Honda Accord power window switch repair 2003-2007
HTML-код
- Опубликовано: 21 авг 2024
- If you can only roll down the driver side power window, but none of the passenger windows seem to work any more , this video for you! This is a common problem with the Honda master power window switch when the child safety lock shorts out. This is a step-by-step guide on how to repair this problem for free.
music by: Music: www.davidcutter... / @dcuttermusic
music by: Music by Joakim Karud / joakimkarud
soldering iron:amzn.to/2NRhbCI
Send me stuff/ products for review
Z-speed
P.O. Box 3059
Hueytown, AL 35023
Contact me: zspeed2561@gmail.com
Just here to say thank you.
You are exactly correct here, the first time I pressed the window lock button, it locked me out! Hasn’t been moved since.
This fix works flawlessly, the window lock button still works, and if you want to go above and beyond, you can put your speaker wire on either side of a 15A.
I would only add that you want to do it exactly how it is done in the video. If you go with the wrong pin, you will (and I have) blown the fuse for the whole drivers side control module.
The switch is $167 right now.
Cheers
So glad it worked for you and thanks so much for watching!!!
I found a wire connected to a 15 fuse, after I tested it, and it blew out something that now I can't start my car or lock or unlock remotely.
Looks like the previous owner put that wire what was it supposed to have done?
@@levialby3920 hope that’s not the 1 I just sold, but I would have put it there to bypass a child lock malfunction that only allowed the drivers window to roll down. If you found that fuse on the drivers door, that’s probably exactly why it was there. Sorry about your keys. What might have happened, is when you tested it, you may have shorted the 12v to a different pin, than referenced in the video. I blew my door switch this way, but the entire control unit has a fuse that I was able to replace. If the car is not starting and you’re unable to lock or unlock any doors, it sounds like you have a more serious electrical issue. I would check the battery first, then check all of your fuses, 1 by 1 until you find the culprit.
I have some german engineering now (not as cool as it sounds) and my key has on multiple occasions, disconnected itself from the vehicle. Within the manual, and a couple google searches to find knowledge gentleman like this one here, you might just be able to reprogram the key with a couple buttons and etc…
Regardless if it is programmed or not, you should be able to stick it in the ignition and start it, unless it is a remote start.
I also might add, I love hondas! The Accord is great. Everything was serviceable as far i could see. Have no fear!! Find that fuse, or that reprogram procedure, you’ll be back to button mashing in no time :D
Good luck!!
What you mean the one you just sold the car? and if it was there to bypass the child so I can get wasn't working because the windows weren't going up or down but when I replace the motherboard it's worked finally but now my car doesn't start for the reasons stated earlier.
For some reason the last owner connected the wire to the ACG fuse, that's what I think the problem might be.
Thank you! Spent $20.00 bucks on soldering kit instead of $200 on switch assembly. Thank you this worked like a charm. I appreciate the extra info on how to solder for us newbies.
So glad it worked for you too!!
Just completed the fix and all is back to normal again... I can't begin to thank you enough, you're the man!! I live in the Philippines and spare parts or replacement parts are rare if at all... I bought a switch from Alibaba for $24.00 and it worked great but no matter how many times I tried to reprogram my key fob I always had the same result which was no go...now it works just like new. I hope someone else with this problem finds your video. Again many thanks.
So glad this fix worked for you!!!
Dear Z speed, I started repairing at 3:10 pm and Was done by 4:00 pm and now its working like a brand new windows. Love you man ❤️♥️😍🤩😘
That's so awesome, free fix, thanks so much for watching!!
