Fully 3D Printing & Building a Morgan 3 Wheeler Model kit with a Creality Halot-One Plus
HTML-код
- Опубликовано: 1 окт 2024
- Visit my Webshop for lots of the tools paints and other products used in the video!
✖ www.thescalemo...
Creality: www.creality.com/
store.creality...
Olivizzle: cults3d.com/en...
Eryone3D: eryone3d.com/
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.co...
✖My Amazon shop for US viewers: www.amazon.com...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemo...
www.thescalemo...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by RUclips Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
3d printers, the ultímate weapon for modellers
They also make it possible to 3D print molds to cast your own rubber tires using clear silicone ruclips.net/video/X62rLgvMO5Q/видео.html
Very cool, I just got that kit and built it! Really fun build. 👍👍🙂
An incredible model and you've done it justice.
Another really cool project! My fav part of the whole build was those front headlights, you did a really awesome job with those! ❤
Fantastic! It does baffle me that some people say "3D printing will be the death of scale modelling". Personally I think it's just another tool for model makers to use :-)
100% agree with you there, not even close to the death of modeling
I was thinking the opposite. 3D printing will be the renaissance of a new wonderful age of scale modeling in ways we never imagined.
It's an extension. Now you can expect much more extended variation of models to build.
Couldn't agree more!
Your videos are really tempting me to get a resin printer...
I saw a Morgan 3 wheeler on the road a few weeks ago - they are crazily small!
WOW! Great build and awsome result! Congrats!
on flick
Very Nice 3d Print and paint, thx for your Video
So you clear coat the headlights and taillights all the time or just or certain ones??
How is the durability of 3d printed parts compared to normal plastic kits. It the resing stuff durable. Do we increase wall thickness for resin parts.
Its a little more brittle/not as flexible
I now have to always use gloves.. its a sensitivity thing,, I get white blistules on the sides of my fingers for a week after even touching resin .. Please learn from me, and WEAR GLOVES .. I'm so impetuous that I often forget , so I have a label on the printer with "WEAR GLOVES" in bold text .. it works !!
WOW you make it look so easy. You did a great job. Thank you
WEAR GLOVES, I had to give up resin printing and sell all my gear because I got severe blisters on both of my arms from minimal exposire
Imho, 3d printers its a future of scalemodeling! All you need....3d printer and skills of 3d modeling. And you can create any scale model whatever you want.
I love my 3d printer I built it myself can't afford to buy what I wanted already built and also built my own huge resin printer as well. But my biggest helper in my hobbies is my laser cutter I can cut from thin paper all the way up to thick hobby grade ply wood and some very thin aluminum sheeting I love it for cutting out flat parts from styrene sheets and etch the rivits and details into and can also cut roll cage jigs with it. Etch the sub assemblies of the roll cage onto a piece of thick sheet plastic and lay down my styrene rods and cut and fit and glue in place and it's the most accurate and fastest way to make roll cages and any type of tube chassis out of styrene rods and tubing and square stock ECT. I did a whole copy of a asphalt super late model chassis by etching the layout of it into the styrene sheets and I was able to cut all my stuff by hand and have a very accurate and exactly out measured tube chassis so I can build this dirt late model and asphalt late model for somebody that I commission buildings 124 scale
Hi. Where did you buy the spray paint gun? I've never seen such a small one.
Www.tsmc.shop
it must somehow be possible to redissolve the plastik and reuse it
that word is pronounced HAL- LOT like SHallow Hal the movie.
Pure gold. Got any idea if this paint works fine for PLA?
Its paint fros plastic too. So should be fine for PLA if prepped properly
Perfecto, i have seen the pictures on Instagram. It's realy realy beautiful.
👍
P.S. - Where did you get the 3-D model of the car?
links are in the description of the video
Very very very beautiful...thanks for sharing...regards
Hi great video, I purchased a Halot One Plus and the Creality UW-02 curing station.
Just wondering if you coud provide a link for the stl file for the Morgan 3 Wheel Kit.
Looked at all your links which by the way is fantastic but no link to the actual model.
Blessings
Pastor Randy Bourque
Its the third link in the description
Olivizzle: cults3d.com/en/users/OliVizzle/creations
@@TheScalemodelingChannel Thanks for the really quick reply, I guess they took it down as there are only two models there but no Morgan.
Thanks again.
Blessings
Pastor Randy Bourque😀
@@randybourque3327 just asked. It will be back online in a month or so
Nice review looking for something like for myself
Unfortunately the model has been taken offline. How can you download this model?
If is has been taken offline, i’m afraid you can’t
Are you in contact with him at all? Wondering if I can buy direct. Your video inspired me to get a printer. I added the model to the cart last month, and returned to the cart to find it is gone 😢
@@CiaranWhelan maybe you should contact him?😜
Damn dude this is cool!! i need a printer for transformer parts lol gotta fixem alot
Amazing!
awersome!!!
Shmee150 would love this..
I have also done Oli's Morgan and printed it with my Halot 1. I upscaled it to 1:18 however. I too found I had problems with the fenders on the engine piece a d had to reprint it many times :/. A great model though.
