After typing clean, I get: DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information. What do I do? It's still locked!
I got the I/O device error too. My solution was ridiculously easy for my micro SD card. I initially blew off the physical switch-idea since I didn't find it anywhere on the micro SD card, BUT there is a lock/unlocking switch on the ADAPTER I use for my micro SD. It was as easy as putting my card into my adapter, pushing the switch, and then connecting it back to my computer. I'm a tech dinosaur so I didn't even think about my micro SD adapter being my solution. Hopes this helps anyone struggling with the same problem!
Wow !! Thank you ! i tried everything every kind formatting and did not format my 1 TB HDD . Thank you ! this was all operation for me! 1.... DISKPART> select disk 3 2.... Disk 3 is now the selected disk. 3.... DISKPART> attributes disk clear readonly 4.... Disk attributes cleared successfully. 5.... DISKPART> clean 6.... DiskPart succeeded in cleaning the disk. 7.... DISKPART> create partition primary 8.... DiskPart succeeded in creating the specified partition. 9 ...DISKPART> select partition 3
10 ...The specified partition is not valid. Please select a valid partition. There is no partition selected. 11.... DISKPART> select partition 1
Thank you for this video! I have been searching everywhere on how to write to my readonly ext HD and this finally did it! I couldn't partition or format with cmd for some reason but it appeared in my disk manager where I was able to format and assign a drive letter. Now i can read and write to my HD!!!
Thank you! This was actually so useful as i was looking how to do it from the cmd,unsuccesfully , but you pointed out that some devices have a physical lock, you made it so easy.
These methods may only work for those who's USB drive been write protected on the PC they are trying to unlock it, or if only attibutes read only are set. But if disk Write Protected on other PC > NOTHING OF THIS WILL HELP.
after clean command it display error-DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information.
No usable free extent could be found. It may be that there is insufficient free space to create a partition at the specified size and offset. Specify different size and offset values or don't specify either to create the maximum sized partition. It may be that the disk is partitioned using the MBR disk partitioning format and the disk contains either 4 primary partitions, (no more partitions may be created), or 3 primary partitions and one extended partition, (only logical drives may be created). What is this means? This was at the created partition part
attributes disk clear readonly command run successfully... but when i run the clean command it shows like "DiskPart has encountered an error:The request could not be performed because of an I/O device error. See the system event log for more information."
For me the problem is the microsd card itself is locked in that mode. The switch does not work and neither does just using the microsd card itself without the adapter. I have ordered a new card, but still would be nice to see if I can salvage this one for my second 3ds
If the card adapter has a notch but no slider switch it will only register as "write protected". A command prompt sequence will not cure that physical error because the computer mechanically reads an empty notch as "read only". However, you can put a piece of tape over the notch to cure the problem.
My dumbass also fell for that one. Didn't even know it was for that use. I thought it was to keep the micro sd in place (I use a sd Adapter for my micro sd)
This SD card came from a old SONY cheap handycam. I have tried your method many times. I get this when I type Clean. "DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information."
Very helpful! I hit my phone against a metal pole while handing it to someone, and the card would not save photos or videos properly afterward, this has made it so i can at least delete stuff after backing them up.. i will check if it works properly in the phone now.
Amazing video. I was just meaning to send the micro sd card to sun disk and get another new but i would have take 1 mounths. after watching this video and using the prompt command the card was unlocked thank you so much
I got the "DiskPart has encountered an error message". This is what worked for me: Flip the switch on the SD adapter/card to the LOCK position, then go back to the UNLOCK position, and try again. For some reason, it was stuck on "LOCK" when it was already unlocked. And this was brand new from the supplier.
What are the typical causes and solutions for "Data error (cyclic redundancy check)"? This error appears whenever I attempt to "clean" the SD card or if I try to create a primary partition.
I had to attach a Virtual disk file as part of the original partition. Also located the disk location through the properties section in my computer. Came up as Location 0. I’m able to pull files directly off the laptop folder onto the SDHC Card now. Lovely Jumbly
The shell I put my micro sd in had a broken switch which made it so that it couldn`t format the card because the switch would turn inside me computer. Put it in a different one and it worked. Thank you!
@@forget6917 Not the same thing.. We are all getting the same error message when trying to "clean" our Micro SD card via diskpart console.. so yeah, this video is useless.
Yeah so I did everything you said one that SD card and it did like it (Gave me an error) so I tried another one and the 2nd one worked. That took time and then me using my old PC (cause that was the only pc I had that has an SD card reader) it took me hours just to format a SD card. Sad isn’t it. Yeah I am so glad I got a new PC and I am waiting for a SD reader adaptor. Thanks for the video. I didn’t know you could do this on an SD card.