Hey bud, did this drain the battery,?im having this issue as well
Thank you Z speed, I have a 08 Acura TSX (1st gen pretty much same as 03-07 Accords I think those are the Accord years) well its the exact same window switch I know that lol In the 10+ years of owning the TSX i dont think I ever used the lock out button. So was BEYOND DUMBFOUNDED when just overnight all my windows went from working to only my drivers window working. I heard the clicking at all the windows and heard the clicking at the under hood relay so knew those were most likely not the case. Tried a couple Acura forums, pointless. Turned to youtube and found the original video instantly (shout out to the original kid for pinning the video to you). I just finished soldering so fingers crossed, i know i know I didnt try your pin test but im hearing everything click so the relays are getting power, hopefully its this. I wish i could attach a picture but not a big poster on you tube, ig, tic, but it came out beautiful. Putting it back together now and out to the TSX I go. You still have your Z? I had an 03’ chrome silver track model. Had to sell her due to my daughter being born and as you know, Z’s only 2 seater 😢 Ive had Honda/Acura’s and Nissans my whole life. Funny story, so I found a G35 coupe being a 4 seater, black on black 6spd with the brembos and rays wheels (Infinity’s track version like the Z) but the car seat wouldn’t fit backwards cause at the time the car seat had to be facing backwards, it would fit forwards but not chancing it with my daughter so went with the TSX. Not even a week later we were at the point her car seat could go forward, son of b****!!! lmao Oh well, been loving the TSX and playing around with the K24. Had always been a B series guy but damn, the K24 with some bolt ons, clutch cylinder and master cylinder upgrade and the K Tuner, wow. Night and Day. Anyways thank you for this video because even my buddy at his salvage yard has trouble getting these master switches cause they go instantly and even used are expensive, and could have the same problem. So thank you for the video! Cheers!
Let me know if it works for the TSX, it might help someone else out!!!👍🏁
Sir. Thank you from the bottom of my heart!!! I don't have extra money and I don't know anything about cars. I've ride around with my windows stuck up (all except my driver and sunroof) for 2 years now. I have kids it's been so hot and hard. This year I finally decided I needed to figure it out. Your video just changed my life 😅 thank you!!!
So glad it worked for you too!!!😗💯👍🏁
Have to say.. I found the jumper hack between the two wires a few years ago, but since car sits a bit, a parasitic drain on the battery forced batteries dying too quickly. This fix was perfect and was straight forward to execute just like the video. Worked like a charm. Thanks so much!
Thanks so much for watching!!
Just use this in july 2023 and I worked thank you so much I just pray and hope it doesn't curse any issues later but for now its working perfectly well thank you so so much 🙏
Wanted to thank you! Was about to get on my son for not taking good care of his car as I always try my kids to do.. all three of his other windows weren’t operational other than the drivers side window.. huge downpour coming and was able to get his windows up with your help. Now HE WILL ORDER and Pay for the $75 replacement price off Amazon and replace within a week. Thank you very much for your efforts
Thanks so much for watching!!!
Thank you! I rarely, if ever, used the child lock for the windows but my husband borrowed my car to drive out of town and hit this switch and the passenger windows haven’t worked since (but they still click). I have been looking through all of the different fixes for this problem for months trying to decide which one I want to do and this is the best! I don’t want to purchase a new genuine part or even a used one because this is a VERY common problem which should be a recall so it seems like a waste of money. There are too many issues with buying a generic switch as well and jumping the 1 and 3 wires seems to be a drain on the battery so this is fantastic! I am going to order a solder kit and I will update after I complete this fix. Very thorough instructions too which is much appreciated!
Awesome, you have definitely done your research, let me know how it turns out!!👍💯
The same PCB is in the 2006 Honda Odyssey. Thanks for sharing the jumper points!!! Nothing like a 30 minute free fix for something that could have been an expensive nightmare.
Awesome, glad it works on the Odyssey too!
you are the man sir. its bcause of people like u that makes youtube work awesome. thk u god bless
Thank you so much for watching, glad it worked for you too!
I have to say thanx, I've looked over a lot of videos but yours was the best and very easy to follow. Now my windows work.....once again thanx for the info.
Thank you for watching and I'm glad you were able to get your windows working again!
Thanks for the video! I just fixed my wife's 2006 Honda Accord. Your video was very thorough!
Thanks so much for watching!!
Appreciate this repair and video of your explanation sir. Helped repair an annoying issues on an old vehicle. Have a solid day!
Thank you.
This fix works flawlessly, the window lock button still works
Thank you so much for watching!!
Thanks so so so much Z-speed for the video. I didn't really know what to do when my Accord power window switch stopped working. So lucky to find you here. That trick really works!!! You saved my time and money and gave me now a piece of mind. Thanks again.
So glad it worked for you and thanks so much for watching!!!👍💯
Had the same issue, repair worked great for me. Mine is the 35750-SDA-A14 (EX model) which is most expensive type. Would like to clarify that jumping pins 1 & 3 (Black - Wht/Grn) is only good for testing; it will keep the relay energized constantly and can drain you battery if left that way. Did this repair for a friend who got it from a used dealer that did a bunch a quick hacks like this to get it ready for resale. Took me better part of a day to find the parasitic drain and that quick hack was the culprit.
Thanks for the information and thanks so much for watching!!!
