Great video Clara. Do you have any experience with polishing the end of the fiber optic cable? Ours has a spot and would want to avoid changing the whole cable to avoid having to have someone to weld it.
Thank you for your videos Clara. They are excellent. Just one clarification. Wires on Max source are labeled as Emission enable input +/-, modulation input, external laser output, fault output 1 and 2, NC, 12 in total. Which one of these are actually EN-, EN+, PWM+/-? Thank you
@@ClaraChai Thank you very much for your answer Clara. If I may to ask, the wiring diagram in Fscut3000s also showing PD+/-, Guide Laser+/-. Can you tell me please which ones are these? And are they mandatory to connect since you didn't connect PD+/- and guide laser? Thank you
@@ClaraChai A good extension would be a digital display, which shows the distance of the laser, since the laser has a focus point. This way the user can see the exact distance at the same time and knows at which distance he is focusing correctly. If you can also project the display digitally onto the workpiece the user can read the distance above the laser beam because it doesn't need a digital one) like a clock that projects the time on a wall. this can also serve as a safety feature if the distance is too large or too small the laser will deactivate to prevent damage but also to extend the run time of the laser.
Nice class; thanks for sharing
Thank you
Great video Clara. Do you have any experience with polishing the end of the fiber optic cable? Ours has a spot and would want to avoid changing the whole cable to avoid having to have someone to weld it.
Sorry, I don’t have the experience
same problem hire
hi clara! nice video, What happens if I don't have any free com in area 4 for the EN-? and also is it necessary to do the decrypt?
Yes, correct
Thank you for your videos Clara. They are excellent. Just one clarification. Wires on Max source are labeled as Emission enable input +/-, modulation input, external laser output, fault output 1 and 2, NC, 12 in total. Which one of these are actually EN-, EN+, PWM+/-?
Thank you
Emission enable input +/- and modulation input.
@@ClaraChai Thank you very much for your answer Clara. If I may to ask, the wiring diagram in Fscut3000s also showing PD+/-, Guide Laser+/-. Can you tell me please which ones are these? And are they mandatory to connect since you didn't connect PD+/- and guide laser?
Thank you
@@mtimo4868 Sorry, I will tell you after I confirm the details.
@@ClaraChai Of course, thank you Clara
@@mtimo4868 Thank you 😊
Hola tengo una tarjeta de control eds3000 v1.3
Y requiero conectar un max fotónics me puedes decir como
Lo siento, no estoy familiarizada con ese sistema.
Hola gracias de todos modos te mando una foto de la tarjeta es una leapion muchas gracias
it would be nice if you could have a small laser to test with. so you can be sure in advance to found a company that deals with laser cleaning.thx
Thank you
@@ClaraChai A good extension would be a digital display, which shows the distance of the laser, since the laser has a focus point. This way the user can see the exact distance at the same time and knows at which distance he is focusing correctly. If you can also project the display digitally onto the workpiece the user can read the distance above the laser beam because it doesn't need a digital one) like a clock that projects the time on a wall. this can also serve as a safety feature if the distance is too large or too small the laser will deactivate to prevent damage but also to extend the run time of the laser.
@@Chefchen21 Thanks
@@ClaraChai always an honor, thank you
How do I connect to a machine with no Ethernet cable?
Data wire
thx. nice and helpful videos😘😘
@@renesanceindustrialsales2404 Thank you
Please next Raycus RFL
Sorry, not scheduled currently.
Do you have Wechat I need help with my 3kw Max Laser installation.
+86-13335151833, if for installation, it is not free, you can check my store-Hourly Service.
what is password for DECRYPTION of maxphotonics
You should ask the person who sold the laser to you.