My friend I have a raycus 1500w recently it started to cut bad when checking I noticed the cable fiber jeune in the head crystal black dot what should I do is there a solution please help
Hi Jally, I was wondering, on the IPG modular system do you make repairs? Because I understand that for those types of modules after changing a diode and splicing the fiber you need some sort of software or key to make it able to use that new diode or full power. I have seen some that say they repair those, but only bypass the module. I am talking about the YLS I will like to hear more about it.
yes, you need to do some resetting through the software, for multi module lasers, normally swicth the module, for single module lasers, need to change the diodes or other parts internally
Very interesting to watch. Having burned dots on a crystal is really unfortunate. Happened to me 4 times already, i had to send it to another country to repair. I didnt fully understand the part about repairing Raycus. You said its easier to repair it, Can you explain it to to me please? Right now i'm using IPG and considering about upgrading the laser source.
because raycus has seperate optical and electrical module, so if you cannot repair the inside resonator, you can choose to switch the whole optical module, which is easier compared with sending back the complete laser back to repair.
J ai une machine de découpe qui travaille avec générateur raycuse mais dernièrement lorsque elle travaille quelque heures le générateur donne la larme jaune et elle donne pas la Lazer Svp si vous reçu ce message tu peux m aide de me indiqué ou je peux trouve la solution svp
you can contact me by my email address or phone number on my channel introduction, but we cannot send people to you for repair, what we can do in online checking together with your engineers and send you parts if need to change
Great presentation, and excellent English. This is actually very rare with most Chinese companies videos. Highly appreciated on all levels!
thank you for your positive feedback, we will keep working hard
My friend I have a raycus 1500w recently it started to cut bad when checking I noticed the cable fiber jeune in the head crystal black dot what should I do is there a solution please help
a bit difficult trouble then, you need to change the whole fiber, by doing this you need special tools and professional technicians
Dfjfdgww
Luis santiago
Hi Jally, I was wondering, on the IPG modular system do you make repairs? Because I understand that for those types of modules after changing a diode and splicing the fiber you need some sort of software or key to make it able to use that new diode or full power. I have seen some that say they repair those, but only bypass the module. I am talking about the YLS
I will like to hear more about it.
yes, you need to do some resetting through the software, for multi module lasers, normally swicth the module, for single module lasers, need to change the diodes or other parts internally
ลลลลลล
@@jallyqu
Why do those black dots appear on the cable? Why is a fountain damaged? How to take care of it, greetings
Hello 👋 thank you for your video. Could you help me please how to repair cooling plate that bursted from cold
please send me the pictures by email or what's app message
You are very knowledgeable in your field of sales, it inspires confidence in your products and company.
thank you, we will work harder to be more professional
@@jallyqu ฃพะรรยบช,,,,
@@jallyqu
ภ
so great
상세하게 설명해주셔서 고맙습니다.
시청 해주셔서 감사합니다
Very interesting to watch. Having burned dots on a crystal is really unfortunate. Happened to me 4 times already, i had to send it to another country to repair. I didnt fully understand the part about repairing Raycus. You said its easier to repair it, Can you explain it to to me please? Right now i'm using IPG and considering about upgrading the laser source.
because raycus has seperate optical and electrical module, so if you cannot repair the inside resonator, you can choose to switch the whole optical module, which is easier compared with sending back the complete laser back to repair.
@@jallyqu Thanks
@@Skylos100500 you are always welcome here for technical discussion
.
.
Hi, do you have any experience with polishing the end of the fiber optic cable?
no, we haven't polished that crystal yet, normally we change the whole fiber
can u help me with the kind of resin or epoxy used to fill spliced fiber in the optical module? esp in Raycus machine
yes, you can write email to us or what's app me: jallyqu@demarkchina.com; 0086-13517268292
I have problem with my Fiber laser 2kw source ( Power Supply Failure 2 alarm) How can I contact you?
please write email to me at jallyqu@demarkchina.com or contact me by what's app 0086-13517268292
I bought fiber laser 1000 w rfl type
I couldent make connecting with computer by the 2 way ethernet plus rs232 may i have the help
contact us by email or what's app, we will try to help
Tutorial wiring power supply PS 2 & PS 3 ?
Svp je voudrais le logiciel qui indique les défauts le raycus générateur svp aide moi de résoudre ce problème
I have problem with my Fiber laser 2kw source ( Power Supply Failure 2 alarm) How can I contact you?
Hello, were you able to solve the alarm?
@@juanfelipe-lr5bt Not able to sove it.
@@kapechkong4343 I have the same problem, I would like to exchange ideas. what is your whatsapp or contact number?
@@kapechkong4343 what is your whatsapp or contact number?
Hello, were you able to solve the alarm?
J ai une machine de découpe qui travaille avec générateur raycuse mais dernièrement lorsque elle travaille quelque heures le générateur donne la larme jaune et elle donne pas la Lazer
Svp si vous reçu ce message tu peux m aide de me indiqué ou je peux trouve la solution svp
Hello I love your video am using IPG 1000w laser which is giving alarm can you help
How can I contact you
please wirte to my email box: jallyqu@demarkchina.com, or contact me by what's app: 0086-13517268292
Hi, Jally, can you help my colleague for trouble shooting of Raycus RFL-C1000?
yes, I think we have been in contact
ช
ชชชชช
ฃชชฃชลชฃลชฃลลช
ชลลชงชงชลชชชนชม
เมาดิบ
Great infos!
Hi....can I contact with you I have issues with my fiber leaser 50w raycus
sorry sir, we don't repair pulse lasers, so not much experience with that, we mostly deal with high power CW lasers.
Thanks for knowledge mam....
thank you for watching
Hello mam ..I'm fiber laser cutting machine operater. I need job please reply......
Q&A
Hi Jally, I havw an IPG laser non working, how can I contact you? or your company, to have some help from you to repair my IPG fiber laser repaired?
you can contact me by my email address or phone number on my channel introduction, but we cannot send people to you for repair, what we can do in online checking together with your engineers and send you parts if need to change
Hello
I need fiber laser cable for max source 1kw
may i have your email address or phone number?
Nice 👍
电路板应该是circuit board, 不是electric board
谢谢指正
Did you have WeChat to contact you?
yes, my wechat is my mobile phone number: 0086-13517268292
Muito bem
thank you, we will keep working on providing more informative vedioes about laser cutting and sheet metal fabrication
thanks
thank you for watching, hope it helps
Ipg laser system error please how could I resolve this issue
Hi mam iam Sri ram from india..iam ur instagram followers
hi, nice to meet you here again
期待您解释更详细激光器内部
好的,再接再厉
Z
95955
Q
Show
Hello. Can I have your company email?
hi,yes, my email address is: jallyqu@demarkchina.com