Been at this for 5 hours trying to get the wipers aligned properly on my 2008 Tiburon after the linkage gave out but I gave up for the time being and did a little more searing for videos and this was exactly what I was looking for took me less then 5 min to get it done after seeing this 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
This is exactly what I needed to know!! Can’t wait to fix my daughters wiper alignment when I see her!! I almost went out to buy and replace the linkage and motor! 🙏🏻🙏🏻🙏🏻🙏🏻. Love the RUclips Community❤️❤️❤️
Man I definitely appreciate this video spent 6-7 hours on a project that would have took a mechanic 1 hour max. Could not figure out how to fix the alignment to save my life this video help me out tremendously
I had the same situation. The other videos made it look so simple that I thought I’d be done pretty quickly. Hours latter I gave up trying to get the wipers in the right position. Then I saw your video. Super helpful! Needless to say the problem is fixed now. Thanks a ton!
had this issue 2 years ago. Wasn't even looking for this video when it came up. Thank you so much! I've been dealing with wipers that stop 1/4 way up the windshield!
Knowledge is a wonderful thing and being educated today by you has ended a day of pain servicing my windscreen mech. Couldn't understand why it was going so wrong. Thanks again.
Thank you for this the bolt fell off that held my motor and linkage together got that replaced but couldn't figure out why my windshield wipers were kept trying to go down farther from the home position. Not sure why other videos skip this part with the timing spent hours trying to figure it out.
Hey Chris, not sure i understand fully, but i think i have same problem as you did, just bought a new linkage for my old punto, and the wipers keep going further down than supposed to. I’ve tried realigning the arms, but then they are just too high. Did the tecnique in this video fix your problem with wipers going further down, than supposed to? Thanks in advance :)
@@POOHPOOHSMOM18 The linkage had nothing to do with the problem - this video helps if the linkage itself needs to be adjusted. For me, it was only about getting the arms to align properly on my windshield. I talked to a Fiat-specialist, and apparently if you buy brand new pair of wiper-arms, they dont have the teeth for alignment on them, from factory. The arms are made of aluminum, and the teeth on the linkage are made of steel, thus allowing the linkage-teeth to carve new teeth on the wiper-arms. I used fine sandpaper to smooth out the old teeth on the arms, and then mounted them onto the new linkage, and that fixed the issue :) hope this helps :D
You superstar!! Been trying to fix my daughters Polo- fixed the loose spindle with a couple of spot welds but was struggling to get the wiper coordination correct. Perfect video that solved it instantly- easy when you know how!!!- thank you so much.
Mate…… I am just as thankful as everyone else is in the previous 50 comments made throughout the years. I just wish I had found your video before trying to re-install. After putting a new motor on (BA Falcon) and reconditioning and reinstalling my seized linkage (which took hours) I thought I was done, until I turned wiper’s on.😳🤯 I had no patience left and had to walk away from it.🙄🤔 I watched this video the next day, Wehla, done in 15 mins.🙇🏽♂️🙏🏻🙇🏽♂️
Changed the wiper motor on my Mustang and the linkage was eating me up. After several hours of total frustration I finally took the time to look this problem up on youtube. This is the first video I came across and I can't lie, it took me all of 3 minutes to adjust the linkage. I wish I would have looked this up first as it would have saved me a lot of madness. Thank you so much for taking the time to post this informative video. Wishing you the Best !!!!!!
Thanks for this...you're my hero! Just replaced linkage in my 2012 Buick Enclave and watched another video but they ommitted the whole timing part. Life saver. Thanks man!
Just a note for anyone who has a Chevy Captiva. The alignment is the opposite of what this car is. But thank you very much for the video it did help me out a lot
This video helped me figure out how to actually fix the timing on mine and I had watched like 10 other ones so thank you so much I got mine fixed and didn’t have to take it anywhere
I’ve been at replacing my wiper motor in my 2011 VW Jetta for a hours. This video was amazing help after my wipers weren’t aligned properly. THANK YOU SO MUCH 👍👍
Your video was indeed very helpful because I just installed a new windshield wiper motor on my 09 Ford Crown Vic and when I started up the wiper blades it positioned the blades upward as its home position which clearly was not the right position but I but after seeing your video I figured out how to set it correctly. I didn't know what I was doing wrong or how to fix it, great video thanks.
Saved my bacon! So fortunate I accidentally found this video. I had no idea the manufacturer I purchased from set it up ‘backwards’ (at least it was in my case - on a Ford edge 2013)
worked great helped with my getting the wipers lined up thanks for the upload, saved tons of $ in labor. youtube is my self mechanic teacher! thanks, left a like!
