🥺😁
I love how Adam was casually eating the whole time while revealing the car
Thanks for sharing all!
It's cool that someone caught what the bigger piece of metal in the oil was and let you know.
Make us Proud at St.Louis this weekend😊👍
The glass media or sand media will impregnate the metal not to mention its almost impossible to remove all of the media. Media blasting heats up the surface and it will get stuck in the pores more or less the aluminum then cast iron but when the engine gets warm "sometimes" that media gets dislodged and since its light gets pushed through the motor wreaking havoc. Ive personnelly had this happen to me at work, when i do engine parts i have a separate cabinet with just walnut media and thats way safer for engines. Dry ice blasting is the way to go or steam washer. I hate to be "that guy" just relayying a little info that might safe alot of headache in the future!
Sammit and L.Z both doing SR20 S15 things, we like! ✌
I love these kinds of videos . Always fun.
these sr vids are pretty good im going to be getting a s13 very soon, literally fell in love with that car cause of the cream one.
hopefully I dont get any metal chunks in the sr when the time comes
Adam can you please please podium this round make us proud
Pro car lookin good as always! Kill it in St Louis this weekend!!
Where do you get the older lowmax bride seats!? Ive been looking forever for the seats in the s15
Proud of Collete for not just using the FC and holding out for a nicer car
Did you check for oil squirters while you had the pan off? without them you have a non turbo engine.
You got a Honda paint job on your s15, the gray with the green pearl
We have a couple FC's for sale up hear in Jacksonville on FB marketplace
I hope they are the hexagonal lights that detailer use 👌👌
Idk if you know this but you can buy aftermarket sound deadening. Check out Second Skin a lot of people with crazy sound systems use it.
Like the Ford cap, Mustang in 22 ?
Your shop is so much brighter than Tommy's tbh
Those LED fixtures are going to make everything look great. Thinking you got 4000k, it’s a good white light, easy on the eyes and it’ll make all that fancy paint and wraps pop! 5000k may be too much.
Adam knows Johan’s worth, people. Chill. We don’t need 9k comments on “Adam need to …. Johan this….”
I think it’s a very subtle hint, with him wearing the ford hat is him endorsing ford, next season he will be driving the Barra Gt350 for RTR which explains why it’s been missing because it’s currently off being built to an FD standards
John or Johan…pick one damn it!!
Thumbs up just for the Ford hat. 😄 for real though all the content is 👌
I thought that was a subtle hint of things to come
Love the engine work videos.
So your basically doing a japanese street drift build, sweet 😍
You guys should try glass beads for sand blasting
I LOVE THE UPLOAD STREAK !!!!!!
Smart decision from Collete!
ADAM for everyone that watches you please build a fc!
So happy I get to go to fd in St. Louis
Love to see more SR20 content!!
Hope you put the blitz on this car with the vertex ridge kit…
Watching adam lz after school hits different
It's better when your whole country is in lockdown and Adam's video pops.
School lol
Adam am gonna build your s15 and drift it here in South Africa and say Adam LZ is the best pro drifter ever
Love the Ford hat brother..👌
Driving a RTR Mustang next year in FD
I like how she smacked her self at 17:50-17:52 😆😂👏🤦🏼♂️ lmao
Probably got the obsessed garage LEDs like Tommy... 👍💪💯🇺🇸
Are those pieces in the oil pan broke valves?
This vlog was fun 🤌🏻😊
Yep s15 is getting the sauce
Lz I think u should make a channel for shop update on the shop
What’s up with the Ford hat and you posting about hanging with the mustang guys at FD?
RTR next year
Is a built tube chassis better for drifting.
Going to fd st louis this weekend first event ever
Who knew wooderson could make cages so good…
Try mineral spirits to clean the grease off the block
Adam what gives with the Ford hat??? Do you have a mustang update soon
I think your valve cover is the same color as my Honda Civic 🤘🏻