This repair worked for my 2007 Accord. Thank you for the post!
Glad it worked for you too!!!
THE OTHER VIDEOS ON THIS ACCORD PROBLEM DONT ACTUALLY SHOW HOW TOO ! YOUR VIDEO IS PERFECT SHOWING STEP BY STEP THANK YOU FINALY ...THANKS !
Thanks so much for watching!
It worked great for me! Thanks! I thought this was a bypass for the child safety switch but it works normally. Saved me a ton of money. A new switch is very expensive once you add in programing the keys.
You actually don't gotta pay to reprogram the master switch. You do for the immobilizer but there's an in car procedure you can do yourself to program the fob to the new master switch. Works better if you have 2 keys tho.
Thank you sir .. I have the same problem .. I benefited from the video and applied it to my car and it was successful today .. Thank you from the deep of my heart
So glad it worked for you too!!!!👍
Yes you are the man as it looks like 150-225 for new switch. Thank you so much.
So glad it helped you out, thank you so much for watching!!
Worked great and interestingly, the child lock switch also still functions exactly as it should!
Awesome, thanks so much for watching!
I am stuck in this thing.
My power motor was not working.and its expensive.butt i see your post i was impressed with your video.
Thankyou sir...
Thank you for watching!!!
YES IT WORKED! SAVED ME 30 OR 200 BUCKS
Thanks so much for watching!!🏁💯👍
Had my son fix mine . Worked great !! Thank you
Glad it worked for you!!!!👍👍👍👏
Thank-you that really worked good!
Saved my but!
No job right now
Stay positive, things will get better, never lose the faith! Thanks so much for watching!
Thanks for the video just finishe fixing my windows switch works like new without problems ........Monday June 22 at 9:46
Awesome, so glad this fix worked for you too!!!
It works!!! Great video my man!!!
Thanks for that video! Worked like a charm! Have to have steady hands for sure 👍👍👍
Awesome, so glad it worked for you too! Thanks so much for watching!
Thankyou!
Excellent & helpful tutorial video!! Watching & supporting in full!!
Thank you so much for watching!!
Hey Z! This was an awesome fix and it worked on my husband's 2007 Honda Accord! However! He can't lock it with the fob anymore and also his blinkers won't work. Do I need to reset the battery? :) Thanks so much for helping two broke kids out!!
Yes a reset, but it shouldn't have had any effect on your blinkers, check your fuse boxes for blow fuses!!! Don't forget to subscribe and thanks so much for watching!!
Hello sir. Thank you very much for making this great video. I followed the instructions in this video step-by-step and everything almost worked well. This is why I say almost;I said almost because all of the three windows that were not working are now working. The problem I’m having is that the master control is no longer working; therefore, my driver side window which was working is no longer working. Also, all of the three doors cannot be opened with the master switch. I have to open them individually. Do you or anyone reading this have a suggestion that would help me out? thank you very much for your help.
Sounds like you might have bridged one of the wire post next to the wire that you soldered on the circuit board. Check your master switch solder job for flaws, like bridging the post next to the area that you were working on! Hope this helps!
Happy Sunday great information 👍 tfs
Thank you so much for watching!!!!!!!
I just did this and it works. I tested for parasitic drain and I got 10ma. Much less than the maximum 50ma.
All the switches go off as supposed. The remote all windows down works. The keyhole all windows up and down works. This is a perfect fix.
No battery drains at all. I'm so happy.
Thank you so very much for watching!!!Glad it worked for you too!
Will that Master tiny button will lock down the windows when its pressed down ? ? ?
Yes, it will lock all windows except the driver's window!
@@ZspeedThank you so much my dear friend for your very very quick reply.
That jump won't create a parasitic drain to the battery?
Awesome. Im doing it
I am about to attempt this repair and have noticed some traces on the pcb between the solder joints are etched away. Is this the continuity gap we are trying to bridge?
Muchas grasias😁 me funcionó muy bien👌
This worked amazing, thank-you very much...appreciate it....respect
Thanks so much for watching!💯🏁👍
Thanks body, was a great help.
Great job God bless you.. God bless America
Thank you so very much!!!!!❤👏👍
Thank you so much, worked perfectly.
Thanks so much for watching!
I have an 2006 Honda Accord and have the same issue. Only driver side window works. Able to hear the clicking on the other 3 windows but they don't move. Would replacing the whole master switch itself solve this issue?
Yes, that should do it!!!!