I have a 2008 Saturn Astra . The wipers work but when I shut them off they stay in the upright position. Not sure how it happened but now I'm going to try to fix it. Looks like this will work
My Skoda Fabia Mk1 wipers park in the wrong position, about 10-15cm up the windscreen. Will this work for adjusting them? Ie do I just push them down to the correct position before unplugging?
Is there a way to increase the range of the wipers? My home position is good, but the finish position (i e. other end of the range of motion) is way short of getting to the driver side edge of the windshield. It's a design flaw of my model of car.
Hey I have a quick question, I too have an C5 Audi (not sure if yours is an Allroad or not), would this alignment issue cause the drivers side wiper not to come all the way to the A pillar on the drivers side?
Hi will this work on every car as my Australian GM Holden commodore wipers on intermittent stop in upright position? In speeds 1 and 2 they stop anywhere on the windscreen? So I have to time it when driving??? Very annoying. Wipers turn continuously when on and click when turning off just in all different positions? Any reply appreciated. I have googled! Asked auto parts stores, auto electrician said: probably the timer which is internal in the motor? If they were somehow re arranged? Then it would be perfect. Any reply appreciated. Cheers from Australia 🙂
Been at this for 5 hours trying to get the wipers aligned properly on my 2008 Tiburon after the linkage gave out but I gave up for the time being and did a little more searing for videos and this was exactly what I was looking for took me less then 5 min to get it done after seeing this 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Thanks for the video!!! I don't know why those who show how to change this doesn't show this part!!!!!!!!!!! Helped alot!!!
This is exactly what I needed to know!! Can’t wait to fix my daughters wiper alignment when I see her!! I almost went out to buy and replace the linkage and motor! 🙏🏻🙏🏻🙏🏻🙏🏻. Love the RUclips Community❤️❤️❤️
This vid really helped me line up the linkage with my new motor. I’d neglected to mark the original locations and was flummoxed. Now everything works!
Man I definitely appreciate this video spent 6-7 hours on a project that would have took a mechanic 1 hour max. Could not figure out how to fix the alignment to save my life this video help me out tremendously
I had the same situation. The other videos made it look so simple that I thought I’d be done pretty quickly. Hours latter I gave up trying to get the wipers in the right position. Then I saw your video. Super helpful! Needless to say the problem is fixed now. Thanks a ton!
had this issue 2 years ago. Wasn't even looking for this video when it came up. Thank you so much! I've been dealing with wipers that stop 1/4 way up the windshield!
Knowledge is a wonderful thing and being educated today by you has ended a day of pain servicing my windscreen mech. Couldn't understand why it was going so wrong. Thanks again.
Thank you for this the bolt fell off that held my motor and linkage together got that replaced but couldn't figure out why my windshield wipers were kept trying to go down farther from the home position. Not sure why other videos skip this part with the timing spent hours trying to figure it out.
Hey Chris, not sure i understand fully, but i think i have same problem as you did, just bought a new linkage for my old punto, and the wipers keep going further down than supposed to. I’ve tried realigning the arms, but then they are just too high. Did the tecnique in this video fix your problem with wipers going further down, than supposed to? Thanks in advance :)
@@dcwithw how did you fix the issue?
@@POOHPOOHSMOM18 The linkage had nothing to do with the problem - this video helps if the linkage itself needs to be adjusted. For me, it was only about getting the arms to align properly on my windshield. I talked to a Fiat-specialist, and apparently if you buy brand new pair of wiper-arms, they dont have the teeth for alignment on them, from factory. The arms are made of aluminum, and the teeth on the linkage are made of steel, thus allowing the linkage-teeth to carve new teeth on the wiper-arms. I used fine sandpaper to smooth out the old teeth on the arms, and then mounted them onto the new linkage, and that fixed the issue :) hope this helps :D
THANK YOU!!! Saved me from throwing a wrench through my Enclave's windshield. A GODSEND of a video. EXCELLENT!
You superstar!! Been trying to fix my daughters Polo- fixed the loose spindle with a couple of spot welds but was struggling to get the wiper coordination correct. Perfect video that solved it instantly- easy when you know how!!!- thank you so much.
Mate…… I am just as thankful as everyone else is in the previous 50 comments made throughout the years. I just wish I had found your video before trying to re-install. After putting a new motor on (BA Falcon) and reconditioning and reinstalling my seized linkage (which took hours) I thought I was done, until I turned wiper’s on.😳🤯 I had no patience left and had to walk away from it.🙄🤔 I watched this video the next day, Wehla, done in 15 mins.🙇🏽♂️🙏🏻🙇🏽♂️
This video saved me from a major headache! Thank you!
Changed the wiper motor on my Mustang and the linkage was eating me up. After several hours of total frustration I finally took the time to look this problem up on youtube. This is the first video I came across and I can't lie, it took me all of 3 minutes to adjust the linkage. I wish I would have looked this up first as it would have saved me a lot of madness. Thank you so much for taking the time to post this informative video. Wishing you the Best !!!!!!