If clean command dose not work the reason maybe the drive is unallocated. To fix this go to disk management and right click and allocate it. This might work
DiskPart has encountered an error: The request failed due to a fatal device hardware error. See the System Event Log for more information. What I have to do now?
For those who get to like the format fs=fat32 quick or just before that and get something about it still be write protected. Do window+run and type in regedit. This should open up registries and from there you look for HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies. If you don't have a StorageDevicePolicies create a new folder by right clicking and click new->key. After that right click in the white section of the area and make a new->DWORD and call it "write Protection". Inside that set the value to 0. Save it and restart your pc and when its booted back up reformat you sd or whatever that was write protected. This worked for me.
I have been successful in deleting the files. It works for SD or Micro SD. Just use a USB adapter or card reader that supports multiple types of cards instead of the Card Adapter that looks like a card. Such adapters don't get blocked by the computer. Then delete files entering into the drive directory, not from outside of the drive directory. It worked guys
I tried the Command Prompt but when I hit "clean" it gave me the following error: "DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information." Not sure if you know of a solution for that. Great video regardless!
Quick tip: for all of you that, upon typing "active" got the message "The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks." do the following: 1 - Download a prtition manager (EaseUS, for example); 2 - Wipe all data again; 3 - Create a new partition 4 - Done :)
Or you can right click on This PC (Win7) and click manage. Click on disk management. Find the disk number and right click it and format. For Win 10 just right click the windows button and click disk management.
Though I followed the instructions, I still cannot edit the files in my SD card. When I list the disk attributes, it says the following: Current Read-only State: Yes Read-only: No Needless to say, I am very confused and would appreciate any help if possible.
Thanks for the video. It worked fine. However, when i formatted my memory card by this method and used in my digi cam it is showing Memory card error. Any way out from this problem?
Reformat it by the digi cam We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
i got this error - what to do? DISKPART> clean DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information.
@@ksmakbani you cant be serious lmao dont you think we have tried this also that method doest work with a micro sd card that doesnt have a slider my guy
@@ksmakbani Because you started it with assuming the original poster was an idiot who couldn't find a switch after viewing the video. I see you making the same post to others here, and it is not decent.
For those of you with an Samsung evo card that still isn't able to access the card. For some reason the card functions properly when you plug it in directly, but you are unable to write when you use an sd card adapter.
My man thanks a lot, it worked, I had to complete another format disk with the code format fs=fat32 it took like 1hr and 30 min to complete but it worked eventually.
getting error DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information.
Type "clean" and press enter... "Diskpart has encountered an error: Access is denied. See the event log for more information." Chebus...is this REALLY this difficult?????
I'm stuck in DISKPART part. Everything was same like in the video, until it turn out like this : DISKPART> select disk 3 Disk 3 is now the selected disk. DISKPART> attributes disk clear readonly Disk attributes cleared successfully. DISKPART> clean DiskPart succeeded in cleaning the disk. DISKPART> create partition primary Virtual Disk Service error: The operation is not supported on a non-empty removable disk. DISKPART>
*FIXED* DiskPart encountered error... even though SD card is unlocked. Even though my SD card is marked as unlocked, I put a small sliver of scotch tape over the unlock slider in the unlocked position and this fixed my issues.
I tried to unlock it worked till attributes and when I clicked on clean it showed error with I/o as such what can be done it is a new SD card and I am unable to use it since I brought it
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
![Tee Grizzley - Robbery 8 [Official Video]](http://i.ytimg.com/vi/34_vkNV6wrU/mqdefault.jpg)
After typing clean, I get: DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information. What do I do? It's still locked!
Same
Yep, same here
@@biggstavros5876 same
Same answer here
same
When I try to clean it tells disk has encountered error the media is write protected
Excellent, I didn't, DOH!, even know there was a switch, many thanks, great video, Alan.
ikr, i feel dumb
I got the I/O device error too. My solution was ridiculously easy for my micro SD card. I initially blew off the physical switch-idea since I didn't find it anywhere on the micro SD card, BUT there is a lock/unlocking switch on the ADAPTER I use for my micro SD. It was as easy as putting my card into my adapter, pushing the switch, and then connecting it back to my computer.
I'm a tech dinosaur so I didn't even think about my micro SD adapter being my solution. Hopes this helps anyone struggling with the same problem!
I tried that, didn't work.