Great information thank you for sharing this
Thank you so much for your support!!!
Nice video.
Please does the rest of the window switches remain powered after removing key from ignition? Or do they go off with the master switch?
Staying on is what drains the battery.
Please I need this answer before I try this.
Thanks
All switches turn off with the master, no battery drain!!!👍
Great explanation... My Accord 2007 doesn't work auto UP Down. The master switch is 35750-SDA-K14. Do you have some concern? Thank you!
Worked!! Thank you!!
It seems that I have this same problem, but with a 2004 Honda Pilot. I’m going to take it apart and see how I can adapt this technique to my car.
Awesome, let me know if it works for the Pilot too!!
Does anyone know what gauge he used for the wire? Or what gauge is good to be used?
Smaller is better for this application, 16 gauge or smaller!
Great video. If you just leave the jumper in at the connector it drains your battery. If you solder motherboard will that solve battery drain?
No problems with battery drain after 6 months of use! So I am going to say yes, problem solved!
Thank you so much for watching!
Nice video.
Please does the rest of the window switches remain powered after removing key from ignition? Or do they go off with the master switch?
Staying on is what drains the battery.
Please I need this answer before I try this.
Thanks
If you solder it correctly there should be no problem with battery drain after removing the key from the ignition! Thank you so much for watching!
Only three days and my battery is dead
Im from malaysia......this video help a lot. It even work for right hand drive car. Tq very much.
Thank you so much for watching!!!!
It worked for me it’s an easier way to do it just stick the wire in and take it down
You used speaker wire. Does any wire work? Could I cut an old phone charger and use a piece of that to do this?
That should work just as well!👍👍
This video show me I can just replace the motherboard now my windows work thank you!
But in the process when I tested by bypassing the circuit my car shut off and now my car key no longer starts the car as I don't know what to do, anyone's got any ideas please...
Hey thank you so much. None of my windows work, but when I tried the test to see if it would work all but my driver side rolled down. What should I do if my driver side window and lock mechanism doesn’t work?
It might be as simple as a bad fuse, there is a fuse box by your left foot on the drivers side and one in the engine bay, check your owners manual for more details. If it was just your drivers window not working, I would say try replacing your window regulator! But, since your locking mechanism is not working either, it could also be your drivers side lock actuator! Hope this helps and thanks so much for watching!
@@Zspeed thanks for replying. How do I know if the fuse is bad? Also which ones should I check to makes sure?
After you remove the fuse, just look at the bottom end for any broken parts. If the fuse is blown, the metal tab at end will be broken.
Check each fuse it the box by your left foot on the driver's side!
Hi there, I have the same issue with my 01 civic. Are you able to find out which wires that I can jump with?
Great video btw. It worked for my brother in laws accord.
Sorry, not sure about the 2001 Civic! Try getting the wiring schematics, that may help you figure it out!
Thanks, it worked.
Ever since I replaced my master switch, I haven't been able to get my keys to work for locking and unlocking the doors, I have reprogrammed them several times but they aren't working, any ideas, please??
Yes, it's the main reason I decided to just repair my old master switch instead of replacing it! A lot of people a having the same problem that your having, they are unable to get their key fob to sync up with the new master switch module. After doing some research, I found out that the new master switch must have certain serial numbers that must match your old master switch numbers. If not the key fob will not sync properly. If you still have your old master switch, check the serial numbers and try to order one that matches. I couldn't find one for my switch, hope this helps and thanks so much for watching!!!
@@Zspeed Thank you for the reply, I suspect you are right and it makes sense, don't remember what I did with the old one but I'm going to look for it, thanks again for answering. 👍
FYI: It may not be the actual push button switch but rather the control circuit from that switch. The symptoms on my Accord exactly the same. I took the actual switch apart and it was just fine. So in my case it was the control circuit. What circuit are you actually jumping?
just bypassing the child safety switch!
how you bypass child safety lock switch ?
Follow the steps in this video!!!
Great video!
Thank you so much for watching, I hope this video helped you out!!!!
Mr. Z, thank you for your video; I have a 03 honda accord and my problem is that the two front windows work, but the two rear windows don´t!! do you think that nice quick fix would work?
Test it with a piece of speaker wire, if it works then you know the fix is good!
@@Zspeed Than you much, for your prompt response! I´ll do that and get back with the news, 👍👍
Awesome video bud. I wanted to ask, i seen some using a small paper clip cut to the correct size and placed one end into the first black cable and the other end onto the 3Rd wire slot and push it in, looked lik a perfect fit and everything worked as in this video, question is, will that caise any other type of damage if done this way permanently?
