Lian Li 011 Mini RTX 3080 TIME LAPSE BUILD
HTML-код
- Опубликовано: 9 фев 2025
- This is my first ever PC build parts list provided below bought from various sources Amazon, Best Buy, and Local shops.Total cost ~ $2300 with minor price inflations. Hope you enjoy!
Parts List:
Ryzen 5 5600x www.amazon.com...
MSI B550 Mag Mortar Micro ATX/Wifi www.amazon.com...
NVIDIA RTX 3080 FE
Lian Li 011 Mini
Lian Li AIO Galahad 360
Lian Li SL 120 3pk x 2
Sandisk 1TB SSD www.amazon.com...
Corsair Vengence Pro 16GB 3600 MHz www.amazon.com...
CoolerMasters SFX 750W www.amazon.com...
Ducky Mecha Mini One 2 mechanicalkeyb...
Razer Basilisk V2 Wired www.amazon.com...
Asian Horse Cable ext www.amazon.com...
Love those down to earth builds with high CP value components rather than those Maximus extreme board that cost a mortgage.
Lemme touch dat 3080 so I know this gpu crisis is just a dream
Try Best Buy bro it’s possible
@@SupraFast510 Bots are too fast😭😭
@@sushantxyz4134 agreed ;-;
Update guys got my hand on a zotac 3070 ti $700
@@sushantxyz4134 hell yeah bro!
looks like another universe! LOL lian li is a new apple for Gaming
Such a clean build. I just used this same case with a 10850k. The size of this case is bigger than my previous tu150 build but has everything you will ever need. Heads up I am not sure if you know already but the film you peeled off, there’s also some on the inside part of the glass. I could not figure out why the glass still had a hazy look until I tested it and there sure was a second film to peel on the inside.
Yeah bro totally agree this case is amazing to build in! There is so much versatility. I don't believe mine came with the extra film on the inside, but good looks though especially for anyone else looking for this case.
@@SupraFast510 you are lucky it took me almost a week to figure out there was the inside film LOLOL. Yeah this case is crazy good. Lian li has done really well with their cases. How are your thermals? I used a Corsair h115i. The noise was at first so bad but I was able to figure out how to adjust the fan curve and much better now.
@@Blaquegold my thermals are decent. I generally just use the lian li control center since it simplifies both RBG and fan settings, however it doesn't let me individually adjust fan curves. For whenever I'm gaming I'll just use the manual feature to ramp up the fans a bit no problems thus far with overheating. I am considering taking out the single 120 fan in the back since I noticed its drawing most of the exhaust away from the 360 AIO.
@@SupraFast510 I think your fan placements are just fine and you should leave that one fan since that and the AIO fans are acting as exhaust. The fans on the side are supplying enough air. For mine I have 2 120 fans on the bottom and 2 120 fans on the top. My AIO is a 280 which I have on the side. Also I have another 3 140 fans behind the 280 AIO so in all my AIO has 4 140 fans. It keeps my 10850k NICE and cool. I used the Corsair software to adjust the fan curves and the system rarely ramps up. I am sure your AIO has to have fan curve configuration. I had to RUclips mine they surely should have one for your Lian li AIO.
@@Blaquegold nice yeah that push pull 280 you got there probably does wonders!
Awesome! But I still prefere all black or all white.
Nice build.
Brother where did you plug your AIOs power and rgb cable? Same mobo I can’t find the rgb header
The biggest let down of this build is that RTX 3080 proprietary PCIE power cable. Apart from that its quite nice
Haha smacks me in the face everyday I look at it
I’ve literally been looking for cable extensions for this psu FOREVER!!! I couldn’t find any till now
Have you tried just figuratively or metaphorically looking instead?
@@moriyokiri3229 what?
aren't cables extensions everywhere?
@@thatneo4133 I wouldn’t just buy any cable extension for any psu lol your asking for a problem certain psu take certain cables
@@carlossaucedo34 iv'e never seen anything about cable extension compatibility
Nice build man I recently built damn near the same PC as you did except I used the AL-120 fans.