I tried your procedure all file are still on the USB flash drive. I still get the message "the disk is write protected"
Me too
Could you figure it out?
Same
Am tired
Wow !! Thank you ! i tried everything every kind formatting and did not format my 1 TB HDD . Thank you !
this was all operation for me!
1.... DISKPART> select disk 3
2.... Disk 3 is now the selected disk.
3.... DISKPART> attributes disk clear readonly
4.... Disk attributes cleared successfully.
5.... DISKPART> clean
6.... DiskPart succeeded in cleaning the disk.
7.... DISKPART> create partition primary
8.... DiskPart succeeded in creating the specified partition.
9 ...DISKPART> select partition 3
10 ...The specified partition is not valid.
Please select a valid partition.
There is no partition selected.
11.... DISKPART> select partition 1
Thank you for this video! I have been searching everywhere on how to write to my readonly ext HD and this finally did it! I couldn't partition or format with cmd for some reason but it appeared in my disk manager where I was able to format and assign a drive letter. Now i can read and write to my HD!!!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thank you! This was actually so useful as i was looking how to do it from the cmd,unsuccesfully , but you pointed out that some devices have a physical lock, you made it so easy.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
didn't know about this side switch thing after i moved it its working now you are genius .. thanks
We are glad that our video was useful to you. Watch more videos on our channel: ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Such a beautiful tutorial. It easily unlocked one of our old useful memory card. Thanks.
These methods may only work for those who's USB drive been write protected on the PC they are trying to unlock it, or if only attibutes read only are set. But if disk Write Protected on other PC > NOTHING OF THIS WILL HELP.
If it is done on mobile
after clean command it display error-DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information.
Just did it with a micro sd card from a camera , works great - Win8. Thanks for the video
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thanks! So easy, never knew about the little switch!
We are glad that our article was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
No usable free extent could be found. It may be that there is insufficient
free space to create a partition at the specified size and offset. Specify
different size and offset values or don't specify either to create the
maximum sized partition. It may be that the disk is partitioned using the MBR disk
partitioning format and the disk contains either 4 primary partitions, (no
more partitions may be created), or 3 primary partitions and one extended
partition, (only logical drives may be created).
What is this means? This was at the created partition part
DISKPART> create partition primary
Virtual Disk Service error:
There is not enough usable space for this operation.
you already have partition so you can skip this step
@@ryk647 thank you very much for clarifying. I was getting so frustrated
Helped at 0:48 initial check level which i didn't discovered before.Great video
We are glad that our article was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thank you so much!! I realized that there was a switch on my micro to sd adapter
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
So that's what the lock was for. Since I was using an adapter for a microSD, I thought it was a physical lock, lol.
Worked had a few issues however, kept at it. Thank you friend for the video very much!!!!!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
attributes disk clear readonly command run successfully... but when i run the clean command it shows like
"DiskPart has encountered an error:The request could not be performed because of an I/O device error.
See the system event log for more information."
kiran ravi Hi I faced the same error 1/0 device error...
What you guys done?
Encountered the same I/O error with my micro SD card....has anyone found a solution yet?
@@FranceNovelty Same here
Same error i faced. And I couldn't repair till now . Please suggest if anyone find the solution
Loved it, the steps are more clear. Thanks.
For me the problem is the microsd card itself is locked in that mode. The switch does not work and neither does just using the microsd card itself without the adapter. I have ordered a new card, but still would be nice to see if I can salvage this one for my second 3ds
If the card adapter has a notch but no slider switch it will only register as "write protected". A command prompt sequence will not cure that physical error because the computer mechanically reads an empty notch as "read only". However, you can put a piece of tape over the notch to cure the problem.
Thanks you so much! I would have never looked for a physical switch.
My dumbass also fell for that one. Didn't even know it was for that use. I thought it was to keep the micro sd in place (I use a sd Adapter for my micro sd)
This SD card came from a old SONY cheap handycam. I have tried your method many times. I get this when I type Clean. "DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information."
Thank you mate the first method work like a charm!
Very helpful! I hit my phone against a metal pole while handing it to someone, and the card would not save photos or videos properly afterward, this has made it so i can at least delete stuff after backing them up.. i will check if it works properly in the phone now.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thank you very much. Your tutorial has helped me. Really appreciate it 🙏 🙌 😌
Your tutorial was the easiest to follow the right pace and just so good thank u so much
Amazing video. I was just meaning to send the micro sd card to sun disk and get another new but i would have take 1 mounths. after watching this video and using the prompt command the card was unlocked thank you so much
We are glad that our article was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
I got the "DiskPart has encountered an error message". This is what worked for me: Flip the switch on the SD adapter/card to the LOCK position, then go back to the UNLOCK position, and try again. For some reason, it was stuck on "LOCK" when it was already unlocked. And this was brand new from the supplier.
