Kinda funny how we work all our lives to make sure we have a nice life, and make sure we're not homeless. Then we spend tons of money like this to go out... and live like you're homeless in the woods. :D
The extra foam in the TV 📺 covers was a good idea. 👍 But I would have just built a large diy lightweight removable truck bed camper. But that's just like my opinion or something man...
With all those electrical accessories you guys are adding, you should probably think about upgrading the alterator for a higher current output one. I'd say at least 300 amps.
Higher spring rate springs would have been better. ARB and Dobinsons makes lift springs with upto 800lbs of additional constant load. They run between 400 to 700 for them 😂
You have to know “Ohm’s” law and “Power” ahead of your purchase of TV’s and other components. It is common practice in engineering to oversize the converter so it’s not running at 100%. Connections to waterproof TV’s should include dielectric grease so moisture doesn’t corrode them, resulting in a long happy life. Remember, from the alternator, battery to converter (DC in-AC out) take the length into consideration and size the wire properly. Once connected, test from supply to unit for voltage drop. It should not exceed 0.50 Vdc or 1/2 volt of loss. This tells you the cabling size is correct for length while the circuit is loaded. Don’t worry about negative lead or positive lead as any digital meter will show a negative(-) in front of the reading, yet correct.
Interesting build! I'd suggest doing that on a truck with a little more payload though, as you don't seem to have a lot of suspension travel remaining in the rear 😬.
Ok you guys usually do cool stuff this is the stupidest way to burn 120,000 dollars because you made a one person useless pos of a truck thats so over burdened with useless shit that its become useless
I get this is supposed to be some type of overland build but that T.V. on the side is just stupid. This show is starting to look like pimp my ride. Please get back to muscle car/trucks with meaningful bolts on.
Where are the kids supposed to set on our laps? With all the planning you try to do, you could maybe make a spot for the batteries on a removable platform?
You missed the part about it being an overlanding/tail gating rig. Never once said they it was an apocalypse rig.😂 if it was, half of this would be replaced with real NEEDS.
I would have used a large portable solar power generator along with the portable solar panels. That way it can charge from the truck 🚚 alternator but can also be moved & used elsewhere. Instead of stuck in the truck ( hey that rymes) But that's just...like...my opinion or something man.
The god dam rear suspension is almost bottomed out in the shop on level ground
All they did was a rear shock and a leveling spacer. This was just a nismo boner plug.
😂😂😂
...with 80% of equipment not really used, just wasting space.
And it’s leaning toward the driver side
pimp my ride....power nation edition
You’re gonna love all that hot air exhausted in your cab from the fridge.
Kinda funny how we work all our lives to make sure we have a nice life, and make sure we're not homeless.
Then we spend tons of money like this to go out... and live like you're homeless in the woods. :D
When you spend more on accessories then you did on the truck.
The extra foam in the TV 📺 covers was a good idea. 👍
But I would have just built a large diy lightweight removable truck bed camper.
But that's just like my opinion or something man...
With all those electrical accessories you guys are adding, you should probably think about upgrading the alterator for a higher current output one. I'd say at least 300 amps.
It looks like the date went well. Will there be a second date?
17:10 holy the back is squatting
Need some helper bags on that truck. Also how did we not get to see the TV work.
Higher spring rate springs would have been better. ARB and Dobinsons makes lift springs with upto 800lbs of additional constant load. They run between 400 to 700 for them 😂
You have to know “Ohm’s” law and “Power” ahead of your purchase of TV’s and other components. It is common practice in engineering to oversize the converter so it’s not running at 100%. Connections to waterproof TV’s should include dielectric grease so moisture doesn’t corrode them, resulting in a long happy life. Remember, from the alternator, battery to converter (DC in-AC out) take the length into consideration and size the wire properly. Once connected, test from supply to unit for voltage drop. It should not exceed 0.50 Vdc or 1/2 volt of loss. This tells you the cabling size is correct for length while the circuit is loaded. Don’t worry about negative lead or positive lead as any digital meter will show a negative(-) in front of the reading, yet correct.
Interesting build! I'd suggest doing that on a truck with a little more payload though, as you don't seem to have a lot of suspension travel remaining in the rear 😬.
I never seen a cool Nissan frontier before
I think it needs some electric chainsaws bolted to the fenders also, and some axes. And a post-hole digger.
where is the "BUMPER DUMPER"?
another looks over performance build.
Pull up nextto my campsite int he woods with all that crap I am leaving. I go camping to get AWAY form TV/computer crap
You don't camp
It’s bagged out and you call it an over lander 😂
Am I the only one that noticed how bad the body flexes with those suction cup things on the back fender?
This whole project is cringe.
Woah
The TV's are to much but the truck itself is rad
What's up with the wing in a sling? Why you gotta be so rough on the equipment?
Ok you guys usually do cool stuff this is the stupidest way to burn 120,000 dollars because you made a one person useless pos of a truck thats so over burdened with useless shit that its become useless
.camping but no tent? sleeping in the truck boys?
I get this is supposed to be some type of overland build but that T.V. on the side is just stupid. This show is starting to look like pimp my ride. Please get back to muscle car/trucks with meaningful bolts on.
You missed the part when they mentioned its for tailgating?
Isn’t the load weight on that truck 900 pounds looks like you exceeded it that truck is almost to the ground in the back
1200lbs lol but yes, they need higher spring rate leafs...they aren't even expensive
Now, 0-60 in 20 seconds, and 5 MPG and no off-road ability.
Alt. title, how to add 1500 lbs. to a new truck, and have no room in it anymore. This is a disaster, this is why there are food trucks.
Where are the kids supposed to set on our laps? With all the planning you try to do, you could maybe make a spot for the batteries on a removable platform?
Прокачайте Nissan x trail
Toyota tacoma mods
Just get an RV! Smhd
That is to much stuff.
Should've stopped after the first episode. This is rediculous.
That truck is bs wat u dun to it to protect it from a emp attack
Youve been watching to many movies kid
You missed the part about it being an overlanding/tail gating rig. Never once said they it was an apocalypse rig.😂 if it was, half of this would be replaced with real NEEDS.
😂 🎉
I would have used a large portable solar power generator along with the portable solar panels. That way it can charge from the truck 🚚 alternator but can also be moved & used elsewhere. Instead of stuck in the truck ( hey that rymes) But that's just...like...my opinion or something man.
Pointless video just buy a food truck