Thanks for this...you're my hero! Just replaced linkage in my 2012 Buick Enclave and watched another video but they ommitted the whole timing part. Life saver. Thanks man!
Just a note for anyone who has a Chevy Captiva. The alignment is the opposite of what this car is. But thank you very much for the video it did help me out a lot
This video helped me figure out how to actually fix the timing on mine and I had watched like 10 other ones so thank you so much I got mine fixed and didn’t have to take it anywhere
I’ve been at replacing my wiper motor in my 2011 VW Jetta for a hours. This video was amazing help after my wipers weren’t aligned properly. THANK YOU SO MUCH 👍👍
This was the most helpful video I found for my problem thanks
This video helped me and worked EXACTLY how it was explained. It was driving me nuts till i found this video. God bless you man 💯
Thank you for this great vid. It helped me immensely, for reassembling the wiper trans on my 08 Subaru forester XT
Your video was indeed very helpful because I just installed a new windshield wiper motor on my 09 Ford Crown Vic and when I started up the wiper blades it positioned the blades upward as its home position which clearly was not the right position but I but after seeing your video I figured out how to set it correctly. I didn't know what I was doing wrong or how to fix it, great video thanks.
Thank you! This solved my problem exactly! Thank you man!
Saved my bacon! So fortunate I accidentally found this video. I had no idea the manufacturer I purchased from set it up ‘backwards’ (at least it was in my case - on a Ford edge 2013)
Very useful for me being someone who had no idea about to starting position
Thank you spent a long time trying to get them right
Thank ya so much, just changed a wiper trans at work and the timing was all off, had me scratchin my head for minute
Best video on youtube today for me!!
My problem is solved!! Thanks so much for doing this video!!!
👍
Thanks, this saves me a lot of headache, worked perfectly the first time
BRO - this just saved me a TON of time and hassle! Thanks!
Great Vid to get timing back!!!
worked great helped with my getting the wipers lined up thanks for the upload, saved tons of $ in labor. youtube is my self mechanic teacher! thanks, left a like!
I have a 2008 Saturn Astra . The wipers work but when I shut them off they stay in the upright position. Not sure how it happened but now I'm going to try to fix it. Looks like this will work
Thank you man exactly what I needed for my B5
Thank you! I was incredibly frustrated after I turned on the wipers on ice and misaligned my linkage
Very helpful thanks 👍
My Skoda Fabia Mk1 wipers park in the wrong position, about 10-15cm up the windscreen. Will this work for adjusting them? Ie do I just push them down to the correct position before unplugging?
Is there a way to increase the range of the wipers? My home position is good, but the finish position (i e. other end of the range of motion) is way short of getting to the driver side edge of the windshield. It's a design flaw of my model of car.
why don't they put a "FLAT" on the motor shaft AND linkage ? so it only goes on ONE WAY
if you ever come to Zagreb, beers are on me! fucking wipers!! thanks!
Thats what I was missing!! Thanks formthe help buddy! 🤙🏻
Thank you for saving my life
while this did help figure out the syncing i currently having the driver wiper not going as far as the passenger side please help
Thank you for this video.. you save my day 😅😊
Thanks, dude!
Hei. this worked with me. BUt now the wipers dont respond to the controls, they work when it suits them
Thank you so much, u just saved me some money
👍👍
Hey I have a quick question, I too have an C5 Audi (not sure if yours is an Allroad or not), would this alignment issue cause the drivers side wiper not to come all the way to the A pillar on the drivers side?
Hi I'm replacing a wiper motor for an 03 caddy deville any troubleshooting tips when rei stalling?
Thank you!❤
You the man!... Thanks!
My wipers sector be setting higher on drivers side than it once did.
Ok. That's the part I am missing....My wipers kept moving the wrong the direction and knocked the linkage loose when it moved down towards the cowl.
How did you fix this problem?
@@POOHPOOHSMOM18 exactly how this video is telling you to.
Thx.
be carfull when you moving wipers arm it may be damiging inside plastic gears
THANK YOU 👊😎
I could kiss you right now. I have to apologize to my truck for punching it
Thanks pal that sorted it!
Hi will this work on every car as my Australian GM Holden commodore wipers on intermittent stop in upright position? In speeds 1 and 2 they stop anywhere on the windscreen? So I have to time it when driving??? Very annoying. Wipers turn continuously when on and click when turning off just in all different positions? Any reply appreciated. I have googled! Asked auto parts stores, auto electrician said: probably the timer which is internal in the motor? If they were somehow re arranged? Then it would be perfect. Any reply appreciated. Cheers from Australia 🙂