Nice bro! Still breaks my neck everyday haha
LOL whats up with the SSD? Do you like unplug it and use it on other PC's or something? 😱😱
Sick build
I’m building my own soon
Nice! What kind of build you going with?
It's extactly like my computer. Everything but the CPU, motherboard and GPU. I have a ryzen 7 3700X, a GTX 1080 Ti and a ASUS ROG crosshair hero VI. Better computer. the RTX 3080 is a beast !
Damn that motherboard you have is a beast
@@tanaka9260 yes ! X370 ASUS Republic of gamers Crosshair HERI VI. one of the best motherboards in the market. Its like the dark VIII. The best in the world.
I have the 360 galahad lian li , with the lian li xl case and 3 fans bottom, 3 fans right side , 1 fan in the left side but there is only 4 ports on the controller. I have hooked up all the fans to the controller but i need 1 more spot for the i/o cooler that needs to clip in there. How do i do that with only 4 ports and i need the last one for the i/o galahad. I cant find a splitter anywhere for the type of end of the cooler. 1 goes the the motherboard but the other suppose to go to the controller but ran out of spots..How do i hook the last one up?
The lian li RBG cable kit actually has the wire to split the AIO and one set of fans to be able to use one port on the controller. It is a little confusing, but I used this video to learn how to do it. He does a good job at explaining and showing how to connect the cables. Kleo Yan
ruclips.net/video/XNCAeAX0mZQ/видео.html
@@SupraFast510 Thank You
I hope he told off the peel on the cooler before he put it on the processor.
VERY GOOD BUILD +10 from me !!!!!!!!!!!!!
Thank you!!!
Nice build but where’s the glowing RTX 3080 logo?
After downloading the updated drivers the logo does glow
Paired with a 5600x? Won't that bottleneck?
Happy new year!
??? your a bit late
@@GhastMan03 I'm talking about the fact that such a backlight could replace a Christmas tree.
Maybe I made a bad joke)
@@mind_traveller ooook
hey, need a little help mate. How does that single uni fan at the back is working?
Yes I tried to put a card in that part of the video referencing where I found how to combine the AIO and that single uni fan to use one port on the rbg controller. Pretty much you have to buy the lian li rbg cable kit and in there contains a splitter that allows you to do that.
@@SupraFast510 i have everything, i bought 6 uni fans (with all the lian li kit and rgb hub controller etc) and i have 360mm galahad cooler, I was wondering how to connect that single fan at the back with everything. I will assemble my build this week
@@KhyyamK try watching this video ruclips.net/video/XNCAeAX0mZQ/видео.html had to watch it a couple times to get it. Pretty much you have to use the additional rbg cable splitter to attach one fan set to the rbg cable from the AIO so they work from one port on the controller.
Does the cpu cool ok with the the radiator fans sucking the hot gpu air straight through it from the flow through design? How are thermals in general both cpu and gpu. Very nice build
Mainly only playing war zone temps are around mid 60s. Since I upgraded my monitor to a 1440p and it’s definitely getting more toasty like low to mid 70s at peak
I hope you got the revised PSU bro, I heard the old one sounds like a jet
Unfortunately I didn’t but it’s not too bad especially if you use headphones majority of the time which I do. Definitely on the list for upgrade though.
@@SupraFast510 That’s great to here! I saw alot of builders use this power supply, and they say the revision of these cooler master power supplies says Japanese connectors on the bottom right side of the box, if you do decide to get another CM psu, just look out for that smaller detail.
@@jg1746 I guess they couldn’t resist that Amazon sale either haha
Clean build though
Hi there! How did you connected the Aio Led connector since the Lian Li controller has only 4 modules for fans and led and no spece left for the Aio Led connector?
You have to purchase the lian li RBG cable kit. It comes with a splitter that allows you to attach the AIO to one of the fan setups in order to utilize one hub on the controller.