Resin printers are really cool for the level of detail they can achieve but they're rather a pain to clean-up afterwards & in terms of general safety
That is really freaking neat I have always like the 3 wheeler. great job on the build as well. Why no P51 shark mouth decal :) saw a 3 wheeler like that once. anyway awesome printer and great builder as well.
I had no idea sanding/polishing sponges existed!
This is so, so good. But how durable is this resin? I've heard stories that models made from photopolymer resin tend to wrap under heat, under light, under gravity, well, under anything after a year or so.
The models i have printed still look the same as when i printed them. Just make sure it is cured properly and paint it, so it does not keep absorbing the UV
*not an expert. Just my experience
1/100 mm layers. That's amazing. How dimensional accurate is it ?
1'st time viewer of you channel, and would say your level of details is crazy.
I’d say 98% accurate
That sound of removing the part from the supports is super satisfying. Tamiya has become my go to primer now. Always leaves a super smooth finish unlike other primers ive used.
i think a Filament printer can do the job way better and have way more options, like the tires, you can print them in rubber, has for the resin printer you can only print in plastic
3D Printing Flexible Rubber Like Tyres for Your Scale Models with Resione FX60 Flexible Resin
ruclips.net/video/mnsalucQ9S4/видео.html
One of the most fun cars I've driven :)
I like that you built up the model to actually show what can be done with just simple, easy and minimum work.
I still don't understand how it "prints" upside down from a pool of liquid
To make it fairly simple.
The screen shows an image. This cures the resin. Then shows another image which cures the resin. And it just keeps going layer by layer
I would love to see it done up as the one richard hammond used in an old ep of top gear - it was done up as a spitfire
amazing detail painting work ...
WOW! That Morgan came out sweet! I Love it! How is that Tamiya Craft bond? Is it better than Modpodge?
I’ve never used modpodge. So couldn’t day
Do you do trans kits?(wide-body)for the older JDM cars? If so how much are they?
I do not design anything. I just print available files
Nice build, very impressed with the results. 👍
Piece of art!
WOWSERZ 😱😱😱😱😱😱‼️
Are there feet on the bottom of the vat to keep the fep from touching a table surface?
This machine does not have those
Super great Work.
Impressive! Could you make Fast and Furious car body kits with you 3d printer to sell in you website? Thanks!
If someone would make the files, ready for me to print, sure!
@@TheScalemodelingChannel I hope someone give you car files!
Fantastic!
I have Halot One "normal". What slicer do you use ???? Thanks
Chitubox
@@TheScalemodelingChannel Thanks !!
Супер!!@
Got a link for the model?
Yes. In the video description
cults3d.com/en/users/OliVizzle/creations
@@TheScalemodelingChannel ah thank you. Wasnt labeld with "model used in video" so i couldnt find it.
Great build from a great looking file. What tool did you use to cut out the dash decals?
Hole punch
WOW X100!
Do you live in America
No
@@TheScalemodelingChannel you are a very talented individual where are you from if you don't mind me asking
Nice job 👍
Awesome work!
That's great!
Great video, im just amazed with these printers and of course your builds are excellent and complement these printers even more! Thank you!
Beautifully done! Love it.
Качественная работа. 👍
....veľmi pekné!👌👍
Great results there!
What settings did you use for this resin? I can't get it to work, it always warps for me on bigger prints... Cheers!
Just the standard settings in chitubox. With 1.5seconds cure time per layer
use lychee slicer its free and better.. 45 seconds for intial 7 additional 5 layers 3 seconds wait time 1mm speed and thats it i have the same printer also use rain x winsheild stuff wipe it on with lint free rags i use 300 count rags from walmart let it dry wipe it off and never never leave resin more than 1 day in the vat those covers are not uv resistant it will harden and you will ruin your fep film get extra films get lots of is0 alcohol glasses gloves tooth brush and you should be set and a wash and cure station just stick the whole print in the wash first let air dry 10 minutes wash is good then uv cure for 10 on all sides that cant see the uv light and then take off supports use glasses that shit shoots off trust me got one in my eye one time... ive had perfect prints with my methods above the stock slicer sucks and chitubox well for me is weird the other one i mentioned is better and make sure to detect islands before prints its a great slicer
Beautiful little model. I'm not sure about the non-gloss body, but I'm super- impressed by the quality of detail achieved by the printer and the great work done by the software designer.
Great job! What glue did you use for the glass?
Tamiya craft bond
Hey the scalemodeling.Can i ask you a question.Is tamiya model car can open doors and working steering system
There are some models with doors that can open. But not all of them
Does it have moving steering wheel
@@Teddagamer-m5s no
@@TheScalemodelingChannel ok
@@TheScalemodelingChannel hey,can you build lego technic ferrari daytona sp3.Its easier than tamiya
What slicer did you use for this printer?
Chitubox
@@TheScalemodelingChannel. Kool. I still have my old LD "H" model. lol Was looking at this printer recently but not sure about a cloud based slicer.
@@Bob0sModelFabWorx no need for a cloud based slicer on this one. Chitu works perfect
@@TheScalemodelingChannel. Glad to hear it. The Creality web page was showing that slicer so must be an option. I prefer anything non-cloud based. lol
Stopped watching as soon as you touched uncured resin without wearing gloves. That's such a bad idea.
I know. Thats what i said, exactly when i did it.