What are the typical causes and solutions for "Data error (cyclic redundancy check)"? This error appears whenever I attempt to "clean" the SD card or if I try to create a primary partition.
Thanks you for the great video bro! It was the switch all along. Keep up the great job!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
I had to attach a Virtual disk file as part of the original partition.
Also located the disk location through the properties section in my computer.
Came up as Location 0.
I’m able to pull files directly off the laptop folder onto the SDHC Card now.
Lovely Jumbly
The shell I put my micro sd in had a broken switch which made it so that it couldn`t format the card because the switch would turn inside me computer. Put it in a different one and it worked. Thank you!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
I hope this tutorial will be worked on my micro sd card...thanks
Its useless! Make an example of MICRO SD CARD not flashdrive or sd card
Same thing
@@forget6917 Micro SD doesn't have the lock slider though.
@@forget6917 Not the same thing.. We are all getting the same error message when trying to "clean" our Micro SD card via diskpart console.. so yeah, this video is useless.
@@deealfonso3186 worked on my sd card
A very big thumbs up to this video. Thanks very much.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information.
Same here.
Same WTH is this shit?!
I was tying this on the card reader on my laptop. Maybe it had too much dust. Blew into it a few times and then it worked!
Yeah!!! I pushed up the button up on the USB card and it worked. Now I can delete the photos and videos. Life Saver!!! :)
We are glad that our video helped you)
Thank you so much.. the command prompt option helped me a lot..
Yeah so I did everything you said one that SD card and it did like it (Gave me an error) so I tried another one and the 2nd one worked. That took time and then me using my old PC (cause that was the only pc I had that has an SD card reader) it took me hours just to format a SD card. Sad isn’t it. Yeah I am so glad I got a new PC and I am waiting for a SD reader adaptor. Thanks for the video. I didn’t know you could do this on an SD card.
Never realised these cards had a switch on the side ,Thank you
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
thank you so much sir ,i forgot to remove the lock switch from my SD card reader it works like charm now
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Very helpful, thank you very much!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Very helpful :) It worked on my sd card
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
If clean command dose not work the reason maybe the drive is unallocated. To fix this go to disk management and right click and allocate it. This might work
in 0:44 Save my memory... thanks a lot from bottom of my heart ❤❤❤ (subscribed)
yeah!!!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thanks within 30 secs I've been able to format my sdcard
We are glad that our article was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
DiskPart has encountered an error: The request failed due to a fatal device hardware error.
See the System Event Log for more information. What I have to do now?
See the System Event Log, watch what kind of error.
this is the bets explanation available, tanks, I had trouble with my Android Formated sd card and this one did the trick
For those who get to like the format fs=fat32 quick or just before that and get something about it still be write protected. Do window+run and type in regedit. This should open up registries and from there you look for HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies. If you don't have a StorageDevicePolicies create a new folder by right clicking and click new->key. After that right click in the white section of the area and make a new->DWORD and call it "write Protection". Inside that set the value to 0. Save it and restart your pc and when its booted back up reformat you sd or whatever that was write protected. This worked for me.
this saved my usb driver, thank you!
Thank you so much!! It was very helpful indeed.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Works. Simple procedure. Etcher is causing my drives to get locked.
thanks so much worked!
liked, u best!
diskpart has encountered an error : the parameter is incorrect. see the system event log for more information .
help me plz
watch from 0:35 to 0:52 and move the small button there up or down and then format
@@ksmakbani not the problem
I have been successful in deleting the files.
It works for SD or Micro SD.
Just use a USB adapter or card reader that supports multiple types of cards instead of the Card Adapter that looks like a card. Such adapters don't get blocked by the computer.
Then delete files entering into the drive directory, not from outside of the drive directory.
It worked guys
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thx, brilliant, worked, love the calm explanation. Helps even 4 yeara later ;))
You are welcome)
I tried the Command Prompt but when I hit "clean" it gave me the following error: "DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information."
Not sure if you know of a solution for that. Great video regardless!
Team RCAV Hi I faced the same error 1/0 device error...
What you guys done?