If i see one more build in the lian li o11 dynamic i will cry why everybody want this case ....
Haha what case do you prefer?
Did u have an issue with updating your bios for the cpu? Cause I see you have a ryzen 5600x and b550 motherboard right? I'm planning on getting the same thing but I was wondering if it takes a lot to update it
I got lucky and no bios update was required. I’m not sure if all versions of that mobo come ready to go however.
bro what temps do get?? i’m thinking of getting this case but i’m afraid it’ll get too hot with my 3080
I honestly don’t play too many games mainly just warzone 1440p moderate settings. CPU gets into the 50s-60s and gpu floats around 60s-70s. Definitely gets the room toasty. But I believe the new models with the mesh panel could help that. Wish they had that at the time.
question that little extender thing for the motherboard to be placed on, was that included with the case? or did you buy it seperatly?
comes included with the case
So ein schönes weißes Build und dann haut er da so nen schwarzen Brocken rein. Die gibt es doch auch in nem wunderbaren Weiß die GraKa und zu guteer Letzt auch noch schwarze Kabel anstatt weiß geslifte. Da kannst nur noch mit dem Kopf schütteln.
Trop belle mon rêve cette tour ♥️♥️♥️
How did you mount 360 Aio I thought it doesn’t support it
As long as your mother board is smaller than ATX then you should be able to top mount your radiator. As in mine I am using. a micro ATX board. However I recommend just doing a side. mount 240/280 AIO.
Nice build, cable management could be a lil better but nice
Yeah after taking the extra time to film the process I was like I can come back to this I’m ready to play haha
@@SupraFast510 lol, yeah, totally feel you man.
i wish they had unifan AIO, that would be so cool, But i swear ive seen people with them
Haha that would be a game changer
O11 mini or 4000d?
Why are you blowing hot air out through your radiator?
For this case that’s the only option for placement since I’m using a 360 AIO. If I chose 240 instead I would have put it on the side intake.
@@SupraFast510 no... all you need to do is flip the top and bottom fans over, then you're pulling cool air in through your radiator and pushing the warm air out through the bottom of the case.
@@Jenan_Tahnik that is true, but hot air rises. The way the case is set up seems more optimal in my opinion exhausting as much hot air as possible from the top and back.
@@SupraFast510 Natural Convection isn't going to overcome the push/pull of 6 fans.
@@Jenan_Tahnik ruclips.net/video/TOfDOjC2Esk/видео.html
Anybody know of a 1000+ watt psu that i can fit into this case? Planning for the future as i wanna out a 4000 series card in this later when they release.
Clean rig. Only thing I would of done is thrown the AIO on the side for fresh air instead of exhausting through it.
Yeah looking back at it now I would have rather gone 240 AIO on the side. Maybe in a future build or if I decide to mod this rig I will change that.
Don't use founders edition graphic card
These card doesn't have a good air flow
BTW LOVE THIS BUILD
Don't use this card again in another build. 😇
Yeah I’d like to get another graphics card to compare, because it does get warm. Great for the winter months haha.
whats the song you used around the 5 minute mark? I hear it everywhere but dont know the name lol
Haha I gotchu bro. Its called Whitefish Salad by Latasha. Free to download in the youtube audio library.
@@SupraFast510 thank you so much. Congrats on the finished build btw.
Did you need to update your motherboard for your cpu? or did you just put the cpu in without updating
No luckily my mobo came updated and compatible
Pump above reception pt?
Now that I secured an RTX 3080 at msrp im itching to replace my nzxt s340. I wanna old out for the O11 Air Mini since it'd support my atx psu but goddamn, idk if i can keep waiting. Videos like this are driving me insane lmao
Congrats brother on the 3080! Yeah man the air mini looks dope definitely will be better with the temps
How did you fit a 360 aio at the top? Did you have to do any modifications?
The mother board has to be a micro atx or smaller other wise only fans can fit at the top.