Not sure if it will cause a parasitic drain on your battery or not! But I think it's worth a try because it's so much easier then soldering. Let you know if works and thanks so much for watching!!!
@@Zspeed thanks for the reply, i forgot to ask if your method has caused draining or anything weird since?
No problems with the battery or any other electrical system, get free fix!!!
so useful. thanks and looking forward yo your future diy's. 👍👍👍🍻 cris of Manila
Thank you so much for watching!
Just did this and it worked! I know its been a few years, but have you noticed the battery dying if the car sits for awhile after doing this?
No parasitic drain noted with this procedure!!!!
Curious what was the root cause of this malfunction to begin with?. Why would shorting the two terminals fix this issue?
They should have had a recall on the master power window switch, so many people with the same issue! Problems with the child safety lockout button.
I’m wondering are those carbon fiber trims came from 06-07 Accord SE? They look really nice! Do you mind to tell me where to get them? Thanks
They came that way from Honda, check Honda aftermarket parts websites, you might find them there! Thanks so much for watching!
@@Zspeed Thanks. I just found out that yours is a 06-07 Accord by looking at the gauge cluster
I have similar issue on my Honda 2007 accord. i should try this tricks.
It works!
Does this drain the battery over time?? Or has that happen to anyone that tried this?
If you do the Procedure as shown in the video, there will be no parasitic drain on the battery!
I stuck a bobby-pin in #1&3 with electrical tape on it it’s not falling out so I just left it. Is there really a need to solder the wire on? Everything works even safety lock. Is there a way to fix the board or ground wire not sure why it doesn’t work with out jumper. It seems no switches are broken cause everything works with jumper in.
You can use the bobby-pin, the master switch boards are faulty, they should have had a recall! the only fix is to solder the wire on the board are replace it with a new one. Hope this helps you out!
Hey brother so I had a problem with my master switch and I went ahead and got a new one and everything works perfectly but my only issue is my Key it won’t lock or unlock the car thru the bottoms I gotta do it manually now and before with my all master switch I was able to lock and unlock the car I have the same Car as you fixed on this video Accord 07
That's the main reason I didn't purchase a new master switch, because you have to have a certain serial number to match up with your key fob or it won't unlock your door remotely. So that's why I decided to try to fix my original master switch. Do some research and you may be able to find the correct master switch that correlates with your Key fob, good luck!
The dealer has to reprogram the master switch to your keys. That master window switch set-up contains the RF receiver for the remote.
Thanks for the information, any idea how much that would cost! Thanks so much for watching and don't forget to subscribe!!!
My back passenger window switch was pulled up too hard. I saw a spring fall out. So now I have to hold it up a certain type of way in order to keep my window up. Do you know how to repair the back passenger window switch I have an 03 Honda Accord
You should remove it from the housing, and look for any easy or obvious problems that might be simple to repair! If the problem is not obvious, replace the entire window switch!
your so amazing and smart.
Supporting your channel @Z-speed
what do you do when none of them stop working all of sudden. I went out to the supermarket, parked, and wanted to roll up the window but boom! all of them rolled halfway and stopped. I haven't been able to roll it up since yesterday. Please help!
Check ✔ all of your fuses, could be a bad one somewhere! If that's not the problem, try the method on the video it might fix the problem!! Thanks so much for watching!
I have a similar problem but my two rear windows work and my two front do not work, when I press ether of the front switches there will be a clicking noise so they are receiving power.
will this method also work with my problem ?or was this fix specifically for 3 failed windows with the driver window functional
thanks for any help
Try the wire test, this will let you know if it's your master power window switch or you just need to replace your two front window motors!
Ya say phillips screw driver, when in fact there exists JIS or Japan Industry Standard, looks same but not. Fits better if ya get the right one.
Hello, I have the same issue. Where my driver side window works but my front and rear passenger windows do not roll up or down but they make a clicking noise. Could it be the main switch needs to be replaced or the individual switches in the doors?
The master switch needs replacement!!
Thanks for the help and video!
I have the same problem on my accord but the opposite lol all windows work except for the driver window. Do you think this would work for me?
