RSX Type S INVIDA N1 Catback Exhaust Install! (Rsx build part 4)

Поделиться
HTML-код
  • Опубликовано: 24 янв 2025

Комментарии • 63

  • @angelarriaga3696
    @angelarriaga3696 6 лет назад +8

    My brother got this exhaust and we had the same issue with the tip rubbing the bumper. I bent the hanger arms a bit which caused the tip to sit a bit lower and it cleared the bumper. Lol

  • @Loyal_Honda_Fan
    @Loyal_Honda_Fan 5 лет назад +24

    Thats how an exhsaust should be... louder at idling but quiet as possible high end... great option, wish we had acura cars produced in europe as in us... 😔
    Great video tho!

  • @boostlee876
    @boostlee876 5 лет назад +7

    You should have had someone position the the muffler section and center it while you tighten it. That’s how you get the clearance between the bumper and the tip

    • @TheCaymanRasta
      @TheCaymanRasta 5 лет назад

      The problem is the midpipe section to the muffler is angled up just slightly too high, I just cut a bigger exhaust hole in the bumper with a dremel and box cutter; but you could alost bend the midpipe hangers up just a little bit.

  • @chanvlogofficial5232
    @chanvlogofficial5232 4 года назад +1

    I got my 02 rsx I install tanabe medallion exhaust :). Yours sounds good bro. New subs here. Watching from Toronto Canada

  • @albertizdead3758
    @albertizdead3758 5 лет назад +3

    that vtec at 11:59 tho🤤

  • @ykfaris2106
    @ykfaris2106 3 года назад +1

    What’s the best sounding/ LOUDEST exhaust for k24/20. Please help, looking to buy one

  • @anthonyvaldez179
    @anthonyvaldez179 6 лет назад +4

    @RoytheBoy do you think that if i have this would pass the exhaust test in California

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  6 лет назад

      I would guess that it would pass but not by much

    • @bobbyqueso
      @bobbyqueso 5 лет назад

      i wouldnt take the chance

  • @st3v3nb915
    @st3v3nb915 6 лет назад +1

    I’m running 🏃🏻 vibrant!!

  • @WaffleCake.1
    @WaffleCake.1 Год назад

    Does it hang really low?

  • @justcloak3223
    @justcloak3223 2 года назад

    Can you install a invidia n1 on a non type s rsx, getting into cars so dont have the highest knowledge

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  2 года назад

      Pretty sure u can but check invidias website it will tell you

  • @mickeydeas5716
    @mickeydeas5716 4 года назад

    Burn the bumper?

  • @sampangpapi6049
    @sampangpapi6049 4 года назад

    yo, how long did shipping take ordering from the site you plugged? Thanks!

  • @astnx
    @astnx 5 лет назад +1

    Does this come with a silencer

  • @Xenationals
    @Xenationals 4 года назад +1

    U had upgraded headers too? Or just the exhaust?

  • @andrewpalma8474
    @andrewpalma8474 4 года назад

    Did you ever fix the bumper fitment?

    • @andrewpalma8474
      @andrewpalma8474 4 года назад

      Ok read the comment heat up the hanger and bend them thank you for the vids man just bought my exhaust based off your videos 🙏

    • @andrewpalma8474
      @andrewpalma8474 4 года назад

      @Vipaspeedfactory on ig for all my 💩 boxes

  • @ObeyCityFPS
    @ObeyCityFPS 5 лет назад +1

    Will this work on the base model?

    • @gtgogguie
      @gtgogguie 5 лет назад

      Yes, same car.

    • @iblackfiree
      @iblackfiree 5 лет назад +3

      no because its only for type s unless you get a type s header and cat or type s racing headers. it’s different for a base

  • @Keefe89
    @Keefe89 5 лет назад +4

    Did it melt your bumper at all?

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  5 лет назад

      Yes i bent the hangers so it would hang lower

  • @luisdominguez1571
    @luisdominguez1571 4 года назад

    Did this end up melting your bumper? Mine melted and now i dont know what to do 😔

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  4 года назад

      Yeah. U can heat up the hangers and bend them

  • @importloyalty9495
    @importloyalty9495 5 лет назад

    Does it bring gaskets and bolts ?

  • @r2daizodc599
    @r2daizodc599 4 года назад

    Does this exhaust burn your rear lip and does it scrape?

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  4 года назад

      Yes and yes

    • @r2daizodc599
      @r2daizodc599 4 года назад

      Did you put anything on your lip to prevent it? Like a heat shield?

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  4 года назад +1

      @@r2daizodc599 nope lol

  • @RickyWithTheCars
    @RickyWithTheCars 5 лет назад

    Any other mods? Or only catback?

  • @juanjoseesparza1
    @juanjoseesparza1 5 лет назад +2

    damn u hella fucked up the treads with the impact gun

  • @juniorgonzalez4921
    @juniorgonzalez4921 5 лет назад

    Did you leave the catalytic converter with the exhaust?

  • @itsyaboyed7234
    @itsyaboyed7234 5 лет назад +3

    I just got my rsx type s last week, was dying to have one. It does need some tlc but that's what I'm here for lol. Came with a eBay exhaust and wow dude, that invidia exhaust sounds so beautiful next to the one I got. Question? Do you have header? Or just put catback?

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  5 лет назад +2

      Just catback in this video

    • @itsyaboyed7234
      @itsyaboyed7234 5 лет назад +1

      @@RoyTheBoy_yt Thanks for your response buddy, so with a header it should be a lot louder then huh?

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  5 лет назад +1

      @@itsyaboyed7234 to be honest i dont notice a difference it just changes the tone. I'm gonna try to put up a video with my header soon

  • @jowellp.r.7577
    @jowellp.r.7577 5 лет назад +2

    Sounds like stock..i got on my type s 05 hks hi power exhaust..and sounds perfect not to loud, just perfect

  • @machomaamtrannysavage9642
    @machomaamtrannysavage9642 5 лет назад

    Sounds damn good

  • @A.spec-alan
    @A.spec-alan 6 лет назад +2

    Are those 05'-06' tail lights ?

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  6 лет назад

      No i think they are from ebay. They are coated with red nightshade.

    • @A.spec-alan
      @A.spec-alan 6 лет назад +1

      @@RoyTheBoy_yt oh I see they look a bit odd. Nice DC5 by the way.

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  6 лет назад

      @@A.spec-alan thanks man 👍 bc coils and wheels videos going up soon

  • @steveho8808
    @steveho8808 5 лет назад

    Vtec cracks hard

  • @bhadz100
    @bhadz100 6 лет назад +1

    Does it drone in the highway at 3k

    • @RoyTheBoy_yt
      @RoyTheBoy_yt  6 лет назад +1

      its not too bad but i am used to loud exhausts also if that helps

    • @mchevownr
      @mchevownr 5 лет назад +1

      Nice video and sound! Any recent updates about the sound? Has it changed over time? Also, can you use the silencer and then video it on the freeway. Trying to see about the drone.

  • @cosmiccj_
    @cosmiccj_ 6 лет назад +3

    But where’s the link? LINK PLEASE 😂😂