@@SupraFast510 thank you so much
The most shocking part of this video is that he used rtx 3080 fe.
hi man, I have a question about the power button led. Mine keeps on Red "reading drives" and never goes to Blue. And I see yours is blue maybe you know what I did wrong? I have a Aorus x570 Elite
I am actually not to sure since I have not run into that problem my motherboard is a B550. Is your computer booting up correctly and able to download all the drivers?
@@SupraFast510 Yea its booting up correctly with all the drivers. Only difference is that i have a remote between it. But the led is not connected to that.
@@Big-Mc-X how is it going now?
@@Dusti_buns I removed the power led connector from the mobo. So there is no color right now. My computer is working perfectly so I don’t know what is is.
hello can the rear be exaust fans? i mean i just want the bottom be intake only
I feel like that could work just wanted to make sure my top mount AIO was getting enough pass by air.
@@SupraFast510 is the rear fans 120 or 140?
@@iskandarzone2719 it’s a 120
hi, i have a question. Will my atx psu fit with this particullar case? my dimensions are:150x140x86.106?
I know that the newer version of this case the 011 air mini can fit an atx psu up to 200mm. However for mine it cannot.
Is that motherboard a atx?
Micro ATX
Sorry man, when u put your ssd with that sata cable connector, i stoped to see it.
At some time, u'll see the trouble you did it. Fix it while you can.
I ended up fixing it off camera
@@SupraFast510 Oh man, that's a great news. If u allow me to help you. Here, in Brazil, i already build a several times this same CPU Case and i found an AMAZING video with instructions how to build...
ruclips.net/video/X4xXH920hCA/видео.html&ab_channel=Subdubbin
I believe you can improve your build my friend. Thanks for your reply. See you!
can you name the musics you used here pls?
Turtle time- Verified Picasso
Whitefish Salad- Latasha
Space was the place- Audio Hertz
All of these are free to download on the RUclips/google media
@@SupraFast510 thank you very much man
also can you pin this comment or put the music videos in the description? would make better for anyone also looking for the musics
why exactly do you have fans on the bottom of the case below the gpu?
System is set up for bottom and side fans as intake with top and back fans as exhaust.
@@SupraFast510 alright thank you
did you find the sl120 fans hard to screw in since the holes are not threaded?
Yeah I did notice it is a little awkward, but nothing too difficult.
@@SupraFast510 do you need to screw in the whole screw into the hole coz I noticed that I cant screw the whole screw in for mine.
@@Mr.PaulyP From what I remember it was a little tricky to get the screws to initially screwed in, but once it starts to thread it would usually go all the way in.
Quick question what was your reasoning for making the aio tubes on the front panel side?
With that extra fan on the back it blocks the tubing coming from the radiator. Been debating on switching up the fan configurations by removing that back fan.
poor sata cable :( that bend was killing me
haha don't worry I ended up feeding the cable through the bracket after along with a little more cable management off camera
I put together a parts list that was almost exactly this build before I saw your video lol. One question, did the mobo need a bios update for the r5 5600x? Good job on the build, and nice video!
Thanks bro! I was lucky enough that the mobo did not need a bios update. What parts are you about to do differently?
@@SupraFast510 Everything is same except I'm going for a 3070. Still trying to figure out what 3070 to go with. I want one that looks good but isn't much more expensive than the founder's edition.
@@jrwatts5803 haha that was exactly what I was going for in the beginning. Just happened to hit on a 3080 from BB. Also if the all white case that is out now was available I would have gone that path.
@@SupraFast510 Nice! The all white case looks good, but I'm going for a black and white build, and I like the black accents of the original. Also, how do you like the uni fans? I'm still debating if they are worth the price.
@@jrwatts5803 the unifans are dope super easy plug and play especially with the uni controller that it comes with. Just the daisy chaining required for the AIO fans I was like yeah glad I don’t have to cable manage all the fans like that. Simplifies everything but they are pricey.
The author of the channel please tell me what kind of building it is give it a name
How's the fanless CM V750W? I've watched a video of the first release that it's noisy and fan stop when idle. Hehe.