You might just need a new drivers side window motor! But you can try the wire test just to see what happens. If the test fails, you most likely need to replace just the your driver's side window motor, hope this helps and thanks for watching my video!!👍
Followed your instruction, but the problem is: the master switch's still working with all the light indicators ON even after removing the key, I think it will drain out the battery,
Yes, it should not stay on with key removed, disconnect the switch, somethings wired wrong!
@@Zspeed thanks for your reply Z-speed, I discovered that if I opened the car, and leave as usual, the switch turned off as normal, yesterday I was sitting in the car , removed the key and check right after that, I did ask my friend to check if he can roll down the car with the key removed while still sitting in the car, and he cannot do it for his part. I dont know that's would be a problem or not, but I think I'm good now, will see how it goes in the next few days. anyway, thank you very ,much for your useful tips, at least I get all of my windows work again. Cheers!
Easy fix right! Thank you so much for watching!
Hello, I just wanted to know where I could buy the wires used and what kind specifically, thank you in advance
Actually, I was just using old speaker wire that I had lying around in the garage!! Just make sure that the wire gauge isn't so large that it fuses the wire post next to the one you're working on! You might need to experiment with different gauged wires. Hope this helps and thanks so much for watching!
What gauge wire did you use during soldering the circuit board? Or does it not matter?
If you have any speaker wire laying around, that should be about the right size!!
hey, I know this video is a couple of years old but my passenger side window has never worked in my 05 accord coupe ever since i got it in 2018. by chance did the relay on the non-working window switch make a clicking sound when trying to roll up/down the window? that's the problem I'm having
I think it did make a clicking sound, try the test with the speaker wire. If that does not work, then you might just have to replace the window motor!
@@Zspeed sounds good thanks man!
Now I know wo to call if mine fails!
That's right just call Z-speed!!!
So my 07 honda accord is doing same thing. So how do I know for sure witch ones to solder
Watch the entire video, very carefully! This video covers all your questions!!!
What happens if one of my wires to the window power switch is broke ?
You should solder the wire together! Thanks so much for watching!
does that retain the abilty to put the windows down with the remote?
Yes, this should not affect your remote! Thanks for watching!
@@Zspeed thanks for replying
How do you do that?
Omg @z-speed you have an overwhelming amount of comments , my window just won’t go up but I here there motor would do you think is the problem 😅😬
Witch window are you having problems with?
Should this work for a 2007 Honda Odyssey as well
If the wiring looks the same!!👍
Could you just jumper the two wires at the plug...my wife's car is having this same issue..
I'm not sure if this would bypass the child safety lockout button, but you can give it a try!
My issue is my driver window. I have bought countless window switches because I was told that was the problem but none seem to fix the problem. My current window switch works on all windows except the driver window. Please help. I drive a 1995 Honda Accord LX.
Sounds like you may need to replace your window motor and regulator! Does your driver side window mover up or down at all? Sounds like your switch is okay if the other windows are working. There are some fuses down by your left foot in the cabin, check those" there is a RUclips video on that. Let me know what happens, hope this helps!!!
Z-speed The driver side window doesn’t move at all
Yeah, sounds like it's time to replace your window motor! Not to hard, hope this helps!
Z-speed thank you I’ll change it and let you know what happens
Awesome, hope that fixes the problem, let me know!👍🏁
Is this master switch the same (exact fit) for a 2006 Acura TSX ?
Ask your local Honda dealer if the master switch is the same as a Honda Accord. If they say it will fit, then this fix should work for your TSX too!
He zz!I have es 330 lexus 2004 .what can I do with connection wires?
Witch wires are we talking about?
What about whit the batery after this job still work?
Battery working fine 🙂!
I have lost my button spring .. can i solve it .. i mean can i replace the button spring ?
I have never taken the button and Spring apart, but it's worth a try! If it can't be fixed, you should be able to buy a new one!
@@Zspeed many thanks .. for your reply ... I'm glad to you 👏
How to fix the Moto on the wiper for a Honda Civic
Sorry, I don't have any videos on how to repair a wiper motor, but I would just replace it with a new one! Thanks so much for watching!
couldn't the 2 wires in the harness just be jump together with the same result???
Maybe, give it a try. But it might cause a parasitic drain on your battery!
How do I know which post to connect on a 2000 Honda accord
I have never done a bypass on a 2000 Accord, sorry!
@@Zspeed I figured it out thanks.
Can you do the speaker wire trick and call it a day?
There is a possibility that the wire trick could cause a parasitic drain on your battery 🔋, but you can try it and see 👀 what happens.
Could you use something other than the cord