Very, Very helpful. You're the best!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
Thanks for the video mate, really helpful.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Quick tip: for all of you that, upon typing "active" got the message "The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks." do the following:
1 - Download a prtition manager (EaseUS, for example);
2 - Wipe all data again;
3 - Create a new partition
4 - Done :)
Or you can right click on This PC (Win7) and click manage. Click on disk management. Find the disk number and right click it and format. For Win 10 just right click the windows button and click disk management.
Thanks Machane! Valiya Upakaram Indu, Orikalum Marakkathilla
The COMMAND PROMPT method worked for me. Thanks!
Omg thank you !!!!!! Not only did it fix my sd card but I also felt like a hacker while doing so.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thank you so much. you saved my micro usb card.🥂🙌
Helped so much! Thank you maaaaaaaan!
I couldn't create a partition, but it still worked, thanks!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Great help! Thank you so much
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
That bruh moment when he says to look at the lock switch and you do and it was locked and you feel dumb. thanks man for the help!
I REALLY WISH IT AS THA EADY FOR ME
Though I followed the instructions, I still cannot edit the files in my SD card. When I list the disk attributes, it says the following:
Current Read-only State: Yes
Read-only: No
Needless to say, I am very confused and would appreciate any help if possible.
thanks it works, I tried two different videos but cant get result. from this video i understand how to format and it works thanks
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
I flipped the switch on my sd card adapter and it worked thanks.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thanks for the video. It worked fine. However, when i formatted my memory card by this method and used in my digi cam it is showing Memory card error. Any way out from this problem?
Reformat it by the digi cam
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
Thank you so very much. It took a little finessing but it finally worked
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
he was honest. good luck.
Still won't work. Can't delete files, because they come back when I delete them.
Great walk through...worked perfectly. I've used it on two different cards.
i got this error - what to do?
DISKPART> clean
DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information.
watch from 0:35 to 0:52 and move the small button there up or down and then format
@@ksmakbani you cant be serious lmao dont you think we have tried this also that method doest work with a micro sd card that doesnt have a slider my guy
@@itsallawork5756 it helped me so if it didnt help you no need to lmao at it. why cant people just be decent with each other nowadays
@@ksmakbani Because you started it with assuming the original poster was an idiot who couldn't find a switch after viewing the video. I see you making the same post to others here, and it is not decent.
Buy a new pendrive 😂
For those of you with an Samsung evo card that still isn't able to access the card. For some reason the card functions properly when you plug it in directly, but you are unable to write when you use an sd card adapter.
Change adapter
Hetman Recovery tried two different adapters and the problem persisted.
You are a Genius Thank you very much ...
thank you so much nothing else helped but then i found this vid
look on the side of the adapter there should be a switch if its pointing down put it up then it will work
Yes
My man thanks a lot, it worked, I had to complete another format disk with the code format fs=fat32 it took like 1hr and 30 min to complete but it worked eventually.
Ok! I found something out! In my case my problem was the microSD adapter. I used another adapter, and my microSD was perfectly formatted.
no problem with the adapter. all you had to do was.....watch from 0:35 to 0:52 and move the small button there up or down and then format
Thank you. Where is that place showing in the desktop picture of your PC?
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
if you are not able to format then watch from 0:35 to 0:52 and move the small button there up or down and then format
Doesn't work
Thank you!
We are glad we were able to help you )
Helpful, excellent vid.
getting error DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information.
Thanks 🙏 dude I really appreciate your efforts
No problem!
Type "clean" and press enter...
"Diskpart has encountered an error: Access is denied. See the event log for more information."
Chebus...is this REALLY this difficult?????
Thank you so much!
thanks always wondered about that tab on the side
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
attributes disk clear readonly is sweet spot.
I'm stuck in DISKPART part. Everything was same like in the video, until it turn out like this :
DISKPART> select disk 3
Disk 3 is now the selected disk.
DISKPART> attributes disk clear readonly
Disk attributes cleared successfully.
DISKPART> clean
DiskPart succeeded in cleaning the disk.
DISKPART> create partition primary
Virtual Disk Service error:
The operation is not supported on a non-empty removable disk.
DISKPART>
Make sure you run a cmd.exe like administrator, Start -> Run -> cmd -> Ctrl+Shift+Enter
*FIXED* DiskPart encountered error... even though SD card is unlocked. Even though my SD card is marked as unlocked, I put a small sliver of scotch tape over the unlock slider in the unlocked position and this fixed my issues.
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
ruclips.net/channel/UCu-D9QnPsAPn7AtxL4HXLUg
I tried to unlock it worked till attributes and when I clicked on clean it showed error with I/o as such what can be done it is a new SD card and I am unable to use it since I brought it
Change the Card Reader and Try once