I actually haven't experienced much noise from it at all to be honest. Maybe down the road if I end up running into that problem I'll contact CM about it.
its not nosiy and it is supposed tos top when its idle. Thats normal and that's how it is designed to reduce noise as much as possible.
Any reason why you chose 2x 140mms for the side rather than the complete 3x 120mms?
So the side area is only able to fit 2 fans due to the size of the case and the current ones are actually 2x 120mms.
😍
WHERE DID YOU GET THAT 3080?????
BEST BUY BRO!!!!!!!
What’s your gpu and cpu temps while gaming?
Mainly only playing war zone temps are around mid 60s. Recently upgraded my monitor to a 1440p and it’s definitely getting more toasty like low to mid 70s at peak.
@@SupraFast510 did u undervolt too?
@@trinitycob6617 no I have not
is 750w enough for r5 and 3080?
Yes
@@SupraFast510 um.. doesn’t it spike tho
@@bruvtrippin nope haven’t had any issues
What’s the cost of the full set up?
Roughly about $2300 at the time of the build. Started buying parts here and there in the end of 2020.
Nice build! What gpu temps you get at max load?
At max it can get to mid 70’s
How much did this build cost you in total?
At the time of the build roughly $2300
@@SupraFast510 ok thank you and nice build
Those 2 fans on the side are 120 or 140mm?
Currently they are 120mm. I’m considering picking up two 140s and switching out the radiator fans for the 3 120s on the side and back in the future.
Hey, I am thinking if building a pc as well. I have a qestion, is water cooling GPU worth it?
I will use it for gpu mining and gaming and will overclock it so should i get a waterblocked 3080 or just a fe one.
I’m not sure I’m the right person to ask since this was my first build. However I’d assume water cooling has its benefits. I’ve used my computer for mining before with no overclock and it definitely gets pretty hot. It also depends how long you plan on running your system throughout the day. As far as the FE I know it can heat throttle due to VRAM temps when mining that some people replace the thermal pads to solve the issue. Hopes this answers your question.
Love this build! Super clean. Have to ask, was there a reason for a Sata SSD over a M.2 gen 4?
Thanks a lot! I went with a Sata SSD mainly for budget reasons, but will probably in the future upgrade to M.2
@@SupraFast510 nvme's are about the same price as your 2.5ssd now. price to performance, its a no brainer
@@derekyam1805 yeah now prices are better. Picked one up on Black Friday and added it to the build
hello, I am a poor boy, I love gaming but i dont have any device to play games please give one simple computer
Case name
In the title Lian Li O11 mini
Price?
See the description I have a rough estimate.
4:54-5:07
it would honestly look better when you dont use rgb
Yup looks great during the day when it’s off haha
@@SupraFast510 have you used color white on it
@@Reezs yeah that’s actually the color I always set it too with a hint of blue
Please don‘t get MSI MORTAR or in General MSI MAG Motherboards. Those have so much issues with USB, RGB and the VBIOS is so bad. Get Gigabyte instead like AORUS or ASUS-ROG.
Zajebiste
Oi sou uma brasileiro que está aqui vendo isso só pro vantade de ter um PC mais sei que isso nunca acontecerá
why r5 and rtx 3080
I mainly use the PC for casual gaming and net browsing. Originally was going for a 3070, but ended up snagging a 3080.
you could've gotten additional ram instead of the amount of fans lmao
If I want to I can. Don’t see the need to at this moment.
too many fans! I want to hear the sound of a running computer with 9 fans and a power supply, not music!
where tf is the time laps
LOL that cable management SHAME!!!!
I see no lies aha
this founders Edition Connector is a fuckin joke. Nice Build! But this 8 or 10 pin adapter or whatever it is, is horrible. Makes no sense why they did this
I totally agree bro it’s a pain to look at. Would have been nice to have just the white cable extensions connected only
boa chupão
Worst cable management
Eww level mobo
Black gpu is this build is disgusting
I would appreciate if you fix that problem for me